In addition to the Heating Showcase residential/light commercial product grid provided at the bottom of the left-hand column on our home page,The Newsalso spotlights the industry’s latest residential/light commercial heating units in the following feature. The manufacturers provided us with the information and brief description of features included with each product. For more information, please contact the manufacturers or their distributors.

Armstrong Air Conditioning

Model:Concord CHU10 Series
Footprint (in.):22 by 22 (2.5 tons) to 30 by 30 (3 to 5 tons)
Serviceability features:Wiring diagram and charging chart on the back of the control panel.
Technical support:AAC Inc. distributor service representative program, AAC Inc. Technical Service Department with toll-free telephone number.
Noise-reduction features:Discharge line muffler.
Humidity-control features:Can be used with variable-speed indoor units.
Additional features:Simple time/temperature defrost control board. Versatile installation characteristics are a result of 45-degree service valve orientation and a small footprint.
Contact:Armstrong Air Conditioning, Bellevue, OH; attn: Al Knight, 419-483-4840; www.concord-air.com (website).

eProduct #216

Bard Manufacturing Co.

Model:Wall-mount gas-electric unit
Footprint (in.):Mounted on exterior of building.
Serviceability features:Lockable, hinged service door; easy access to electrical controls and burner section; factory-installed full-length mounting bracket; slope top.
Technical support:Available locally through the Bard distributor network or via telephone to the Bard Technical Service Department (8:00 a.m. to 5:00 p.m.).
Noise-reduction features:Manufacturer did not specify.
Humidity-control features:Available with factory-installed hot gas-reheat dehumidification circuit.
Additional features:Provides maximum indoor comfort at minimal cost, the company says; exterior mounting does not require use of interior floor space; factory- or field-installed ventilation options help meet ASHRAE indoor air quality standards. Available with energy-recovery ventilation options (economizer and commercial room ventilator). An 18-ga stainless steel tubular heat exchanger, in-shot burners, direct spark ignition system with Honeywell gas valve, and 2-in. pleated filters are standard; three-phase models contain a phase monitor as standard.
Contact:Bard Manufacturing Co., Bryan, OH; attn: Bill Steel, 419-636-1194; bard@bardhvac.com (e-mail); or www.bardhvac.com (website).

eProduct #217

Bryant Heating and Cooling

Model:Model 683B dual-fuel heat pump
Footprint (in.):33 (w) by 48-1/2 (l) and 44-1/2 (w) by 48-1/2 (l); height varies from 35 to 43.
Serviceability features:Single-panel access with internal blower door for ease of service and installation. “Envirotuff” composite base with built-in drainage that will never rust, the company says. Converts to down discharge with the removal of two panels within the base. High- and low-pressure switches, filter-drier, and over-current protection are all standard, as are the louvered grilles.
Technical support:800-428-4326 (24 hours a day, seven days a week) or www.bryant.com (website).
Noise-reduction features:Foil-faced insulation throughout the unit that is cleanable and provides a sound barrier; major components (i.e., compressor) are seated in the composite base to help reduce vibration; sound levels are as low as 72 dB.
Humidity-control features:Variable-speed blower motor option coupled with the Thermidistat™ control provides the ultimate in PerfectHumidity™, the company says.
Additional features:Highest SEER rating in a duel-fuel packaged product, the company says. Built with Puron® (R-410A) refrigerant and available in single- and three-phase versions. The dual-fuel, variable-speed blower motor option provides humidity control, low sound ratings, economical constant fan, and other comfort features, the company says. Low-NOx units are available; operation down to 40 degrees F with standard motor and 55 degrees with variable-speed motor; must be installed with either the specially designed, dual-fuel thermostat or the Thermidistat™ control. Additional coil protection is available as a factory-installed option. Short-cycling protection is standard for compressor protection. The unit can be converted to propane. High-altitude kits are available.
Contact:Bryant Heating and Cooling, Indianapolis, IN; attn: Andrea Dopp, 317-240-5672; andrea.dopp@bryant.com; or www.bryant.com (website).

