Residential Equipment Warms Up Winter

September 17, 2007
/ Print / Reprints /
ShareMore
/ Text Size+


Though your customers may be mellowing out in the last few days of summer, it’s not too soon for you to begin thinking about fall tune-ups and the cold blasts of winter that are on the way. The NEWS’ annual Residential Products Heating Showcase introduces the latest heating units available for the upcoming season. Information included in this showcase is based on what contractors have told us they’d like to see. It includes a product grid (see the PDF link at the bottom of this article) with a quick reference on technical facts. The following photo feature provides more in-depth information on each unit, highlighting features and benefits. The manufacturers provided us with the brief description of features included with each product. For more information, please contact the manufacturers or their distributors.

AirEase

Model: SHP14LE

Footprint (inches): 25 to 26 (w) by 27 to 38 (d) by 30 to 44 (h)

Serviceability features: Easy top and two-screw louvered-panel removal, two-screw control panel removal; 45-degree service valves with ease of access and gauge attachment.

Technical support: Available 8 a.m.-4:30 p.m., Monday through Friday at 800-515-3501.

Technical support materials: Full technical support documentation available.

Noise-reduction features: Sound blanket standard with sound control top also QuietShift™ capable.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with 13 SEER.

Additional features: Manufacturer did not specify.

Warranty information: Ten-year compressor, five-year parts.

Special installation requirements: TXV kit required to meet 14 SEER ARI rating.

Contact: AirEase; attn Coushatta Fuller, 803-738-4114; 972-808-8450 (fax); coushatta.fuller@alliedair.com; www.alliedair.com.

eProduct 160

Amana

Model: APG15 packaged gas/electric unit

Footprint (inches): 47 by 51

Serviceability features: Features a two-stage gas valve that allows two-stage operation. The control board has self-diagnostic controls.

Technical support: Available 7 a.m.-7 p.m. Central, Monday-Friday, via Goodman’s technical hotline, 888-593-9988.

Technical support materials: APG15 spec sheet, installation manual, operations manual, technical manual, and service manuals included. All support materials can be accessed through the partner link on www.goodmanmfg.com. Contact local distributor for full access information.

Noise-reduction features: Features a high-quality compressor sound blanket to reduce noise, as well as fully insulated, heavy-gauge steel cabinets with durable baked-enamel finish.

IAQ equipment supported: The two-stage, low-velocity fan provides efficient air circulation and filtration throughout the home. The APG15 is designed to minimize NOx emissions.

Thermostat compatibility: Compatible with single- and two-stage thermostats.

Replacement parts compatibility: Shares many common components with other Amana brand products.

Additional features: Features a patented stainless steel tubular heat exchanger.

Warranty information: Lifetime limited heat exchanger and compressor, 10-year limited parts.

Special installation requirements: None.

Contact: Amana; attn Rex Anderson, 713-263-5064; 713-589-8059 (fax); rex.anderson@goodmanmfg.com; www.amana-hac.com.

eProduct 161

Model: APH15 packaged heat pump

Footprint (inches): 47 by 51

Serviceability features: Features a two-stage compressor for higher efficiencies and comfort. One roof curb fits all units.

Technical support: Available 7 a.m.-7 p.m. Central, Monday through Friday via Goodman’s technical hotline, which is 888-593-9988.

Technical support materials: APH15 spec sheet, installation manual, operations manual, technical manual, and service manuals included. All support materials can be accessed through the partner link on www.goodmanmfg.com. Contact local distributor for full access information.

Noise-reduction features: Features a high-quality compressor sound blanket to reduce noise, as well as fully insulated, heavy-gauge steel cabinets with durable baked-enamel finish.

IAQ equipment supported: The multispeed fan provides efficient air circulation and filtration throughout the home.

Thermostat compatibility: Compatible with single- and two-stage thermostats.

Replacement parts compatibility: Shares many common components with other Amana brand products.

Additional features: Features a two-stage compressor for better comfort.

Warranty information: Lifetime limited compressor, 10-year limited parts.

Special installation requirements: None.

Contact: Amana; attn Rex Anderson, 713-263-5064; 713-589-8059 (fax); rex.anderson@goodmanmfg.com; www.amana-hac.com.

eProduct 162

American Standard

Model: Freedom 95 furnace with ComfortR™

Footprint (inches): 40 (h) by 28 (d) by 18 to 25 (w)

Serviceability features: Self diagnostic electronic controls with LitePort™, which controls every function with digital accuracy, complete with safety features and built-in troubleshooting capabilities. Easy to get to, adaptive hot surface ignition with silicon nitride igniters.

Technical support: American Standard dealers have access to technical support through their local field service representatives (FSRs).

Technical support materials: All technical data available to American Standard dealers via the Internet (AmStdnet)

Noise-reduction features: Insulated blower cabinets, ECM variable-speed blower motors, and variable-speed inducer motors.

IAQ equipment supported: All furnaces ship with internal washable filters and have the capability of adding the AccuClean whole-home filter system, which effectively removes air particles at an air filtration rate of 99.98 percent down to the 0.1-micron level.

Thermostat compatibility: These furnaces perform best with American Standard comfort controls but will operate with most all two-stage heating thermostats.

Replacement parts compatibility: Many common replacement parts within the line of these furnaces.

Additional features: Offers industry-leading AFUE rating of up to 96.7 percent, which contributes to higher energy efficiency for the end user. Also, it qualifies for $150 federal tax credit for the consumer.

Warranty information: Lifetime on primary and secondary heat exchangers, five-year parts for the rest of the furnace.

Special installation requirements: No different than the other condensing furnaces offered by American Standard. Easy connections to the gas lines, easy to mount furnace in various mounting configurations, and easy to wire.

Contact: American Standard; attn Jamie Byrne, 903-581-3300; 903-581-9070 (fax); jamie.byrne@americanstandard.com; www.americanstandardair.com.

eProduct 163

Model: Heritage Hybrid™ 16 Comfort System, 4DCZ6 heat pump with gas furnace

Footprint (inches): 38 (h) by 51 (w) by 43 (d)

Serviceability features: Locating critical components is easy with independently removable embossed service panels. System controls, stainless steel burners and straight in gas line are easily accessible. The slide-out Vortica blower is mounted by a single fastener. Secured with rotolock fittings, the Duration compressor is conveniently located in the left corner compartment.

