The FlameGard® brand Quick-Tite™ adapters and hole plugs are designed for commercial kitchen exhaust systems. They prevent grease and other liquids from infiltrating through the metal walls of cooking hoods or ducts, providing a hassle-free accommodation for fire suppression systems. The adapters are manufactured of solid, machined steel for strength and high-temperature tolerance and to provide structural support for any piping system. Internal pipe threads come with the adapters to permit easy pipe coupling at the point of penetration. If an existing penetration or hole in a cooking hood or duct is no longer needed, the hole plugs are designed to provide an attractive, positive seal to match the existing adapters. Available in eight standard hole sizes, the adapters are pressure tested to 5,000 psi. They are supplied with a chrome-plated finish to maximize corrosion resistance and leave an attractive appearance. The hole plugs are easy to install and are available in five standard hole sizes: 3/4, 7/8, 1-1/8, 1-3/8, and 1-5/8 inches. They can be used for changes to a duct system such as installation of a new fire protection system or nozzle, covering a hole drilled in the wrong location, or repairing a duct with previously drilled holes.
Component Hardware Group® Inc., 1890 Swarthmore Ave., P.O. Box 2020, Lakewood, NJ 08701; 800-526-3694; 732-364-8110 (fax); email@example.com; www.flamegardusa.com