This article provides tips on how to tell when a motor is overloaded and what can be done with a new replacement direct-drive fan or blower motor when little or no speed change can be detected from one connection to the next.
System effect is the negative impact on fan performance that results when the fan is connected to a duct system. This article explains system effect, what causes it, and how to overcome it.
It is an accepted fact that pumps are oversized for almost all industrial and commercial installations. The tips here illustrate simple circuit flow analysis techniques to establish methods for flow balance in existing buildings and permit a considerable reduction in pump power requirements.
Electromagnetic compatibility (EMC) is the ability of electrical/electronic equipment to operate in its installation environment while neither causing nor experiencing electromagnetic interference (EMI). Here is a review of EMC standards and recommendations for drives specifiers.
The Alliance to Save Energy's recent "Great Energy Efficiency Debate" in Washington included a
lone HVAC representative - James Wolf of Trane. Wolf agreed to talk with The News about his panel's discussion and comment further on the issues raised.
You use electricity every day of your life, so it is easy to take it for granted. Yet electricity is a major cause of injury on the job. This article provides tips on how to work on electrical equipment safely, avoid accidents, and avoid damage to equipment.
The solar heating, air conditioning, power, and lighting system installed at the guard station of the Pentagon Heating and Refrigeration Plant is one of the most advanced solar energy systems in the U.S. Despite its modest appearance, the system incorporates 12 advanced features.
As an owner-operator, my tools are essential to my work; they can be either a solid contributor or a cause of headaches. On a typical workday, my digital analyzer saves me work time, callbacks, and helps me keep my customers happy.
With the recent changes in the U.S. Environmental Protection Agency's (EPA's) 13-year-old refrigerant regulations, organizations must now really look at how they manage and account for refrigerants because EPA enforcement is now a black and white issue.
An HVAC technician must measure water temperatures, as well as dry bulb and wet bulb temperatures of air. For example, you may have to measure the entering and leaving temperatures for a coil - both for air and for water. Accurate readings can be critical.
RSS