Technical support: Contact local independent American Standard distributor.

Technical support materials: Installation and service information, including parts numbers, are readily available to independent American Standard distributors and their independent dealers.

Noise-reduction features: The variable-speed blower fan motor and exclusive Comfort-R controls eliminate noisy startup and shutdown. Super-quiet, high-efficiency ducted fan moves air with a sophisticated aerodynamic blade for the quietest performance on the market, the company says. Sound ratings 70-73 dB.

IAQ equipment supported: Includes the AccuExchange ERV, which removes stale indoor air and replaces it with an equal amount of fresh outdoor air. Motorized and manual fresh air dampers and economizers can provide up to 25 percent fresh air to the conditioned space. Available humidifiers prevent dryness and reduce static electricity.

Thermostat compatibility: Requires American Standard 402, 802 or 803 comfort control.

Replacement parts compatibility: Majority of replacement parts are shared with other models in the line.

Additional features: The highest efficiency and quietest dual fuel packaged model available. With the capacity to operate as a two-stage electric heat pump and two-stage gas furnace, the Heritage Hybrid provides comfort under any condition with the flexibility to choose between two energy sources.

Warranty information: Twenty-year heat exchanger, 10-year compressor/condenser, five-year parts.

Special installation requirements: Manufacturer did not specify.

Contact: American Standard; attn Jamie Byrne, 903-581-3300; 903-581-9070 (fax); jamie.byrne@americanstandard.com; www.americanstandardair.com.

eProduct 164

Arcoaire

Model: PGX4 packaged gas/electric unit

Footprint (inches): 47 (w) by 47 to 73 (d)

Serviceability features: Electrical and gas controls located behind one exterior panel for easier maintenance. Externally mounted gauge ports allow for more accurate reading of operating conditions. Comfort Alert™ Ultratech™ diagnostics device on all models.

Technical support: A network of factory-trained Technical Service Advisors (TSAs), on staff at local distributors, provides technical assistance and troubleshooting.

Technical support materials: Product information posted online (www.goarcoaire.com) includes spec sheets, I&O manuals, and tech support/parts manuals (also available from local distributors).

Noise-reduction features: Advanced air management system for quieter operation.

IAQ equipment supported: Dehumidification in cooling mode.

Thermostat compatibility: Two-stage heat-cool thermostat required.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Features a variable-speed ECM motor, stainless steel tubular heat exchanger, high-efficiency, two-stage Copeland scroll compressor, and environmentally sound R-410A. Condenser coil has sturdy wire inlet grilles and UV-rated vinyl mesh for extra protection.

Warranty information: Seven-year limited No Hassle Replacement; lifetime limited heat exchangers; 10-year limited compressor; seven-year limited coil; five-year limited parts. HELP® extended service agreement offers a five- and 10-year extended service agreement on parts and labor.

Special installation requirements: Manufacturer did not specify.

Contact: Arcoaire; attn John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.arcoaire.com.

eProduct 165

Model: PS92 furnace

Footprint (inches): 19 to 25 (w) by 29 (d)

Serviceability features: A built-in electronic diagnostic system is easy to view through a sight glass in the blower door. Extra-spacious service compartments provide room to work. Entire blower assembly mounted on rails.

Technical support: A network of factory-trained Technical Service Advisors (TSAs), on staff at local distributors, provides technical assistance and troubleshooting.

Technical support materials: Product information posted online (www.goarcoaire.com) includes spec sheets, I&O manuals, and tech support/parts manuals (also available from local distributors).

Noise-reduction features: Solid doors provide a sealed combustion compartment for quieter operation.

IAQ equipment supported: Predrilled accessory holes and convenient wiring hookups make it easier to add humidifiers, electronic air cleaners, and other accessories; 24- and 115-vac humidifier terminal; electronic air cleaner terminal.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Four position installation capability. Direct ignition with silicon nitride igniters that last longer, can withstand high-line voltage, and don’t require voltage regulators. Meets California low-NOx standards. Dual certified venting. Internal condensate drain system. High temperature limit control prevents overheating.

Warranty information: Twenty-year limited heat exchanger; five-year limited parts. HELP® extended service agreement offers a five- and 10-year extended service agreement on parts and labor.

Special installation requirements: Shipped as natural gas in upflow configuration, with all parts included for downflow, horizontal-left and right with no need for accessory conversion kits. LP gas kits available.

Contact: Arcoaire; attn John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.arcoaire.com.

eProduct 166

Armstrong

Model: SHP14LE

Footprint (inches): 25 to 26 (w) by 27 to 38 (d) by 30 to 44 (h)

Serviceability features: Easy top and two-screw louvered-panel removal, two-screw control panel removal; 45-degree service valves with ease of access and gauge attachment.

Technical support: Available 8 a.m.-4:30 p.m., Monday through Friday at 800-515-3501.

Technical support materials: Full technical support documentation available.

Noise-reduction features: Sound blanket standard with sound control top; also capable of applying QuietShift™ technology.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with 13 SEER systems.

Additional features: Manufacturer did not specify.

Warranty information: Ten-year compressor, five-year parts.

Special installation requirements: TXV kit required to meet 14 SEER ARI rating.

Contact: Armstrong; attn Coushatta Fuller, 803-738-4114; 972-808-8450 (fax); coushatta.fuller@alliedair.com; www.alliedair.com.

eProduct 167

Bard Manufacturing Co.

Model: GSV Series packaged geothermal heat pump

Footprint (inches): 26 to 27 (d) by 48 to 56 (h) by 28 to 33 (w)

Serviceability features: Features scroll compressor, variable-speed ECM motor, built-in domestic hot water heat exchanger, high- and low-pressure switches, moveable control panel, slide-in electric heat strips, fully insulated high-efficiency cupro-nickel coaxial water coil, TXV. All water connections on outside of cabinet for ease of installation.

