Patent-pending Qwik System Flush™ is an HVACR biodegradable refrigeration and air conditioning equipment flush. According to the company, it is nontoxic, nonflammable, and effective for removing system-damaging residual oil, moisture, and acid. The flush leaves no residue if a system is properly evacuated down to 25 inches of mercury.
The Ultra-Fuels Model JDI-VII is a heat pump control designed for any heat pump application, which includes total electric and dual-fuel, single-stage applications. According to the manufacturer, it performs the same job as a typical heat pump thermostat. The control uses only four wires, RWYC, to a single-stage heat-cool thermostat.
The LiftPod portable personal lift combines the portability of a ladder with the stability of a work platform. With an enclosed platform and a 14-foot working height, the lift allows workers to move within the basket, hands-free, contributing to increased safety. The platform contains a work tray to carry tools and materials.
The Turbo Torch® Viper line includes five brazing rod alloys, five solders, four high silver alloys, three fluxes, and an aluminum repair kit. The brazing alloys are ideal for joining copper to copper and are self-fluxing in this application. The soldering flux paste is a water soluble, nontoxic flux for use on copper, brass, tin, silver, galvanized iron, lead, mild steel, zinc, and malleable iron.
The OAFE-1500 is an AMCA-certified outdoor airflow measurement system with ±0.5 percent accuracy through the velocity range of 200-1,200 fpm and ±5 percent at 100 fpm. The airflow measurement station consists of multiple airflow elements, factory mounted and pre-piped in a casing.
The Micro CG-100™ combustible gas sniffer quickly and accurately detects gas leakage including low levels of methane (including natural gas), propane, butane, ammonia, and many other combustible gases. With the Tri-Mode Detection™ feature, an operator is alerted to the presence of combustible gas.
Model SRH relative humidity sensor series product line is designed to measure relative humidity in a room, duct, or outside and is available in accuracies of ±2, ±3, and ±5 percent. The units capacitive sensor technology is capable of full-scale 0 percent to 100 percent relative humidity measurement.
MyTemp™ delivers both energy savings and improved comfort by providing room-by-room temperature control for residential forced-air HVAC systems. It monitors the temperature in every room, even bathrooms, and individually controls the airflow to every vent, says the company.
The 30/30® is a high-efficiency panel filter designed as a strong, value-added upgrade from ordinary MERV 8s, says the company. It has a very low initial resistance, and a low maintained resistance, to airflow. The radial pleat design allows full use of the media for maximum dust-holding capacity.
Ray™ is a high-efficiency, low-mass fully condensing cast iron boiler. The residential unit can run on either natural gas or propane; no conversion kit is required. It delivers 40,000-199,000 Btuh at 92.7 percent AFUE. The boiler utilizes SmartCycle™ technology.