My Feb. 7 column focused on ice flake machine troubleshooting. I will have more to say on that specific topic in my April 4 column. For this column, I want to take a look at amperage as it relates to HVACR compressors.
Emerson Climate Technologies Inc. recently acknowledged its top-performing wholesalers for outstanding sales performance in 2010. Exceptional wholesalers were presented awards in four different sales categories: Peak Performance, Summit, Signature, and Center Stage. The awards were handed out during the company’s annual National Wholesaler Conference, which was held in Tucson, Ariz.
Bob got a call from the dispatcher to go to an office building that has a 3-ton heat pump compressor that has been shutting off after startup. The fan would continue to run. The building maintenance man said that he had observed the shutting down of the compressor several times.
Nearly 55,000 people ambled through the Las Vegas Convention Center during three days of non-stop activity at the industry’s largest trade show. A typical Wednesday at the expo is usually considered a light day for foot traffic. But even on the last day of the show, attendees were drawn to the 1,800-plus exhibitors’ booths displaying the latest HVACR products.
When multiple compressors are piped together with a common
suction and discharge header - such as with the arrangement of a parallel rack
configuration - oil return to each compressor is a major concern. Typical oil
recirculation rates are dependent on three factors.
Emerson Climate Technologies marked a milestone in
December 2010 when the 150,000th Copeland Scroll digital compressor was shipped
to the marine container industry. Emerson shipped its
first scroll digital compressor for refrigerated seagoing containers in 2002,
and now builds the compressors in two facilities worldwide.
Many servicemen experience service calls where the compressor has both a low head pressure and a high suction pressure. There are three main reasons why a reciprocating compressor will simultaneously have a low head pressure and a high suction pressure.
The compressor’s discharge temperature can tell the service technician what is going on inside a refrigeration or air conditioning system. The compressor’s discharge temperature is a reflection of the hottest part of a refrigeration system, and there are limits as to how hot a discharge temperature should be. This article will explore discharge temperatures and their limits.
The compressor's discharge temperature is often an overlooked temperature when troubleshooting a refrigeration or A/C system. However, it's very important because it's an indication of the amount of heat absorbed in the evaporator and suction line, and any heat of compression generated by the compression process.
What should the amperage draw be of a compressor in which the nameplate says the RLA (rated load amperage) is 59.6, but the compressor is only pulling 45 amps? Is there a problem here? Do we need to change the compressor?
RSS
