The set includes a red EZ Turn® Hose, a blue EZ Turn Hose with an EZ Access “T” Fitting built into the middle of the hose for micron gauge connection and hose purging, a 3/8-inch charging and vacuum hose with a full-flow ball valve shutoff, plus two refrigerant tank adaptors.
This pre-engineered, centrifugal fume exhaust packaged model offers extended discharge to reduce and prevent exposure to harmful fumes and odors outdoors. It is designed per ANSI Z9.2 standard for local exhaust systems.
These pliers are designed for simple and reliable clamping of 1- and 2-ear clamps. Available in front-jaw, dual-front, and side-jaw options, the pliers are designed to not damage the press points on the ear clamps of a workpiece.
These systems are manufactured for 6- to 96-inch pipe diameters (150-2,440 mm) and are equipped with a QuickFit coupling for the purge/inflation hose. The QuickFit coupling is fitted with an O-ring for gas-tight sealing.
This induced-draft counterflow cooler features an evaporative fluid cooler flexible enough to meet a range of cooling needs. Process fluid is cooled by recirculating water that flows over the outside of heat transfer coils as air induced through the cooler evaporates a small portion of the recirculating water.
This home automation system enables homeowners to secure, control, and remotely manage their homes’ most critical systems from a mobile app. It provides homeowners a single solution to connect their heating and cooling, safety, and security systems.
The motor’s design uses permanent magnets in a synchronous motor topology with a controller that quickly gets the motor to its targeted speed and then efficiently shifts the motor to AC power (50 or 60 Hz) supplied directly from the grid.
This series of portable evaporative coolers features designs engineered to generate significant airflow and provide cooling options for a variety of hot working environments.
Capable of producing 800 lumens of output on its high mode, the flashlight can also cast a beam up to 375 yards in spot mode. In its low mode, it produces 325 lumens and offers run times up to seven hours.
These single-package rooftop units are available in 50- to 65-ton cooling capacities. The units offer double-wall construction, single-point power connection, and efficiency ratings that exceed ASHRAE 90.1 standards.