The AEGIS SGR Bearing Protection Ring™ can now be installed quickly and easily with conductive epoxy. For motors controlled by variable-frequency drives (VFDs), the ring channels harmful motor-shaft currents away from bearings and safely to ground, protecting them and extending their lives. Installing the SGR with conductive epoxy takes only minutes and eliminates the need to mark and drill holes in the motor’s end bell. The motor shaft and end bell must be clean and free of any coatings, paint, or other conductive material. The installer simply applies the adhesive to the back side of the SGR, centers the SGR around the motor shaft, and holds the ring in place to allow the adhesive to set. Units are guaranteed for one year from the date of purchase against defective materials and workmanship.
Electro Static Technology, 31 Winterbrook Rd., Mechanic Falls, ME 04256; 866-738-1857 or 207-998-5140; 207-998-5143 (fax); email@example.com; www.est-aegis.com