The FridgeCare humidity control system is designed for the refrigeration industry. Installed in commercial walk-in refrigeration coolers, the FridgeCare filters are designed to reduce temperature and humidity fluctuations and maintain optimum humidity levels, thereby extending the shelf life of perishables.
The water-sensing device is a small, sensitive, fully encapsulated electronic circuit. It controls an isolated, powerful 5-A relay that can be added to the secondary drain pans for air-handling equipment, hot water heater safety pans, or wherever there is a need for protection from catastrophic water damage.
A line of climate control compressors, tailored for the HVAC industry, provides a wide variety of options for pressurized heating and cooling system lines. Twenty-two models in single- and two-stage simplex configurations, as well as single- and two-stage duplex designs are available.
The laser-cut, all-welded construction Retro-Mate® adapters offer a fast, cost-effective method of replacing rooftop HVAC units. The old rooftop unit is removed and then the adapter is installed on top of the existing curb to adapt it to the new rooftop unit.
Tempguard® PTR1SSB-HGHG pass-through refrigerators feature the Evercheck® audio-visual control center, ducted airflow for consistent cabinet temperature, epoxy-coated shelves adjustable in 1-inch increments, and perimeter door heaters (with backups) to provide condensation control.
TracPipe commercially sized tees are designed to eliminate the need for labor-intensive black iron fittings when making gas piping connections. Available in 24 variations up to 2 inches in diameter, the tees feature the AutoFlare® attachment on all three sides.
The SuperStor Contender Solar is a new line of indirect water heaters, designed specifically for solar thermal applications. The units store hot water from one or more solar collectors while providing either electric or boiler backup for when the available solar power cannot meet hot-water demand.
The HVAC Guide™ guided probe tester is a hand-held instrument that leads field technicians step-by-step through the most common HVAC tests, including target evaporator exit temp, superheat, subcooling, and combustion analysis.
ExpressPack™ is a multitube
steam dispersion panel that accepts atmospheric source steam and discharges it
into a duct or air-handling unit. According to the manufacturer, it is designed
with a series of unique dispersion tubes spaced to provide a shorter nonwetting
distance.
The 1F85RF-275
White-Rodgers® wireless remote sensor and thermostat kit includes a
universal thermostat for single-stage, multistage, or heat pump systems and a
wireless indoor remote sensor. The remote sensor comes synchronized to the
thermostat and can be placed up to 200 feet away.
RSS