Every year, The ACHR NEWS introduces the latest heating equipment that is available for the upcoming winter season. The intent is to help contractors prepare for this busy period by doing the research that will help them to distinguish between brands.
Like last year, this year’s Heating Showcase is split into two parts — residential and commercial. The residential/light commercial information is published in this issue, and the commercial equipment will be featured in the November 6 issue. Included in the coverage is feature-specific information about each individual product that was submitted by the manufacturers.
The showcase features the product grid, which includes technical facts, such as unit tonnage, refrigerant type, efficiency rating, and cooling capacity. The accompanying photo feature provides more in-depth information on the features of each individual unit and also includes technical support information from the manufacturer. The manufacturers provided all of the data included in the product grid, as well as in the photo feature. Therefore, any questions should be directed to them via the contact information provided in the photo feature section.
F E M E31 9 24 S 00 3
Serviceability features: The F Series 120 V has easy access to the control panel to save time when servicing the equipment.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The F Series air handler is designed to meet new energy efficiency standards in the industry with the new 120-V, five-speed, ECM air handler. This unit is designed to target mild climate applications where electric heat isn’t a requirement. The 120-V supply voltage helps installers save time and money where a traditional air conditioning system is being replaced with a heat pump and can help the system meet rebate or tax credit efficiency.
Warranty information: Available five-year standard limited warranty and 10-year extended warranty with registration.
Special installation requirements: The F Series 120-V supply voltage is a key feature to help installers save time and money in applications where a traditional air conditioning system is being replaced with a heat pump.
Contact: Advanced Distributor Products (ADP), 770-465-5679; www.adpnow.com
eProduct: 160
AEF E 3 A 0 0 S 1 H H1
Serviceability features: The eFurnace has electrical knockouts on both sides for easy access when servicing the equipment. In addition, the unit’s front door has only four screws for total access featuring a handle to make it easy to remove.
Noise-reduction features: The cabinet and panels are fully insulated to reduce sound levels.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The Moduleflex eFurnace is a gas furnace replacement modular blower designed to match industry standard furnace footprints at 30 inches tall, shorter than most gas furnaces. With either side or bottom return capability, it should be a drop-in replacement with no modification needed to the current system. It’s a high-efficiency, five-speed, ECM motor with no electric heat, which allows installation with existing electrical circuit in climate applications where electric heat isn’t a requirement.
Warranty information: Available five-year standard limited warranty and available 10-year extended warranty with registration.
Special installation requirements: The Moduleflex eFurnace has no electric heat and allows installation with existing electrical circuit. The unit is capable of being installed in vertical upflow or downflow and horizontal left or right, out-of-the-box. No kits or conversion needed. Saves the dealer time in all installation configurations.
Contact: Advanced Distributor Products (ADP), 770-465-5679; www.adpnow.com
eProduct: 161
Serviceability features: New 97% constant torque furnaces are built on AirEase’s proven platform of furnace. Serviceability features include forward-facing fasteners with a common size throughout. Key service items feature realignment guides to ensure parts go back to factory specifications, which eliminates the chance for flame impingement and premature failures. The control board can be moved out of the way of the blower assembly without disconnecting any wires, and pressure switches feature kink-resistant hoses to avoid nuisance trips.
Noise-reduction features: Quiet Combustion technology provides quieter startups and lower operating noise by having closer spacing between burners, larger carry-over channels, and a lower Btu input per burner. A972E models also feature a sealed combustion chamber and an insulated cabinet help to reduce operating sound.
IAQ equipment supported: The A972E is equipped with a removable floor base and offers pre-marked guides for cutting in a side return to support application flexibility for advanced filtration options.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The A972E provides dealers with a full line of constant torque furnaces that meet the qualifications for 25C tax credits and may qualify for other local incentives. Units are equipped with Even Heat Exchange (EHX) technology — a proprietary design for managing airflow through the furnace to create maximum contact with the heat exchanger surface for maximum heat transfer. This helps reduce heat strain and premature metal fatigue, which can shorten the life of a furnace.
Warranty information: The A972E comes with a standard five-year parts warranty and 20-year heat exchanger warranty and with registration, homeowners get up to 10 years on parts and a lifetime heat exchanger warranty. Unit replacement coverage is available from participating distributors.
Special installation requirements: The new product family is built on the same proven platform that is known and loved today. Upflow models are convertible ready for horizontal left or right installation with no modifications needed and offer flexibility for connecting utilities. Units ship with a field-installed external condensate drain trap, which can be mounted up to 5 feet away from the furnace.
Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com
eProduct: 162
Serviceability features: The new A972V Pro Series furnace offers serviceability features that include forward-facing fasteners with a common size throughout. Key service items feature realignment guides to ensure parts go back to factory specifications. The control board can be moved out of the way of the blower assembly without disconnecting any wires, and the furnace is communication-enabled and compatible with Comfort Sync A3 thermostats, which can help dealers with troubleshooting and diagnostics.
Noise-reduction features: Quiet Combustion technology provides quieter startups and lower operating noise by having closer spacing between burners, larger carry-over channels, and a lower Btu input per burner. Variable-speed blower operation helps lower sound throughout the home, while a sealed combustion chamber and cabinet insulation help reduce operating sound.
IAQ equipment supported: The A972V offers improved dehumidification in cooling operation and is equipped with a removable floor base. Pre-marked guides are provided for cutting in a side return to support application flexibility for advanced air filtration options. When paired with the Comfort Sync A3, the thermostat can support a wide range of third-party IAQ options, and Allergy Sync technology helps provide extra filtration when local allergen levels are high.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The A972V is the entry point to Pro Series equipment and meets the qualifications for 25C tax credits and may qualify for other local incentives. Units are equipped with Even Heat Exchange (EHX) technology — a proprietary design for managing airflow through the furnace to create maximum contact with the heat exchanger surface. All models are communicating-enabled and can support 24-V applications or be paired with the Comfort Sync A3 to deliver personalized home comfort.
Warranty information: Standard five-year parts warranty and 20-year heat exchanger warranty and with registration, homeowners get up to 10 years on parts and a lifetime heat exchanger warranty. Up to 10 years of unit replacement coverage is available from participating distributors.
Special installation requirements: The new product family is built on the same proven platform that is known and loved today. Upflow models are convertible ready for horizontal left or right installation with no modifications needed and offer flexibility for connecting utilities. Units ship with a field-installed external condensate drain trap, which can be mounted up to 5 feet away from the furnace. Applications with Comfort Sync A3 only require a four-wire connection for installation.
Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com
eProduct: 163
18 single-zone heat pump
Serviceability features: The DLCURA heat pump has standard heat and high heat options with an auto-restart function. All units include factory-installed base pan and crankcase heaters, low-voltage controls, and 24-V interface. It also offers traditional unitary line set sizes for easy installation.
Noise-reduction features: Variable-speed compressor and compact ECM fan motor operate at quieter, lower speeds most of the time (as low as 54 decibels). To reduce noise at maximum performance, units are equipped with isolation compressor grommets.
IAQ equipment supported: Compatible with most industry IAQ offerings.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The DLCURA heat pump achieves heating efficiencies up to 10 HSPF2 and cooling efficiencies up to 18 SEER2. Specific systems are Energy Star certified, based on unit pairing. These Airquest models have a broad temperature range allowing for customized comfort. Select units can provide heating during frigid temperatures as low as -22°F (-30°C) and cooling even when outdoor temperatures reach as high as 130°F (55°C).
Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Limited warranty period is five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details and restrictions.
Special installation requirements: The DLCURA utilizes traditional unitary line set sizes and requires the installation of a filter drier. It does not require the insulation of liquid or suction lines.
Contact: International Comfort Products, 463-245-4015; www.airquestcomfort.com
eProduct: 164
Serviceability features: Multi-poise configuration and at least 12 different venting options allow for ease of installation. Simple troubleshooting of gas valve. Quarter-turn knobs for easy door removal and secure attachment. Slide-out heat exchanger and blower assembly for easy access.
Noise-reduction features: Variable-speed, constant airflow, communicating ECM blower motor and variable-speed, induced draft, combustion blower reduce operating sound levels. The fully insulated steel cabinet absorbs sound from inside the furnace.
IAQ equipment supported: When coupled with a condensing unit and an Airquest Ion System Control, G97CMN Ion 98 furnaces can provide advanced dehumidification during cooling operation and control a humidifier accessory in heating mode. The furnace control board includes a 24-vac humidifier terminal and a 115-V electronic air cleaner terminal, which can be controlled through the Airquest Ion system.
Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring functions available only when used with the Airquest Ion System Control.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: G97CMN Ion 98 furnaces are built with stainless steel secondary heat exchangers. Fully modulating (40% to 100% capacity) gas valves allow furnaces to operate on a quieter low-heat setting until the thermostat calls for more heat. Designed for four-way multi-position installation with 12 different vent options at just 35 inches tall. Meets 40 ng/J low NOx emissions and <2% cabinet air leakage per ashrae standard 193.< p>
Warranty information: Ten-year No Hassle Replacement limited warranty. (If heat exchanger fails due to defect during applicable limited warranty time period, one-time replacement with comparable unit will be provided.) Lifetime heat exchanger/10-year parts limited warranty to original purchaser with timely registration. Limited warranty is 20-year heat exchanger/five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details/restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.airquestcomfort.com
eProduct: 165
2%>
Serviceability features: Capable of a braze-free installation, eliminating corrosive contaminants. Fully inverter-driven compressor without the hassle of a communicating thermostat. Intelligent defrost ensures defrost operation only operates when needed. Built-in crankcase heater for added compressor protection. Self-diagnostics: the system has built-in processing, which uses real-time diagnostics to prolong the unit’s life. The automatic diagnostics feature continuously scans for errors or malfunctions, and fault codes are shown on the unit display to facilitate troubleshooting and repair.
Noise-reduction features: Standard operation runs at a mere 52 decibels making this heat pump one of the quietest units on the market.
IAQ equipment supported: Most IAQ accessories are compatible.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The Ultra Side Discharge condensing units offer greater installation flexibility due to the reduced footprint. These units reach 20 SEER and operate at a mere 52 decibels, making it one of the quietest and most efficient heat pumps on the market. The heat pump delivers 100% heating capacities in temperatures down to 17°F and will deliver 78% of capacity down to -22°F, making this system a perfect solution even in cold climates.
Warranty information: This product comes with a 10-year parts and compressor warranty.
Special installation requirements: Standard installation practices apply, and the installation manual should be followed during all installs and retrofit applications. It is highly recommended that a surge protector be installed with each unit.
Contact: Airtemp, 410-553-3731; www.airtemp.com
eProduct: 166
High-efficiency, modulating, variable-speed.
Serviceability features: Award-winning integrated ComfortBridge communicating technology simplifies commissioning and diagnostics via on board Bluetooth, using the CoolCloud phone/tablet application. Easy-to-install top venting with optional side venting; convenient left/right connection for gas/electrical service; airtight solid bottom or side return, with easy-cut tabs for effortless removal in bottom air-inlet applications. For quick troubleshooting, the self-diagnostic control board continuously monitors system, with constant memory fault-code history output to a dual seven-segment display. Durable silicon nitride igniter.
Noise-reduction features: The AMVM97 operates on low capacity as often and as long as possible, producing as low as 25% of the normal high-fire and circulating blower sound generated by furnaces with multi-speed motors. Quiet air circulation is provided by an efficient, quiet, variable-speed circulator motor and an induced-draft blower that gently ramps up or down according to heating demand. The fully-insulated cabinet means less than 2% air leakage, maximizing transfer efficiency and lowering blower noise.
IAQ equipment supported: Color-coded, low-voltage terminals offer provisions for an electronic air cleaner. The Amana brand gas furnace is compatible with the Clean Comfort Indoor Air Essentials line of filtration, humidification, dehumidification, purification, ventilation, and zoning products, as well as other IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: With its unique, robust design formed using wrinkle-bend technology, Amana brand's stainless steel, tubular, primary heat exchanger provides rugged durability. It's paired with a stainless steel secondary heat exchanger for reliable, long-lasting efficiency. A variable-speed circulator motor provides quiet system startup and shutdown with highly efficient performance. Keeping air moving throughout the home, it helps maintain indoor comfort while providing added filtration. Integrated ComfortBridge communicating technology provides easy commissioning and diagnostics.
Warranty information: Lifetime heat exchanger limited warranty, lifetime unit replacement limited warranty, and 10-year parts limited warranty. Online registration must be completed within 60 days of installation. Online registration and some additional requirements are not required in California or Québec. The duration of warranty coverages in Texas and Florida differs in some cases. For complete warranty details, visit amana-hac-com.
Special installation requirements: Self-calibrating modulating gas valve auto-configures for each installation. Designed for multiposition installation. Certified for direct vent (two-pipe) or non-direct vent (one-pipe) installations. Complies with the California 40 ng/J low NOx emissions standard. Auto-comfort and enhanced dehumidification modes are available.
Contact: Amana Heating & Air Conditioning, 713-861-2500; amana-hac.com
eProduct: 167
With ducted gas furnace, heat pump, or dual fuel.
Serviceability features: With its slim, compact design, the new S-Series is easy to transport and install and packed with contractor-friendly features. Proprietary Inside Intelligence for diagnostics, proprietary control algorithmic logic, diagnostic indicator lights, seven-segment LED display, and fault-code storage. Coil/ambient temperature sensors and suction pressure transducer. Sweat connection service valves with easy-access gauge ports. Top/side maintenance access. Hydrophilic Blue Fin corrosion coating helps keep the 1,000-hour salt spray-rated coil clean. Advanced water-shedding drain pan.
Noise-reduction features: Features sound levels as low as 56 dBA, a quiet-mode for enhanced acoustical comfort, and swing compressor technology, The S-series systems will bring homeowners peace and quiet both inside and outdoors. Quiet, dependable proprietary swing compressor technology provides smooth rotation with little friction for high-operation efficiency, low vibrations, and low noise. A digitally commutated, variable-speed motor runs quietly. It's all topped off with a high-density compressor sound blanket to reduce noise further.
IAQ equipment supported: Compatible with IAQ equipment including the Clean Comfort branded Indoor Air Essentials line of filtration, humidification, dehumidification, purification, ventilation, and zoning IAQ products. Learn more at www.cleancomfort.com.
Thermostat compatibility: Requires a special thermostat. Compatible with the new Amana brand Smart Thermostat System.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The S-series easily connect to traditional ducted equipment. A premium mid-efficiency solution at an affordable price, its slim, small footprint adds design and installation flexibility to meet most project demands. It installs on pad or wall mount and is perfect for zero-lot-line and small patio/backyard spaces. Intelligent defrost mode. A 7-mm coil provides outstanding heat transfer. Three humidification levels allow customization based on geography and humidity. Hot-start technology eliminates cold drafts. Energy Star cold climate certified.
Warranty information: Lifetime unit replacement limited warranty and a 10-year parts limited warranty. To receive the limited warranties, online registration must be completed within 60 days of installation. Online registration and some additional requirements are not required in California or Québec. Complete warranty details available from local dealer/contractor or at amana-hac.com. The duration of warranty coverages in Texas and Florida differs in some cases.
Special installation requirements: The S-Series side-discharge systems are ideal for most single-, two-, and three-story homes with existing ductwork. They utilize existing line sets and can connect up to 100 feet of pipe (for typical installations). Slim profiles provide installation solutions when traditional cube-style options cannot. In communicating mode, only two low-voltage wires to outdoor unit required. Field-selectable boost mode. Field-installed bi-flow filter drier. Amana’s Smart Thermostat works with new Amana Home app for end user control using smart devices.
