Both series complement each other and are essential for preventing mechanical damage as well as premature insulation degradation from ultraviolet (UV) light, and animal and insect pests.
The Natatorium Ventilation (NV)-Series is a compact, non-compressorized ventilation system for conditioning natatorium environments with outdoor air and heat recovery, but without compromising indoor air quality (IAQ).
Available in sizes up to 65,000-CFM, the NV-Series is designed specifically for indoor pool and waterpark environments ideally located in cooler, drier summer climates.
The Whispertherm™ Integrated Thermal Recovery unit with energy recovery module was designed to benefit the environmentally conscious owner by efficiently introducing outdoor air into the occupied space. Rather than directly discarding exhaust air from the occupied space, the energy is transferred to the incoming fresh air. As a result, less energy is required to bring fresh air to the indoor conditions.
Available in early 2018, the ProLine XE Combi Boiler is engineered with residential building professionals in mind. By moving critical components, such as the built-in circulator, to an easily accessible location within the unit, service and maintenance are dramatically simplified.
The TDWLB series wireless pressure and temperature transducer is ideal for applications where short-term datalogging is required and a Wi-Fi or Ethernet connection isn’t available; for example HVAC technicians who need to gather pressure and temperature data to diagnose issues with AC and refrigeration systems.
Green Link Adhesive/Sealant bonds and seals the KnuckleHead Universal Base and is effective on a wide range of roof surfaces. The adhesive/sealant has been specially formulated to adhere to PVC, EPDM, TPO, and Mod Bit, as well as the KnuckleHead base itself, which is composed of glass-reinforced nylon.
The Opt2MAX motor features a 56/140 frame motor that comes pre-programmed with an integrated drive and provides seamless transition from high to low speed. Available in 1–10 HP, it is designed for direct drive and belt drive applications.
The motor is intended for use in rooftop units, air handlers, exhausters, condenser and chiller fans, and other variable torque load applications.
The Sentinel Pro system can interface with any HVACR equipment that uses a programmable logic controller (PLC) with Modbus sensors. Only one Sentinel PRO device is required to monitor up to 64 Modbus registers and 12 different digital or analog status conditions for HVAC equipment, boilers, chillers, refrigeration, and cold storage units.
A hot water recirculating system can save homeowners a significant amount of water – up to 12,000 gallons per year. But continuously running circulators and improperly programmed timers can waste energy by operating the circulator and hot water heater at times when hot water isn’t needed.
Expanding on the success of the Atherion B and C cabinets, the Atherion D cabinet greatly expands Modine’s offering by doubling the cooling capacity and nearly tripling the gas heating capacity. In addition, the Atherion D cabinet comes with top mounted PF™ Aluminum Microchannel condenser coils with EC condenser fan motors and right and left side access doors for ease of blower, filter, damper and heat section maintenance.
RSS