Technical support: Available through local distribution network.

Technical support materials: Service part guides, wiring diagrams, installation manuals (printed and CD), Website.

Noise-reduction features: Compressor/service compartment insulated to reduce noise levels, variable-speed ECM blower motor: soft starting, constant cfm over a wide range of static pressure.

IAQ equipment supported: Compatible with field-installed electronic air cleaner or high-efficiency media-type filters through the installing dealer.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares standard Bard replacement parts.

Additional features: Suitable for ground water- or earth-loop applications, ARI 330 certified, cupro-nickel water coil, slide-in electric heater packages, domestic hot water heat exchanger factory installed, and variable-speed ECM blower motor.

Warranty information: Five-year parts, five-year compressor.

Special installation requirements: Manufacturer did not specify.

Contact: Bard Manufacturing Co.; attn Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct 168

Model: PH13 Series packaged heat pump

Footprint (inches): 53 to 55 (l) by 26 to 33 (h) by 38 to 42 (w)

Serviceability features: Over and under supply and return configuration eliminates the need for costly field modification. Service features include ECM indoor blower motor, high- and low-pressure switches, top discharge outdoor fan, electrical components and controls readily accessible through side panel.

Technical support: Available through local Bard distribution network.

Technical support materials: Service parts guides, wiring diagrams, installation manuals (printed and CD formats), Website.

Noise-reduction features: ECM indoor blower motor provides low sound levels and soft-start capabilities.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares standard Bard replacement parts.

Additional features: Unique over and under supply and return air configuration. Ideal for retrofit market; it eliminates the need for costly field modifications. Protected by built-in high-pressure switch, five-minute compressor time-delay relay, and baked-on enamel paint designed to withstand 1,000 hours of salt spray exposure.

Warranty information: Five-year parts, five-year compressor.

Special installation requirements: Manufacturer did not specify.

Contact: Bard Manufacturing Co.; attn Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct 169

Bryant Heating and Cooling

Model: HydroPlus Coil HC3AXX024100

Footprint (inches): 18 by 24 by 19

Serviceability features: Manufacturer did not specify.

Technical support: Manufacturer did not specify.

Technical support materials: Installation data.

Noise-reduction features: Insulation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible, but requires Evolution™ system for easier installation and consumer benefits.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Compatible with an Evolution system for great consumer comfort and ease of installation. The coil comes in either two or three rows and operates in a multipoise orientation without any further modifications. Also, it brings the Hybrid Heat™ system capability to hydronics customers.

Warranty information: Five-year parts.

Special installation requirements: Evoluation capability with KFAIF010HWC hydronics kit.

Contact: Bryant Heating and Cooling; attn Jonathan Payne, 317-240-5277; 860-660-8623 (fax); jonathan.payne@bryant.com; www.bryant.com.

eProduct 170

Model: Plus 95s PerfectSense 355 CAV furnace

Footprint (inches): Manufacturer did not specify.

Serviceability features: Evolution system controls offer 83 system diagnostic points. Setting rate is as easy as Bryant’s existing furnaces, the company says. Unit offers enhanced Evolution System communication.

Technical support: Contact local Bryant distributor.

Technical support materials: Contact local Bryant distributor.

Noise-reduction features: Low stage offers extremely quiet operation. This system operates in low stage nearly 83 percent of the time.

IAQ equipment supported: The factory-supplier media cabinet allows for constant air filtration for improved air quality, while consuming less energy as compared to single- or two-stage furnaces.

Thermostat compatibility: Can operate with a single-stage thermostat, but an Evolution system control is recommended.

Replacement parts compatibility: Shares common parts with existing Bryant furnaces.

Additional features: Extremely low operating cost with low modulating operation when functioning at 40 percent level which yields 60 percent less operating consumption as compared to single-stage gas furnace of the same capacity. When used with Evolution eight-zone system, each zone is further optimized with temperature control.

Warranty information: Limited lifetime heat exchanger, five-year remaining parts.

Special installation requirements: Automatic startup and configuration if used with Evolution controls, no dip switches required.

Contact: Bryant Heating and Cooling; 860-660-8623 (fax); www.bryant.com.

eProduct 171

Burnham

Model: Freedom CM™ condensing boiler

Footprint (inches): Wall-hung units 18 (w) by 17 (d) by 32 (h)

Serviceability features: Flip-down access to the MCBA control module, which provides operating and troubleshooting information on a display readout. All components can be easily accessed through lower drop-down panels and easily removable front cover. Up-front access to wiring and controls, all piping and venting exits top of boiler. Easy to see front-facing pressure-temperature gauge.

Technical support: Field sales representatives and technical service specialists are available for assistance.

Technical support materials: Complete I&O manual with diagrams, parts, and service information is available at www.burnham.com.

Noise-reduction features: Product designed as a sealed combustion unit with quiet operation.

IAQ equipment supported: Product operates as a sealed combustion unit using polypropylene concentric venting that is included with the boiler.

Thermostat compatibility: Works with standard or electronic thermostats.

Replacement parts compatibility: Serviceable parts mainly apply to Freedom boilers.

Additional features: This high-efficiency, wall-hung, cast aluminum condensing boiler has a fully modulating control system, standard indoor-outdoor reset, included concentric polypropylene venting system has AFUEs that exceed 95 percent (some of highest in boiler industry) and has a modern, sleek jacket design.

Warranty information: Factory warranty for manufacturing defects for 15 years on the heat exchanger. An optional five- or 10-year parts and labor warranty is also available.

Special installation requirements: Polypropylene venting system is included with the boiler. Boiler is designed to be wall-hung (mounting bracket included) and has an optional matching pedestal available for floor mounting. Also designed to work efficiently with a Burnham Alliance SL™ indirect-fired water heater for abundant domestic hot water.

Contact: Burnham; attn Ken Niemi, 717-397-4701; 717-293-5827 (fax); kniemi@burnham.com; www.burnham.com.

eProduct 172

Carrier

Model: GT-PX water-to-air heat pump

Footprint (inches): 25 (w) by 31 (d)

Serviceability features: Multiple service access panels with liftout handles, low profile control box, foil-faced air handler insulation, diagnostic lights, filter-drier, high- and low-pressure service ports, swivel-type water connections, 75-VA transformer with circuit breaker, quick-attach wiring harnesses, seven standard safeties including water and air coil freeze protection.