Contact: Amana brand Heating & Air Conditioning, 713-861-2500; amana-hac.com
eProduct: 168
Serviceability features: The Platinum 18 heat pump features American Standard Link, innovative technology to simplify the installation, commissioning, and remote monitoring of variable-speed HVAC systems. It assists technicians with installation accuracy through automated configuration, charging, and system testing, and it works with remote monitoring to provide quicker solutions and more efficient service calls. Link provides the exact data technicians need for installation and troubleshooting on their own smart devices.
Noise-reduction features: The lower compressor modulation and fan speeds yield amazingly low sound levels – 54 to 76 dbA.
IAQ equipment supported: Works in conjunction with American Standard AccuClean Whole Home Air Cleaner to remove 99.89% of airborne pollutants — including dust mites, smoke, pet dander, and viruses.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The new Platinum 18 variable-speed heat pump is part the new American Standard Link communicating equipment lineup that will be available across the nation in fall 2022. These models work with all existing AccuLink variable-speed indoor equipment and controls, as well as the future American Standard Link air handlers and smart thermostat.
Warranty information: Limited warranty registered: 12-year compressor and 10-year coil and functional parts. Non-registered: five-year compressor and five-year coil and functional Parts
Special installation requirements: Manufacturer did not specify.
Contact: American Standard Heating and Air Conditioning, 877-717-4214; americanstandardair.com
eProduct: 169
Serviceability features: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: In cold weather, low ambient operation enables the system to warm indoors even when it’s as low as -22°F outside. Five different 19 SEER2 outdoor units pair seamlessly with compatible high-wall indoor units. Outdoor units operate as quietly as 54 dBA. These ductless systems feature intuitive remote or wired controllers to manage fan speeds and swing louvers, as well as easy-to-maintain washable, polymeric air filters.
Warranty information: Five-year limited functional parts warranty and 10-year functional parts warranty with registration.
Special installation requirements: Manufacturer did not specify.
Contact: Ameristar, 877-374-1824; https://ameristarhvac.com
eProduct: 170
With SmartSense technology.
Serviceability features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the HVH8 heat pump offers more precise system control with remote access, text-based diagnostics, and contractor information displayed. Smaller, lighter design than most two-stage units. Easy-access service valves.
Noise-reduction features: Sound-reducing features include an aerodynamic variable-speed fan, a soft-mounted compressor, a high-performance acoustic-absorbing compressor blanket, and Quiet Shift defrost. The variable-speed compressor and compact ECM fan motor operate at quieter, lower speeds most of the time (as low as 56 decibels). Soft start and smooth ramp-up to operating speeds.
IAQ equipment supported: Compatible with most industry IAQ offerings.
Thermostat compatibility: Compatible with most thermostats. Five-stage operation, communicating, and self-configuring functions only available when used with the Arcoaire Ion System Control.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the Arcoaire HVH8 Ion 18 heat pump provides five-stage variable-speed technology in a compact design. It is Energy Star qualified with efficiencies up to 9 HSPF2/8.5 SEER2/12 EER2.
Warranty information: Ten-year No Hassle Replacement limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Limited warranty is five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details/restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 462-245-4015; www.arcoaire.com
eProduct: 171
Serviceability features: On-board Near Field Communication (NFC) antenna streamlines furnace setup when using the Service Technician app. Designed for four-way multi-position installation with 12 different vent options, the N96VSN furnaces include slide-out heat exchanger and blower assembly for ease of service. High temperature limit control designed to prevent overheating.
Noise-reduction features: The N96VSN furnace includes a variable-speed, constant airflow, ECM blower motor to reduce operating sound levels. The steel cabinet is fully insulated to keep sound levels to a minimum.
IAQ equipment supported: Not applicable.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Achieving efficiencies up to 97% AFUE, the N96VSN furnace is Energy Star-certified. Built with an RPJ primary heat exchanger and stainless steel secondary heat exchanger. Equipped with a variable-speed, constant torque, ECM blower for efficient temperature control and optimal comfort. Meets 40 ng/J low NOx emissions and <2% cabinet air leakage per ashrae standard 193. supports single- and two-stage cooling units. includes a dehumidification feature while in mode.< p>
Warranty information: Twenty-year heat exchanger warranty and a five-year warranty for all other parts. All warranty periods begin on the date of original installation. Reference warranty card for more information and terms.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.arcoaire.com
eProduct: 172
2%>
Serviceability features: New 97% constant torque furnaces are built on Armstrong Air’s proven furnace platform. Serviceability features include forward-facing fasteners with a common size throughout. Key service items feature realignment guides to ensure parts go back to factory specifications, which eliminates the chance for flame impingement and premature failures. The control board can be moved out of the way of the blower assembly without disconnecting any wires, and pressure switches feature kink-resistant hoses to avoid nuisance trips.
Noise-reduction features: Quiet Combustion technology provides quieter startups and lower operating noise by having closer spacing between burners, larger carry-over channels and a lower Btu input per burner. A972E models also feature a sealed combustion chamber and an insulated cabinet help to reduce operating sound.
IAQ equipment supported: The A972E is equipped with a removable floor base and offers pre-marked guides for cutting in a side return to support application flexibility for advanced filtration options.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The A972E provides dealers with a full line of constant torque furnaces that meet the qualifications for 25C tax credits and may qualify for other local incentives. Units are equipped with Even Heat Exchange (EHX) technology — a proprietary design that manages airflow through the furnace for maximum contact with the heat exchanger surface. This helps create maximum heat transfer and reduces heat strain and premature metal fatigue that can shorten the life of a furnace.
Warranty information: The A972E comes with a standard five-year parts warranty and 20-year heat exchanger warranty. With registration, homeowners get up to 10 years on parts and a lifetime heat exchanger warranty. Unit replacement coverage is available from participating distributors.
Special installation requirements: The new product family is built on the same proven platform that is known and loved today. Upflow models are convertible ready for horizontal left or right installation with no modifications needed and offer flexibility for connecting utilities. Units ship with a field-installed external condensate drain trap, which can be mounted up to 5 feet away from the furnace.
Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com
eProduct: 173
Serviceability features: The new A972V furnace offers serviceability features that include forward-facing fasteners with a common size throughout. Key service items feature realignment guides to ensure parts go back to factory specifications. The control board can be moved out of the way of the blower assembly without disconnecting any wires, and the furnace is communicated-enabled and compatible with Comfort Sync A3 thermostats that can help dealers with troubleshooting and diagnostics.
Noise-reduction features: Quiet Combustion technology provides quieter startups and lower operating noise by having closer spacing between burners, larger carry-over channels, and a lower Btu input per burner. Variable-speed blower operation helps lower sound throughout the home, while a sealed combustion chamber and cabinet insulation helps reduce operating sound.
IAQ equipment supported: The A972V offers improved dehumidification in cooling operation and is equipped with a removable floor base and offers pre-marked guides for cutting in a side return to support application flexibility for advanced air filtration options. When paired with the Comfort Sync A3, the thermostat can support a wide range of third-party IAQ options, and Allergy Sync technology helps provide extra filtration when local allergen levels are high.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The A972V is the entry point to Pro Series equipment and meets the qualifications for 25C tax credits and may qualify for other local incentives. Units are equipped with Even Heat Exchange (EHX) technology — a proprietary design for managing airflow through the furnace to create maximum contact with the heat exchanger surface. All models are communicating-enabled and can support 24-V applications or be paired with the Comfort Sync A3 to deliver personalized home comfort.
Warranty information: The A972V comes with a standard five-year parts warranty and 20-year heat exchanger warranty. With registration, homeowners get up to 10 years on parts and a lifetime heat exchanger warranty. Up to 10 years of unit replacement coverage is available from participating distributors.
Special installation requirements: The new product family is built on the same proven platform that is known and loved today. Upflow models are convertible ready for horizontal left or right installation with no modifications needed and offer flexibility for connecting utilities. Units ship with a field-installed external condensate drain trap, which can be mounted up to 5 feet away from the furnace. Applications with Comfort Sync A3 only require a four-wire connection for installation.
Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com
eProduct: 174
Serviceability features: Shipped upflow or horizontal right; field convertible for downflow or horizontal left; AHRI certified with major HVAC brands; ETL listed for refrigerant use when proper metering device is used; cabinet leakage less than 2% (ASHRAE standard 193); pre-programmed constant torque ECM with factory-embedded software; electronic control board; and rail-mounted blowers for easy removal. A factory-provided knockout for duct return is standard on all LGM Series models, and all feature an easy-access door for coil cleaning.
Noise-reduction features: Fully insulated galvanized cabinet
IAQ equipment supported: Compatible with a wide variety of IAQ products including UV light, UV purification, filtration, humidification, dehumidification, and ventilation.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The LGM Series models feature a high-efficiency 120-V ECM motor with factory-programmed software to control motor speeds and torques. Aspen’s proprietary software encoding allows the ECM motors to provide optimal performance and reliability. An electronic control board includes a blower time delay, which helps to maximize heat/cool extraction and offers an integrated fuse for additional protection. The LGM series is designed for the installation of a gas furnace to heat pump installation.
Warranty information: Ten-year parts limited warranty with registration.
Special installation requirements: Manufacturer did not specify.
Contact: Aspen Manufacturing, 281-831-2950; www.aspenmfg.com
eProduct: 175
Serviceability features: For easier serviceability, the 24 live checkpoint values that are displayed on the control board of the IDS Light allow the contractor to see live system performance data. For troubleshooting purposes, the control board also displays 20 possible fault codes, which helps the contractor to diagnose the cause of a technical issue.
Noise-reduction features: The IDS Light has a quiet performance, with outdoor sound levels as low as 59 dBA.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The BOVA15 outdoor system combines standard efficiency with Bosch’s BVA15 fixed-speed air handler. All the benefits of the Bosch inverter system are available at a great price point with IDS Light. A fully modulating inverter drive precisely matches the heating/cooling load. Quiet performance, with outdoor sound levels as low as 59 dBA. Fast response and consistent room temperature.
Warranty information: The residential limited warranty provides replacement parts protection for up to 10 years. This standard offering covers all components incorporated into the heat pump system at the time of manufacture. All other components or parts that are purchased from Bosch and installed in the field have a one-year parts warranty.
Special installation requirements: Installing the IDS Light is easy and features the same installation steps as other products in the IDS Family. Furthermore, no complicated or expensive proprietary controls are required for the IDS Light — or any Bosch inverter system. This makes installation easy and efficient. The IDS Light also shares some spare parts with other IDS Family products for better stockability.
Contact: Bosch Home Comfort, 800-283-3787; www.bosch-homecomfort.com/us/en/residential/home
eProduct: 176
Serviceability features: There is a built-in boiler circulator pump and is field convertible from natural gas to LP with included conversion kit. This solution is also capable of outdoor reset with accessory temperature sensor, which is not included.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: This product is the singular solution for efficient, dependable home heating with up to 7.7 gallons per minute of domestic hot water production. Depending on inlet water temperature, the 5200 can run three showers plus a dishwasher. Its stainless steel heat exchanger system offers excellent performance at a cost-effective price, and it features an exhaust gas outlet sensor and a standard inlet filter screen to keep out debris and provide extra protection for the boiler.
Warranty information: Ten- year heat exchanger, five-year parts, and one-year labor limited warranty. The standard offering covers the components incorporated into the Singular boiler at the time of manufacture.
Special installation requirements: Singular is a wall-mounted combi boiler that can be used in many hydronic heating applications. This model has a small footprint and is under 80 lbs., making installation a breeze. Additionally, it is highly efficient, with a 95% AFUE rating, making this system eligible for up to 75% savings in local and/or federal energy rebate programs.
Contact: Bosch Home Comfort, 800-283-3787; www.bosch-homecomfort.com/us/en/residential/home
eProduct: 177
Serviceability features: Unit has horizontal or vertical direct venting and vents with CPVC or polypropylene; can use natural gas or propane; and has leak detection. A boiler pump is wired and mounted on the inside jack. Built-in condensate trap and drain (priming not required).
Noise-reduction features: On-board three-speed pump to fine tune flow velocity.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Unique shell-in-tube heat exchanger design. Comes with a stainless steel fire-tube heat exchanger and multiple venting options. Modulating gas valves allow up to 10:1 turndown and ensure top performance (80,000 to 199,000 Btu) and efficiency (95%+ AFUE). Brute FT boilers have a low-pressure drop design with a sealed combustion chamber and pre-mix ceramic fiber burner. The low NOx system exceeds the most stringent regulations for air quality at 17ppm NOx.
Warranty information: Standard warranty: 10-year heat exchanger and five-year parts
Special installation requirements: Refer to the I/O manual for all installation requirements. Additional resources regarding installation can be found on the website. If further assistance is needed, please get in contact with the product team at products@bradfordwhite.com.
Contact: Bradford White; www.bradfordwhite.com
eProduct: 178
Serviceability features: Enhanced diagnostics with Evolution control
Noise-reduction features: The AeroQuiet System II design includes a pressure equalizer valve, compressor sound blanket, quiet mount split post compressor grommets, and forward-swept fan blade for 55 dB during lowest capacity cooling operating condition. Unit has a soft start and smooth ramp up.
IAQ equipment supported: Perfect Humidity technology offers excellent humidity control and is capable of removing up to 400% more moisture than standard systems.
Thermostat compatibility: Compatible with most thermostats (operates as a two-stage with non-communicating thermostats)
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Small but powerful, this unique heat pump uses inverter technology and a rotary compressor to deliver variable-speed control. That translates to highly efficient heating and cooling operation optimized to current conditions down to 25% capacity for ultra-quiet, even-temperature comfort. What's more, it can provide exceptional summer dehumidification.
Warranty information: To the original owner, when product is used in a residence, a 10-year parts limited warranty upon timely registration of new equipment. Warranty period is five years if not registered within 90 days. Jurisdictions where warranty benefits cannot be conditioned on registration will automatically receive a 10-year parts limited warranty. See warranty certificate for complete details.
Special installation requirements: Manufacturer did not specify.
Contact: Bryant, 463-245-4015; www.bryant.com/en/us
eProduct: 179
Serviceability features: Standard size line sets to simply system replacements. Built-in 24-V interface, eliminating the need for additional accessories for third-party thermostat connections
Noise-reduction features: Ultra-quiet operation reduces noise pollution both indoors and out for more peaceful, comfortable spaces. The 38MURA has sound performance as low as 54dBA.
IAQ equipment supported: Offers excellent humidity control. Can operate at lower speeds for longer times extracting more humidity from the indoor air.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The 38MURA is driven by efficient reliable comfort and a serious commitment to quality. The smooth-running compressor represents the quiet, reliable performance expected. A galvanized steel cabinet shields these units from hail, errant soccer balls, lawn equipment, and more. All this in a compact cabinet that can be installed almost anywhere and even stacked. The horizontal design of the coils allows for more efficient heat transfer, which can lead to lower energy bills.
Warranty information: To the original owner, when product is used in a residence, a 10-year parts limited warranty upon timely registration of new equipment. Warranty period is five years if not registered within 90 days. Jurisdictions where warranty benefits cannot be conditioned on registration will automatically receive a 10-year parts limited warranty. See warranty certificate for complete details.
Special installation requirements: A low-profile, unobtrusive outdoor unit makes this system an ideal option for homes with zero lot lines or limited outdoor space. This versatile, energy-efficient system can be easily retrofitted to combine with existing connections, providing an efficiency upgrade for the entire home. It comes with traditional unitary line set sizes, factory-installed base pan heating, and a factory-installed crankcase heater.
