All of the data included in both the product grids and the photo feature were provided by the manufacturers. Therefore, questions should be directed to them via the contact information provided with the product descriptions below.

The News’ annual Heating Showcase issue is meant to be a tool for contractors to use when preparing for the heating season. If there is something additional that you would like to see in next year’s coverage, please contact Joanna Turpin at jturpin@worldnet.att.net (e-mail); 480-726-7121 (phone); 480-726-7120 (fax).

Addison Products Co.

Footprint (in inches): 19 by 19 to 83 1/2 by 36.

Serviceability features: Manufacturer did not specify.

Technical support: Manufacturer did not specify. Noise-reduction features: Optional factory-installed sound-reduction package.

Humidity-control features: Optional factory-installed humidity controls.

Additional features: Operational factory-installed water-side economizers, hot gas bypass, hot gas reheat, and microprocessor control.

Contact: Addison Products Co., Orlando, FL; attn: Gordon Nelson, 407-292-4400, ext. 296; admin@addison-hvac.com (e-mail); www.addison-hvac.com (website).

eProduct #200

Bard

Footprint (in inches): Manu-facturer did not specify.

Serviceability features: Lockable hinged service door; easy access to electrical controls and burner section; factory-installed, full-length mounting bracket and slope top.

Technical support: Technical support available locally through the Bard distributor network or via telephone to factory technical service department.

Noise-reduction features: Manufacturer did not specify.

Humidity-control features: WG-Series available with factory-installed hot gas reheat dehumidification circuit.

Additional features: WG-Series three-phase models contain phase monitor, standard; 2-in. pleated filters, standard; direct- spark ignition system with Honeywell gas valve; in-shot burners; and 18-ga stainless steel tubular heat exchanger. Exterior mounting does not require use of valuable interior floor space; WG-Series has factory- or field-installed ventilation options to meet ASHRAE IAQ standards.

Contact: Bard Manufacturing, Bryan, OH; attn: Bill Metz, 419-636-1194; bard@hvac.com (e-mail); www.bardhvac.com (website).

eProduct #201

Burnham

Footprint (in inches): G1-50 — 19.66 by 51.44; G1-125 and 250 — 28.66 by 51.44.

Serviceability features: Service not required. Access from front or top.

Technical support: Monday through Friday, 8 a.m. to 5 p.m. and a network of qualified, trained Opus wholesalers.

Noise-reduction features: “Quietest heating equipment in the industry.”

Humidity-control features: Manufacturer did not specify.

Additional features: High efficiency. Stainless steel jacket, energy management control center, stainless steel water vessel and components.

Contact: Burnham Corp., Lancaster, PA; attn: Myra Dunwoody, 717-397-4701; mdunwoody@burnham.com (e-mail); www.burnham.com (website).

eProduct #202

Burnham

Footprint (in inches): Manu-facturer did not specify.

Serviceability features: Swing-out door for cleaning. Easy-access control panel.

Technical support: Monday through Friday, 8 a.m. to 5 p.m. and a network of trained and qualified Opus wholesalers.

Noise-reduction features: Noise depleted by Residium Wave Resonator.

Humidity-control features: Manufacturer did not specify.

Additional features: High efficiency. Stainless steel jackets; commercial-grade, high-pressure steel alloy construction.

Contact: Burnham Corp., Lancaster, PA; attn: Myra Dunwoody, 717-397-4701; mdunwoody@burnham.com (e-mail); www.burnham.com (website).

eProduct #203

Burnham

Footprint (in inches): V82 — 24 by 27 1/2; V89 — 24 by 62 1/2 plus service clearance.

Serviceability features: Easy-access jacket enclosure and heat exchanger design allow access for cleaning. Name-brand-quality components. The articulated hinge on the burner door allows access for inspection.

Technical support: Monday through Friday, 8 a.m. to 5 p.m.

Noise-reduction features: ISO — quiet burner cover dampens burner noise. Jacket is fully insulated.