Technical support: Contact local distributor.

Technical support materials: Installation, operation, and maintenance manual; product catalog; CXM/DXM microprocessor controls application manual; GeoDesigner™ loop-sizing software.

Noise-reduction features: Compressor double isolation system with computer selected springs; compressor discharge muffler; fully insulated cabinet; ECM variable-speed fan motor; oversized, low rpm blower.

IAQ equipment supported: Standard MERV 11, pleated 2-inch filter; foil-backed air handler insulation; dehumidification mode available with the addition of a humidistat or integrated thermostat.

Thermostat compatibility: Compatible with most heat pump thermostats.

Replacement parts compatibility: Shares replacement parts with other 50YD Series units.

Additional features: Unique features such as double-isolated compressor mounting and ECM variable-speed motor make it one of the quietest units on the market, the company says. Features such as foil-backed air handler insulation, standard MERV 11, pleated 2-inch filters, and dehumidification mode promote IAQ.

Warranty information: Five-year parts; 10-year compressor and refrigeration circuit; labor allowance for first 30 days; extended warranties available.

Special installation requirements: None.

Contact: Carrier; attn Kent Kuffner, 317-240-5157; 317-240-5666 (fax); kent.kuffner@carrier.com; www.carriergeo.com.

eProduct 173

Century

Model: GeoMax 2 HTS Series geothermal heat pump

Footprint (inches): 22 by 26 to 25 by 31

Serviceability features: Panels on three sides are removed for access to components, even in tight spots. Back-seating service valves are included. Controls monitor performance, signaling problems before lockouts can occur.

Technical support: Technical support is available at 517-787-2100, 8 a.m.-5 p.m. Eastern, weekdays.

Technical support materials: IOM and parts list can be e-mailed as PDFs or sent as hard copies; also available online.

Noise-reduction features: Double isolation compressor mounting system and vibration isolation springs; insulated divider and separate compressor compartment.

IAQ equipment supported: With the two-stage design, the unit runs almost constantly in the part-load mode; this means air is pulled through the filter with greater frequency for increased filtration.

Thermostat compatibility: Two-stage thermostat recommended.

Replacement parts compatibility: Most parts across the HTS line are shared.

Additional features: Unit runs at 67 percent capacity most of the time, shifts on the fly to 100-percent on demand. Hot water generator with pump and cupro-nickel coil are standard. Compact cabinets can be stacked for use in multiunit installation. Extended operating range for virtually all applications.

Warranty information: Twelve-year compressor, six-year other parts, see printed warranty for details/limitations. Extended warranties to cover parts and labor are also available.

Special installation requirements: Geothermal ground water or ground loop installation.

Contact: Century; attn Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.century-hvac.com.

eProduct 174

Model: GL-B Series furnace

Footprint (inches): 17 to 24 (w) by 29 (d) by 34 (h)

Serviceability features: Furnace filter and components are accessed by removing two thumb screws to remove the front panel doors. Controls are integrated into a single board that also includes on-board diagnostics.

Technical support: Technical support is available at 517-787-2100, 8 a.m.-5 p.m. Eastern, weekdays.

Technical support materials: IOM and parts list can be e-mailed as PDFs or sent as hard copies; also available online.

Noise-reduction features: Draft inducer, slow-opening gas valve, direct spark ignition and in-shot burners along with foil-faced insulation all contribute to quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Many parts across the GL furnace line are shared.

Additional features: Most recently updated with reliable, direct spark premium ignition system. Also now covered by enhanced warranty. At only 34 inches in height, units are ideal for replacements and new construction, offer installation flexibility - left or right electric and condensate connections, etc. Available in upflow and downflow/horizontal models. Efficiency is rated at 92 percent or better.

Warranty information: Twelve-years parts (to original owner when registered), lifetime primary and secondary heat exchangers. Extended warranties on parts and labor also available.

Special installation requirements: Simple-to-install furnaces come assembled and prewired; control board is already set up to accept central air and electronic air cleaner.

Contact: Century; attn Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.century-hvac.com.

eProduct 175

Chigo USA

Model: QCIH-09A ductless heat pump

Footprint (inches): Indoor: 31 by 11 by 7; Outdoor: 31 by 9 by 21

Serviceability features: Fault codes are displayed on indoor unit. Easy access for all components. Easy filter access.

Technical support: Available at 877-244-4662 (877-CHIGONA), 8 a.m.-5 p.m. Eastern or 8:30 a.m.-5:30 p.m. Pacific time.

Technical support materials: Wiring diagrams, Chigo basic technical, Chigo 107.

Noise-reduction features: Compressor blanket.

IAQ equipment supported: Dual washable filters.

Thermostat compatibility: Wireless remote controller provided.

Replacement parts compatibility: Some parts common.

Additional features: Easy to install, low noise levels, 115-V power supply, small footprint.

Warranty information: Five-year compressor, one-year parts, 30-day limited labor.

Special installation requirements: 115-V power and control voltage, expansion device is in the outdoor unit, so both refrigerant lines require insulating; 5/ 1 6 -inch access port.

Contact: Chigo USA; attn John Miles, 877-244-4662 (877-CHIGONA); 562-699-4351 (fax); johnm@chigousa.com; www.chigousa.com.

eProduct 176

Model: QCIH-18A ductless heat pump

Footprint (inches): Indoor: 42 by 9 by 13; outdoor: 34 by 11 by 33

Serviceability features: Fault codes are displayed on indoor unit. Easy access for all components. Easy filter access.

Technical support: Available at 877-244-4662 (877-CHIGONA), 8 a.m.-5 p.m. Eastern or 8:30 a.m.-5:30 p.m. Pacific time.

Technical support materials: Wiring diagrams, Chigo basic technical, Chigo 107.

Noise-reduction features: Compressor blanket.

IAQ equipment supported: Dual washable filters.