Contact: Bryant, 463-245-4015; www.bryant.com/en/us
eProduct: 180
Serviceability features: The Infinity line offers built-in Bluetooth connectivity for enhanced serviceability and software updates at the outdoor unit. That means the dealer can troubleshoot, service, and even “push” software/firmware updates to the outdoor unit with fewer, if any, trips into the home. And, in some cases, there is no need for someone to be home.
Noise-reduction features: All models include Silencer System II components that reduce airflow and vibration. The Infinity 24 achieves sound levels as low as 55 dBA, which puts these heat pumps among the quietest in the variable-speed outdoor category.
IAQ equipment supported: This heat pump can be the key to up to 400% more humidity removal from the air in the home. With an Infinity system control and an Infinity multi-speed indoor unit, Ideal Humidity System technology can deliver ideal comfort all year long.
Thermostat compatibility: Compatible with most thermostats (operates as a two-stage with non-communicating thermostats).
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The Infinity 18VS heat pump offers variable-speed compression that can step down in five stages to as low as 25% of its capacity. The ability to run in lower speeds most of the time makes it quieter and more adept at removing humidity in the summer. It's also significantly better than a two-stage unit at keeping temperatures even.
Warranty information: To the original owner, heat pumps are covered by a 10-year parts limited warranty upon timely registration. In addition, model 25VNA4 is covered by a 10-year unit limited replacement warranty on compressor failures only. The limited warranty periods are five years if not registered within 90 days of installation except in jurisdictions where warranty benefits cannot be conditioned upon registration. See warranty certificate at carrier.com for complete details and restrictions.
Special installation requirements: Manufacturer did not specify.
Contact: Carrier, 463-245-4015; www.carrier.com/residential/en/us
eProduct: 181
Serviceability features: Standard size line sets to simply system replacements. Built-in 24-V interface, eliminating the need for additional accessories for third-party thermostat connections.
Noise-reduction features: Ultra-quiet operation reduces noise pollution both indoors and out for more peaceful, comfortable spaces. The 38MURA has sound performance as low as 54dBA.
IAQ equipment supported: Offers excellent humidity control. Can operate at lower speeds for longer times extracting more humidity from the indoor air.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The 38MURA is driven by efficient, reliable comfort and a serious commitment to quality. The smooth-running compressor represents the quiet, reliable performance expected. A galvanized steel cabinet shields these units from hail, errant soccer balls, lawn equipment, and more. All this in a compact cabinet that can be installed almost anywhere and even stacked. The horizontal design of the coils allows for more efficient heat transfer, which can lead to lower energy bills.
Warranty information: To the original owner, horizontal heat pumps are covered by a 10-year parts limited warranty upon timely registration. The limited warranty period is five years if not registered within 90 days of installation except in jurisdictions where warranty benefits cannot be conditioned upon registration. See warranty certificate at carrier.com for complete details and restrictions.
Special installation requirements: A low-profile, unobtrusive outdoor unit makes this system an ideal option for homes with zero lot lines or limited outdoor space. This versatile, energy-efficient system can be easily retrofitted to combine with existing connections, providing an efficiency upgrade for the entire home. It comes with traditional unitary line set sizes, factory-installed base pan heating, and a factory-installed crankcase heater.
Contact: Carrier, 463-245-4015; www.carrier.com/residential/en/us
eProduct: 182
Serviceability features: The THF2 heat pump features a compact footprint, swing-out control box, field-installed TXVs, removable fan guard, and individually removable coil guards for easy and fast servicing.
Noise-reduction features: A thoughtful cabinet design isolates operating sounds, while upward airflow carries sound away to achieve a sound performance as low as 66 dBA.
IAQ equipment supported: THF2 heat pumps can be matched with one-piece or modular air handlers, as well as humidifiers and dehumidifiers to enhance indoor air quality and optimize comfort. Air filters and ultraviolet air purifiers can further reduce airborne allergens, bacteria, and viruses.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Champion THF2 heat pumps are engineered for year-round comfort and energy efficiency. Units are designed to be matched with Champion indoor coils, furnaces, and air handlers to create a complete solution, including dual fuel heating. THF2 units are backed by the Good Housekeeping Seal, meet Energy Star/CEE Tier 1 efficiency requirements, and are optimized for tax credit eligibility up to $2,000 per year through the Inflation Reduction Act (U.S.).
Warranty information: With registration, THF2 heat pumps come with a 10-year compressor limited warranty.
Special installation requirements: A simplified installation process can be completed using conventional equipment and devices.
Contact: Johnson Controls, 414-344-8594; www.johnsoncontrols.com
eProduct: 183
Serviceability features: The Z9ES gas furnace features built-in, high-level self-diagnostics with fault code displays to streamline troubleshooting. Quarter-turn knobs simplify door removal while front-facing screws on the flame sensor and igniter provide easy access. Safety is enhanced with a 100% shut-off main gas valve and blower door safety switch.
Noise-reduction features: The Z9ES features a fully insulated cabinet that enhances thermal and acoustic performance. A dynamically balanced blower and motor assembly minimize sound. Variable-speed inducers and blowers maximize performance while minimizing sound. Variable-speed ECM fan motors provide quiet, efficient circulation.
IAQ equipment supported: External air filters provide maximum flexibility in meeting customers' IAQ needs. Optional system-matched humidifiers, dehumidifiers, germ-killing UV-C lighting, and high-efficiency filtration through MERV 16 are available to provide a superior level of IAQ.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: At 96% AFUE, the Champion Z9ES have been designed for ease of installation and service, while providing efficient, high-performance heating with a compact footprint and flexible configuration. A high-efficiency blower motor reduces electrical usage, and an electronic hot surface ignition saves fuel costs, while increasing reliability. A sturdy aluminized-steel heat exchanger further enhances long-lasting performance.
Warranty information: Lifetime limited heat exchanger and 10-year parts limited warranties are available. A 10-year Complete Assurance limited warranty pledge states that if the heat exchanger fails within 10 years of installation, an optional furnace replacement is provided in lieu of heat exchanger replacement. To take advantage of this offer, customers must register online within 90 days.
Special installation requirements: This multi-positional unit can be installed in all positions with minimal conversion necessary. Simply rotate the inducer to the desired venting position, whether out the top, side, or bottom (internal downflow kit is available). Two identical units can be twinned by connecting a coupling wire. Installation is streamlined thanks to a compact 33-inch cabinet height, fold-up duct connector flanges, and easy access to controls. Electrical knockouts have been eliminated to further simplify the installation process.
Contact: Johnson Controls, 414-344-8594; www.johnsoncontrols.com
eProduct: 184
Serviceability features: Chiltrix air-to-water heat pumps use the proven monoblock design, meaning that all refrigerant and associated components such as compressor, evaporator, condenser, etc., are all self-contained and sealed in the outdoor unit. No refrigeration license, vacuum pump, gauges, etc., are needed for installation. Can be use ducted, ductless, or radiant and can use all of these in the same application. Chiltrix engineers are available to assist with designs and specific questions.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Compatible with most major after-market IAQ equipment.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Chiltrix air-to-water heat pumps use the proven monoblock design, meaning no refrigerant is ever inside the building envelope for improved safety. The outdoor unit connects to indoor equipment via insulated water lines (water or water/glycol).
Warranty information: Five-year compressor and two-year other components.
Special installation requirements: Installers who understand boiler powered radiant systems will be able to design and install Chiltrix air-to-water heat pump systems, but there are a few differences and some new things they will need to know. Chiltrix engineers are available to assist with design, installation, and commissioning.
Contact: Unico Inc., 800-527-0896; https://unicosystem.com
eProduct: 185
Serviceability features: The THF2 heat pump features a compact footprint, swing-out control box, field-installed TXVs, removable fan guard, and individually removable coil guards for easy and fast servicing.
Noise-reduction features: A thoughtful cabinet design isolates operating sounds, while upward airflow carries sound away to achieve a sound performance as low as 66 dBA.
IAQ equipment supported: THF2 heat pumps can be matched with one-piece or modular air handlers, as well as humidifiers and dehumidifiers to enhance indoor air quality and optimize comfort. Air filters and ultraviolet air purifiers can further reduce airborne allergens, bacteria, and viruses.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Coleman THF2 heat pumps are engineered for year-round comfort and energy efficiency. Units are designed to be matched with Coleman indoor coils, furnaces, and air handlers to create a complete solution, including dual fuel heating. THF2 units are backed by the Good Housekeeping Seal, meet Energy Star/CEE Tier 1 efficiency requirements, and are optimized for tax credit eligibility up to $2,000 per year through the Inflation Reduction Act (U.S.).
Warranty information: With registration, THF2 heat pumps come with a 10-year compressor limited warranty.
Special installation requirements: A simplified installation process can be completed using conventional equipment and devices.
Contact: Johnson Controls, 414-344-8594; www.johnsoncontrols.com
eProduct: 186
Serviceability features: The Z9ES gas furnace features built-in, high-level self-diagnostics with fault code displays to streamline troubleshooting. Quarter-turn knobs simplify door removal while front-facing screws on the flame sensor and igniter provide easy access. Safety is enhanced with a 100% shut-off main gas valve and blower door safety switch.
Noise-reduction features: The Z9ES features a fully insulated cabinet that enhances thermal and acoustic performance. A dynamically balanced blower and motor assembly minimize sound. Variable-speed inducers and blowers maximize performance while minimizing sound. Variable-speed ECM fan motors provide quiet, efficient circulation.
IAQ equipment supported: The Z9ES uses external air filters to provide maximum flexibility in meeting customers' IAQ needs. Optional system-matched humidifiers, dehumidifiers, germ-killing UVC lighting, and high-efficiency filtration through MERV 16 are available to provide a superior level of IAQ.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: At 96% AFUE, the Coleman Z9ES has been designed for ease of installation and service while providing efficient, high-performance heating with a compact footprint and flexible configuration. A high-efficiency blower motor reduces electrical usage, and an electronic hot surface ignition saves fuel costs, while increasing reliability. A sturdy aluminized-steel heat exchanger further enhances long-lasting performance.
Warranty information: Lifetime limited heat exchanger and 10-year parts limited warranties are available. A 10-year Complete Assurance limited warranty pledge states that if the heat exchanger fails within 10 years of installation, an optional furnace replacement is provided in lieu of heat exchanger replacement. To take advantage of this offer, customers must register online within 90 days.
Special installation requirements: This multi-positional unit can be installed in all positions with minimal conversion necessary. Simply rotate the inducer to the desired venting position, whether out the top, side, or bottom (internal downflow kit is available). Two identical units can be twinned by connecting a coupling wire. Installation is streamlined thanks to a compact 33-inch cabinet height, fold-up duct connector flanges, and easy access to controls. Electrical knockouts have been eliminated to further simplify the installation process.
Contact: Johnson Controls, 414-344-8594; www.johnsoncontrols.com
eProduct: 187
Serviceability features: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Does not share replacement parts with other models.
Additional features: Aluminum-alloy traditional fin-and-tube coil construction for maximum durability and corrosion resistance. Efficient and quiet ECM blower motor. Accepts traditional 24-vac thermostats for convenience and advanced control options. Wired programmable control included. Optional electric resistance heat kits (up to 25 kW) provide auxiliary heat source for comfort during the worst conditions.
Warranty information: Manufacturer did not specify.
Special installation requirements: Manufacturer did not specify.
Contact: MARS/Heat Controller, 517-787-2100; marsdelivers.com
eProduct: 188
Serviceability features: Multi-poise configuration and at least 12 different venting options allow for ease of installation. Simple troubleshooting of gas valve. Quarter-turn knobs for easy door removal and secure attachment. Slide-out heat exchanger and blower assembly for easy access.
Noise-reduction features: Variable-speed, constant airflow, communicating, ECM blower motor and variable-speed, induced draft, combustion blower reduce operating sound levels. The fully insulated steel cabinet absorbs sound from inside the furnace.
IAQ equipment supported: When coupled with a condensing unit and a Comfortmaker Ion System Control, Comfortmaker G97CMN Ion 98 furnaces can provide advanced dehumidification during cooling operation and can control a humidifier accessory in heating mode. The furnace control board includes a 24-vac humidifier terminal and a 115-V electronic air cleaner terminal, which can be controlled through the Comfortmaker Ion system.
Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring functions available only when used with the Comfortmaker Ion System Control.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Comfortmaker G97CMN Ion 98 furnaces are built with stainless steel secondary heat exchangers. Fully modulating (40% to 100% capacity) gas valves allow furnaces to operate on a quieter low-heat setting until the thermostat calls for more heat. Designed for four-way multi-position installation with 12 different vent options at just 35 inches tall. Meets 40 ng/J low NOx emissions and <2% cabinet air leakage per ashrae standard 193.< p>
Warranty information: Ten-year No Hassle Replacement limited warranty. (If heat exchanger fails due to defect during applicable limited warranty time period, one-time replacement with comparable unit will be provided.) Lifetime heat exchanger/10-year parts limited warranty to original purchaser with timely registration. Limited warranty is 20-year heat exchanger/five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details/restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.comfortmaker.com
eProduct: 189
2%>
Serviceability features: The innovative unit base design of this packaged heat pump is compact and installs easily on the rooftop or ground level. It includes a sloped pan for improved drainage and outside metal rails for easy handling, rigging, and installation. PHD4 units can be quickly configured for either downflow or horizontal applications utilizing standard duct covers.
Noise-reduction features: Includes a scroll compressor, which operates most of the time in the quieter, lower stage. Each compressor has vibration isolation to provide quieter (as low as 69.9 decibels) operation. Outdoor fan is sized and designed for minimal noise.
IAQ equipment supported: Enhanced dehumidification is available on high stage cooling with use of a dehumidistat. Accessory filter racks support 2-inch filters.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The high-efficiency design of the Comfortmaker PHD4 meets 2023 efficiency requirements. It achieves up to 6.7 HSPF2/13.4 SEER2/11.05 EER2 with a quiet scroll compressor. The PDH4 features a multi-speed ECM motor for efficient airflow and improved dehumidification. The aluminum indoor coils are computer-designed for optimal heat transfer and efficiency. The outdoor coil is internally mounted on the top of the unit for easy access and installation.
Warranty information: Three-year No Hassle Replacement limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, a one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Limited warranty is five-year parts if not registered within 90 days of installation. Registration not required where warranty benefits cannot be conditioned on registration. See warranty certificate for details and restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.comfortmaker.com
eProduct: 190
Serviceability features: New 97% constant torque furnaces are built on the same platform dealers use today and offer simplified service by using consistent parts with existing models, helping to ensure they have the right parts during a service call. Thumb screw door access, forward-facing fasteners, realignment guides for key components, and a full slide-out blower make service and routine maintenance easy.
Noise-reduction features: An isolated burner section and an insulated cabinet help to reduce operating sound, while each burner runs at a lower Btu input per burner to help reduce sound while running.
IAQ equipment supported: The 97G2E is equipped with a removable floor base and offers pre-marked guides for cutting in a side return to support application flexibility for advanced filtration options.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The 97G2E provides dealers with a full line of constant torque furnaces that meet the qualifications for 25C tax credits and may qualify for other local incentives. Designed with installation in mind, all models offer dealers convertible-ready upflow to horizontal left- or right-side installation with no modifications needed. Pre-bent and pre-drill duct flanges help by making coil and duct connections ready out of the box and help make sealing the connection easier.
Warranty information: Standard five-year parts warranty and 20-year heat exchanger warranty and with registration, homeowners get up to 10 years on parts and a lifetime heat exchanger warranty.
Special installation requirements: Units ship with a field-installed external condensate drain trap, which can be mounted up to 5 feet away from the furnace.
Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com
eProduct: 191
Serviceability features: New 97% constant torque furnaces are built on the same platform dealers use today and offer simplified service by using consistent parts with existing models, helping to ensure they have the right parts during a service call. Thumb screw door access, forward-facing fasteners, realignment guides for key components, and a full slide-out blower make service and routine maintenance easy.
Noise-reduction features: A variable-speed indoor blower motor helps reduce operating noise at lower speeds. An isolated burner section and an insulated cabinet help to reduce operating sound, while each burner runs at a lower Btu input per burner to help reduce sound while running.
IAQ equipment supported: The 97G2V helps to provide enhanced dehumidification in cooling operation and supports other third-party IAQ accessories. It is equipped with a removable floor base and offers pre-marked guides for cutting in a side return to support application flexibility for advanced filtration options.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The 97G2V provides dealers with a full line of variable-speed furnaces that meet the qualifications for 25C tax credits and may qualify for other local incentives. Designed with installation in mind, all models offer dealers convertible-ready upflow to horizontal left- or right-side installation with no modifications needed. Pre-bent and pre-drill duct flanges help by making coil and duct connections ready out of the box and help make sealing the connection easier.
Warranty information: The 97G2V comes with a standard five-year parts warranty and 20-year heat exchanger warranty, and with registration, homeowners get up to 10 years on parts and a lifetime heat exchanger warranty.
Special installation requirements: Units ship with a field-installed external condensate drain trap, which can be mounted up to 5 feet away from the furnace.
Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com
eProduct: 192
Serviceability features: All Continental gas furnaces include modular design and components to ensure that maintenance and service are incredibly easy. Napoleon's Premium Series heat pump comes with refrigerant, which means contractors only have to vacuum the line set between the outdoor and the furnace. No refrigerant charge required in the field to accommodate additional piping. Includes self-diagnostic system, which reduces troubleshooting
Noise-reduction features: Air-source heat pump compressor includes a jacket to reduce potential vibration, creating the lowest noise level in the category. Smooth ramp up/down ensures the quietest operation of equipment.
IAQ equipment supported: UV-C air sanitization technology comes already installed in the Premium 9700 series to stop pathogens and viruses from spreading through the home's air.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Hybrid heating combines a cold-climate, air-source heat pump and a furnace, using electricity and alternate fuel (natural gas or propane). The EQHub smart thermostat manages the system to provide optimal functionality based on selection of comfort, low-cost, quietness, or green, controllable through the EQHub or the Continental Home app. EQHub combines the advantages of both electric and gas systems, offering increased energy efficiency, cost savings, and greater flexibility in adapting to weather conditions.
Warranty information: Three-year limited warranty. Premium Series heat pump is 10-year parts and compressor limited warranty, and 9700 Series furnace includes 15-year unit replacement and lifetime heat exchanger limited warranty.
Special installation requirements: Complete the hybrid heating registration for homeowner's to receive their customized solution, maximizing the benefits of the EQHub and Napoleon Home app at www.napoleon.com/en/ca/heating-cooling/product-registration-eqhub-smart-thermostat
Contact: Wolf Steel, 705-770-7748; www.continentalcomfort.com/en/home
eProduct: 193
Serviceability features: Advanced features engineered into these systems improve comfort, cleanliness, and usability, while simplifying maintenance. A novel CLEAN operation dries the indoor unit interior, reducing the amount of condensation present. A detachable drain pan allows for easy cleaning. Built-in Wi-Fi can be controlled via the internet using the Daikin Comfort Control app without needing an additional adaptor. A pure, single-component refrigerant, R-32 is easy to top off, clean, and reuse on-site or reclaim and recycle.
Noise-reduction features: Inverter-powered systems run continuously, while adjusting the compressor’s speed to meet indoor comfort demand. This allows Atmosphera systems to operate more quietly throughout the day, while delivering more consistent temperature.
IAQ equipment supported: Air filters are removable and washable.
Thermostat compatibility: Requires Daikin One+ smart thermostat. Also, the Daikin DKN Plus Interface enables control by third-party thermostat or automation system.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The Atmosphera single-zone system features R-32 and offers impressive efficiency gains with one-third the GWP of North America’s most used refrigerants. Provides up to 100% rated heating capacity at 5°F wet bulb and confirmed continuous operation as low as -13°F wet bulb. Up to 100% rated cooling capacity at 115°F dry bulb. New hybrid cooling technology efficiently controls humidity, even in low-cooling loads, and maintains dehumidification effect after reaching target temperatures. Intelligent Eye room movement sensor.
Warranty information: Twelve-year parts limited warranty. Complete warranty details available from the local dealer/contractor or at www.daikincomfort.com. To receive the 12-year parts limited warranty, online registration must be completed within 60 days of installation. Online registration and some additional requirements are not required in California or Québec. The duration of warranty coverages in Texas and Florida differs in some cases.
Special installation requirements: The Atmosphera features increased factory charge and piping allowances and is pre-charged to serve lengths up to 49 feet, a 50% increase in pre-charge coverage compared to previous models. Indoor units include a wireless infrared controller and are compatible with the full suite of optional s21-based single- and multi-zone controls solutions, including the Daikin One+ smart thermostat. The new Daikin DKN Plus Interface enables energy-efficient control by a third-party thermostat or an automation system.
Contact: Daikin Comfort Technologies North America Inc., 713-861-2500; northamerica-daikin.com
eProduct: 194
For extreme weather conditions.
Serviceability features: Compact, lightweight units are very easy to install and service. Anti-corrosion treatment on heat exchanger adds long-life performance. Daikin’s interactive SplitXpress Selection Tool mobile app/website lets contractors create equipment selections, as well as add accessories and pricing details to quickly share quotes with customers (free on Apple app Store/Google Play and at https://splitxpress.daikincity.com). Compatible with DKN Cloud Wi-Fi Adaptor, enabling remote control of Daikin indoor units via iOS/Android app.
Noise-reduction features: These ultra-efficient heat pump systems operate very quietly, as low as 19 dBA indoors and 49 dBA outdoors, making both indoor and outdoor living more serene. The outdoor unit’s Quiet Operation can reduce sound levels by 3 dB for times when even quieter operating levels are desired.
IAQ equipment supported: A sophisticated IAQ design combines the air-purifying filter and titanium apatite photocatalytic deodorizing filter in a single, highly effective unit. The advanced filtration also features a long-life washable filter.
Thermostat compatibility: Requires a special thermostat. Optional Daikin app or Daikin One+ Smart Thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Engineered to withstand extreme weather conditions, providing up to 100% heating capacity at 5°F (-15°C) and operating efficiently as low as -13°F ambient temperature. Outdoor unit drain pans optimized to help prevent condensate from freezing and causing damage to the fan and coil. Intelligent Defrost Mode optimizes duration and frequency of defrost operation based on system location and how it’s used. Program Dry mode allows humidity levels to be reduced. Hot Start reduces cold drafts.
Warranty information: Twelve-year parts limited warranty. Online registration must be completed within 60 days of installation. Online registration and some additional requirements are not required in California or Quebec. The duration of warranty coverages in Texas and Florida differs in some cases. Complete warranty details available from the local dealer or at www.daikincomfort.com.
Special installation requirements: Daikin AURORA multi-zone systems are a flexible solution for individual zone comfort. Connecting up to four indoor units to a single outdoor unit reduces installation space and costs while maximizing comfort and energy efficiency. The compact size makes it suitable for both new construction and renovation projects. An ideal solution for primary living areas (living and master bedrooms); hot or cold rooms; rooms with poor airflow; renovations/remodeling; plus basements, attics, and garages.
Contact: Daikin Comfort Technologies North America Inc., 713-861-2500; northamerica-daikin.com
eProduct: 195
Mdulating, variable-speed, communicating furnace.
Serviceability features: Conveniently designed for multi-position installation. Easy-to-install top venting with optional side venting. Convenient left or right connection for gas/electrical service. Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications. Self-diagnostic control board with constant memory fault code history to dual seven-segment display. Self-calibrating modulating gas valve. Durable silicon nitride igniter. Compatible with Daikin ONE+ smart thermostat and other Daikin communicating equipment for easier commissioning/servicing.
Noise-reduction features: Energy-efficient, variable-speed ECM and induced-draft motors gently ramp up or down, providing quiet system startup and operation. Multiple, continuous fan speed options offer quiet air circulation. Fully insulated heat exchanger and blower section inside a thermally insulated cabinet produces air leakage of less than 2%, further reducing blower noise.
IAQ equipment supported: Compatible with the Daikin Premium Air Cleaner to provide cleaner indoor air; it is intuitively designed with outer dimensions that match original equipment furnace and air handler cabinets for quick installation. Also compatible with the Clean Comfort Indoor Air Essentials line of filtration, humidification, dehumidification, purification, ventilation, and zoning products, plus other IAQ equipment. Includes color-coded, low-voltage terminals with provisions for an electronic air cleaner and 120-V or 24-V humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Earned Most Efficient of Energy Star 2023. With its variable-speed blower motor, this modulating gas furnace typically runs at the lowest possible speed, precisely maintaining a constant, steady temperature and delivering optimal heating performance. Uniquely designed, heavy-duty, tubular, stainless steel primary heat exchanger provides outstanding durability and heat transfer. Secondary stainless steel heat exchanger adds increased efficiency. Self-calibrating modulation gas valve auto-configures for each installation. Rugged silicon nitride igniter. Heavy-gauge steel cabinet with durable finish.
Warranty information: Lifetime heat exchanger limited warranty (good for as long as home is owned by original purchaser), a 12-year unit replacement limited warranty, and a 10-year parts limited warranty with online registration. Online registration and some additional requirements are not required in California or Quebec. Complete warranty details available from the local dealer or at www.daikincomfort.com. The duration of warranty coverages in Texas and Florida differs in some cases.
Special installation requirements: Certified for direct vent (two-pipe) or non-direct vent (one-pipe) installations. Auto-comfort and enhanced dehumidification modes are available. AHRI certified and ETL listed.
Contact: Daikin Comfort Technologies North America Inc. (Daikin), 713-861-2500; northamerica-daikin.com
eProduct: 196
With ducted gas furnace, heat pump, or dual fuel.
Serviceability features: The lightweight FIT's small footprint allows for easy placement. Quick side-panel maintenance access. Sweat connection service valves with easy access to gauge ports. Self-diagnostic control board with diagnostic indicator lights, seven-segment LED display, and fault-code storage. Inverter board cooled by refrigerant circuit. Coil and ambient temperature sensors. Suction pressure transducer. Intelligent defrost mode. Advanced water-shedding drain pan engineered with multiple drain holes and channels. Blue Fin coil coating for longer condenser life and reliability.
Noise-reduction features: With sound pressure levels as low as 55 dBA, the FIT's inverter-driven compressor and side discharge deliver remarkably quiet outdoor unit operation. This provides extraordinary flexibility when it comes to installation. FIT can be installed anywhere low-sound levels are important, including areas near lot lines and other sensitive applications. The quiet compact FIT allows homeowners to reclaim their outdoor space and serenity.
IAQ equipment supported: Daikin One ecosystem compatible with optional air cleaner modules, humidifiers, dehumidifiers, ultraviolet air purifiers, and fresh air ventilation accessory systems. The Daikin One+ and Daikin One touch smart thermostats with Daikin One Home Air Monitor provide a communicating system that lets technicians and homeowners “Visualize The Air.” Daikin Premium Air Cleaners are designed specifically for FIT systems and include a MERV 15 media filter that removes more than 85% of particles down to 0.3 microns.
Thermostat compatibility: Requires a special thermostat. Daikin One+ and Daikin One touch smart thermostats specifically designed to optimize FIT system.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Daikin FIT is an innovative, flexible smart cooling only, gas heat, heat pump or dual fuel HVAC system with matching condenser, controls, gas furnace, and evaporator coil. These systems are engineered with high performing, quiet, Daikin, swing, variable-speed, inverter compressors and side discharge cabinet designs that are smaller, lighter, and quieter than traditional residential unitary outdoor condensing units. Hot start technology prevents cold drafts from being released into the room.
Warranty information: Backed by 12-year parts limited warranty and 12-year unit replacement limited warranty. Complete warranty details available from the local dealer or at daikincomfort.com. Online registration must be completed within 60 days of installation. Additional requirements for annual maintenance are required for the unit replacement limited warranty. Online registration and some of the additional requirements are not required in California or Quebec. The duration of warranty coverages in Texas and Florida differs in some cases.
Special installation requirements: Compact, lightweight Daikin FIT outdoor units are affordable, efficient, and space saving, opening up installation options for technicians, while allowing more units to be carried on service trucks, reducing drives back to the dealer. Furnaces and evaporator coils include horizontal, upflow, and downflow configurations, with furnace efficiencies from 80% to 98% AFUE. Field-installed bi-flow filter drier. In communicating mode, only two low-voltage wires to outdoor unit are required. Field-selectable boost mode increases compressor speed during unusually high loads.
Contact: Daikin Comfort Technology North America Inc., 713-861-2500; northamerica-daikin.com
eProduct: 197
18 single-zone heat pump.
Serviceability features: The DLCURA heat pump has standard heat and high heat options with an auto-restart function. All units include factory-installed base pan and crankcase heaters, low-voltage controls, and 24-V interface. It also offers traditional unitary line set sizes for easy installation.
Noise-reduction features: Variable-speed compressor and compact ECM fan motor operate at quieter, lower speeds most of the time (as low as 54 decibels). To reduce noise at maximum performance, units are equipped with isolation compressor grommets.
IAQ equipment supported: Compatible with most industry IAQ offerings.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The DLCURA heat pump achieves heating efficiencies up to 10 HSPF2 and cooling efficiencies up to 18 SEER2. Specific systems are Energy Star-certified, based on unit pairing. These Day & Night models have a broad temperature range, allowing for customized comfort. Select units can provide heating during frigid temperatures as low as -22°F (-30°C) and cooling even when outdoor temperatures reach as high as 130°F (55°C).
Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Limited warranty period is five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details and restrictions.
Special installation requirements: The DLCURA utilizes traditional unitary line set sizes and requires the installation of a filter drier. It does not require the insulation of liquid or suction lines.
Contact: International Comfort Products, 463-245-4015; www.dayandnightcomfort.com
eProduct: 198
Serviceability features: Self-configuring communicating control makes system installation easy. Direct-vent (two-pipe), single-pipe venting, or combustion air venting for application flexibility. Slide-out heat exchanger and blower assembly for ease of service. These gas furnaces feature large, robust, one-quarter turn knobs for easy door removal and secure attachment.
Noise-reduction features: Two-speed induced draft combustion blower and variable-speed constant airflow ECM blower motor reduce operating sound levels. The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.
IAQ equipment supported: When coupled with a Day & Night Ion System Control, the G96CTN Ion 96 furnace provides longer heating and cooling cycles at lower fan speeds for a more consistent temperature throughout the home. Intuitive prompts allow homeowners to program everything from humidity levels to fan speeds, giving them the ultimate control over their home comfort.
Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring functions available only when used with the Day & Night Ion System Control.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Day & Night G96CTN Ion 96 furnaces are built with stainless steel secondary heat exchangers. Two-stage heat and variable-speed cooling compatible, this furnace is equipped with a variable-speed, constant airflow, ECM blower motor for extra SEER with select cooling equipment and consistent comfort. Designed for four-way multi-position installation with 12 different vent options. Meets 40 ng/J low NOx emissions and <2% cabinet air leakage per ashrae standard 193.< p>
Warranty information: Ten-year No Hassle Replacement limited warranty. (If heat exchanger fails due to defect during applicable limited warranty time period, one-time replacement with comparable unit will be provided.) Lifetime heat exchanger/10-year parts limited warranty to original purchaser with timely registration. Limited warranty is 20-year heat exchanger/five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details/restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.dayandnightcomfort.com
eProduct: 199
2%>
Serviceability features: New 97% constant torque furnaces are built on the same platform dealers use today and offer simplified service by using consistent parts with existing models, helping to ensure they have the right parts during a service call. Thumb screw door access, forward-facing fasteners, realignment guides for key components, and a full slide-out blower make service and routine maintenance easy.