Humidity-control features: Manufacturer did not specify.

Additional features: Design of the cast iron heat exchanger provides greater efficiency, better steam application, and lasting durability.

Contact: Burnham Corp., Lancaster, PA; attn: Myra Dunwoody, 717-397-4701; mdunwoody@burnham.com (e-mail); www.burnham.com (website).

eProduct #204

Carrier

Footprint (in inches): Outdoor 18,000- to 36,000-Btuh units — 36.94 (w) by 14.56 (d) by 25.13 (h); outdoor 48,000- to 60,000-Btuh units — 44.56 (w) by 17.06 (d) by 37.19 (h).

Serviceability features: Removing a single panel on outdoor unit allows access to isolated compressor and control compartment, allowing service access without loss of condenser airflow. Blow-through design of the outdoor unit allows cleaning of coils without removing grilles or using fin combs. Indoor units have easy-access coils and cleanable condensate pans.

Technical support: Customer support is available at 800-227-7437.

Noise-reduction features: Outdoor units operate at sound levels as low as 68 dB.

Humidity-control features: Not applicable. Additional features: The 18,000- to 60,000-Btuh 38QR outdoor units can allow for 200-ft equivalent refrigerant line lengths, 150-ft vertical separation. Accessories such as low ambient controller and condensate pumps are available. Fancoil design allows 30% of outside fresh air to be supplied with accessory power vent kit. Supplemental electric heat is standard on all heat pump fancoils. Features such as permanent split-capacitor-type motors provide economical operation, and the rifled copper tube with louvered plate fin coil maximizes heat transfer. Indoor units feature 24-V control and can be integrated into most building control systems.

Contact: Carrier Corp., Norcross, GA; attn: DC Surface, 770-239-2121; d.c.surface@carrier.utc.com (e-mail); www.carrier.com (website).

eProduct #205

Carrier

Footprint (in inches): Outdoor 18,000-Btuh units — 28 (w) by 28 (d) by 11.75 (h); outdoor 24,000- to 36,000-Btuh units — 49.62 (w) by 28 (d) by 11.75 (h).

Serviceability features: Removing a single panel on the outdoor unit allows access to isolated compressor and control compartment, allowing service access without loss of condenser airflow. Blow-through design of the outdoor unit allows cleaning of coils without removing grilles or using fin combs.

Technical support: Customer support is available at 800-227-7437.

Noise-reduction factors: Outdoor units operate at sound levels as low as 68 dB.

Humidity-control features: Not applicable.

Additional features: Indoor units have 2- by 2-ft and 2- by 4-ft configuration, making them easy to drop into an existing ceiling grid. Indoor unit features 24-V control and can be integrated into most building control systems. The 18,000- to 36,000-Btuh 38QR outdoor units can allow for 200-ft equivalent refrigerant line length, 150-ft vertical separation. Condensate pump is standard with the indoor unit. Fancoil design allows 15% of outside fresh air to be supplied with accessory power ventilation kit. Supplemental electric heat is standard on all heat pump fancoils.

Contact: Carrier Corp., Norcross, GA; attn: DC Surface, 770-239-2121; d.c.surface@carrier.utc.com (e-mail); www.carrier.com (website).

eProduct #206

Carrier

Footprint (in inches): Outdoor 9,000- to 12,000-Btuh units — 26.1 (w) by 8.9 (d) by 23.25 (h); outdoor 18,000- to 24,000-Btuh units — 36.94 (w) by 14.56 (d) by 25.13 (h).

Serviceability features: Removing a single panel on outdoor unit allows access to isolated compressor and control compartment, allowing service access without loss of condenser airflow. Indoor units have easy-to-change, cleanable filters. High-wall systems have self-diagnostics to assist in troubleshooting.

Technical support: Customer support is available at 800-227-7437.

Noise-reduction factors: “Super quiet” due to staggered blade pattern on blower wheels.

