The UEK1 Hydraulic Swage Tool makes swaging of soft-drawn tubing a hassle-free process. The design of this expander tool will allow technicians to quickly swage a piece of tubing with just one hand.
This line features two separate tool platforms: The inline battery pressing tool (INLNPRESS-TOOL19kN) and the pistol-grip battery-powered pressing tool (PSTLPRESS-TOOL32KN). Both tools quickly press watertight connections in 3-4 seconds.
This control solution for Carel ExV proportional electronic expansion valves can be installed directly on the evaporator, in cold rooms, and other applications with a design intended specifically for low temperature conditions.
This Internet of Things (IoT) and Wi-Fi-enabled smart condensate neutralizer is able to convert any water heater or boiler into a smart device, which ensures users never run the risk of acidic corrosion in drains and pipes. telliBot comes with robotic sensors that can remotely monitor water temperatures and warn users if there is any water leakage on the floor.
The OPTIMISER 10 is an easy-to-use resource for original equipment engineers to specify the most efficient, tailor-made Multi-Wing fan for their applications.
The Green Tech Line of refrigeration and air conditioning components is designed for use with natural refrigerants R-290 (propane), R-600a (isobutane), and R-744 (CO2). These high-quality, hydrocarbon (HC) and CO2-ready system components include valves, controllers, transducers, filter driers, and microchannel heat exchangers.
These units feature a 70°F floating head pressure control valve and an integral subcooling circuit that allows saturated liquid to flow from the receiver to the condenser where the refrigerant is sub-cooled by ambient air.
This flush cutter is an ergonomic hand tool that employs bypass cutting technology to produce a clean, square cut on soft wire up to 16 AWG (1.29 mm) with minimal squeezing.
This stainless steel solenoid valve is ideal for ammonia, but can also control CO2, fluorinated refrigerants, glycols, pure water, light oils, and other approved liquids.
V-II 230V/3-phase, zoned variable refrigerant flow (VRF) systems offer large capacity and operational efficiencies up to 24.30 IEER to Air-Conditioning, Heating, and Refrigeration Institute (AHRI) 1230 standard and are ideal heating/cooling solutions for small and large buildings.
RSS