Noise-reduction features: These models feature an isolated burner section and an insulated cabinet help to reduce operating sound while each burner runs at a lower Btu input per burner to help reduce sound while running.
IAQ equipment supported: The 97G2E is equipped with a removable floor base and offers pre-marked guides for cutting in a side return to support application flexibility for advanced filtration options.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The 97G2E provides dealers with a full line of constant torque furnaces that meet the qualifications for 25C tax credits and may qualify for other local incentives. Designed with installation in mind, all models offer dealers convertible-ready upflow to horizontal left -or right-side installation with no modifications needed. Pre-bent and pre-drill duct flanges help by making coil and duct connections ready out of the box and help make sealing the connection easier.
Warranty information: Standard five-year parts warranty and 20-year heat exchanger warranty. With registration, homeowners get up to 10 years on parts and a lifetime heat exchanger warranty.
Special installation requirements: Units ship with a field-installed external condensate drain trap, which can be mounted up to 5 feet away from the furnace.
Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com
eProduct: 200
Serviceability features: New 97% constant torque furnaces are built on the same platform dealers use today and offer simplified service by using consistent parts with existing models, helping to ensure they have the right parts during a service call. Thumb screw door access, forward-facing fasteners, realignment guides for key components, and a full slide-out blower make service and routine maintenance easy.
Noise-reduction features: These models feature a variable-speed, indoor blower motor that helps reduce operating noise at lower speeds. An isolated burner section and an insulated cabinet help to reduce operating sound while each burner runs at a lower Btu input per burner to help reduce sound while running.
IAQ equipment supported: The 97G2V helps to provide enhanced dehumidification in cooling operation and supports other third-party IAQ accessories. It is equipped with a removable floor base and offers pre-marked guides for cutting in a side return to support application flexibility for advanced filtration options.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The 97G2V provides dealers with a full line of variable-speed furnaces that meet the qualifications for 25C tax credits and may qualify for other local incentives. Designed with installation in mind, all models offer dealers convertible-ready upflow to horizontal left- or right-side installation with no modifications needed. Pre-bent and pre-drill duct flanges help by making coil and duct connections ready out of the box and help make sealing the connection easier.
Warranty information: Standard five-year parts warranty and 20-year heat exchanger warranty and with registration, homeowners get up to 10 years on parts and a lifetime heat exchanger warranty.
Special installation requirements: Units ship with a field-installed external condensate drain trap, which can be mounted up to 5 feet away from the furnace.
Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com
eProduct: 201
Serviceability features: Multi-positional, allowing installers to use it an either upflow, downflow, or horizontal applications. It uses easy glide, slide-out, A-coil and blower assemblies for effortless transitions. Two-piece modular cabinet design allows for installers to disconnect the cased coil and blower sections, giving installation flexibility. Easy-to-remove access panels. Easy-to-remove thermostat and control board Snap Lock mount. Corrosion-proof plastic drain pan with primary and secondary connections. Durable steel cabinet.
Noise-reduction features: Closed cell insulated cabinet.
IAQ equipment supported: Compatible with most external IAQ accessories.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Modular two-piece cabinet design, easy glide A-coil and blower assemblies, and factory-installed 75 VA transformer with circuit breaker.
Warranty information: Three-year parts only standard warranty and 90-day out-of-box assurance. Optional extended warranties: 10-year parts; five-year parts and five-year labor; and 10-year parts and 10-year labor.
Special installation requirements: N/A
Contact: Enertech Global; enertechusa.com
eProduct: 202
Serviceability features: All electrical components and control board are serviceable from front of the unit. Slide-out cooling chassis for ease of maintenance, service, and replacement. Easily accessible refrigeration service ports located on exterior of cooling chassis with temperature probe area. Slide-out heating section for ease of maintenance, service and replacement. Sight glass that allows for viewing the control board status codes and main burner function.
Noise-reduction features: Fully insulated cabinet.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Blower collar locking mechanism to improve seal between cooling chassis and cabinet. High-efficiency ECM blower motors. Dual inlet indoor blower to lower fan RPMs, improve efficiency, and reduce noise. High-efficiency single-stage scroll and rotary compressors. Double isolated compressor mount to lower compressor noise and vibration. Factory-installed condensate float switch for overflow protection. High- and low-pressure switch protection.
Warranty information: Five-year limited parts on compressor and all other covered components and 20-year limited parts on heat exchanger.
Special installation requirements: Self-contained packaged units with gas-fired heating and electric cooling. Pre-wired and pre-charged with R-410A refrigerant. Eliminates the need for outdoor condensers, electrical, refrigerant piping, and external venting. Requires a sleeve.
Contact: First Co., 214-388-5751; www.firstco.com
eProduct: 203
Serviceability features: The FSH1BG has hinged access panels to all controls and the compressor to make servicing easier for contractors. It also includes a common suction service port that allows the contractor to read the suction pressure without removing any panels. There is a removable top grille, which allows ease of service from the top without disconnecting fan motor leads. Side panels can also be easily removed and replaced without removing the top grille.
Noise-reduction features: The FSH1BG has a sound rating as low as 58 dB, depending on operating conditions. It includes a compressor sound blanket that's engineered to significantly reduce unwanted compressor noise, and a discharge muffler that reduces compressor noise and vibration. There is a heavy duty brushless DC motor to provide quiet operation.
IAQ equipment supported: When the FSH1BG is paired with a B64 air handler, this system utilizes dehumidification capabilities from the thermostat or duct-mounted humidistat.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This unit has a cooling range of 50°F to 125°F. There is adaptive demand defrost that provides additional energy savings in heating by defrosting only when necessary. This unit has an inverter-driven, Samsung, rotary compressor that provides five capacities in modulating operation from a two-stage thermostat.
Warranty information: Out-of-the-box, five-year limited parts and five-year compressor warranties. If registered within 90 days, the limited parts and compressor warranties extend to 10 years. Additionally, when registered, the FSH1BG features a 10-year quality pledge to replace the entire unit with a like unit if the compressor fails.
Special installation requirements: None
Contact: NGH, 800-422-4328; nortekhvac.com
eProduct: 204
Serviceability features: The removable top grille allows service from the top without disconnecting fan motor leads. It has a common suction service port that allows the contractor to read the suction pressure in all modes of operation without removing panels. The access panels are provided to all controls and the compressor from the side of the unit for easy access. Side panels can be easily removed and replaced without removing the top grille.
Noise-reduction features: The FSH3BF has a sound rating of 73 db. There is a composite base pan that absorbs sound, and there is a compressor sound blanket engineered to significantly reduce unwanted compressor noise. The swept wing fan blade also significantly reduces unwanted noise.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The FSH3BF Series heat pumps have a Copeland Scroll two-stage compressor that operates at two different capacity points, providing superior comfort and efficiency. Units are designed using galvanized steel, and they pass 950 hours of salt spray per ASTM Std. B117. Demand defrost saves energy by defrosting only when necessary. There is a five minute delay when a unit shuts down before it restarts, eliminating the highest cause for compressor failure.
Warranty information: Out-of-the-box, five-year limited parts and five-year compressor warranties. If registered within 90 days, the limited parts and compressor warranties extend to 10 years. Additionally, when registered, the FSH3BF features a 10-year quality pledge to replace the entire unit with a like unit if the compressor fails.
Special installation requirements: None
Contact: NGH, 800-422-4328; nortekhvac.com
eProduct: 205
Serviceability features: This heat pump is designed for easy servicing. Critical components are arranged in a user-friendly, easy-to-access design and common-sized screws are used throughout. The 45-degree service valves make for easy gauge access, and the removable wire fan guard is easy to remove and service.
Noise-reduction features: The swept wing fan blades create optimal airflow for better performance, and the integrated venturi rings, factory-installed compressor sound blankets, compressor isolating grommets, and scroll compressor technology all contribute to reduced operating sounds.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The heat pump features a high-efficiency inverter compressor and durable aluminum alloy tube and fin coils for optimal performance in a broad range of applications.
Warranty information: Ten-year warranty with registration. The covered equipment and covered parts and compressor are warrantied for a period of five years from the date of the original installation when installed in a residential application. All covered heat exchangers are warrantied for a period of 20 years from the date of the original installation in a residential application.
Special installation requirements: Application flexibility via field-selectable dip-switches to optimize performance, efficiency, and defrost.
Contact: GE Appliances, a Haier Co., Air & Water Solutions; www.geappliancesairandwater.com
eProduct: 206
GXH (**)-(**)MSK4DH
Serviceability features: The side discharge unit provides installation flexibility. The unit fits on standard mini-split-style mounting brackets. It's capable of braze‐free-installation. The system's automatic diagnostics feature continuously scans for errors or malfunctions, and fault codes are shown on the unit's display. The control board has a seven-segment display that indicates errors on an easy‐to‐read display. Units are pre‐charged for 31 feet of line set and no refrigerant adjustments are needed for less than 31 feet.
Noise-reduction features: These units can reach levels as low as 55 dB, depending on the capacity and operating conditions.
IAQ equipment supported: Matching indoor air handler equipment supports plug-in heater kits and built-in filter rack, while the matching air handlers provide humidification control and dehumidification capabilities from a thermostat or duct-mounted humidistat.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This unit has a cooling range of 5°F to 130°F, with a 100% nominal cooling capacity up to 115°F. While its heating performance ranges from -22°F to 75°F, with 100% nominal heating capacity down to -5°F and 78% heating capacity down to -22°F. The outdoor coil has a coating tested at 1500 hours of salt spray. Each unit has rifled copper tubing that improves refrigerant flow characteristics and improves heat exchange capabilities.
Warranty information: Out-of-the-box five-year parts and seven-year compressor warranty.
Special installation requirements: None
Contact: NGH, 800-422-4328; nortekhvac.com
eProduct: 207
Modulating, variable-speed, ECM, gas furnace.
Serviceability features: Innovative ComfortBridge technology helps ensure peak, energy-efficient performance, while simplifying commissioning, diagnostics, and servicing via the CoolCloud mobile application. Features include: self-diagnostic control board; dual seven-segment display; and durable silicon nitride igniter. Self-calibrating modulating gas valve auto-configures for each installation. Designed for multi-position installation with easy-to-install top venting; optional side venting; convenient left or right connection for gas/electrical service; and airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications.
Noise-reduction features: The efficient and quiet variable-speed airflow system gently ramps up or down according to heating demand. A quiet, variable-speed induced draft blower and multiple continuous fan speed options offer quiet air circulation. A fully thermally insulated cabinet means air leakage of less than 2% to maximize heat transfer efficiency, while reducing blower noise.
IAQ equipment supported: Compatible with IAQ equipment including the Clean Comfort Indoor Air Essentials line of filtration, humidification, dehumidification, purification, ventilation, and zoning IAQ products. The GMVM97 gas furnace includes color-coded low-voltage terminals with provisions for an electronic air cleaner and 120-V or 24-V humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Goodman's heavy duty, aluminized steel, tubular, primary heat exchanger employs distinctive wrinkle-bend technology, developed to deliver extraordinary durability. Paired with a stainless steel, sloped, secondary heat exchanger, this combination provides reliability, durability, and efficiency. Recognized with a Dealer Design Award from The NEWS, ComfortBridge technology continuously monitors system performance for customized, consistent indoor comfort. The CoolCloud mobile/tablet app enables technicians to commission, configure, and diagnose systems quickly and accurately. Can use communicating and non-communicating two-stage or single-stage thermostats.
Warranty information: Lifetime heat exchanger warranty, 10-year unit replacement limited warranty, and 10-year parts limited warranty. Complete warranty details are available from the local dealer/contractor or at goodmanmfg.com. To receive the limited warranties, online registration must be completed within 60 days of installation. Online registration and some additional requirements are not required in California or Québec. The duration of warranty coverages in Texas and Florida differs in some cases.
Special installation requirements: Certified for direct vent (two-pipe) or non-direct vent (one-pipe). Auto-Comfort and enhanced dehumidification modes are available. Complies with California 40 ng/J low NOx emissions standard.
Contact: Goodman Mfg. Co. L.P., 713-861-2500; goodmanmfg.com
eProduct: 208
With Smart Speed inverter technology.
Serviceability features: ComfortBridge technology compatible, allowing for easy commissioning, diagnostics, and servicing via the CoolCloud mobile application. Advanced ComfortAlert diagnostics constantly monitor the system, reducing failures and pinpointing trouble spots for a fast fix. Factory-installed features include suction line accumulator; compressor crankcase heater; high-capacity muffler; high-/low-pressure switches; and coil/ambient temperature sensors. Sweat connection service valves with easy gauge-port access; contactor with lug connection; top/side maintenance access; and single-panel access to controls with space for field-installed accessories.
Noise-reduction features: Inverter-driven heat pumps operate at lower sound levels without the constant on/off of single- and two-stage systems, giving homeowners new levels of acoustical comfort. To help reduce noise further, the GVZC20 features a quiet DC outdoor fan motor, a high-density, acoustically engineered sound control blanket, and a specially designed sound-control top.
IAQ equipment supported: Compatible with IAQ equipment including the Clean Comfort Indoor Air Essentials line of filtration, humidification, dehumidification, purification, ventilation, and zoning IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Smart Speed inverter technology automatically adjusts compressor and condensing fan motor speeds based on indoor comfort demand. This helps prevent common temperature swings experienced with non-inverter, single-, and two-stage units. Inverter-driven systems can reach indoor comfort settings quicker, while continually dehumidifying homes to balance heat load. Through increased efficiency and operation, inverter technology can also reduce compressor wear and tear. SmartShift specialized time-delay defrost technology allows for reliable, quiet, smooth transitions when entering defrost mode.
Warranty information: Lifetime compressor limited warranty, 10-year unit replacement limited warranty, and 10-year parts limited warranty. Complete warranty details available from the local dealer/contractor or at goodmanmfg.com. To receive the limited warranties, online registration must be completed within 60 days of installation. Online registration and some additional requirements are not required in California or Québec. The duration of warranty coverages in Texas and Florida differs in some cases.
Special installation requirements: In communicating mode, only two low-voltage wires to outdoor unit are required. Comes fully charged for 15 feet of tubing length. Field-selectable boost mode can be used to increase compressor speed during unusually high loads. Field-installed bi-flow filter drier. When properly anchored, meets the 2017 Florida Building Code unit integrity requirements for hurricane-type winds (anchor bracket kits available). Salt spray tested for 500 hours.
Contact: Goodman Mfg. Co. L.P., 713-861-2500; goodmanmfg.com
eProduct: 209
Serviceability features: When paired with the Ion System Control with Wi-Fi capability, the Heil H4H7T Ion 17 heat pump provides remote system control, self-configuring capabilities, and text-based diagnostics. An innovative control box design, external high and low refrigerant service ports, and quick-access service valves make the H4H7T easy to install and service.
Noise-reduction features: The H4H7T heat pump delivers reliable heating and cooling using a two-stage scroll compressor that operates mostly in a quieter (as low as 69 decibels) and more efficient low stage. All units include compressor sound jackets for minimal noise.
IAQ equipment supported: Compatible with most industry IAQ offerings.
Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring functions only available when used with the Heil Ion System Control.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the H4H7T heat pump achieves efficiencies up to 8.1 HSPF2/17 SEER2/13 EER2. This two-stage heat pump is Energy Star qualified. It provides improved temperature and humidity control with its efficient scroll compressor.
Warranty information: Ten-year No Hassle Replacement limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Limited warranty is five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details/restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.heil-hvac.com
eProduct: 210
Serviceability features: The new near field communication (NFC)-compatible control board of the Heil N96MSN Performance 96 furnace provides connectivity with the updated Fast OEM Mobile Tech app through NFC. NFC is the same technology behind “tap to pay” using either a credit card or smart phone. Also, the new, three-digit, LED, control board display and navigation allows technicians to easily see the current operating mode of the furnace, review fault code history, and update installation settings.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The N96MSN Performance 96 furnaces include new, multi 18-speed, constant torque, ECM (MCT) blower motors with increased airflows of up to 28%. Transitioning to MCT motors provides an industry-leading 18 speeds versus the five speeds previously offered in ICP Performance Series furnaces. This change also makes replacement blower motor inventory easier to manage, with a 70% reduction in unique blower motor part numbers.
Warranty information: Twenty-year heat exchanger warranty and five-year warranty for all other parts. All warranty periods begin on the date of original installation. Reference warranty card for more information and terms.
Special installation requirements: NFC features work only when the furnace is powered down. However, this allows technicians to update settings away from the job site and is particularly useful for residential new construction jobs when using the “Saved Favorites” functionality of the app.
Contact: International Comfort Products, 463-245-4015; www.heil-hvac.com
eProduct: 211
Serviceability features: The MG2R can be vertically or horizontally vented using a two-pipe system for maximum flexibility in installation. There's a low-voltage terminal board for easy field wiring and an easy-open pawl latch for easy removal for access. There are color-coded wire harnesses designed to fit the components, all with quick-connect fittings. There are also designated lights for flame signal strength to recognize states without counting flashes.
Noise-reduction features: The MG2R has a clean and quiet operation due to the unique design of in-shot burners, location of inducer, and ease of installation.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This unit has an innovative application of silicon nitride type igniter. Utilizes proven Smartlite technology to extend igniter life. It has a multi-speed ECM blower designed to give a wide range of cooling capacities. Switches on PCB provide ultra-easy motor speed selection, and a 40-VA transformer included. There are diagnostic lights for easy troubleshooting without counting flashes.
Warranty information: Out-of-the-box one-year limited parts warranty, one-year product assurance commitment, and 20-year heat exchanger warranty. If registered within 60 days of installation, the limited parts warranty extends to five years.
Special installation requirements: None
Contact: NGH, 800-422-4328; nortekhvac.com
eProduct: 212
With SmartSense technology.
Serviceability features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the KeepRite CVH8 Ion 18 heat pump offers more precise system control with remote access, text-based diagnostics, and contractor information displayed. Smaller, lighter design than most two-stage units. Easy-access service valves.
Noise-reduction features: The CVH8 includes several sound-reducing features: an aerodynamic variable-speed fan, a soft-mounted compressor, a high performance acoustic-absorbing compressor blanket, and Quiet Shift defrost. The variable-speed compressor and compact ECM fan motor operate at quieter, lower speeds most of the time (as low as 56 decibels). Soft start and smooth ramp-up to operating speeds.
IAQ equipment supported: Compatible with most industry IAQ offerings.
Thermostat compatibility: Compatible with most thermostats. Five-stage operation, communicating, and self-configuring functions only available when used with the KeepRite Ion System Control.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the CVH8 heat pump provides five-stage variable-speed technology in a compact design. It is Energy Star qualified with efficiencies up to 9 HSPF2/18.5 SEER2/12 EER2.
Warranty information: Ten-year No Hassle Replacement limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Limited warranty is five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details/restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.keeprite.com
eProduct: 213
Serviceability features: The KeepRite PHR5 QuietComfort 15 packaged heat pump installs easily on rooftop or ground level. Three panels allow easy access for maintenance and installation. Easily converts to down shot application for vertical ductwork and installs.
Noise-reduction features: Includes a two-stage Copeland Scroll compressor, which operates the majority of the time in the quieter, lower stage. The PHR5 also has a two-stage heating system that offers similar comfort benefits in the heating mode. Outdoor fan is sized and designed for minimal noise.
IAQ equipment supported: Enhanced dehumidification is available on high stage cooling with use of a dehumidistat. Accessory filter racks support 2-inch filters.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Two-stage Copeland Scroll compressors provide two-stage heating and cooling operation. PHR5 units include field-convertible airflow for either ground level (horizontal) or rooftop (down) airflow and high-efficiency, ECM, indoor blower motors. With efficiencies up to 7.5 HSPF2/15.5 SEER2/11.5 EER2, the PHR5 packaged heat pumps are Energy Star qualified.
Warranty information: Five-year No Hassle Replacement limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, a one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Limited warranty is five-year parts if not registered within 90 days of installation. Registration not required where warranty benefits cannot be conditioned on registration. See warranty certificate for details and restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.keeprite.com
eProduct: 214
MFTHW 100, 140, 199
Serviceability features: The unit can be installed in small spaces, allowing for more living space and less mechanical room space. It features an easy-to-use dial and push button input system with large backlit display, making functions clear for quick setup and diagnostics. It has quick access buttons for temperature control and boiler status functions, as well as an outdoor reset feature for fuel savings.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The FT Series, advanced, fire tube heat exchanger uses the latest technology in fire tube construction with a corrosion-resistant stainless steel design, resulting in quick heating response, ultra high efficiency, and years of reliable service.
Warranty information: Ten-year heat exchanger and five-year parts
Special installation requirements: The Laars FT Series comes with many included components to make installation easier. These items include an internal circulator, primeless condensate trap, auto air eliminator vent, wall mounting kit, outdoor sensor, and propane conversion kit. Optional installation accessories include condensate neutralizer kit, piping manifolds, and various vent terminals.
Contact: Laars Heating Systems; www.laars.com
eProduct: 215
Serviceability features: The SL25XPV streamlines serviceability with enhanced commissioning features. Accessible readings for refrigerant pressure, temperature, superheat, and subcooling are conveniently available through the Lennox Dealer app, online dealer dashboard, and the connected smart thermostat. The heat pump’s user-friendly design boasts SmartHinge louver panels, a variable-capacity compressor, and a factory-installed filter drier.
Noise-reduction features: Engineered with SilentComfort technology, the SL25XPV ensures the ultimate in quiet performance. The precision-balanced, direct-drive fan allows the unit to primarily operate at low speeds ensuring a smooth, quiet operation. The incorporated sound-dampening system absorbs outdoor noise for operating volume as quiet as 55 dB, or the sound of a microwave.
IAQ equipment supported: Lennox offers the ultimate whole-home air purification that senses, communicates, and cleans the air in the home. In fact, the PureAir and PureAir S Air Purification Systems, equipped with the Lennox Healthy Climate Carbon Clean 16 air filter, remove over 99% of the virus that causes COVID-19 from the air. These systems are compatible with MERV 11, MERV 13, and MERV 16 filters, ensuring whole-home purification for perfect air, prioritizing the safety and comfort of homeowners.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The SL25XPV is a precise and efficient heat pump that delivers a greater amount of heat than traditional heat pumps through the use of Lennox TruHeat Performance. Paired with the Lennox S40 Smart Thermostat, it forms a fully communicating home comfort system that monitors sensors. With up to 23.2 SEER2 and 9.8 HPSF2 efficiencies, it reduces energy bills significantly, while ensuring a comfortable and quiet home.
Warranty information: Ten-year limited warranty on covered components including compressor.
Special installation requirements: The SL25XPV, when paired with the Lennox S40 Smart Thermostat, simplifies installation through enhanced commissioning features. Contractors can access essential readings for refrigerant pressure, temperature, superheat, and subcooling conveniently via the Lennox Dealer app, online dealer dashboard, and the S40 thermostat. This integration ensures a smoother setup process and gives contractors better control over the heat pump's performance.
Contact: Lennox Residential; www.lennox.com
eProduct: 216
Serviceability features: The unit offers complete service access with a tool-free cabinet door removal. The burner assembly can be detached as a single component for quick maintenance. The blower assembly is also easily removable for servicing. A safety interlock switch ensures power shuts off when opening the blower compartment access door. Adjusting blower speed is simple through a DIP switch change on the furnace control. Additionally, the trap's drain cap allows effortless cleaning and winterizing.
Noise-reduction features: Even with all of its impressive power, this furnace is extremely quiet and has been engineered to run at variable-speed to drastically minimize sound. Its trademarked SilentComfort technology includes a proprietary design, testing process, and the following components that lead to it being extremely quiet: sealed burner box, modulating gas valve, variable-speed fan motor, and fully insulated blower compartment.
IAQ equipment supported: Lennox offers the ultimate whole-home air purification that senses, communicates, and cleans the air in the home. In fact, the PureAir and PureAir S Air Purification Systems, equipped with the Lennox Healthy Climate Carbon Clean 16 air filter, remove over 99% of the virus that causes COVID-19 from the air. These systems are compatible with MERV 11, MERV 13, MERV 16 filters, ensuring whole-home purification for perfect air, prioritizing the safety and comfort of homeowners.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The SLP99V is a modulating gas furnace with up to 99% AFUE, a variable-speed fan motor, and enhanced commissioning measuring heat rise, temperature drop, CFM, and line voltage check for ease of installation. Its Precise Comfort technology allows for consistent temperatures and optimized energy consumption. Up to 10 times quieter than competitive models, recognized as one of the Most Efficient Energy Star-certified products, and smart-home compatible, the SLP99V is one of the quietest, most efficient furnaces available.
Warranty information: Lifetime heat exchanger and 10-year parts.
Special installation requirements: To receive full communicating and enhanced commissioning benefits, the SLP99V must be installed with a Lennox smart communicating thermostat and the factory-included discharge air temperature sensor. Installation location is included within the installation manual for contractor convenience and Precise Comfort benefit.
Contact: Lennox Residential; www.lennox.com
eProduct: 217
Connected to LG Multi V S outdoor unit (ODU), ARUM048GSS5.
Serviceability features: Technical support offered over the phone at 888-865-3026, Monday to Friday, from 8 a.m. to 6 p.m. Central time. LGMV service tool app available to check ODU operating conditions.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This product is an efficient indoor unit, comprising a heat exchanger connected to LG VRF equipment. It uses two-stage, cascade, refrigerant-to-refrigerant and refrigerant-to-water heat exchanger(s) to provide hot water for different residential and commercial hydronic applications. Boasting a wide-entering water temperature range of 50° to 176°F and a leaving temperature range of 86° to 176°F, it is an ideal solution for domestic hot water heating, radiant floor heating, historic radiators, and more.
Warranty information: Standard limited liability warranty: 10-year parts and 10-year compressor warranty on qualified systems. LG Pro Dealers are eligible for an additional two-year parts and two-year compressor warranty for qualifying residential/light commercial systems, extending their standard limited liability warranty to 12 years for the parts and compressor.
Special installation requirements: Contractors must follow installation instructions in the applicable LG installation manual. HydroKit provides efficient hydronics with lower energy consumption, thanks to its simple installation, compact design, and easily accessible piping connections. It can be integrated into system control networks, requires little clearance space, and does not require exhaust piping.
Contact: LG Air Conditioning Technologies; www.lg.com
eProduct: 218
KHB055N, KHB085N, KHB110N, KHB155N, KHB199N, KHB285N
Serviceability features: The latest models of the KNIGHT boiler family feature improved ease of serviceability, thanks to a number of key technological advancements. Installers and technicians can rely on Lochinvar’s unique SMART SYSTEM controls to access key information for setup, troubleshooting, and monitoring critical equipment functions. A robust stainless steel heat exchanger is at the heart of this equipment, providing maximum reliability.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The KNIGHT floor mount boilers include six models, ranging from 55,000 to 285,000 Btuh. The ECM variable pump technology saves electricity and lowers operating costs. KNIGHT boilers are packaged with a variable-speed ECM circulator, which improves day-to-day operational efficiency and can save up to 90% on operational costs over a conventional circulator. Plus, with CON-X-US remote connect technology, customers can access the SMART SYSTEM controls to manage the unit.
Warranty information: Fifteen-year limited warranty on the heat exchanger and five-year limited coverage on all other parts.
Special installation requirements: Contractors can refer to the Installation and Operation Manual for details on installation requirements.
Contact: Lochinvar, 615-889-8900; www.lochinvar.com
eProduct: 219
Serviceability features: The Luxaire THF2 heat pump features a compact footprint, swing-out control box, field-installed TXVs, removable fan guard, and individually removable coil guards for easy and fast servicing.
Noise-reduction features: A thoughtful cabinet design isolates operating sounds, while upward airflow carries sound away to achieve a sound performance as low as 66 dBA.
IAQ equipment supported: THF2 heat pumps can be matched with one-piece or modular air handlers, as well as humidifiers and dehumidifiers, to enhance indoor air quality and optimize comfort. Air filters and ultraviolet air purifiers can further reduce airborne allergens, bacteria, and viruses.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Luxaire THF2 heat pumps are engineered for year-round comfort and energy efficiency. Units are designed to be matched with Luxaire indoor coils, furnaces, and air handlers to create a complete solution, including dual fuel heating. THF2 units are backed by the Good Housekeeping Seal, meet Energy Star/CEE Tier 1 efficiency requirements, and are optimized for tax credit eligibility up to $2,000 per year through the Inflation Reduction Act (U.S.).
Warranty information: With registration, THF2 heat pumps come with a 10-year compressor limited warranty.
Special installation requirements: A simplified installation process can be completed using conventional equipment and devices.
Contact: Johnson Controls, 414-344-8594; www.johnsoncontrols.com
eProduct: 220
Serviceability features: The Z9ES furnace features built-in, high-level self-diagnostics with fault code displays to streamline troubleshooting. Quarter-turn knobs simplify door removal while front-facing screws on the flame sensor and igniter provide easy access. Safety is enhanced with a 100% shut-off main gas valve and blower door safety switch.
Noise-reduction features: The Z9ES features a fully insulated cabinet that enhances thermal and acoustic performance. A dynamically balanced blower and motor assembly minimize sound. Variable-speed inducers and blowers maximize performance while minimizing sound. Variable-speed ECM fan motors provide quiet, efficient circulation.
IAQ equipment supported: External air filters provide maximum flexibility in meeting customers' IAQ needs. Optional system-matched humidifiers, dehumidifiers, germ-killing UVC lighting, and high-efficiency filtration through MERV 16 are available to provide a superior level of IAQ.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: At 96% AFUE, the Luxaire Z9ES have been designed for ease of installation and service, while providing efficient, high-performance heating with a compact footprint and flexible configuration. A high-efficiency blower motor reduces electrical usage, and an electronic hot surface ignition saves fuel costs, while increasing reliability. A sturdy aluminized-steel heat exchanger further enhances long-lasting performance.
Warranty information: Lifetime limited heat exchanger and 10-year parts limited warranties are available. A 10-year Complete Assurance limited warranty pledge states that if the heat exchanger fails within 10 years of installation, an optional furnace replacement is provided in lieu of heat exchanger replacement. To take advantage of this offer, customers must register online within 90 days.
Special installation requirements: This multi-positional unit can be installed in all positions with minimal conversion necessary. Simply rotate the inducer to the desired venting position, whether out the top, side, or bottom (internal downflow kit is available). Two identical units can be twinned by connecting a coupling wire. Installation is streamlined thanks to a compact 33-inch cabinet height, fold-up duct connector flanges, and easy access to controls. Electrical knockouts have been eliminated to further simplify the installation process.
