Advanced Distributor Products

Model: F, P Series air handler

Footprint (inches): 36 (h) by 22 (d) by 15 (w) to 48 (h) by 26 (d) by 22 (w)

Serviceability features: Several time-saving, contractor-friendly serviceability features, including durable cabinet design and independent, easy-to-remove access panels. In addition, the multiposition unit is reinforced with coil-stabilizing brackets for horizontal applications. ETL-certified cabinet design reduces air leakage to 2 percent or less.

Technical support: Available at 866-303-8634, Monday through Friday from 8 a.m. to 4 p.m. Eastern time.

Technical support materials: Product brochure, engineering and spec guide, installation instructions, warranty, TXV installation instructions, and wiring diagrams.

Noise-reduction features: 5/8-inch foil-faced insulation and dynamically balanced blower wheels reduce noise in the unit.

IAQ equipment supported: UV lights; antimicrobial drain pans with Microban® protection help reduce mold and mildew growth.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares motors and coils with other lines.

Additional features: A compact, 13 SEER solution offers several time-saving, contractor-friendly features.

Warranty information: Five-year limited.

Special installation requirements: None.

Contact: Advanced Distributor Products, Stone Mountain, Ga.; attn: Christine Tucker, 770-465-5569; 770-465-5599 (fax); christine.tucker@adpnow.com; www.adpnow.com.

eProduct 151

Model: R Series air handler

Footprint (inches): 47 (h) by 22 (d) by 19 (w) to 60 (h) by 26 (d) by 21 (w)

Serviceability features: Designed to reduce service time and cost, the R Series features brackets that secure the coil assembly for horizontal installation. Three independent panels allow for easy access to the slide-out control board, blower and coil assemblies. A single-point connection kit means only one wire feeds into the unit, saving installation time.

Technical support: Available at 866-303-8634, Monday through Friday from 8 a.m. to 4 p.m. Eastern time.

Technical support materials: Product brochure, engineering and spec guide, installation instructions, warranty and TXV installation instructions, and wiring diagrams.

Noise-reduction features: 5/8-inch foil-faced insulation and dynamically balanced blower wheels reduce noise in the unit.

IAQ equipment supported: UV lights; antimicrobial drain pans with Microban protection, which reduces mold and mildew growth.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Heaters and coils.

Additional features: Designed for increased flexibility, this new air handler includes premium features that enhance efficiency, the company says. The unit meets and exceeds U.S. minimums for energy standards, and increases serviceability for contractors. The R Series air handler is rated at 13 SEER and above, depending on the condenser match.

Warranty information: Five-year limited.

Special installation requirements: None.

Contact: Advanced Distributor Products, Stone Mountain, Ga.; attn: Christine Tucker, 770-465-5569; 770-465-5599 (fax); christine.tucker@adpnow.com; www.adpnow.com.

eProduct 152

AirEase

Model: 2SCU13LE split system

Footprint (inches): 25 by 26

Serviceability features: Four louvered panels are each removable with two screws. Control panel is removable by two screws; unit offers large control panel and service valve access, “U” channel routing for fan wiring. The suction line is mounted above liquid for brazing.

Technical support: Manufacturer did not specify.

Technical support materials: Wiring diagrams, service/troubleshooting information, installation data, parts, and part numbers.

Noise-reduction features: Sound blanket.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares parts with other models in the line.

Additional features: Appliance-like seams and contours with louvered panels. Wire fan guard, sound blanket to reduce noise. All Copeland scroll compressors. All units fixed orifice for most popular match.

Warranty information: 10-year compressor, five-year parts.

Special installation requirements: Manufacturer did not specify.

Contact: AirEase, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.

eProduct 153

Model: 2SHP13LE heat pump

Footprint (inches): 25 by 26

Serviceability features: Four louvered panels are each removable with two screws. Control panel removable by two screws; unit offers large control panel and service valve access, “U” channel routing for fan wiring, suction line mounted above liquid for easier brazing, LED diagnostic board.

Technical support: Manufacturer did not specify.

Technical support materials: Wiring diagrams, service/troubleshooting info, installation data, parts and part numbers.

Noise-reduction features: Sound blanket

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares parts with other models in the line.

Additional features: Appliance-like seams and contours with louvered panels. Wire fan guard, sound blanket to reduce noise. All Copeland scroll compressors. All units fixed orifice for most popular match. LED diagnostic board.