Humidity-control features: Dehumidification mode is standard feature for the wireless infrared remote. Additional features: High-wall indoor units include freeze-up protection, high-temperature protection, and self diagnostics. The 18,000- to 24,000-Btuh outdoor units are dedicated commercial units with all safety features standard. The 18,000- to 24,000-Btuh 38BK outdoor units can allow for 200-ft equivalent refrigerant line length, 150-ft vertical separation.

Contact: Carrier Corp., Norcross, GA; attn: DC Surface, 770-239-2121; d.c.surface@carrier.utc.com (e-mail); www.carrier.com (website).

eProduct #207

Century

Footprint (in inches): 34 (h) by 17 1/2 (w) by 28 3/4 (d).

Serviceability features: Manufacturer did not specify. Technical support: National service department.

Noise-reduction features: Manufacturer did not specify.

Humidity-control features: Manufacturer did not specify.

Additional features: It is 34-in. high with a tubular heat exchanger. Upflow/horizontal and downflow models are available.

Contact: Century, Jackson, MI; attn: Scott Dennig, 517-787-2100; www.century-hvac.com (website).

eProduct #208

Coleman

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Built-in self diagnostics with fault code display. Easy-to-connect power and control wiring.

Technical support: Distributor and factory support.

Noise-reduction features: Insulated blower compartment.

Humidity-control features: Manufacturer did not specify.

Additional features: Aluminized steel, tubular heat exchanger. Two-stage heating operation includes two-stage gas valve, two-stage inducer operation, and variable-speed ECM blower operation. Variable-speed blower motor with multiple cfm selections. Two-speed induced combustion motor.

Contact: Coleman, Norman, OK; attn: Mark Ritz; 405-419-6537; mark.ritz@york.com (e-mail); www.colemanac.com (website).

eProduct #209

Coleman

Technical support: Distributor and factory support. Noise-reduction features: Insulated blower compartment.

Humidity-control features: Manufacturer did not specify.

Additional features: Aluminized steel, tubular heat exchanger, 29-4C high-grade stainless steel secondary heat exchanger. Two-stage heating operation includes two-stage gas valve, two-stage inducer operation, and variable-speed ECM blower operation. Variable-speed blower motor with 12 cooling cfm selections. No special vent termination kit required. May be installed as either two-pipe (sealed combustion) or single pipe vent (using indoor combustion air).

Contact: Coleman, Norman, OK; attn: Mark Ritz; 405-419-6537; mark.ritz@york.com (e-mail); www.colemanac.com (website).

eProduct #210

Comfort-Aire

Footprint (in inches): Approximately 171¼2 (w) by 28 (d) x 34 (h).

Serviceability features: Manufacturer did not specify.

Technical support: National service department.

Noise-reduction features: Manufacturer did not specify.

Humidity-control features: Manufacturer did not specify.

Additional features: It is 34-in. high with tubular heat exchanger. Upflow and downflow/horizontal models.

Contact: Comfort-Aire, Jackson, MI; attn: Scott Dennig, 517-787-2100; www.comfortaire-hvac.com (website).

eProduct #211

First Co.

Footprint (in inches): Maximum footprint is 25 by 28 for 5-ton model.

Serviceability features: Slide-out blower assembly, sweat-type coil connections, five moving parts. All air handlers can be installed upflow, horizontal, or downflow (downflow requires a kit; 5-ton models not approved for downflow).

Technical support: Manufacturer did not specify.

Noise-reduction features: Completely insulated cabinet and multi-speed blower/motor.

Humidity-control features: Manufacturer did not specify.

Additional features: The MBWB has an installed circulating pump and hot water check valve for water heater combinations. The MBXB-HW is for boiler applications. Both products are compatible with all residential condensing units and heat pumps. This combination air handler has a multi-function microprocessor that offers integrated boiler start relay, blower-on delay (heating), blower-off delay (cooling), compressor-restart delay, and optional freeze protector.