eProduct #218

Model: Model 698B heat pump
Footprint (in.): Manufacturer did not specify.
Serviceability features: This two-speed R-410A unit uses one compressor, one contactor for simple service.
Technical support: Local distributor training and support with factory backup support.
Noise-reduction features: Manufacturer did not specify.
Humidity-control features: With Thermidistat (thermostat) control and variable-speed indoor blower, the unit can remove up to 30 times more moisture, the company says.
Additional features: Efficiency ratings are as high as 16 SEER with 12.3 EER, along with 9.1 HSPF.
Contact: Bryant Heating and Cooling, Indianapolis, IN; attn: Craig Kersten; www.bryant.com (website).

eProduct #219

Burnham Corp.

Model:OPUS gas and oil boilers
Footprint (in.):Manufacturer did not specify.
Serviceability features:View sell sheets at www.aboutopus.com (website).
Technical support:Manufacturer did not specify.
Noise-reduction features:Well insulated for quiet operation, the company says.
Humidity-control features:Manufacturer did not specify.
Additional features:OPUS utilizes high-quality materials and innovative design and construction to deliver tremendous efficiency and superior performance, the company says. From the stainless steel construction to the commercial-quality construction of the oil heat exchanger, the line “showcases American ingenuity at its finest,” the company states. OPUS offers efficiencies up to 99% for the gas and 90.1% for the oil product.
Contact:Burnham Corp., Lancaster, PA; attn: Daisy Lilley, 717-397-4701; info@burnham.com (e-mail); www.burnham.com (website).

eProduct #220

Carrier Corp.

Model:38YDB heat pump
Footprint (in.):Manufacturer did not specify.
Serviceability features:This two-speed R-410A unit uses one compressor, one contactor for simple service.
Technical support:Local distributor training and support with factory backup support.
Noise-reduction features:Manufacturer did not specify.
Humidity-control features:With Thermidistat (thermostat) control and variable-speed indoor blower, the unit can remove up to 30 times more moisture, the company says.
Additional features:The two-speed units deliver as high as 17 SEER with 13 EER.
Contact:Carrier Corp., Indianapolis, IN; attn: Craig Kersten; 800-Carrier (800-227-7437); www.carrier.com (website).

eProduct #221

Model: 48JZ dual-fuel heat pump
Footprint (in.): Two sizes: 33 (w) by 48-1/2 (l) and 44-1/2 (w) by 48-1/2 (l); height varies from 35 to 43.
Serviceability features: A single-panel access with internal blower door offers ease of service and installation. An Envirotuff composite base with built-in drainage will never rust, the company says. Unit converts to down discharge with the removal of two panels within the base. High- and low-pressure switches, filter-drier, and over-current protection are standard, as are the louvered grilles.
Technical support: Call 800-227-7437 (24 hours a day, 7 days a week) or visit www.carrier.com (website).
Noise-reduction features: Foil-faced insulation throughout the unit that is cleanable and provides a sound barrier; major components (i.e., compressor) are seated in a composite base to help reduce vibration; sound levels are as low as 72dB.
Humidity-control features: Variable-speed blower motor option coupled with the Thermidistat™ control provide IdealHumidity™, the company says.
Additional features: One of the highest SEER ratings in a dual-fuel, packaged product, the company states. Unit comes with R-410A and is available in single- and three-phase versions. A dual-fuel, variable-speed blower motor option provides humidity control, low sound ratings, economical constant fan, and other features. Low-NOx units are available; operation down to 40 degrees F with standard motor and 55 degrees with variable-speed motor; must be installed with either the specially designed dual-fuel thermostat or Thermidistat™ control. Additional coil protection is available as a factory option. Short-cycling protection is standard for compressor protection. The unit can be converted to propane; high-altitude kits are available.
Contact: Carrier Corp., Indianapolis, IN; attn: Andrea Dopp, 317-240-5672; andrea.dopp@carrier.utc.com; or www.carrier.com (website).