Warranty information: 10-year compressor, five-year parts.

Special installation requirements: Manufacturer did not specify.

Contact: AirEase, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.

eProduct 154

American Standard

Model: Allegiance 18 air conditioner/Heritage 18 heat pump

Footprint (inches): 41 (h) by 37 (w) by 34 (d)

Serviceability features: Easy-Sess™ service access panels for installation, service, and maintenance, including easy coil cleaning access.

Technical support: Contact local independent American Standard distributor.

Technical support materials: Supporting installation and service information, including part numbers, are available to independent American Standard distributors and their independent dealers.

Noise-reduction features: Compressor sound insulators available on certain models.

IAQ equipment supported: The proprietary AccuClean™ removes up to 99.98 percent of airborne allergens. American Standard whole-house Perfect Fit™ air cleaners available in 1- or 5-inch media, or electronic. American Standard humidifiers.

Thermostat compatibility: Compatible with certain thermostats; American Standard markets its own branded thermostats.

Replacement parts compatibility: Shares parts with other models in the line.

Additional features: Two-row Spine Fin™ coil provides very low airflow resistance for more efficiency transfer capabilities; dual American Standard Duration™ compressors; corrosion-resistant finish with SermaGuard™ rust-resistant fasteners; Durabase™ basepan; Energy Star® qualified.

Warranty information: 10-year limited compressor, 10-year limited coil, five-year limited all other parts. Extended warranties optional for 10-year parts-and-labor coverage.

Special installation requirements: Manufacturer did not specify.

Contact: American Standard, Tyler, Texas; attn: Jamie Byrne, 903-581-3300; 903-581-9070 (fax); jamie.byrne@americanstandard.com; www.americanstandardair.com.

eProduct 155

Arcoaire

Model: DX 1300 split system

Footprint (inches): 31 to 35 (w) by 32 to 37 (d)

Serviceability features: Three-piece grille panels are easy to remove separately to view and clean. Easy-access panel to compressor, internal components. Comfort Alert™ troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for troubleshooting access to components (plug and play). Control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.

Technical support: A technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training available at ICP mobile training centers at locations nationwide and at field schools held at participating distributor locations.

Technical support materials: Product information posted at Arcoaire dealer Website (www.arcoairedlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Units are equipped with Copeland scroll compressors, two-speed fan motors, and compressor sound jackets to produce minimal sound at maximum performance.

IAQ equipment supported: A full line of IAQ products is available, including filters, humidifiers, UV lights, and EACs.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Standardized parts throughout the line.

Additional features: Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. New air management system improves performance without increasing sound. Corner posts with grille panels add strength to the unit and reduce noise and vibration. Tight wire coil guard with 3/ 8 -inch spacing provides protection with optimal airflow.

Warranty information: 10-year limited compressor and five-year limited parts. R-410A model qualifies for the five-year No-Hassle Replacement warranty. R-22 model qualifies for a one-year No-Hassle Replacement warranty. (If the compressor fails within the specified number of covered years from the installation date, ICP says it will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Arcoaire products; the optional Homeowner’s Extended Labor Plan (HELP®) offers five- and 10-year plans.

Special installation requirements: TXV expansion devices recommended for maximum system reliability.

Contact: Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.arcoaire.com.

eProduct 156

Model: DX 1400 split system

Footprint (inches): 31 to 35 (w) by 32 to 37 (d)

Serviceability features: Easy-access panel to compressor, internal components. Three-piece grille panels are easy to remove separately to view and clean. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. Control box features easy-to-remove panel for troubleshooting access to components (plug and play); control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.

Technical support: A technical service advisor on staff at local distributors is available for technical assistance, troubleshooting. Technical training available at ICP mobile training centers at locations nationwide and at field schools held at participating distributor locations.

Technical support materials: Product information posted online at Arcoaire dealer Website (www.arcoairedlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.

Noise-reduction features: Units are equipped with Copeland scroll compressors, two-speed fan motors, and compressor sound jackets to produce minimal sound at maximum performance.

IAQ equipment supported: A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Standardized parts throughout the line.

Additional features: Tight wire coil guard with 3/ 8 -inch spacing provides protection with optimal airflow. Corner posts with grille panels add strength to the unit and reduce noise and vibration. New air management system improves performance without increasing sound. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions.