Contact: First Co., Dallas, TX; attn: Roger Cummins, 214-388-5751; rcummins@firstco.com (e-mail); www.firstco.com (website).

eProduct #212

Frigidaire

Footprint (in inches): 19 3/4 (w) by 27 5/8 (d) by 43 (h) and 22 1/2 (w) by 27 5/8 (d) by 43 (h).

Serviceability features: Diagnostics on circuit board with flame signal indicator. Low-voltage terminal board for field wiring. Color-coded wire harness is designed to fit the components, all with quick-connect.

Technical support: Call 800-422-4328.

Noise-reduction features: Variable-speed blower and insulation in the blower compartment.

Humidity-control features: Humidifier terminal on circuit board.

Additional features: Two-stage operation through field-supplied two-stage wall thermostat, outdoor thermostat, or time-delay relay. Simple two-stage operation with constant-speed inducer blower. Consumer Quality Pledge and warranty coverage. Every product is computer tested for product quality.

Contact: Nordyne Inc., O’Fallon, MO; attn: David Garvin, 636-561-7481; garvind@nordyne.com (e-mail); www.nordyne.com (website).

eProduct #213

Frigidaire

Serviceability features: Time and temperature defrost controls, 5-minute anti-short-cycle protection, common suction port, accumulator and hot gas muffler are standard. Technical support: Call 800-422-4328.

Noise-reduction features: One-piece top/orifice is designed for maximum airflow and quiet operation; hot gas muffler reduces compressor noise and vibration.

Humidity-control features: Variable-speed air handlers are available with dehumidification function.

Additional features: When used with the Frigidaire or Tappan variable-speed air handler, efficiency rating is 14 SEER. Consumer Quality Pledge and warranty coverage. Every product is 100% computer tested for product quality.

Contact: Nordyne Inc., O’Fallon, MO; attn: David Garvin, 636-561-7481; garvind@nordyne.com (e-mail); www.nordyne.com (website).

eProduct #214

Fujitsu General America

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Manufacturer did not specify.

Technical support: Available.

Noise-reduction features: Insulated compressor.

Humidity-control features: Dry mode.

Additional features: Four fan speeds, more capacity, auto swing louver, auto changeover, auto restart, cold prevention, moderate low ambient built in.

Contact: Fujitsu General America; attn: Mark O’Donnell, 888-888-3424; fghvac@fujitsugeneral.com (e-mail); www.fujitsugeneral .com (website).

eProduct #215

Goettl

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Easy-access multi-function control center.

Technical support: Available.

Noise-reduction features: Manufacturer did not specify.

Humidity-control features: Manufacturer did not specify.

Additional features: Anti-short-cycling protection; tangent duct connections mean that a single opening through the roof or wall is all that is required; both heat exchangers feature copper tube, aluminum fin construction using rifled tube and lance fin.

Contact: Goettl Air Conditioning, Phoenix, AZ; attn: John Ryan or Reggie Spangler, 602-275-1515; goettl@cyberspeedway.net (e-mail); www.goettl.com (website).

eProduct #216

Goettl

Serviceability features: Manufacturer did not specify.

Technical support: Available.

Noise-reduction features: Manufacturer did not specify.

Humidity-control features: Manufacturer did not specify.

Additional features: Spark to pilot ignition system, efficient inshot burners, induced draft, and powder-coated cabinet. All are equipped with a new, seamless, tubular heat exchanger.

Contact: Goettl Air Conditioning, Phoenix, AZ; attn: John Ryan or Reggie Spangler, 602-275-1515; goettl@cyberspeedway.net (e-mail); www.goettl.com (website).

eProduct #217

Luxaire

Noise-reduction features: Insulated blower compartment.

Humidity-control features: Manufacturer did not specify.

Additional features: Aluminized steel, tubular heat exchanger. Two-stage heating operation includes two-stage gas valve, two-stage inducer operation, and variable-speed ECM blower operation. Variable-speed blower motor with multiple cfm selections. Two-speed induced combustion motor.