eProduct #222

Model: Expressions Console ductless 53CS/53SB
Footprint (in.): 12-5/8 by 43-3/8
Serviceability features: Built-in diagnostics.
Technical support: Monday through Friday, 8:00 a.m. to 4:00 p.m. ET, 315-432-7367 or 315-432-3944.
Noise-reduction features: Insulation.
Humidity-control features: Dehumidification mode.
Additional features: Unit can be installed as a floor console or mounted under a ceiling. Unit is capable of cooling adjacent rooms, the company states.
Contact: Carrier Corp., Syracuse, NY; attn: Tom White, 315-432-7006; tom.white@carrier.utc.com (e-mail); or www.carrier.com (website).

eProduct #223

Coleman/Luxaire/York

Model:Models DYP and DNP single package cooling-heating unit
Footprint (in.):49-1/8 by 47-1/4
Serviceability features:Compact cabinet, up and horizontal application, slide-out blower assembly, separate blower and burner door for accessibility. Belt-drive blower offers easy access to blower motor.
Technical support:First level of support provided by distribution; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7:00 a.m. to 6:00 p.m. ET.
Noise-reduction features:Manufacturer did not specify.
Humidity-control features:120-V output located on control board for power humidifier accessory.
Additional features:Compact cabinet; 13-SEER efficiency level with factory-installed TXV. Field-installed economizer and roof curb are available.
Contact:Coleman/Luxaire/York Corp., Norman, OK; attn: Andy Fracica, 405-419-6563; andy.fracica@york.com (e-mail); www.yorkupg.com (website).

eProduct #224

ECR International

Model:Oneida Royal HOB, LOB oil furnace
Footprint (in.):HOB is 22 (w) by 31 (l), LOB is 22 (w) by 51-1/2 (l).
Serviceability features:Same control board for direct- or belt-drive units. Control and wiring system is within a slide-out tray; accessible blower; electronic fan timer with built-in thermostat connections. Cleanouts extend into furnace vestibule, eliminating air-side contamination, the company says. Spade connector speed selection available on direct-drive blowers. Ready for A/C, humidifier, or electronic air cleaner.
Technical support:Call 315-797-1310 8:00 a.m. to 5:00 p.m. ET.
Noise-reduction features:All panels around heat exchanger are insulated with foil-back insulation. Solenoid valve provides clean and quiet burner starts and stops.
Humidity-control features:Humidifier terminal on fan timer board.
Additional features:The unit features a single-pass round chamber and electronic fan timing that is A/C ready. Both direct- and belt-drive models use the same control board. Each unit comes with a vestibule, galvanized bases and inner panels for corrosion resistance. Fan timer board comes with electronic air cleaner and humidifier connections. HOB units are multiposition. HOB/LOB units are both belt- and direct-drive certified.
Contact:ECR International, Dunkirk, NY; attn: Mark Belcher, 716-366-5500; markb@dunkirk.com (e-mail); www.ecrinternational.com (website).

eProduct #225

Excel Comfort Systems

Model:Ducane SH10B heat pump
Footprint (in.):2- to 3.5-ton units are 39 (l) by 39 (w) by 30 (h); 4- and 5-ton units are 48 (l) by 48 (w) by 30 (h).
Serviceability features:Color-coded wiring for easy service. External service gauge ports.
Technical support:803-284-5347 or 803-284-5342, 8:00 a.m. to 6:00 p.m. ET.
Noise-reduction features:Insulated blower compartment to reduce sound.
Humidity-control features:Manufacturer did not specify.
Additional features:Compact footprint.
Contact:Excel Comfort Systems, Blackville, SC; attn: Walt Ashcraft, 803-284-5305, walt.ashcraft@excel-csi.com (e-mail); www.ducanehvac.com (website).

eProduct #226

First Co.