Warranty information: 10-year limited compressor, seven-year limited outdoor coil, five-year limited parts. This product qualifies for the seven-year No-Hassle Replacement warranty. (If the compressor or covered coil fails within seven years from the installation date, ICP says it will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Arcoaire products; the optional Homeowner’s Extended Labor Plan (HELP) offers five- and 10-year plans.

Special installation requirements: TXV expansion devices recommended for maximum system reliability.

Contact: Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.arcoaire.com.

eProduct 157

Armstrong Air

Model: 2PHP13 rooftop

Footprint (inches): 36 by 65

Serviceability features: Two-screw access to control panel, LED diagnostics on control board; service valves mounted high within the service panel; motor serviceable without removing the complete blower housing. All wires pulled to the far outside of unit and connection point.

Technical support: Manufacturer did not specify.

Technical support materials: Wiring diagrams, service/troubleshooting information, installation data, parts and part numbers.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Internal filter kit will hold a 1-, 2-, or 4-inch air filter.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares parts with other models in the line.

Additional features: All Copeland scroll compressors. LED diagnostic control board, 13 SEER efficiency, louvered panels, service valves mounted high inside the control panel.

Warranty information: 10-year compressor, five-year parts.

Special installation requirements: Manufacturer did not specify.

Contact: Armstrong Air, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.

eProduct 158

Model: 4PGE15 rooftop

Footprint (inches): 36 by 65

Serviceability features: Two-screw access to control panel, LED diagnostics on control board, Comfort Alert diagnostics; service valves mounted high within the service panel. Motor serviceable without removing the complete blower housing. All wires pulled to the far outside of unit and connection point.

Technical support: Manufacturer did not specify.

Technical support materials: Wiring diagrams, service/troubleshooting info, installation data, parts and part numbers.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Internal filter kit will hold a 1-, 2-, or 4-inch air filter.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models in the line.

Additional features: All Copeland scroll compressors. LED diagnostic control board and Comfort Alert diagnostics, 15 SEER efficiency, louvered panels.

Warranty information: 10-year compressor, five-year parts.

Special installation requirements: Manufacturer did not specify.

Contact: Armstrong Air, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.

eProduct 159

Bard Manufacturing Co.

Model: PA13 Series packaged air conditioner

Footprint (inches): 53 to 55 (l) by 26 to 33 (h) by 38 to 42 (w)

Serviceability features: Unique over-and-under supply-and-return configuration eliminates the need for field modification. Service features include ECM indoor blower motor, high- and low-pressure switches, and top-discharge outdoor fan. Electrical components and controls accessible through side panel.

Technical support: Available through local Bard distribution network.

Technical support materials: Service parts guides, wiring diagrams, installation manuals (printed and CD formats), Website.

Noise-reduction features: ECM indoor blower motor provides low sound levels and soft-start capabilities.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares standard Bard replacement parts.

Additional features: Unique over-and-under supply-and-return air configuration. Ideal for retrofit market, as it eliminates need for costly field modification. Protected by built-in high-pressure switch, five-minute compressor time-delay relay, and baked-on enamel paint designed to withstand 1,000 hours of salt spray exposure.

Warranty information: Five-year parts, five-year compressor.

Special installation requirements: None.

Contact: Bard Manufacturing Co., Bryan, Ohio; attn: Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct 160

Model: PH13 Series packaged heat pump

Footprint (inches): 53 to 55 (l) by 26 to 33 (h) by 38 to 42 (w)

Serviceability features: Unique over-and-under supply-and-return air configuration eliminates the need for field modification. Service features include ECM indoor blower motor, high- and low-pressure switches, and top-discharge outdoor fan. Electrical components and controls accessible through side panel.

Technical support: Available through local Bard distribution network.

Technical support materials: Service parts guides, wiring diagrams, installation manuals (printed and CD formats), Website.

Noise-reduction features: ECM indoor blower motor provides low sound levels and soft-start capabilities.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares standard Bard replacement parts.

Additional features: Unique over-and-under supply-and-return air configuration. Ideal for retrofit market, as it eliminates need for costly field modification. Protected by built-in high-pressure switch, five-minute compressor time-delay relay, and baked-on enamel paint designed to withstand 1,000 hours of salt spray exposure.