Thermostat compatibility: Wireless remote controller provided.

Replacement parts compatibility: Some parts common.

Additional features: Easy to install, low noise levels, small footprint, 50-foot line set length.

Warranty information: Five-year compressor, one-year parts, 30-day limited labor.

Special installation requirements: 208-/230-V power and control voltage, expansion device is in the outdoor unit so both refrigerant lines require insulating, 5/ 1 6 -inch gauge access port.

Contact: Chigo USA; attn John Miles, 877-244-4662 (877-CHIGONA); 562-699-4351 (fax); johnm@chigousa.com; www.chigousa.com.

eProduct 177

ClimateMaster

Model: Tranquility high-temperature water-to-water heat pump, THW010

Footprint (inches): 26 (w) by 27 (d)

Serviceability features: Hinged service access panels, foil-faced insulation, diagnostic lights, filter-drier, high- and low-pressure service ports, integral controls with LCD user interface, 75-VA transformer with circuit breaker, quick-attach wiring harnesses, seven standard safeties including low temperature water sensing and inoperative thermistor indication.

Technical support: Local distributor or factory support is available at 800-299-9747, 8 a.m.-5 p.m. Central Time, Monday through Friday.

Technical support materials: Installation, operation and maintenance manual; engineering design guide/hydronics application manual; CXM/DXM microprocessor controls application manual; GeoDesigner™ loop sizing software.

Noise-reduction features: Unique compressor double isolation system with computer selected springs; fully insulated cabinet; compressor discharge muffler; compressor enclosure.

IAQ equipment supported: Product is designed for hydronic heating. Separate air-handling system and/or HRV/ERV required for indoor air treatment.

Thermostat compatibility: Controls integrated into unit.

Replacement parts compatibility: Shares replacement parts with other ClimateMaster residential units.

Additional features: Model THW has high-temperature capabilities (up to 145°F leaving water temperature), ultra high efficiencies, Mitsubishi scroll compressor, and on-board controls/user interface with many standard features, including outdoor temperature reset, warm weather shutdown, cooling enable, buffer tank/DHW tank thermistors, backup boiler/heat pump staging, pump control, and more.

Warranty information: Five-year all parts; 10-year compressor and refrigeration circuit; labor allowance for first 30 days; extended warranties available.

Special installation requirements: Contractor should be familiar with hydronic heating systems.

Contact: ClimateMaster; attn Jeff Hammond, 405-745-6000; 405-745-4102 (fax); jhammond@climatemaster.com; www.climatemaster.com.

eProduct 178

Model: Tranquility 27 water-to-air heat pump, TT072

Footprint (inches): 25 (w) by 31 (d)

Serviceability features: Multiple service access panels with liftout handles, low-profile control box, foil-faced air handler insulation, diagnostic lights, filter-drier, high- and low-pressure service ports, swivel-type water connections, 75-VA transformer with circuit breaker, quick-attach wiring harnesses, eight standard safeties including water and air coil freeze protection, Unit Performance Sentinnel™.

Technical support: Local distributor or factory support is available at 800-299-9747, 8 a.m.-5 p.m. Central, Monday through Friday.

Technical support materials: Installation, operation and maintenance manual; specs catalog; CXM/DXM microprocessor controls application manual; GeoDesigner™ loop sizing software.

Noise-reduction features: Unique compressor double isolation system with computer selected springs; compressor discharge muffler; fully insulated cabinet; ECM variable-speed fan motor; oversized, low rpm blower.

IAQ equipment supported: Standard MERV 11, pleated 2-inch filter; foil-backed air-handler insulation; dehumidification mode available with the addition of a humidistat or integrated thermostat.

Thermostat compatibility: Compatible with most heat pump thermostats.

Replacement parts compatibility: Shares replacement parts with other TT Series units.

Additional features: Features such as double-isolated compressor mounting and ECM variable-speed motor make it one of the quietest units on the market, says the company. Features such as foil-backed air handler insulation, standard MERV-11 pleated 2-inch filters and dehumidification mode promote IAQ.

Warranty information: Five-year parts; 10-year compressor and refrigeration circuit; labor allowance for first 30 days; extended warranties available.

Special installation requirements: None.

Contact: ClimateMaster; attn Jeff Hammond, 405-745-6000; 405-745-4102 (fax); jhammond@climatemaster.com; www.climatemaster.com.

eProduct 179

Coleman

Model: Comforteer™ GM9F furnace

Footprint (inches): 40 (h) by 29 (d)

Serviceability features: Easy to service and maintain due to the redesign/relocation of many common serviceable parts. The control box is located in the front of the furnace, providing access to low-voltage wiring installation. Blower service is simplified thanks to a relocated door switch, a capacitor moved to the blower housing, and a new vent blower connection.

Technical support: First level of support provided by distributor; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available 7 a.m.-6 p.m. Eastern.

Technical support materials: Coleman® Comforteer high-efficiency gas furnace technical guide and consumer brochure.

Noise-reduction features: A new steel casing heat exchanger liner improves insulating performance for quieter operation.

IAQ equipment supported: The unit has a steel liner that can be easily cleaned.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Utilizes standard components and many are shared with similar models in the Coleman furnace line-up.

Additional features: Provides 95 percent AFUE energy efficiency in an economical single-stage furnace design, making this product Energy Star rated and offering a federal energy tax credit to save customers money.

Warranty information: Limited lifetime heat exchanger, five-year limited all other components. Performance Promise Plan™, an extended warranty, is available with total parts-and-labor coverage on the system for up to 10 years.

Special installation requirements: Designed for residential and commercial installations in a basement, closet, alcove, recreation room or garage where the ambient temperature is above 30°F. They may be either side wall or through-the-roof vented using approved plastic type combustion air and vent piping. Venting can be 1-pipe, 1 ½-pipe, or 2-pipe sealed combustion.

Contact: Coleman; attn Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.colemanac.com.

eProduct 180

Comfort-Aire

Model: GM-A Series furnace

Footprint (inches): 14 (w) by 29 (d) by 34 (h) to 24 (w) by 29 (d) by 34 (h)

Serviceability features: Front panels pull off easily to access furnace filter and components; there are no screws to remove. Controls are integrated into a single board that also includes on-board diagnostics. Compact size means there’s plenty of working room around the furnace.