Contact: Luxaire, Norman, OK; attn: Mark Ritz; 405-419-6537; mark.ritz@york.com (e-mail); www.luxaire.com (website).

eProduct #218

Luxaire

Footprint (in inches): Manufacturer did not specify. Serviceability features: Built-in self diagnostics with fault code display, 60-minute auto reset from lockout condition. Technical support: Distributor and factory support. Noise-reduction features: Insulated blower compartment. Humidity-control features: Manufacturer did not specify. Additional features:Aluminized steel, tubular heat exchanger, 29-4C high-grade stainless steel secondary heat exchanger. Two-stage heating operation includes two-stage gas valve, two-stage inducer operation, and variable-speed ECM blower operation. Variable-speed blower motor with 12 cooling cfm selections. No special vent termination kit required. May be installed as either two-pipe (sealed combustion) or single-pipe vent (using indoor combustion air).

Contact: Luxaire, Norman, OK; attn: Mark Ritz; 405-419-6537; mark.ritz@york.com (e-mail); www.luxaire.com (website).

eProduct #219

Mitsubishi Electric

Footprint (in inches): 12.5 by 35.5.

Serviceability features: Front service access, self-diagnostics.

Technical support: Western service manager Bob Morton, 800-811-3115; Central U.S./Latin America service manager Paul Gradillas, 800-811-3114; Eastern service manager Sean Dwyer, 800-811-3112; Southeast service manager Tony Hayes, 877-391-5550.

Noise-reduction features: 40 dB(A).

Humidity-control features: Manufacturer did not specify.

Additional features: Ductless inverter heat pump system offers up to three evaporators from a single outdoor unit. Quiet, efficient (delivers performance as needed), maintains stable indoor temperatures (no fluctuations), seven possible configurations of indoor units.

Contact: Mitsubishi Electric, Lawrenceville, GA; attn: Mike Smith, 678-376-2900; msmith@hvac.mea.com (e-mail); www.mrslim.com (website).

eProduct #220

Multiaqua

Footprint (in inches): 16.25 by 39.75.

Serviceability features: Manufacturer did not specify.

Technical support: Manu-facturer did not specify.

Noise-reduction features: <6.9 Bels, compressor/pump compartment insulated with closed cell foam.

Humidity-control features: Manufacturer did not specify.

Additional features: Chilled and hot water from one packaged unit.

Contact: Multiaqua Inc., Miramar, FL; attn: Charles Brewer, 954-431-1300; chuckb@multiaqua.com (e-mail); www.multiaqua.com (website).

Peerless Heater Co.

Footprint (in inches): 25 3/4 by 19 1/4, 22 3/4, 26 1/4, 29 3/4.

Serviceability features: Boiler controls are located in the front vestibule of the boiler; supply is located at the front top of the boiler; return is located at the front of the boiler for close installations.

Technical support: Available.

Noise-reduction features: Manufacturer did not specify.

Humidity-control features: Manufacturer did not specify.

Additional features: Designed for single, modular, or multiple boiler installations.

Contact: Peerless Heater Co., Boyertown, PA; attn: Jeffrey Alexander, 610-367-2153; marketing@peerless-heater.com (e-mail); www.peerless-heater.com (website).

eProduct #222

Raypak

Footprint (in inches): Depends on model.

Serviceability features: Front enclosed controls; separate control com-partment; point-to-point wiring; internal diagnostic LEDs; indoor-outdoor operation; direct vent without extractor.

Technical support: Nationwide coverage by dedicated technical sales representatives.

Noise-reduction features: Manufacturer did not specify.

Humidity-control features: Manufacturer did not specify.

Additional features: Serviceability and ease of trouble-shooting. Also, only Hi Delta has optional “TruSeal” that meets ASHRAE 15—1994 section 8.13.6 for direct-vent appliances, the company says. For very small footprint installations, the “SureRack” stacking system requires no offset, and all racks can be ordered to meet seismic 4 specifications.