Warranty information: Five-year parts, five-year compressor.

Special installation requirements: None.

Contact: Bard Manufacturing Co., Bryan, Ohio; attn: Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct 161

Bryant Heating and Cooling

Model: Evolution System 187ANA split system

Footprint (inches): 33 by 29 by 36 (2 ton) to 40 by 35 by 46 (5 ton)

Serviceability features: Provides exceptional efficiency and comfort while simplifying service, the company says. Back-seating service valves and plug-and-play factory wiring for the Evolution™ control make for quick installation and easy maintenance. An on-board control allows communication with the Evolution control, providing up to 23 diagnostic checkpoints for servicers.

Technical support: Available at 800-428-4326 from 8 a.m. to 5 p.m. Eastern time, Monday through Friday.

Technical support materials: Wiring diagrams, installation and long-line application manuals, product data sheets, service manuals.

Noise-reduction features: AeroQuiet™ System II includes two-stage compressor, compressor sound blanket, forward-swept fan blades, split post-compressor grommets.

IAQ equipment supported: Perfect Air™ purifier, electronic air cleaner, EZ Flex media filter, humidifier, UV lamp, ventilator.

Thermostat compatibility: Evolution user interface or Thermidistat required.

Replacement parts compatibility: Some shared, some unique.

Additional features: Designed to provide optimal durability and reliability. In addition to incorporating design features like baked-on powder post-paint and appliance-style fit and finish, these products undergo an assembly process that includes a five-step, 100 percent run test to ensure the highest standards in each unit, the company says.

Warranty information: Five-year parts, 10-year compressor. Optional extended warranties available.

Special installation requirements: TXV is required on indoor coil to achieve performance levels. Not compatible with capillary tube metering.

Contact: Bryant Heating and Cooling, Indianapolis; attn: Susan Fisher, 317-240-2911; 860-998-2430 (fax); susan.fisher@bryant.com; www.bryant.com.

eProduct 162

Model: Preferred Series 165ANA split system

Footprint (inches): 29 by 33 by 40 (1.5 ton) to 35 by 40 by 48 (5 ton)

Serviceability features: Delivers high efficiency and indoor comfort while easing service diagnosis. Back-seating service valves and Evolution control compatibility make for quick and simple installation and maintenance. An on-board control allows communication with the Evolution control, providing 14-point diagnostic checkpoint information to the servicer.

Technical support: Available at 800-428-4326 from 8 a.m. to 5 p.m. Eastern time, Monday through Friday.

Technical support materials: Wiring diagrams, installation and long-line application manuals, product data sheets, service manuals.

Noise-reduction features: AeroQuiet System II includes two-stage compressor, compressor sound blanket, forward-swept fan blades, split post-compressor grommets.

IAQ equipment supported: Perfect Air™ purifier, electronic air cleaner, EZ Flex media filter, humidifier, UV lamp, ventilator.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared, some unique.

Additional features: Designed to provide efficiency, reliability, and comfort at extremely quiet sound levels — as low as 66 dBA, the company says. Baked-on powder paint, color-matched ceramic-coated cabinet screws, and appliance-style fit and finish contribute to the durable design of this product.

Warranty information: Five-year parts, 10-year compressor. Extended warranties optional.

Special installation requirements: TXV required on indoor coil to achieve performance levels. Not compatible with capillary tube metering.

Contact: Bryant Heating and Cooling, Indianapolis; attn: Susan Fisher, 317-240-2911; 860-998-2430 (fax); susan.fisher@bryant.com; www.bryant.com.

eProduct 163

Carrier Corp.

Model: Hybrid Heat System with Infinity 19 heat pump, Model 25HNA9

Footprint (inches): 40 (h) by 36 (d) by 43 to 46 (w)

Serviceability features: All system status codes can be accessed from the Infinity™ control; with remote access, dealers and homeowners can be notified of crucial system faults via e-mail or phone.

Technical support: Carrier’s 24-hour hotline is available at 800-586-8336.

Technical support materials: Wiring diagrams, troubleshooting information, installation data, parts and part numbers, product information. All technical support materials are immediately available to contractors via www.HVACPartners.com.