Technical support: Technical support is available at 517-787-2100, 8 a.m.-5 p.m. Eastern, weekdays.

Technical support materials: IOM, service manual and parts list can be e-mailed as PDFs or sent as hard copies; also available online.

Noise-reduction features: Draft inducer, slow-opening gas valve, and electronic ignition along with foil-faced insulation and new solid front panel all contribute to quiet operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Many parts across the furnace line are shared.

Additional features: Most recently updated with reliable, direct spark premium ignition system. Also now covered by enhanced warranty. At 34 inches in height, units are ideal for replacements and new construction, offer installation flexibility (left or right gas, electric, and condensate connections, etc.). Available in upflow/horizontal and downflow models.

Warranty information: Twelve-year parts (to original owner when registered), 20-year heat exchanger. Extended warranties to cover parts and labor are also available.

Special installation requirements: Simple to install. Furnaces come assembled and prewired; control board is already set up to accept central air and electronic air cleaner.

Contact: Comfort-Aire; attn Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.comfort-aire.com.

eProduct 181

Model: MPH Series packaged heat pump

Footprint (inches): 59 (w) by 33 (d) by 29 to 37 (h)

Serviceability features: Outdoor section top cover removes for access to components. Control box incorporates plenty of room for connections; wires are coded by number and color. Indoor top section opens easily for access to blower, motor and indoor coil; large wiring diagram is mounted in control box. Side panel accesses drain pan.

Technical support: Technical support is available at 517-787-2100, 8 a.m.-5 p.m. Eastern, weekdays.

Technical support materials: IOM and parts list can be e-mailed as PDF or sent as hard copies; also available online.

Noise-reduction features: Top fan discharge and scroll compressor help to reduce unwanted noise, as does foil-faced interior insulation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Many parts across the MPH and MAH (cooling only) lines are shared.

Additional features: Units are efficient, quick to install, and easy to service. Can be installed flush to the structure without blocking airflow. Forkable baserails make unit easy to handle, even on rooftops, and protect the unit from ground moisture. Optional electric heat can be installed in the field. Powder coat finish reduces sharp edges.

Warranty information: Five-year compressor, one-year parts; see printed warranty for details/limitations. Extended warranties for parts and labor are also available.

Special installation requirements: None; note that two 14-inch duct collars are included.

Contact: Comfort-Aire; attn Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.comfort-aire.com.

eProduct 182

Comfortmaker

Model: PS92 furnace

Footprint (inches): 19 to 25 (w) by 29 (d)

Serviceability features: Extra-spacious service compartments provide room to work. Entire blower assembly mounted on rails. Self-diagnostic system can be viewed through sight glass in the blower door.

Technical support: A network of factory-trained Technical Service Advisors (TSAs), on staff at local distributors, provides technical assistance and troubleshooting.

Technical support materials: Product information posted online at Comfortmaker dealer Website www.gocomfortmaker.com includes spec sheets, I&O manuals, and tech support/parts manuals (also available from local distributors).

Noise-reduction features: Solid doors provide a sealed combustion compartment for quieter operation.

IAQ equipment supported: 24- and 115-vac humidifier terminal. Electronic air cleaner terminal. Predrilled accessory holes and convenient wiring hook-ups make it easier to add accessories.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Dual certified for one- or two-pipe venting. Direct ignition with silicon nitride igniters that last longer, can withstand high-line voltage and don’t require voltage regulators. Internal condensate drain system. Upflow/downflow/horizontal installation capability. High temperature limit control prevents overheating. Meets California low-NOx standards.

Warranty information: Twenty-year limited heat exchanger; five-year limited parts. HELP® extended service agreement offers a five- and 10-year extended service agreement on parts and labor.

Special installation requirements: Shipped as natural gas in upflow configuration, with all parts included for downflow, horizontal-left and right with no need for accessory conversion kits. LP gas kits available.

Contact: Comfortmaker; attn John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.comfortmaker.com.

eProduct 183

Model: SoftSound® DLX 95 furnace

Footprint (inches): 19 to 25 (w) by 29 (d)

Serviceability features: Control board mounting plate is modified for access while servicing. Conventional gas valves come standard for replacement and troubleshooting. The furnace comes equipped with a troubleshooting LED fault indicator that will diagnose practically all system related malfunctions, and it’s easy to view through sight glass in the blower door, the company says.

Technical support: A network of factory-trained Technical Service Advisors (TSAs), on staff at local distributors, provides technical assistance and troubleshooting.

Technical support materials: Product information posted online at Comfortmaker dealer Website (www.gocomfortmaker.com) includes spec sheets, I&O manuals, and tech support/parts manuals (also available from local distributors).

Noise-reduction features: Solid doors provide a sealed combustion compartment for quieter operation. The one-piece steel cabinet is thermal-lined for added sound protection.

IAQ equipment supported: Predrilled accessory holes and convenient wiring hook-ups make it easier to add humidifiers, electronic air cleaners and other accessories.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Furnace is dual-certified for one- or two-pipe venting. All DLX 95 gas furnaces installed during 2006 and 2007 qualify for the $150 federal tax credit for 95-percent AFUE gas furnaces when installed in upflow orientations. Some horizontal installations may not qualify. See IRS guidelines and Comfortmaker sales representatives for details.

Warranty information: Five-year limited No Hassle Replacement; five-year limited parts; lifetime limited heat exchangers. HELP® extended service agreement offers a five- and 10-year extended service agreement on parts and labor.

Special installation requirements: Shipped as natural gas in upflow configuration, with all parts included for downflow, horizontal-left and right with no need for accessory conversion kits. LP gas kits available.

Contact: Comfortmaker; attn John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.comfortmaker.com.

eProduct 184

Concord

Model: 2HP14L/B

Footprint (inches): 30 (w) by 30 (d) by 26 to 42 (h)

Serviceability features: Easy top removal, hinged access and control panels, 45-degree service valves with ease access and gauge attachment.

