The clip-on temperature sensor assemblies can be used for applications where ease of installation is important and there is a need for the sensor to have good thermal contact with a copper tube, the company says. Features include an epoxy-coated NTC thermistor and a specially designed housing to seal the sensing element from the outside environment. The sensor assembly is thermally tied to the pipe via a specially designed copper clip. The design of the clip allows the housing to be installed onto a straight section of 3/8-inch copper tubing. It has a standard cable length of 3 feet and a thermistor with a ±2-percent tolerance at 77 degrees F (25 degrees C).

Advanced Thermal Products, 328 Ridgway Rd., St. Marys, PA 15857; 814-834-1541; 814-834-1556 (fax);;

eProduct #182