A UVC Kit for air handlers can be used in a range of HVAC applications to destroy microorganisms including flu viruses, bacteria, and mold. It also eliminates surface biofilm to keep coils and drain pans constantly clean, saving money by reducing HVAC energy use and eliminating chemical cleanings.
The video inspection scope (TIF3880) is designed for remote inspection of areas generally inaccessible to the naked eye. It comes with a distal video camera at the end of a water-resistant shaft used for the internal inspection of HVAC systems, interior structures of walls, and many other applications.
The signature stainless steel evaporator in the compact cuber ice machines produces individual crystal clear crescent cubes. The KM-201BAH produces up to 201 pounds of ice per 24 hours with 80 pounds of storage capacity. The KM-260BAH produces up to 263 pounds of ice per 24 hours with 100 pounds of storage.
All models in the Office Pro® and Classic Plus lines of portable spot air conditioners, as well as its latest ceiling-mounted CM12 Model, have been upgraded to use the environmentally friendly refrigerant R-410A. Cooling capacity (at rating conditions of 95°F at 60 percent rh) of the units ranges from 10,500-60,000 Btuh.
The Smart Timer Controller STC-06 is a display interface device that is extremely compact and intuitive. It gives equipment manufacturers design flexibility, while giving equipment operators control over up to six channels of both time and temperature. It connects to the compact, patented Hybrid Micro Control Series process controllers.
With use of HVAC Super Pro, aluminum can be bonded to copper, aluminum, or brass without heat or expensive crimping. HVAC Super Pro, a solderless liquid bonding material, will bond any combination of copper, aluminum, or brass. According to the manufacturer, in 12 minutes the bond will hold 850 psi.
A new version of the PT250 pressure transmitter has been developed. It is designed specifically for installation in heat pump systems. Incorporating a piezo-resistive sense element, these extremely rugged, all-welded, 304L stainless steel constructed devices have an integral pipe pressure connection.
The VOC Pro™ battery-powered, portable volatile organic compounds (VOC) monitor uses sensitive photo-ionization detection (PID) technology. The monitor rapidly detects hundreds of different types of VOCs in an extensive range of 0.1 ppm (particles per million) to 20,000 ppm with the optional dilution probe.
The 1P100-ST single-phase soft start is a significant advance in solving the age-old problem of compressor-induced light flicker, says the company. The 1P100-ST can safely reduce the full-load amps to less than 100 amps, without damaging the compressor. It is available for aftermarket and OEM applications.
The Oasis™ indirect evaporative cooling system uses a corrosion-resistant polymer heat exchanger to produce dry, cool air without refrigeration. Best suited for hot, dry climates, the evaporative cooling system treats makeup air for 50 percent less energy and provides cooling energy recovery and winter heat recovery.