Technical support: Available 8 a.m.-4:30 p.m., Monday through Friday at 800-515-3501.

Technical support materials: Full technical support documentation available.

Noise-reduction features: Sound blanket kits and QuietShift™ capable.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with 13 SEER.

Additional features: Manufacturer did not specify.

Warranty information: Ten-year compressor, five-year parts.

Special installation requirements: TXV kit required to meet 14 SEER ARI rating.

Contact: Concord; attn Coushatta Fuller, 803-738-4114; 972-808-8450 (fax); coushatta.fuller@alliedair.com; www.alliedair.com.

eProduct 185

Daikin AC (Americas) Inc.

Model: FXOQ__MVJU with RXYMQ__MVJU VRV-S

Footprint (inches): 22 (w) by 15 (d) and 26 (w) by 20 (d)

Serviceability features: Easy access electrical box and refrigeration components. Automatic fault diagnostics and alerts.

Technical support: Application Engineering is available at 972-245-1510, 8 a.m.-5 p.m. Central. The technical/service hotline is available at 866-432-4546 (866-4DAIKIN) 24 hours a day.

Technical support materials: Complete engineering data manual, submittal data sheets, written guide specs, installation manual, owners/operation manual, service and troubleshooting manual, piping and wiring diagrams, and VRVXpress selection software.

Noise-reduction features: R4.2 insulation on FXOQ vertical air handler, inverter compressor and fan motors on RXYMQ outdoor unit for sound level of 58 dBA.

IAQ equipment supported: The FXOQ vertical air handler uses an electronic expansion valve to meter refrigerant flow and improve zone temperature control and dehumidification during part load. Filter rack included for application required filter selection.

Thermostat compatibility: Proprietary Daikin zone/centralized controllers but can connect to open protocol BMS solutions also.

Replacement parts compatibility: Mostly common parts.

Additional features: The first vertical (upflow) air handler for use with a single-phase VRF system in the U.S. means that multiple upflow air-handling units can be used in a residential or light commercial application, connected to a single system.

Warranty information: Standard one-year limited labor, one-year parts, six-year compressor.

Special installation requirements: For refrigerant metering, the FXOQ vertical air-handler unit must be installed in series to a BEQ flow metering box. The FXOQ vertical air handler is for upflow installations only.

Contact: Daikin AC (Americans) Inc.; attn Lee Smith, 972-245-1510; 972-245-1038 (fax); info@daikinac.com; www.daikinac.com.

eProduct 186

Ducane

Model: 2HP14L/B

Footprint (inches): 30 (w) by 30 (d) by 26 to 42 (h)

Serviceability features: Easy top removal, hinged access and control panels, 45-degree service valves with easy access and gauge attachment.

Technical support: Available 8 a.m.-4:30 p.m. Monday through Friday at 800-515-3501.

Technical support materials: Full technical support documentation available.

Noise-reduction features: Sound blanket kits and QuietShift™ capable.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with 13 SEER.

Additional features: Manufacturer did not specify.

Warranty information: Ten-year compressor, five-year parts.

Special installation requirements: TXV kit required to meet 14 SEER ARI rating.

Contact: Ducane; attn Coushatta Fuller, 803-738-4114; 972-808-8450 (fax); coushatta.fuller@alliedair.net; www.alliedair.com.

eProduct 187

EMI

Model: America Series multizone heat pump S2HA, T2HA, T3HA

Footprint (inches): Varies.

Serviceability features: Shipped with biflow solid-core filter-driers, suction accumulators on 9,000-, 12,000-, and 18,000-Btuh circuits, and suction line service port.

Technical support: Available Monday through Friday 8 a.m.-5 p.m. Eastern at 800-228-9364.

Technical support materials: Everything is available.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Standard thermostats.

Replacement parts compatibility: Shares common parts with other America Series condensers and heat pumps.

Additional features: Offers two to four independent zones within one cabinet with separate compressors and refrigerant circuits for each zone. Available with multiple indoor ductless air handler types, cassette, high wall, and universal (floor console or ceiling suspended).

Warranty information: One-year limited parts, five-years limited compressor with optional extended warranties available.

Special installation requirements: No special requirements for installation. Maximum separation is 100 equivalent feet, 35 feet maximum elevation difference.

Contact: EMI; attn Mark Odell, 800-228-9364; 800-232-9364 (fax); emi@enviromaster.com; www.enviromaster.com.

eProduct 188

Fedders

Model: APGE Series two-stage gas/electric packaged units

Footprint (inches): 47 (w) by 49 (d), height varies.

Serviceability features: Electrical and gas controls located behind one exterior panel for easy maintenance, Gauge ports standard on all models for more accurate reading of operating conditions while servicing. Internal filter rack. Self-diagnostic controller. Tubular heat exchanger.

Technical support: Available at 866-829-2440, Monday through Friday 7:30 a.m.-4:30 p.m. Central.

Technical support materials: Installation and operation manual, service manual, guide specs, exploded parts lists, wiring diagrams, spec sheets, and consumer guide.

Noise-reduction features: Insulated compartment to reduce sound levels. Variable-speed motors offer improved energy efficiency, low operating sound and enhanced air distribution. Aluminized-steel, multiport in-shot burners provide smooth ignition coupled with superior flame stability, low noise and reliability.

IAQ equipment supported: Internal filter rack. Control board provides low voltage terminals for easy installation of a whole house air cleaner or humidifier.

Thermostat compatibility: Single- or two-stage thermostat ready.

Replacement parts compatibility: Shares replacement parts.

Additional features: Units offer high-efficiency performance and a compact design. These units feature a variable-speed motor and two-stage heating, which provides installation flexibility and increased comfort. All models comply with California Energy Commission low NOx (an added cost option on competitors’ products).

Warranty information: Twenty-year limited heat exchanger, five-year limited compressor, five-year limited all other parts.

Special installation requirements: Thermostatic expansion valves on all models to control refrigerant flow. Systems can be installed on ground-level or rooftop, horizontal or down-flow applications. All models comply with California Energy Commission low NOx regulations.

