The York® Hybrid Comfort System, a dual-fuel system, offers homeowners the opportunity to switch between two methods of home heating, using whichever method is the most efficient and cost-effective.
IdealSeal 777 is a high-performance, multilayer, total vapor barrier aluminum foil insulation laminate. The laminate covers and protects ductwork and piping insulation under a wide range of interior and exterior conditions. It has high-puncture resistance and, according to the company, extraordinary tear strength.
LoadMatch® thermostats are a new line of thermostats designed specifically for use with the LoadMatch single-pipe heating-cooling system. The thermostats provide control of the systems employing either heat pump or fan coil units.
The Traceable® humidity-temperature pen continuously and simultaneously displays both rh and °F/°C with dual-recall memories. The memory displays highest and lowest humidity and temperature readings achieved overnight or during any time period.
The SRL2 infrared refrigerant leak detector has both a visual and audible alarm when a CFC, HFC, HCFC or a blended refrigerant leak is detected. Three sensitivity levels adjust between low (1.0 ounce per year and higher), medium (0.5 ounces per year and higher), and high (0.1 ounces per year and higher).
The VLT® Micro Drive is a general-purpose variable-frequency drive designed for rugged, reliable, plug-and-play control of ac motors up to 3 hp. To use, connect the motor and power cables, turn the control knob, and watch the motor speed change.
A 40-page product catalog features the company’s ventilation equipment product lines. Product categories include fans and ventilators, centrifugal and vane axial fans, laboratory exhaust systems, dampers, louvers, kitchen ventilation systems, energy recovery ventilators, and make-up air units.
The HT-748 humidity and temperature transmitter is designed for rugged applications up to 300°F (150°C) where a small (5/16-inch diameter) stainless steel probe is required. The sensor offers a 0-1 vdc output corresponding to 0-100 percent rh, as well as separate 0-1 vdc temperature signal.
The AirShare™ room-to-room ventilator moves air to rooms that are too hot or cold. The design moves air through the wall cavity from room to room. The intake or diffuser can be mounted high or low for greater comfort and destratification.
The Combat® IDF-Series indirect-fired air-handling units are designed for commercial and industrial applications. Features include contaminant-free discharge air, three- or four-pass heat exchanger design, and modular design.
RSS