Contact: Raypak Inc., Oxnard, CA; attn: Terri Manapol, 805-278-5300; info@raypak.com (e-mail); www.raypak.com (website).

eProduct #223

Tappan

Footprint (in inches): 19 3/4 (w) by 27 5/8 (d) by 43 (h) and 22 1/2 (w) by 27 5/8 (d) by 43 (h).

Serviceability features: Diagnostics on circuit board with flame signal indicator. Low-voltage terminal board for field wiring. Color-coded wire harness is designed to fit the components, all with quick-connect fittings.

Technical support: Call 800-422-4328.

Noise-reduction features: Variable-speed blower and insulation in the blower compartment.

Humidity-control features: Humidifier terminal on circuit board.

Additional features: Two-stage operation through field-supplied two-stage wall thermostat, outdoor thermo-stat, or time-delay relay. Simple two-stage operation with constant-speed inducer blower. Consumer Quality Pledge and warranty coverage. Every product is computer tested for product quality. Contact: Nordyne Inc., O’Fallon, MO; attn: David Garvin, 636-561-7481; garvind@nordyne .com (e-mail); www.nordyne .com (website).

eProduct #224

Tappan

Footprint (in inches): 30 1/2 by 30 1/2.

Serviceability features: Time-temperature defrost controls, 5-minute anti-short-cycle protection, common suction port, accumulator, and hot gas muffler are standard. Technical support: Call 800-422-4328.

Noise-reduction features: One-piece top/orifice is designed for maximum airflow and quiet operation; hot gas muffler reduces compressor noise and vibration.

Humidity-control features: Variable-speed air handlers are available with dehumidification function.

Additional features: When used with the Frigidaire or Tappan variable-speed air handler, efficiency rating is 14 SEER. Consumer Quality Pledge and warranty coverage. Every product is computer tested for product quality.

Contact: Nordyne Inc., O’Fallon, MO; attn: David Garvin, 636-561-7481; garvind@nordyne.com (e-mail); www.nordyne.com (website).

eProduct #225

Texas Furnace

Footprint (in inches): 28 13/16 (d) by 17 1/2, 20 1/2, or 23 1/2 (w) by 39 5/8 (h).

Serviceability features: Easy access to operating components. No door switch. Self-diagnosing operating controls. Slide-out blower assembly.

Technical support: Available.

Noise-reduction features: Designed for quietness, burners and heat exchanger with fully enclosed induced-draft motor. Enclosed burner compartment.

Humidity-control features: Manufacturer did not specify.

Additional features: Less than 40-in. tall, allows for larger coils and filter accessories. Upflow and downflow/horizontal models available. Strong, durable, lightweight design.

Contact: Texas Furnace LLC, Houston, TX; attn: Francis Franck, 713-466-1504; sales@texasfurnace.com (e-mail); www.texas furnace.com (website).

eProduct #226

Texas Furnace

Footprint (in inches): 28 13/16 (d) by 14 1/2, 17 1/2, 20 1/2, or 23 1/2 (w) by 31 5/8 (h).

Serviceability features: Easy access to operating components. No door switch. Self-diagnosing operating controls. Slide-out blower assembly.

Technical support: Available.

Noise-reduction features: Designed for quietness, burners and heat exchanger with fully enclosed induced-draft motor.

Humidity-control features: Manufacturer did not specify.

Additional features: Unit is 315¼8-in. tall, which allows for larger coils and filter accessories. Upflow, downflow, horizontal right, and horizontal left, with the vent connection from either end of the furnaces. Contact: Texas Furnace LLC, Houston, TX; attn: Francis Franck, 713-466-1504; sales@texasfurnace.com (e-mail); www.texasfurnace.com (website).

eProduct #227

Thermo Pride

Footprint (in inches): 17 by 27 1/2, 21 by 27 1/2, 24 by 27 1/2.