Model:MBXB-HW Series air handler
Footprint (in.):20 by 20 (1.5-ton model) and 28 by 25 (5-ton model)
Serviceability features:This product includes heating and cooling (DX or R-410A) coils. All components are accessible from the front of the unit.
Technical support:Call Tommy Zear at 214-388-5751, ext. 1145.
Noise-reduction features:Cabinets are fully insulated for sound attenuation.
Humidity-control features:Manufacturer did not specify.
Additional features:This boiler-loop air handler includes a state-of-the-art microprocessor that controls all operational functions, including boiler start relay, fan-off delay (heating and cooling modes), and fan-on delay (heating mode). All models include a multispeed blower, factory-installed horizontal drain pan, blower door switch (except 5 ton), slide-out coil design, manual air vent on hot water coil, threaded drain connections, and powder-coated cabinet. Expansion valve kits are optional.
Contact:First Co., Dallas, TX; attn: Harold Hammer, 214-388-5751, ext. 1109; hhammer@firstco.com (e-mail); www.firstco.com (website).

eProduct #227

Goodman Manufacturing Co.

Model:Goodman, Janitrol, GMC Model PHKJ 12-SEER pack-aged heat pump
Footprint (in.):63.15 by 32.15 by 29.62, or 63.15 by 32.15 by 34.62
Serviceability features:Convenient access panels.
Technical support:Call 888-593-9988.
Noise-reduction features:Manufacturer did not specify.
Humidity-control features:Manufacturer did not specify.
Additional features:Side-by-side application; fully insulated air-handling compartment.
Contact:Goodman Manufacturing Co., Houston, TX; attn: Chuck Russ, 713-861-2500; russcharles@excite.com (e-mail); www.goodmanmfg.com (website).

eProduct #228

Heat Controller

Model:Century Patriot Series “low boy” oil furnace
Footprint (in.):Manufacturer did not specify.
Serviceability features:Accessible cleanout ports allow heat exchanger service. Honeywell fan/limit.
Technical support:Manufacturer did not specify.
Noise-reduction features:Foil-faced, high-density fiberglass insulation gives durable insulating heat and sound protection, the company says; high-temperature ceramic combustion chamber provides quiet, high-efficiency combustion.
Humidity-control features:Manufacturer did not specify.
Additional features:The corrosion-resistant cabinet is constructed of heavy-gauge steel with a baked enamel finish. The primary heat exchanger is constructed of heavy-duty, 14-ga steel.
Contact:Heat Controller, Jackson, MI; attn: Brian King, 517-787-2100; www.heatcontroller.com and www.century-hvac.com (websites).

eProduct #229

Model: Century water-source heat pumps (VGY and HGY)
Footprint (in.): Manufacturer did not specify.
Serviceability features: Seven recessed access panels, electromechanical controls, stainless steel drain pan, and third service port standard.
Technical support: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
Humidity-control features: Dehumidistat.
Additional features: The VGY Series are efficient and “don’t burn fuel like fossil fuel-based units,” the company says, usually delivering three to four times more energy than they consume. An integral desuperheater allows excess heat to be used in the summer months to heat domestic hot water.
Contact: Heat Controller, Jackson, MI; attn: Brian King, 517-787-2100; www.heatcontroller.com and www.century-hvac.com (websites).

eProduct #230

Model: Comfort-Aire hydronic air handler, Model AHB
Footprint (in.): Manufacturer did not specify.
Serviceability features: Manufacturer did not specify.
Technical support: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
Humidity-control features: Manufacturer did not specify.
Additional features: Heating blower time delay; 3/4-in. water connections; hydronic freeze protection/evaporator freeze protection; terminal strip; and standard air filters.
Contact: Heat Controller, Jackson, MI; attn: Brian King, 517-787-2100; www.heatcontroller.com (website).

eProduct #231

Model: Comfort-Aire Patriot Series “high boy”
Footprint (in.): Manufacturer did not specify.
Serviceability features: Accessible cleanout ports allow heat exchanger service. Honeywell fan/limit.
Technical support: Manufacturer did not specify.
Noise-reduction features: High-temperature ceramic combustion chamber provides quiet, high-efficiency combustion, the company says. Foil-faced, high-density fiberglass insulation gives durable insulating heat and sound protection.
Humidity-control features: Manufacturer did not specify.
Additional features: Available in upflow, downflow, horizontal, front- or rear-flue configuration. State-of-the-art burner with flame-retention head, PSC motor, and solid-state ignition.
Contact: Heat Controller, Jackson, MI; attn: Brian King, 517-787-2100; www.heatcontroller.com (website).

eProduct #232

Ice Cap Inc.

