2016 AHR Expo
Photos from the 2016 AHR Expo at the Orange County Convention Center in Orlando, Florida. Posted: February 17, 2016.
2016 AHR Expo
Mel Carrier (left), assistant brand manager, hilmor, a brand of Newell Rubbermaid, demonstrates one of hilmor's newest tools to J&K Sales representatives Dan Dusseault (middle) and Jeff Young (right).
2016 AHR Expo
David Say, a rep with Haier America, points out the Wi-Fi capabilities on the company’s new Arctic Series inverter technology heat pumps. The system keeps 100 percent heating capacity at 5°F and provides warm air at minus 15°.
2016 AHR Expo
Dave Brown, sales engineer, BBC Pump & Equipment Co. Inc. in Indianapolis, tests out the functionality of Grundfos' Control HVAC for variable-primary-flow systems.
2016 AHR Expo
Randy Alvis (left), rep with Johnson Controls Inc., demonstrates the capabilities of the manufacturer's Facility Explorer® Building Automation System to Winston Steele (right), technical managing director, WR Steele Refrigeration & Air Conditioning, Stone Mountain, Georgia.
2016 AHR Expo
Bill Colglazier (left), director of new business development at Webstone Co. Inc., discusses the company's latest valves and components with Andy Morrow (right), product manager at Heatlink Group Inc.
2016 AHR Expo
Daniel Lapin (left), vice president, Lapin Sheet Metal in Orlando, Florida, experiences the ease and simplicity required to cut a piece of DuroDyne Flexible Duct Connector using one of the company's manual cutting machines while Dave May (right), sales rep at DuroDyne Corp., looks on.
2016 AHR Expo
Toffee Coleman, education partnership program manager, Fluke Corp., declares the AHR Expo floor is heating up, with the help of a Fluke TiS60 thermal imager.
2016 AHR Expo
Giovanni Barletta, a rep with Emerson Climate Technologies’ flow controls division, leads one of many Emerson interactive seminars. This particular session was presented on behalf of the event’s international visitors.
2016 AHR Expo
James Suer, market manager, Milwaukee Electric Tool Corp., powers through a piece of stock with the company’s M18 FUEL™ SUPER HAWG™ Right Angle Drill w/ QUIK-LOK™.
2016 AHR Expo
Ed Cunningham, a rep with Mestek Machinery, activates the company’s Oval-Max Roller 4, which can produce round and oval fittings on material up to 20 gauge and up to 40 inches wide.
2016 AHR Expo
Remember when men made of sheet metal used to be so simplistic? That certainly isnât the case anymore.
2016 AHR Expo
David Fostervold, spare parts and portable power tools rep, Trumpf Tools, fastens together two pieces of sheet metal using one of the company’s many Tru Tool fasteners.