Contact: Johnson Controls, 414-344-8594; www.johnsoncontrols.com
eProduct: 221
Serviceability features: The PSH1BG has hinged access panels provided to all controls and the compressor for easier access. The common suction service port allows contractors to read the suction pressure in all modes of operation without removing any panels. There is a removable top grille for easy service from the top without disconnecting fan motor leads. Side panels are also easily removed and replaced without removing the top grille.
Noise-reduction features: The PSH1BG has a sound rating as low as 58 dB, depending upon operating conditions. There is a compressor sound blanket that significantly reduces unwanted compressor noise and a discharge muffler that reduces compressor noise and vibration.
IAQ equipment supported: This system is compatible with any two-stage heating/cooling heat pump thermostat. When paired with a B64 air handler, this system utilizes dehumidification capabilities from the thermostat or duct-mounted humidistat.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This unit has a cooling range of 50°F to 125°F. It has an inverter-driven, Samsung, rotary compressor that provides five capacities in modulating operation from a two-stage thermostat. It provides additional energy savings in heating by defrosting only when necessary. There is a five minute delay before restarting when the unit shuts down, eliminating the highest cause for compressor failure.
Warranty information: Five-year limited parts and five-year compressor warranty out of the box. If registered within 90 days of installation, the limited parts and compressor warranties extend to 12 years. Additionally, after registration, the PSH1BG has a 12-year Dependability Promise to replace the entire unit with a like system if the compressor fails.
Special installation requirements: None
Contact: NGH, 800-422-4328; nortekhvac.com
eProduct: 222
Serviceability features: The PSH3BF has a removable top grille for ease of service from the top without disconnecting fan motor leads. It also has the common suction service port that allows contractors to read the suction pressure in all modes of operation without removing any panels. The panels to all controls and compressor are on the side of the unit for easy access. Side panels can be easily removed and replaced without removing the top grille.
Noise-reduction features: The PSH3BF has a sound rating as low as 73 db. It has the Quiet Plus Sound package that consists of a compressor sound blanket and a swept wing fan blade that significantly reduce unwanted noise. There is a composite base pan that absorbs sound, and a hot gas muffler that reduces compressor noise and vibration.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This unit has the Copeland Scroll two-stage compressor that operates at two different capacity points to provide superior comfort and efficiency. The unit is trimmed in a power-coated finish that passes 950 hours of salt spray per ASTM Std. B117. It has a five minute delay that keeps the unit from restarting when it shuts down, eliminating the highest cause for compressor failure. There's demand defrost that only defrosts when necessary, saving energy.
Warranty information: Five-year limited parts and five-year compressor warranty out of the box. If registered within 90 days of installation, the limited parts and compressor warranties extend to 12 years. Additionally, after registration, the PSH3BF has a 12-year Dependability Promise to replace the entire unit with a like system if the compressor fails.
Special installation requirements: None
Contact: NGH, 800-422-4328; nortekhvac.com
eProduct: 223
Max, Standard, and Advantage.
Serviceability features: An efficient, variable-speed, heat pump solution with individual control makes this system a perfect supplement for heating and cooling, saving on energy bills, while enhancing the comfort level of a specific space. Without the use of traditional ductwork, it can be easily and flexibly installed in various rooms without demolition, patching, or repainting. The product is also compatible with third-party ductless UV lights and ionizers and equipped with factory-installed cleanable filters.
Noise-reduction features: The High Wall Split has more comfort features than a ducted system, which yields a more comfortable and tailored indoor environment, including more precise temperature and humidity control, plus lower noise levels. The indoor quiet operation can reach as low as 20 dBA, with the outdoor quiet operation as low as 53.5 dBA.
IAQ equipment supported: The High Wall Split provides efficient heating and cooling powered by variable-speed technology, making indoor climate control more cost-effective with individual control and Midea’s exclusive energy-saving functions. The variable-speed technology guarantees fewer temperature swings and more stable comfort. The indoor humidity levels adjust in 5% increments (from 30% to 95%), and with a wide range of auto vertical and horizontal swings, it delivers cool and precise airflow to every corner of the room.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: With individual control, the High Wall Split provides more customized and targeted comfort than a traditional ducted system. It’s a perfect add-on to an uneven cooling or heating space, or to a space requiring extra comfort care. All of Midea’s High Wall Split systems are Energy Star certified and deliver 100% heating capacity at temperatures as low as 0°F, with smart functionality including auto-restart and refrigerant leak detection.
Warranty information: When the product is used in an owner-occupied residence, the original owner is entitled to a 10-year parts limited warranty upon timely registration. The warranty period becomes five years if the unit is not registered within 90 days. Owners in jurisdictions where warranty benefits cannot be conditioned on registration will automatically receive a 10-year parts limited warranty. For complete details, see the warranty certificate.
Special installation requirements: With the maximum refrigerant pipe length of 213 feet, and the maximum difference level of 98 feet, the unit can be installed effectively anywhere. The wide capacity range of the indoor unit (0.75 to 3 tons) meets the diverse needs of any room in a home. No ductwork is required – just a 3-inch hole in the wall, which allows the refrigerant pipe and electrical cable to enter the home, ensuring a flexible and hassle-free setup.
Contact: Midea America Corp., 502-595-8902; www.midea.com/us
eProduct: 224
Serviceability features: The MG2R can be vertically or horizontally vented using a two-pipe system for maximum flexibility in installation. There's a low voltage terminal board for easy field wiring, and an easy open pawl latch for easy removal for access. There are color-coded wire harnesses designed to fit the components, all with quick-connect fittings. There are also designated lights for flame signal strength to recognize states without counting flashes.
Noise-reduction features: The MG2R has clean and quiet operation due to the unique design of in-shot burners, location of inducer, and ease of installation.
IAQ equipment supported: The high-efficiency, downflow, gas furnace is designed for all manufactured housing applications.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: This unit has an innovative application of silicon nitride-type igniter. Utilizes proven Smartlite technology to extend igniter life. It has a multi-speed ECM blower designed to give a wide range of cooling capacities. Switches on PCB provide ultra-easy motor speed selection. A 40-VA transformer is included. There are diagnostic lights for easy troubleshooting without counting flashes.
Warranty information: The MG2R comes with an out-of-the-box one year limited parts warranty, one-year product assurance commitment, and 20-year heat exchanger warranty. If registered within 60 days of installation, the limited parts warranty extends to five years.
Special installation requirements: None
Contact: NGH, 800-422-4328; nortekhvac.com
eProduct: 225
Serviceability features: This dual fuel system helps homeowners achieve a more electrified, sustainably built environment by integrating heat pumps with gas furnace systems to reduce fossil fuel usage. This new solution is compatible with any thermostatically controlled gas furnace and works with both single-zone and multi-zone systems. Furnaces remain available to the homeowner as a heating source for extreme cold conditions.
Noise-reduction features: The indoor unit noise level is determined by a furnace’s blower system. The outdoor unit is as quiet as a normal conversation. The outdoor unit employs inverter-driven compressor technology, eliminating the excess sound associated with a conventional system’s start and stop cycle. Outdoor units also have an ECM, aerodynamically designed fan blades, and air channels to reduce noise, as well as insulation in key areas and more rigid material to reduce vibrational noises.
IAQ equipment supported: The intelli-HEAT system burns no gas, thus reducing greenhouse gas emissions inside homes. This is a key development, as exposure to pollutants from burning fossil fuels can have serious health impacts, including decreased lung function, headaches, dementia, increased blood pressure, respiratory, eye, skin irritation and much more. Switching to electric heating can help reduce these health risks.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The intelli-HEAT system provides cost-effective, efficient, and environmentally friendly cooling and heating all year round. Its versatile design optimizes variable-speed technology and smart controls, resulting in lowered utility bills, reduced GHG emissions, and a quieter outdoor environment while providing the perfect level of comfort indoors. Integrating cold-climate Hyper-Heating INVERTER (H2i) heat pump technology with existing furnaces, this dual fuel system provides all-electric heating down to -11°F, with 100% heating capacity down to 5° F.
Warranty information: Five-year parts and seven-year compressor to original owner. If system installed and registered within 90 days of installation, 10-year parts and compressor to original owner. If system installed by Diamond Contractor and registered within 90 days of installation, 12-year parts and compressor to original owner residing in the home.
Special installation requirements: Manufacturer did not specify.
Contact: Mitsubishi Electric Trane HVAC US; www.mitsubishicomfort.com
eProduct: 226
WSC43BA-KT
Serviceability features: All Napoleon gas furnaces include modular design and components to ensure that maintenance and service are incredibly easy. Napoleon's Premium Series heat pump comes with refrigerant, which means contractors only have to vacuum the line set between the outdoor unit and the furnace. No refrigerant charge required in the field to accommodate additional piping. Includes self-diagnostic system, which reduces troubleshooting.
Noise-reduction features: Air-source heat pump compressor includes a jacket to reduce potential vibration, creating the lowest noise level in the category. Smooth ramp up/down ensures the quietest operation of equipment.
IAQ equipment supported: UV-C air sanitization technology comes already installed in the Premium 9700 Series to stop pathogens and viruses from spreading through the home's air.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Hybrid Heating combines a cold climate, air-source heat pump and a furnace, using electricity and alternate fuel (natural gas or propane). The EQHub Smart Thermostat manages the system to provide optimal functionality based on selection of comfort, low-cost, quietness, or green, controllable through the EQHub or the Napoleon Home app. EQHub combines the advantages of both electric and gas systems, offering increased energy efficiency, cost savings, and greater flexibility in adapting to weather conditions.
Warranty information: The EQHub comes with a three-year limited warranty. Premium Series heat pump is 10-year parts and compressor limited warranty. Premium 9700 Series furnace includes 15-year unit replacement and lifetime heat exchanger limited warranty.
Special installation requirements: Complete the Hybrid Heating registration for homeowner's to receive their customized solution, maximizing the benefits of the EQHub and Napoleon Home app. www.napoleon.com/en/ca/heating-cooling/product-registration-eqhub-smart-thermostat
Contact: Napoleon, 705-721-1212; napoleon.com
eProduct: 227
Serviceability features: The NPF700 offers easy access for configuration and diagnostics via unit mounted interface. Its unique Setup Wizard walks the installer through simple setup and configuration steps when installing. Installers can set supply temperature and airflow directly from the interface. Service Wizard similarly steps through component verification to aid in troubleshooting. The panel provides alphanumeric readout related to diagnostics, alerts and reminders saved in non-volatile memory. Easily accessible flame rod design saves time during annual maintenance.
Noise-reduction features: The fully enclosed ultra-low NOx premix burner provides extremely quiet operation, eliminating the “jet engine” noise of traditional burners. The unit is designed to spend most of its time at drastically low firing rates down to 15% of maximum capacity, which provides whisper-quiet heating. The isolated hydronic heat exchanger design keeps combustion and any associated sound out of the airstream. A fully insulated cabinet with cleanable insulation minimizes sound and energy loss.
IAQ equipment supported: The NPF700 comes with terminal connections for all common IAQ accessories, including electronic air cleaners, dehumidifiers, and humidifiers. A 75-vac transformer provides ample power for UV lamps and other accessories when powered from the unit. The variable ECM motor provides design airflow up to 1-inch external static pressure, helping compensate for IAQ accessories and restrictive ductwork. Return air openings are designed to accommodate common filter box sizes.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The hydronic heat exchanger doesn’t overheat the air compared to standard forced air furnaces. The wide capacity range along with supply and return air sensors enable the unit to provide consistent register temperatures, preventing uncomfortable temperature swings. Duel-fuel compatible when paired with a heat pump. Ultra-low NOx burner, natural gas or propane, and high altitude operation for elevations up to 10,000 feet. Selectable airflow profiles make this furnace perfect for every environment.
Warranty information: Lifetime heat exchanger, 10-year parts, and one-year labor limited warranties to original owner in residential applications with prompt registration. Twenty-year heat exchanger, five-year parts, and one-year labor for non-registered furnaces. See warranty card for complete details and restrictions.
Special installation requirements: The unique hydronic system design offers many benefits and can be set up as manual fill or with a direct water line for make-up water. This provides application flexibility allowing the furnace to be installed in common locations. The manual fill option is designed to last more than one year before needing to be refilled, so it can easily be maintained during annual service.
Contact: Navien Inc.; navieninc.com
eProduct: 228
Serviceability features: The boiler’s durable, 316L austenite, stainless steel heat exchangers are highly corrosion-resistant, increasing the unit’s lifespan and ease of maintenance.
Noise-reduction features: There are no specific features just for noise reduction. Overall, the unit is quite quiet, with a sound level of 52 dB.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The NRCB can simultaneously provide domestic hot water and space heating, so users do not experience a reduction in one operation when the other is running. Its fully modulating premix burner has a nitrogen-oxide emissions level of only 14 parts per million, far exceeding the toughest standards.
Warranty information: Ten-year warranty on heat exchangers, five-year warranty on parts, and one-year reasonable labor.
Special installation requirements: There are no unique requirements, but this product is a Category IV appliance that can utilize either PVC, CPVC, or PP piping for venting. If replacing a noncondensing-type boiler, the venting system will have to be replaced.
Contact: Noritz America, 714-433-2905; noritz.com
eProduct: 229
Serviceability features: The J4PH4 has numerous features to make the installation and serviceability easier. Those include — but are not limited to — easy access panels to critical components, external service ports, blower motor with slide-out blower assembly, and removable top assembly.
Noise-reduction features: Oxbox high-efficiency compressors operate smoothly, quietly, and consistently. ECM fans where applicable operate quietly and efficiently.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts. Shares replacement parts with other models.
Additional features: Internal safeguards protect compressors against high pressure, low pressure, coil temperature, and power surge
Warranty information: The base warranty includes: one-year complete unit replacement warranty (applicable in residential applications if the compressor, coil, or heat exchanger fails in the first year, per the limited warranty terms); five-year standard parts warranty; 10-year compressor replacement; and 20-year heat exchangers for gas furnace and package gas electric units. Registered extended warranty available. Once Oxbox equipment is registered for extended warranty, it includes 10 year warranty on parts. Warranty stays with the equipment.
Special installation requirements: Oxbox is designed for easy installation. There are no special installation requirements.
Contact: Oxbox; oxboxhvac.com
eProduct: 230
With performance up to 15.2 SEER2.
Serviceability features: This heat pump allows for quick access to the control panel allows for easy install, troubleshooting, and maintenance. Its galvanized steel cabinets resist rust and stand up to weather.
Noise-reduction features: Oxbox units operate smoothly, quietly, efficiently, and consistently. This model operates with a maximum sound level of 76 decibels.
IAQ equipment supported: The majority of 24-V IAQ equipment is compatible with Oxbox equipment.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The J4HP5 heat pump achieves 14.3 SEER2 when it is matched with an Oxbox air handler. The same outdoor unit can achieve 15.2 SEER2 when it is matched with a high efficiency (ECM) air handler.
Warranty information: The base warranty includes: one-year complete unit replacement warranty (applicable in residential applications if the compressor, coil, or heat exchanger fails in the first year); five-year standard parts warranty; 10-year compressor replacement; and 20-year heat exchangers for gas furnace and package gas electric units (non-registered warranty). Registered extended warranty available. Registered equipment for extended warranty includes 10-year warranty on parts. Warranty stays with the equipment.
Special installation requirements: Oxbox is designed for easy installation. There are no special installation requirements.