Model:RSK or RSCT heat pump for use with hot water or steam coils
Footprint (in.):36 by 15
Serviceability features:Units are serviceable from inside the residence.
Technical support:Available as needed.
Noise-reduction features:Insulation installed in chassis and room enclosure for efficiency and sound attenuation.
Humidity-control features:The line of PTACs and PTHPs are available in all types of heating — electric, heat pump, and for use with hot water or steam coils attached.
Additional features:PTACs offer zoned comfort for air conditioning and heating. They are available with a line of furniture-grade custom sheet metal enclosures.
Contact:Ice Cap Inc., Long Island City, NY; attn: Glenn Haun, 718-729-7000; sales@icecap.com; www.icecap.com (website).

eProduct #233

Peerless Heater Co.

Model:Pinnacle stainless steel boiler
Footprint (in.):22-1/4 by 21, to 30-3/4 by 21
Serviceability features:Access to all components from top and front. LED light control board confirms sequence of operation to identify problem area. Gas, water, and electrical connections from left side.
Technical support:45 reps in all states and technical service representative at Peerless.
Noise-reduction features:Quiet operation.
Humidity-control features:Manufacturer did not specify.
Additional features:State-of-the-art control board and the gas valve/venturi system provide precise and accurate burner output. Stainless steel heat exchanger and burner. Easy to install and service. High AFUE.
Contact:Peerless Heater Co., Boyertown, PA; attn: Jeffrey Alexander, 610-367-2153; marketing@peerless-heater.com (e-mail); www.peerless-heater.com (website).

eProduct #234

Reznor/Thomas & Betts Corp.

Model:Reznor V3 Series, Model UDAP (power vented) and UDAS (separated combustion)
Footprint (in.):Unit suspended from ceiling.
Serviceability features:Service compartment is accessible from side door.
Technical support:For service questions, call 800-695-1901 during normal business hours in each time zone throughout North America.
Noise-reduction features:Operation between 40 and 62 dBA at 15 ft, depending on size of unit.
Humidity-control features:Manufacturer did not specify.
Additional features:The V3 Series has 83% efficiency due to the new Tcore2® heat exchanger and burner system. The low profile means added head clearance. The cabinet has a high-gloss, corrosion-resistant finish. The series also offers high-output air delivery while maintaining low emission levels. Easy installation. Approved for use in North America, Europe, and Asia.
Contact:Reznor/Thomas & Betts Corp., Memphis, TN; 800-695-1901, ext. 1; hvacadmin@tnb.com (e-mail); www.reznoronline.com (website).

eProduct #235

Sanyo Fisher Co.

Model:Gas heater air conditioner, Model 14KGS11
Footprint (in.):29 by 12 by 31
Serviceability features:Self-diagnostics.
Technical support:Call 770-509-5230.
Noise-reduction features:Indoor 54 dBA; outdoor 43 dBA.
Humidity-control features:Manufacturer did not specify.
Additional features:Unique operation; unlike heat pump, it has no defrost cycle. Has 55 degree delta T warm-air temperature blow into room; operation has no limit down to -20 degrees F, the company says. High-efficiency, noncondensing unit with heating and normal A/C cycle.
Contact:Sanyo Fisher Co., Chats-worth, CA; attn: Tom Crock, 818-998-7322; www.sanyohvac.com (website).

