While refrigeration in supermarkets information ran throughout sessions at the Food Marketing Institute Energy & Store Development Conference, it also found itself as a stand-alone topic during several concurrent breakout sessions and as a front and center focus of a general session.
This article explores how a restricted metering device will affect system performance and efficiency. The system is a commercial refrigeration system with a TXV as the metering device. The refrigerant being used is HFC-134a. Very similar results will occur if an automatic expansion valve (AXV) is used.
The actual frequency and tasks performed will vary from system to system. However, here are some generic maintenance tasks which can be applied to many refrigeration systems. These tasks can be divided into two groups: one for maintaining the cabinet and one for maintaining the refrigeration system.
A recurring theme in refrigeration over the years has been efforts to bring equipment running on hydrocarbon (HC) refrigerants to the United States market. The first foray in this regard has been to establish a beachhead in domestic refrigerators, as such equipment running on the HC propane is common in Europe.
The 3C Hybrid Condenser was developed by Muller Industries to help mitigate the impact of increasingly hot ambient conditions that are causing air-cooled refrigeration and air conditioning systems to lose cooling capacity while consuming more energy. It is particularly well suited for supermarkets with their continuous need for refrigeration.
With each passing day, more laws around the world are prohibiting the venting of refrigerants during service work. This requires contractors and technicians to update and educate themselves about the latest refrigerant recovery machines, especially when planning to purchase one.
When a refrigeration system is designed to maintain a product temperature at or below the freezing temperature of water, there will always be a necessity for the system evaporator to be defrosted at some sort of interval (due to the fact that air may contain large quantities of moisture).
With the approach of 2010, the industry will be faced with a shift in both refrigerants and system lubricants. The impending phaseout of chlorine-based refrigerants mandates that the industry move to lubricants that work satisfactorily with the new hydrofluorocarbon (HFC) refrigerants.
The correct placement and installation of a
thermostatic expansion valve’s (TXV’s) sensing bulb is important to its overall
performance and reliability. An incorrectly installed or placed sensing bulb
can lead to two major system problems.
The only fluids circulating within a refrigeration system should be refrigerant and oil. Any other fluids contained within the system may reduce its capacity and possibly cause harm to the system. One common contaminant that can enter a system is atmospheric air.
RSS