Contact: Oxbox; oxboxhvac.com
eProduct: 231
Serviceability features: The PureFire boiler features two removeable side panels for easy access and efficient serviceability. The control uses plain-English programming language for system setup.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: A unique condensate system with built-in neutralizer component and float switch protection is a top feature. Other features include high-grade stainless steel burner and heat exchanger and 120-V convenience outlet and LoNOx operation. The fully modulating burner ensures dependable operation and maximum efficiency. Boilers are equipped with a state-of-the-art control board that offers outdoor reset control with an additional outdoor temperature sensor and is cascade capable for operation of up to 16 units as a single module.
Warranty information: The PureFire boiler includes a full one-year warranty. A five-year parts and one-year labor warranty is also provided (labor coverage starting on day 91) if the boiler is fully registered within one year of installation. In addition, the heat exchanger is covered by a 12-year limited warranty.
Special installation requirements: Manufacturer did not specify.
Contact: PB Heat LLC/Peerless Boilers, 610-845-6213; www.peerlessboilers.com
eProduct: 232
Serviceability features: RP18AZ heat pump is Energy Star certified, offering one of the highest efficiencies available. PlusOne diagnostics offers Bluetooth technology, which aids in quick and easy service. PlusOne expanded valve space provides a minimum working area of 27 square inches. PlusOne triple service access provides 15 inch-wide corner service access, two-fastener removable corner, and easily removable individual louver panels. Brushless DC condenser motors enhance reliability and allow for easier serviceability.
Noise-reduction features: The swept wing fan technology allows for quieter operation and improved unit acoustics. Designed with comfort in mind, the unit features sound-dampening attributes like refrigerant tubing design, fan blade approach, composite base pan, and innovative compressor and drive technologies to ensure as efficiency increases, sound levels stay low. With a sound rating as low as 58 dB the RP18AZ delivers a quiet and comfortable home.
IAQ equipment supported: Rheem offers IAQ products such as air cleaners, air filters, UV devices, and humidifiers that may be used with this system. IAQ products are available through the Rheem Parts Division.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: RP18AZ is highly efficient with inverter-driven, variable-speed compressor technology, which promotes cooling operation between 40% and 100% of capacity (with overdrive capability up to 115% in extreme conditions) to meet the ever-changing heating and cooling needs. The unit provides precise temperature control, advanced humidity control, and greater efficiency. This product family has system combinations eligible for the IRA Energy Efficient Home Improvement (25C) tax credit and High Efficiency Electric Home Rebate Program.
Warranty information: Rheem furnishes a replacement for any part of this product that fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty. Ten-year conditional unit replacement (registration required) and 10-year parts.
Special installation requirements: Split-system heat pumps must be matched with appropriate coil components to meet Energy Star. Factory-supplied filter drier must be installed. For reliable operation, unit should be level in all horizontal planes. Use only copper wire for electric connections at unit. Aluminum and clad aluminum are not acceptable for the type of connector provided. Minimum outdoor operation air temperature for cooling mode without low-ambient operation accessory is 55°F. Maximum outdoor operating air temperature is 125°F.
Contact: Rheem, 984-833-8327; www.rheem.com
eProduct: 233
Serviceability features: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: As the brands’ newest offering, the RunTru and Ameristar 15.2 SEER2, side-discharge heat pump systems are the brands’ first side-discharge options, providing the compact size and installation flexibility that dealers, distributors, and homebuilders need. The units are also the brands’ first inverter-driven heat pumps, delivering energy savings and increased indoor comfort for customers at an affordable price point.
Warranty information: Registered warranty includes 10-year parts and compressor coverage.
Special installation requirements: Manufacturer did not specify.
Contact: RunTru, 877-374-2098; https://runtruhvac.com
eProduct: 234
Line Achiever ultra-low NOx gas furnace, R951V ULN.
Serviceability features: This furnace boasts simplified install and service. Equipped with Bluetooth technology and a contractor app, R951V ULN interacts with contractors and homeowners for setup, service, and diagnostics without the need to remove service panels from the unit. Information available through the Bluetooth app aids in quick and easy service and includes service information, parts list, installation instructions, as well as links to all furnace data.
Noise-reduction features: With quieter sound rankings, the R951V ULN guarantees cozy and quiet vibes. The fully insulated blower cabinet, solid bottom, and truly variable-speed airflow technology make this furnace one of the quieter options available.
IAQ equipment supported: The R951V ULN supports IAQ with its 24-V humidifier connection, as well as standard filters.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The R951V ULN delivers high-efficiency heating and unique features, including PlusOne energy efficiency (95% AFUE); PlusOne diagnostics with Bluetooth technology; PlusOne Ignition System with direct spark ignition (DSI) for reliability and longevity; and PlusOne Water Management System that includes a Ruud-patented sensor that shuts off the furnace if a blocked drain is detected. This Energy Star-certified unit offers up to $85 in annual energy cost savings (per energystar.gov when compared to a standard 80% gas furnace).
Warranty information: Ruud will furnish a replacement for any part of this product that fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty. Ten-year conditional parts (registration required) and limited lifetime heat exchanger.
Special installation requirements: Requires smart phone with Bluetooth connectivity and Ruud Contractor app. The unit has DIP switch-free installation commissioning via Bluetooth technology, which means seamless final install step without DIP switch configuration using the Ruud Contractor app. This furnace is to be installed for propane firing only in air districts requiring 14 ng/J NOx emission limits.
Contact: Rheem, 800-621-5622; www.ruud.com
eProduct: 235
AC060BXUPCH/AA
Serviceability features: Hylex units are universal, inverter-driven heat pumps that serve as a direct replacement for a traditional cooling-only or heat pump unitary outdoor unit (ODU). This product is compatible with existing HVAC equipment (e.g., air handler, ductwork, copper pipe, thermostat, and wiring), thus no additional equipment will need to be purchased. Replacing an existing ODU with a Hylex unit reduces installation time for contractors.
Noise-reduction features: Variable-speed fan motors, specially engineered fan blades, and acoustically designed compressors reduce sound levels as low as 50 dBA, compared to 68 dBA or more for traditional unitary equipment. This makes the Hylex unit ideal for zero-lot-line, sound-sensitive applications.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: Maintains 100% heating performance down to 5°F. Fan control during defrost. Two-wire heat pump connection and indoor unit fan speed control.
Warranty information: Registration required within 60 days of installation to secure the enhanced warranty. Without product registration, the systems will default to the standard warranty. Warranty terms vary by product. Standard warranty includes five-year parts and seven-year compressor. Enhanced warranty includes 10-year parts and 10-year compressor.
Special installation requirements: Manufacturer did not specify.
Contact: Samsung HVAC; samsunghvac.com
eProduct: 236
Serviceability features: Self-configuring communicating control makes system installation easy. Direct-vent (two-pipe), single-pipe venting, or combustion air venting for application flexibility. Slide-out heat exchanger and blower assembly for ease of service. These gas furnaces feature large, robust, one-quarter turn knobs for easy door removal and secure attachment.
Noise-reduction features: These furnaces include a two-speed, induced draft, combustion blower and variable-speed, constant airflow, ECM blower motor to reduce operating sound levels. The blower motor is attached with soft-mount rubber grommets that absorb sound and vibration. Furnaces feature insulated heat exchanger and blower compartments to muffle sound and absorb vibration noise.
IAQ equipment supported: When coupled with a Tempstar Ion System Control, the F96CTN provides longer heating and cooling cycles at lower fan speeds for a more consistent temperature throughout the home. Intuitive prompts allow homeowners to program everything from humidity levels to fan speeds, giving them the ultimate control over their home comfort.
Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring functions available only when used with the Tempstar Ion System Control.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: F96CTN Ion 96 furnaces are built with stainless steel secondary heat exchangers. Two-stage heat and variable-speed cooling compatible, this furnace is equipped with a variable-speed, constant airflow, ECM blower motor for extra SEER with select cooling equipment and consistent comfort. Designed for four-way multi-position installation with 12 different vent options. Meets 40 ng/J low NOx emissions and <2% cabinet air leakage per ashrae standard 193.< p>
Warranty information: Ten-year No Hassle Replacement limited warranty. (If heat exchanger fails due to defect during applicable limited warranty time period, one-time replacement with comparable unit will be provided.) Lifetime heat exchanger and 10-year parts limited warranty to original purchaser with timely registration. Limited warranty is 20-year heat exchanger and five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details/restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.tempstar.com
eProduct: 237
2%>
Serviceability features: When paired with the Ion System Control with Wi-Fi capability, the T4H7T heat pump provides remote system control, self-configuring capabilities, and text-based diagnostics. An innovative control box design, external high and low refrigerant service ports, and quick-access service valves make the T4H7T easy to install and service.
Noise-reduction features: The T4H7T heat pump delivers reliable heating and cooling using a two-stage scroll compressor that operates mostly in a quieter (as low as 69 decibels) and more efficient low stage. All units include compressor sound jackets for minimal noise.
IAQ equipment supported: Compatible with most industry IAQ offerings.
Thermostat compatibility: Compatible with most thermostats. Communicating and self-configuring functions only available when used with the Tempstar Ion System Control.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the T4H7T heat pump achieves efficiencies up to 8.1 HSPF2/17 SEER2/13 EER2. This two-stage heat pump is Energy Star qualified. It provides improved temperature and humidity control with its efficient scroll compressor.
Warranty information: Ten-year No Hassle Replacement limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Limited warranty is five-year parts if not registered within 90 days of installation. Registration not required in jurisdictions where warranty benefits cannot be conditioned on registration. See warranty certificate for details/restrictions.
Special installation requirements: None.
Contact: International Comfort Products, 463-245-4015; www.tempstar.com
eProduct: 238
With Link technology.
Serviceability features: The XV20 heat pump features Trane Link, a revolutionary technology that simplifies the installation, commissioning, and remote monitoring of variable-speed HVAC systems. Created to provide technicians with a plug and play experience, it assists with installation accuracy through automated configuration, charging, and system testing, and it works with remote monitoring to provide quicker solutions and more efficient service calls. Link provides the exact data technicians need for installation and troubleshooting on their own smart device.
Noise-reduction features: Noise levels of 54 to 76 dBA.
IAQ equipment supported: Works in conjunction with the Trane CleanEffects Whole Home Air Cleaner to remove 99.89% of airborne pollutants – including dust mites, smoke, pet dander, and viruses.
Thermostat compatibility: Requires a special thermostat.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: The new Trane XV 20, as well as the XV 18, have been developed for an all-new lineup of Trane Link communicating equipment available nationwide. These models have dual capability to operate with all existing ComfortLink II variable-speed indoor equipment and controls, as well as future Trane Link air handlers and smart thermostat.
Warranty information: Limited warranty, registered: 12-year compressor and 10-year coil and functional parts. Non-registered: five-year compressor and five-year coil and functional parts.
Special installation requirements: Manufacturer did not specify.
Contact: Trane, 855-456-6671; trane.com/residential
eProduct: 239
Serviceability features: The ECO Tec Series 2 is designed for easy maintenance and service of common parts. Its internal components are strategically positioned for easy access, and its removable control terminal blocks save time when making electrical connections by eliminating potential field wiring issues. A durable stainless steel fire tube heat exchanger features a vertical orientation for self-rinsing during operation, and a polypropylene condensate-collector base provides better corrosion resistance than traditional stainless steel to ensure long service life.
Noise-reduction features: A smartly designed sealed cabinet provides whisper-quiet operation. An insulated heat exchanger and DHW pipes reduce heat loss and noise, while a sound-suppressing air silencer on the heat exchanger suppresses potential nuisance tones.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The ECO Tec Series 2 includes built-in zone control, connects up to four thermostat inputs, and features an integrated control software that allows for multiple boiler configurations without needing a third-party control component. Another defining feature is its compatibility with the Weil-McLain ProTools app via Bluetooth, which allows contractors to view operational logs that provide trending data for monitoring performance and information for potential fault codes.
Warranty information: All units are tested and certified to the industry’s highest standards and include a warranty of up to 12 years on the heat exchanger and up to five years on parts with registration (two years on parts without registration).
Special installation requirements: The sleek, modern design makes it easy to install and offers versatile placement options. Its wall-mount design frees up valuable floor space, while its optional pedestal can be used for floor-standing installations. With an optional multi-boiler wiring kit, users can connect and operate up to eight ECO Tec Series 2 boilers simultaneously. This also means there’s no need to add expensive external sequencing control software to initiate, interrupt or terminate boiler commands.
Contact: Weil-McLain, 312-565-4617; www.weil-mclain.com
eProduct: 240
Serviceability features: The Y91E furnace features built-in, high-level self-diagnostics with fault code displays to streamline troubleshooting. Quarter-turn knobs simplify door removal, while front-facing screws on the flame sensor and igniter provide easy access. Safety is enhanced with a 100% shut-off main gas valve and blower door safety switch.
Noise-reduction features: The Y91E features a fully insulated cabinet that enhances thermal and acoustic performance. A dynamically balanced blower and motor assembly minimize sound. Variable-speed inducers and blowers maximize performance while minimizing sound. Variable-speed ECM fan motors provide quiet, efficient circulation.
IAQ equipment supported: The Y91E uses external air filters to provide maximum flexibility in meeting customers' IAQ needs. Optional system-matched humidifiers, dehumidifiers, germ-killing UVC lighting, and high-efficiency filtration through MERV 16 are available to provide a superior level of IAQ.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: At 96% AFUE, the YORK Y91E has been designed for ease of installation and service while providing efficient, high-performance heating with a compact footprint and flexible configuration. A high-efficiency blower motor reduces electrical usage, and an electronic hot surface ignition saves fuel costs, while increasing reliability. A sturdy aluminized-steel heat exchanger further enhances long-lasting performance.
Warranty information: Lifetime limited heat exchanger and 10-year parts limited warranties are available. A 10-year Complete Assurance limited warranty pledge states that if the heat exchanger fails within 10 years of installation, an optional furnace replacement is provided in lieu of heat exchanger replacement. To take advantage of this offer, customers must register online within 90 days.
Special installation requirements: This multi-positional unit can be installed in all positions with minimal conversion necessary. Simply rotate the inducer to the desired venting position, whether out the top, side, or bottom (internal downflow kit is available). Two identical units can be twinned by connecting a coupling wire. Installation is streamlined thanks to a compact 33-inch cabinet height, fold-up duct connector flanges, and easy access to controls. Electrical knockouts have been eliminated to further simplify the installation process.
Contact: Johnson Controls, 414-344-8594; www.johnsoncontrols.com
eProduct: 241
Serviceability features: The YH2F heat pump features a compact footprint, swing-out control box, field-installed TXVs, removable fan guard, and individually removable coil guards for easy and fast servicing.
Noise-reduction features: A thoughtful cabinet design isolates operating sounds, while upward airflow carries sound away to achieve a sound performance as low as 66 dBA.
IAQ equipment supported: YH2F heat pumps can be matched with one-piece or modular air handlers, as well as humidifiers and dehumidifiers to enhance indoor air quality and optimize comfort. Air filters and ultraviolet air purifiers can further reduce airborne allergens, bacteria, and viruses.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared parts and some unique parts.
Additional features: YH2F heat pumps are engineered for year-round comfort and energy efficiency. Units are designed to be matched with YORK indoor coils, furnaces, and air handlers to create a complete solution, including dual fuel heating. YH2F units are backed by the Good Housekeeping Seal, meet Energy Star/CEE Tier 1 efficiency requirements, and are optimized for tax credit eligibility up to $2,000 per year through the Inflation Reduction Act (U.S.).
Warranty information: With registration, YH2F heat pumps come with a 10-year compressor limited warranty.
Special installation requirements: A simplified installation process can be completed using conventional equipment and devices.
Contact: Johnson Controls, 414-344-8594; www.johnsoncontrols.com
eProduct: 242
Report Abusive Comment