Noise-reduction features: The outdoor unit features SilencerSystem II™ sound-reduction components, which include split-post compressor grommets, external silencer muffler, SilencerSystem II design, ECM OD condenser fan motor, forward-swept condenser fan blade, compressor sound blanket, and laminated compressor plate. On the indoor section, the newly upgraded furnaces are up to 50 percent quieter than previous models.

IAQ equipment supported: Ideal Humidity™ system with SmartEvap™ and Superdehumidifier™ for improved air quality and economical Comfortfan™ for comfort. Infinity control serves as the information center with IAQ maintenance reminders; Infinity air purifier; humidifier products; UV germicidal light; Carrier energy recovery ventilator (ERV); and Carrier heat recovery ventilator (HRV).

Thermostat compatibility: Uses Infinity control.

Replacement parts compatibility: Shares many components except for some unique two-stage parts.

Additional features: Features the intelligence of the Infinity system. Unlike other dual-fuel systems, it will automatically switch from one fuel source to another when the temperature outside reaches a certain level. It offers homeowners control over their indoor comfort at the lowest operating cost during both the heating and cooling seasons.

Warranty information: Standard five-year limited all parts; 10-year limited compressor; limited lifetime furnace heat exchanger.

Special installation requirements: None. The heat pump has easy four-wire installation and factory-installed TXV.

Contact: Carrier Corp., New York; attn: Amanda Heng, 212-697-2600, ext. 297; 212-697-2646 (fax); aheng@gibbs-soell.com; www.carrier.com.

eProduct 164

Model: Infinity 21 Series split system, Model 24ANA1

Footprint (inches): 30 to 40 (h) by 29 to 35 (d) by 36 to 46 (w)

Serviceability features: Uses Carrier’s Microtube Technology™ and has up to an 18-point diagnostics system, back-seating service valves, high- and low-pressure switches, and plug-and-play factory wiring with the Infinity system. With Infinity remote access, homeowners and dealers can customize temperature and humidity levels, access and change vacation schedules, system status and more, via the telephone or the Internet.

Technical support: Carrier’s 24-hour hotline is available at 800-586-8336.

Technical support materials: Wiring diagrams, troubleshooting information, installation data, parts and part numbers, product information. All technical support materials are available to contractors via www.HVACPartners.com.

Noise-reduction features: The SilencerSystem II offers sound levels as low as 70 dBA. Quiet-mount split-post compressor grommets. Exclusive silencer top design. Variable-speed outdoor condenser fan motor. Forward-swept condenser fan blade. Compressor blanket.

IAQ equipment supported: Infinity air purifier; humidifier products; UV germicidal light; Carrier energy recovery ventilator (ERV); Carrier heat recovery ventilator (HRV), and remote access.

Thermostat compatibility: Uses Infinity user interface.

Replacement parts compatibility: Shares parts.

Additional features: Provides energy efficiency and savings to homeowners. When used with the complete Infinity system, owners can integrate and manage temperature, humidity, airflow, ventilation, IAQ, and zoning with a single, intelligent control. In addition, they are alerted when it’s time for regular maintenance and filter changes, and they can access their system status, settings, and schedules via phone or the Internet.

Warranty information: Standard five-year limited on all parts, 10-year limited compressor.

Special installation requirements: Microtube Technology refrigeration system is a 7-mm microtube heat transfer technology which has significantly reduced the size of each unit, enabling outdoor installation while being 13 SEER compliant. Plug-and-play factory wiring allows easier installation.

Contact: Carrier Corp., New York; attn: Amanda Heng, 212-697-2600, ext. 297; 212-697-2646 (fax); aheng@gibbs-soell.com; www.carrier.com.

eProduct 165

Century

Model: DMC18AS ductless mini-split air conditioner

Footprint (inches): Outdoor: 34 (w) by 13 (d) by 26 (h); indoor: 43 (w) by 12 (h) by 7 (d)

Serviceability features: Self-diagnostics simplify troubleshooting and a test key allows quick identification of any operating problems. Service ports/connections are conveniently located on the side of the condenser; indoor unit easily lifts off hanging bracket and cover can be removed for service.

Technical support: Technical support available at 517-787-2100 from 8 a.m. to 5 p.m. Eastern time, weekdays.

Technical support materials: installation-operation manual and complete service manual including parts lists can be mailed as PDFs or sent as hard copies.

Noise-reduction features: Indoor unit is designed for ultra-quiet operation with high-tech tangential fan for balanced air flow and to move large quantities of air at low fan speed. Condensing unit keeps loudest operating noises outside.