eProduct #236

Texas Furnace LLC

Model:Meridian VL/VLX Series
Footprint (in.):Not greater than 20-1/5 by 22.
Serviceability features:Easy-to-remove access panels, allowing access to service and electrical components.
Technical support:E-mail questions 24 hours a day to listen@texasfurnace.com, or call 713-466-1504. Service information is also available at www.texasfurnace.com (website).
Noise-reduction features:Fully insulated cabinet.
Humidity-control features:Manufacturer did not specify.
Additional features:Numerous contractor-focused features for easy installation and service. Built to match virtually any manufacturer’s air conditioner or heat pump, the company says. All units are ARI listed and rated. Units may be flush mounted in the wall and utilize optional front-return grille, suspended on a wall, or mounted on a platform for a bottom-return air installation. Cabinet side panels come prestamped with mounting bracket for flush or wall installations. Suited for multifamily installations.
Contact:TX Furnace LLC, Houston, TX; attn: Francis Franck, 713-466-1504; listen@texasfurnace.com (e-mail); www.texasfurnace.com (website).

eProduct #237

Thermo Pride

Model:Oil, gas furnace
Footprint (in.):Manufacturer did not specify.
Serviceability features:Easy access to all components; maintenance friendly; parts readily available, the company says.
Technical support:Call 800-348-5130 from 8:00 a.m. to 5:00 p.m. ET.
Noise-reduction features:Quiet operation.
Humidity-control features:Manufacturer did not specify.
Additional features:Hand-made rounded corners. Transferable warranty. Easily disassembled and reassembled in basement due to slip-lock design of units, the company says.
Contact:Thermo Pride, Lancaster, PA; attn: Stefanie DePugh, 717-239-7647; info@thermopride.com (e-mail); www.thermopride.com (website).

eProduct #238

WaterFurnace International

Model:Premier E geothermal heat pump
Footprint (in.):31 by 26 (3 to 6 tons) and 26 by 23 (2 to 3 tons)
Serviceability features:Manufacturer did not specify.
Technical support:Manufacturer did not specify.
Noise-reduction features:Manufacturer did not specify.
Humidity-control features:Manufacturer did not specify.
Additional features:Geothermal units use Bristol Twin Single™ compressor and R-410A refrigerant.
Contact:WaterFurnace International, Fort Wayne, IN; 800-222-5663; www.waterfurnace.com (website).

eProduct #239

York International Corp.

Model:E4TS heat pump
Footprint (in.):35 by 35
Serviceability features:The “Guard V” provides LED diagnostics. Single-side, one-panel service access aids accessibility.
Technical support:First level of support provided by distribution; factory support available by calling 877-874-7378 (877-UPG-SERV). Support is available from 7:00 a.m. to 5:00 p.m. Central Time.
Noise-reduction features:Mufflers, compressor mounts, and specially designed sound blankets help reduce sound and vibration.
Humidity-control features:The ability to operate at two levels, a “Stealth” system that delivers better humidity control, as well as reduced air stratification and more efficient air filtration, the company says.
Additional features:The Stealth Hot Heat Pump features the Twin Single™ compressor for two levels or stages of heating or cooling. The heat pump can deliver heating discharge temperatures up to 30% higher than conventional heat pumps, solving the predicament of “cold blow” inherent with heat pumps, the company says.
Contact:York International Corp., Norman, OK; attn: Mark Ritz, 405-419-6537; mark.ritz@york.com (e-mail); www.yorkupg.com (website).

eProduct #240

Model: P4HUE30N13006 gas furnace
Footprint (in.): 32-1/4 (w) by 28-1/2 (l)
Serviceability features: Compact cabinet, up and horizontal application, slide-out blower assembly, separate blower and burner door for access. Belt-drive blower offers access to blower motor.
Technical support: First level of support provided by distribution; factory support available by calling 877-874-7378 (877-UPG-SERV). Support available from 7:00 a.m. to 5:00 p.m. Central Time.
Noise-reduction features: Manufacturer did not specify.
Humidity-control features: 120-V output located on control board for power humidifier accessory.
Additional features: Compact cabinet doesn’t consume much space. Accessory twinning control available.
Contact: York International Corp., Norman, OK; attn: Mickey Smith, 405-419-6541; mickey.smith@york.com (e-mail); www.yorkupg.com (website).

eProduct #241

For more information, contact the manufacturers listed or their distributors.

Publication date: 09/30/2002