Serviceability features: Easily disassembled, self-diagnostic control, blower rails extend entire length of furnace, Moldex plugs on various components.

Technical support: Available at 800-348-5130, 8 a.m. to 6 p.m. EST.

Noise-reduction features: Quiet inshot burners, furnace starts on low fire, two-speed inducer, variable-speed blower

. Humidity-control features: Manufacturer did not specify.

Additional features: Can be used with one- or two-stage thermostat, 70% capacity on low fire, 100% on high fire. Timing of stages can be adjusted. G.E.’s ECM variable-speed blower motor, silicone nitride igniter, 16-ga tubular corrosion-resistant 409 stainless steel heat exchanger, 22-ga steel interlocking panel cabinet construction with durable baked enamel finish, AGA tested and design certified. The 17-in. width fits in closet applications.

Contact: Thermo Pride, Lancaster, PA; attn: Glenn Pottberg, 717-239-7645; gpottberg@thermopride.com (e-mail); www.thermo pride.com (website).

eProduct #228

Unico

Footprint (in inches): Not applicable.

Serviceability features: Manufacturer did not specify.

Technical support: Customer Service Department is available at 800-527-0896, Monday through Thursday from 7 a.m. to 7 p.m. CST, 7 a.m. to 5 p.m. CST on Fridays.

Noise-reduction features: Sound attenuation.

Humidity-control features: Manufacturer did not specify.

Additional features: Greater surface area of coil; mini-duct delivery.

Contact: Unico Inc., St. Louis, MO; attn: Earl Strauther, 314-481-9000; earl@unicosystem.com (e-mail); www.unicosystem.com (website).

eProduct #229

WaterFurnace International

Footprint (in inches): 31 by 25.

Serviceability features: Several removable access panels. Brass swivel water connections. LED fault lights and diagnostics. Removable divider panel.

Technical support: Training classes and 24/7 phone support.

Noise-reduction features: ECM variable-speed blower, compressor muffler, and blanket are standard.

Humidity-control features: Dehumidification mode, ECM2 variable-speed blower.

Additional features: First R-410A geothermal product on market; COP up to 4.3, EER up to 25.1. Coated air coil to prevent corrosion.

Contact: WaterFurnace International, Fort Wayne, IN; attn: Kent Kuffner, 219-479-3210; kent_kuffner@waterfurnace.com (e-mail); www.waterfurnace.com (website).

eProduct #230

York International

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Built-in self diagnostics with fault code display. Easy-to-connect power and control wiring.

Technical support: Distributor and factory support.

Noise-reduction features: Insulated blower compartment.

Humidity-control features: Manufacturer did not specify.

Additional features: Aluminized steel, tubular heat exchanger. Two-stage heating operation includes two-stage gas valve, two-stage inducer operation, and variable-speed ECM blower operation. Variable-speed blower motor with multiple cfm selections. Two-speed induced combustion motor. EAC and humidifier terminals.

Contact: York International, Norman, OK; attn: Mark Ritz; 405-419-6537; mark.ritz@york.com (e-mail); www.yorkupg.com (website).

eProduct #231

York International

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Built-in self-diagnostics with fault code display.

Technical support: Distributor and factory support.

Noise-reduction features: Insulated blower compartment.

Humidity-control features: Manufacturer did not specify.

Additional features: Aluminized steel, tubular heat exchanger, 29-4C high-grade stainless steel secondary heat exchanger. Two-stage heating operation includes two-stage gas valve, two-stage inducer operation, and variable-speed ECM blower operation. Variable-speed blower motor with 12 cooling cfm selections. No special vent termination kit required. May be installed as either two-pipe (sealed combustion) or single-pipe vent (using indoor combustion air). Contact: York International, Norman, OK; attn: Mark Ritz; 405-419-6537; mark.ritz@york.com (e-mail); www.yorkupg.com (website).

eProduct #232

Publication date: 10/08/2001