IAQ equipment supported: Washable antibacterial filters. Dehumidification mode can be used alone.

Thermostat compatibility: Built-in thermostat.

Replacement parts compatibility: Some parts are shared across the line, while some are unique.

Additional features: Low-voltage wiring for inside unit eliminates cost of adding special electrical service. Dual compressors are staged to enhance comfort and energy savings by reducing temperature variances. High-tech tangential fan moves high volumes of air at low fan speeds for ultra-quiet operation.

Warranty information: Five-year compressor, one-year other parts (see written warranty for limitations).

Special installation requirements: Requires a hole 3 inches in diameter to run refrigerant lines and wires between the indoor and outdoor units. Outdoor condenser can be located close to the home. A simple bracket is used to hang the indoor unit.

Contact: Century, Jackson, Mich.; attn: Mark Lupton, 517-787-1200; 517-787-9341 (fax); info@heatcontroller.com; www.heatcontroller.com.

eProduct 166

Model: HRH060 geothermal heat pump

Footprint (inches): 25 (w) by 71 (d) by 21 (h)

Serviceability features: Removable panels on three sides allow unit to be accessed from multiple sides. Removable blower inlet ring allows access to the fan and motor.

Technical support: Technical support available at 517-787-2100 from 8 a.m. to 5 p.m. Eastern time, weekdays.

Technical support materials: Manuals and parts list can be mailed as PDFs or sent as hard copies.

Noise-reduction features: Double-spring and grommet-isolation mounting system for the compressor. Flexible-torsion motor mount. Compressor and air handler compartments are separated by an insulated divider. Discharge muffler reduces inherent compressor pulse noise.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares many parts across the line.

Additional features: Extended operating range makes unit suitable for nearly all climates. Compact size makes units ideal for tight spaces or retrofit applications. Performance monitoring system signals a problem before lockout occurs. Also available in desuperheater models with circulating pump to generate domestic hot water.

Warranty information: Five-year parts, seven-year compressor (see written warranty for limitations).

Special installation requirements: Comes with TXV metering device. Hanger brackets are included. Discharge air arrangement can be converted in the field.

Contact: Century, Jackson, Mich.; attn: Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.heatcontroller.com.

eProduct 167

Chigo USA

Model: QCIC-12A cooling-only ductless mini-split

Footprint (inches): 35 by 7 by 11

Serviceability features: Fault codes are displayed on indoor unit. Easy access for all components and filter.

Technical support: Available at 800-244-4662 (800-CHIGONA) 8 a.m. to 5 p.m. Eastern time or 8 a.m. to 5:30 p.m. Pacific.

Technical support materials: Installation manuals, Chigo basic application guide.

Noise-reduction features: Low-speed fan motors.

IAQ equipment supported: Upgraded filters.

Thermostat compatibility: Wireless remote control provided.

Replacement parts compatibility: Shares parts.

Additional features: Chigo units provide quiet comfort and dehumidification for offices, bedrooms, and other areas requiring separate comfort from a central system.

Warranty information: One-year parts, five-year compressor.

Special installation requirements: Both refrigerant lines require insulating because capillary tube expansion device is located in the outdoor unit. Control voltage is line voltage, so 14-AWG wire must be used for control wiring.

Contact: Chigo USA, Los Angeles; attn: Kenneth Sanchez, 800-244-4662 (800-CHIGONA); 562-699-4351 (fax); ken@chigousa.com; www.chigousa.com.

eProduct 168

ClimateMaster

Model: ClimaDry whole-house dehumidification option for Tranquility 27 and Tranquility 20 geothermal heat pumps

Footprint (inches): 31 by 25 (3-ton model)

Serviceability features: Installed at factory, internal to the unit. A separate compressor and controls are not necessary, simplifying service. No refrigerant circuit modifications are necessary. The all-water system makes troubleshooting and service like any other ClimateMaster heat pump, the company says.

Technical support: Distributor technical support is available throughout the U.S. and Canada. Factory technical support for distributors is available Monday through Friday from 8 a.m. to 5 p.m. Central time at 405-745-6000.

Technical support materials: ClimaDry application manual.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Whole-house dehumidification option allows unit to operate as a dehumidifier in cooling or in heating. Standard 2