"We will see a dramatic increase in the very near future in the green design strategies architects use to design buildings," said Phil Bernstein, FAIA, LEED AP, vice president of Autodesk Building Solutions Division. "Architects and designers will need to be increasingly familiar with materials research, energy and atmosphere management alternatives, and design software tools that facilitate these new green design practices using building information models (BIM)."
Incorporating high-efficiency HVAC systems was found to be the most common element of green building design today, with greater than 50 percent of the study's architects specifying use on more than half of their projects over the past year. Sixty-seven percent of the architects responding to the survey used design software to maximize solar lighting, and approximately 64 percent used retention basins.
More than half of architects used design software to predict and evaluate HVAC operating costs in the past year with one third of these architects using this software on more than half of their projects. Other elements and practices identified as important to incorporate into green buildings include monitoring devices for lighting, heating and cooling, evaluation of building materials to maximize energy performance and minimize environmental impact, use of design software to do energy modeling/baseline analysis, use of salvaged, refurbished, or reused building materials products, maximization of interior solar lighting, and prediction and evaluation of the environmental impact and lifecycle of building materials.
Some practices that are uncommon today, such as green roofs and on-site renewable energy, are expected to increase significantly over the next five years. The use of renewable on-site energy is expected to increase over 200 percent in the next five years, with use of vegetated or green roof covers increasing by 167 percent.
The study's architects believe that the greatest impetus for the adoption of green initiatives will come from higher energy costs for heating, cooling and lighting.
This Internet survey was conducted in October 2005 among architects practicing in the United States. Of the architects who responded to the survey, 54 percent are predominantly involved in commercial projects. The rest are involved with single-family homes (24 percent), institutional (19 percent), or industrial projects (4 percent).
The full survey is available at http://images.autodesk.com/adsk/files/Autodesk_Green_Index_Report.pdf.
Publication date: 11/21/2005