January 24, 2011
The newest product innovation in the ventilation industry - the modular/field-adjustable (M/FA) fabric duct/diffuser system - promises air distribution installation time reductions of as much as 40 to 80 percent and 15 to 50 percent less material costs, depending on marketplace geography.Read More
January 10, 2011
Thermography uses an infrared camera (thermal imager) to capture two-dimensional representations of the surface temperatures of parts of buildings. Often, those images reveal temperatures or temperature differences that indicate conditions contributing to the waste of heated or cooled air and, as a result, needlessly excessive energy costs.Read More
December 20, 2010
Desiccant dehumidification is a cost-effective and energy efficient option to reduce a supermarkets’ moisture load to lower energy costs, ensure food safety and customer comfort, and provide the proper amount of fresh outdoor air at the precise temperature and humidity necessary for the space.
December 6, 2010
A basic HVAC system shows the application of the Second Law of Thermodynamics. The compressor adds energy to the refrigerant, and it becomes hot, just the way a hand operated tire pump does. Since the compressed refrigerant is hotter than the air blowing across the condenser, the heat will flow to the cooler air. This is a transfer of heat energy out of the refrigerant.
November 22, 2010
Thermodynamics, as with most concepts in science and physics, is most accurately described using mathematical equations. However, simple explanations, although not perfectly accurate, are sufficient to convey the information needed to understand everyday experiences. This article is an attempt to simplify these concepts.
November 8, 2010
Transpired solar air collector technology, developed at the U.S. Department of Energy’s (DOE’s) National Renewable Energy Laboratory (NREL) back in the 1990s, recently found its way back home and is now an integral part of the comfort heating system of the new Research Support Facility (RSF).
October 18, 2010
People sometimes ask if there are wear differences due to the raw edge design of the notched V-belt vs. the fabric all over design of the classical wrapped V-belt. The fact is many factors can contribute to sheave wear. However, notched V-belts and wrapped V-belts have virtually identical sheave wear characteristics.
October 4, 2010
It is possible to ensure high-quality brazing connections in a safe and environmentally friendly way? Yes it is, with mixed oxyhydrogen gas generators. This technology works only with water and electricity. Gas is generated through a particular electrolytic cell, able to get H2-O2 from the water.
September 20, 2010
economic and indoor environmental concerns require HVAC innovation. New liquid desiccant air conditioning systems offer
substantial energy savings and greatly improved humidity control in
applications where latent loads (moisture) are very high relative to sensible
loads. Read More
September 6, 2010
Moisture in building envelopes can have serious consequences. For example, moisture in insulation reduces its insulating capability, causing heating and/or cooling losses and wasting energy. Moisture can also cause structural deterioration and foster mold growth. Thermal imaging is well suited to identifying wet spots.