The VIS 340 Plus inspection camera system features dual camera heads, giving professionals more flexibility when troubleshooting. The camera system comes with both a 1½-inch, 360-degree pan and 180-degree-tilt camera head, and a 1-inch straight camera head.
Featuring a space-saving design, the Serenity Series Cubelet Ice Machine, FS-1500MLH-C, produces up to 830 pounds of chewable cubelet ice per 24 hours. The shallow depth provides easy access to the dispenser bin.
Online coil selection software CoilPro is now available with new working fluids for the company’s full range of heat pipes. The fluids expand the range of operating temperatures for heat pipes from -30 to 200°C.
Providing operators the ability to control temperature and humidity independently, the DryCool™ Standard Dedicated Outdoor Air System (DOAS) is designed to cost effectively treat 100 percent makeup air.
For patching holes in copper and aluminum tubing, Patch Rite high-pressure patching system is simple to apply. According to the manufacturer, the key to the bonding strength of the patching system is the 0.020-inch cavity in the patch.
Expandable from 1 to 3 feet or 2 to 5 feet, a single-wall expandable-flexible gas vent connector has been specifically designed with the contractor in mind, says the company. Model EFC creates a remarkably simple connection between the appliance and the manufacturer’s Type B gas vent.
Designed for high-efficiency heat pump and air conditioning systems, the new Copeland Scroll® variable-speed compressor allows heat pumps to achieve 13 HSPF, 20-plus SEER efficiency, and 40 percent greater year-round energy savings than standard heat pumps, says the company.
The Wags (water and gas shutoff) valve is a simple, inexpensive, and reliable way to guard against disastrous water problems that can arise when water heaters develop a leak. The valve, which can be used for new or existing water heaters, is totally mechanical and can be installed with or without an electric harness.
Preprogrammed, wired, and fully tested, the KE2 fan control incorporates variable-frequency drive technology to provide fan load matching, eliminating wasted horsepower and providing a rapid and continuing payback on both upfront and payback costs.
Six 10-inch snips are available with corrosion-resistant metal to protect the tools from rust. An exclusive spring and lock mechanism allows the user to open and close the snips with one hand, while thumb and forefinger slots allow the user to push through sheet metal with ease.
RSS