Contact: Fedders; attn Kristen Perry, 908-604-8686, ext. 4278; 908-604-0715 (fax); kperry@fedders.com; www.fedders.com.

eProduct 189

Model: FV95A Series all-position furnace

Footprint (inches): FV95A0543A and FV95A0723A: 40 by 18 by 29; FV95A0905A: 40 by 21 by 29; FV95A1085A: 40 by 25 by 29.

Serviceability features: Built-in self diagnostics with fault code view; plug-type connections on the wiring harness; majority of the replacement parts are interchangeable; left- or right-side gas and electric entry; three-position inducer capability; easily removable front access panels.

Technical support: Available at 866-829-2440, Monday through Friday 7:30 a.m.-4:30 p.m. Central.

Technical support materials: Installation and operation manual, service manual, guide specs, exploded parts lists, wiring diagrams, spec sheets, and consumer guide.

Noise-reduction features: Isolated and insulated blower compartment to reduce sound levels. Variable-speed motors offer improved energy efficiency, low operating sound and enhanced air distribution. Aluminized-steel multiport in-shot burners provide smooth ignition coupled with superior flame stability, low noise and reliability.

IAQ equipment supported: Control board provides low voltage terminals for easy installation of a whole house air cleaner or humidifier.

Thermostat compatibility: Single- or two-stage thermostat ready.

Replacement parts compatibility: Majority of replacement parts are interchangeable.

Additional features: Among the smallest in the industry at just 40 inches tall, they accommodate the 13 SEER “A” coils for today’s more efficient air conditioners and the changing needs of home construction. All models comply with California low NOx (an added cost option on competitors’ products). The unique FV95A Series furnace enables four-position installation, offering unmatched installation flexibility.

Warranty information: Lifetime limited heat exchanger, five-year limited all other parts.

Special installation requirements: Designed for all-position installation: upflow, downflow and horizontal. All models comply with California Energy Commission low NOx regulations. Left or right side gas and electric inlet connections. Factory shipped for natural gas, with LP gas conversion kits available. Supports two-stage cooling units. Flush-fit coils available.

Contact: Fedders; attn Kristen Perry, 908-604-8686, ext. 4278; 908-604-0715 (fax); kperry@fedders.com; www.fedders.com.

eProduct 190

FHP Manufacturing Co.

Model: Aquarius AP heat pump

Footprint (inches): 26 by 33

Serviceability features: Units are serviceable from the front. Environmentally friendly and specifically designed for geothermal applications, the Aquarius uses the earth’s energy to heat and cool homes with savings up to 60 percent on utility bills when compared to conventional systems.

Technical support: Available at 954-776-5471, 8 a.m.-5 p.m. Eastern.

Technical support materials: Literature available in October 2007.

Noise-reduction features: Double insulated compressor base pan.

IAQ equipment supported: MERV-11 filtration, dehumidification mode. Single stage for closer temperature and humidity control.

Thermostat compatibility: A two- or three-stage heat pump thermostat is required.

Replacement parts compatibility: Commonality with other parts.

Additional features: The series is designed to have the overall highest efficiency on the market.

Warranty information: Parts only; 10-year refrigeration system, five-year all other parts.

Special installation requirements: None.

Contact: FHP Manufacturing Co.; attn Dave Bennett, 954-776-5471; 954-776-5529 (fax); dbennett@fhp-manufacturingcom; www.fhp-manufacturing.com.

eProduct 191

Friedrich Air Conditioning

Model: WallMaster thru-the-wall air conditioners with heat

Footprint (inches): Sleeve: 17 (h) by 27 (w) by 17 (d)

Serviceability features: Exact fit for 27-inch sleeves, including Fedders A and B (with baffle adapter kit). Easy-to-clean air filter.

Technical support: Available at 800-541-6645, 8 a.m.-4:30 p.m. Central.

Technical support materials: Operating manual, service manual.

Noise-reduction features: Vibration-isolating design; protective motor mount to prevent metal-on-metal contact; solid steel blower wheel housing; unique quiet airflow design; insulated plenum.

IAQ equipment supported: Up to 3.3 pints per hour of moisture removal (WE13B33B).

Thermostat compatibility: Comes with programmable wireless remote control.

Replacement parts compatibility: Some shared parts.

Additional features: The most energy efficient solid side thru-the-wall air conditioner of its size. Mounts flush with exterior wall for neat appearance. Ideal for thicker wall installations. Angled air discharge improves circulation for floor mounted installations. “MoneySaver” feature, “Smart Fan,” and auto-memory backup.

Warranty information: One-year parts, five-year compressor.

Special installation requirements: Installation into an existing Fedders B sleeve requires the use of a Friedrich baffle adapter kit “BAK” accessory.

Contact: Friedrich Air Conditioning; attn Bernadette Moody, 800-541-6645, ext. 494; hvac@friedrich.com; www.friedrich.com.

eProduct 192

Frigidaire

Model: DF6SE furnace

Footprint (inches): 56 by 47

Serviceability features: Externally accessible service ports provide quick access to refrigerant system without disrupting operation. Controls and other major components designed for “easy in and out” service.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagram, installation instructions, replacement parts list, technical sales literature, consumer sales literature.

Noise-reduction features: Compressor sound blanket, swept wing fan blade, ECM variable-speed motor.

IAQ equipment supported: ECM variable-speed motor provides increased comfort and improved air quality.

Thermostat compatibility: Special thermostat required.

Replacement parts compatibility: Maximum commonality with other Frigidaire products.

Additional features: This unit’s coil is double protected via a coated wire guard and a mesh hail guard. These features provide protection from balls, lawnmowers, hail, etc.

Warranty information: Ten-year limited residential all parts, 10-year “Quality Pledge” to replace entire unit if the heat exchanger or compressor fails in first 10 years of service. Extended labor protection plans are available.

Special installation requirements: Manufacturer did not specify.

Contact: Frigidaire; attn Jeff Gamache, 636-561-7548; 636-561-7399 (fax); gamachej@nordyne.com; www.frigidaire.net.

eProduct 193

Model: Q4SE packaged heat pump

Footprint (inches): 56 by 47

Serviceability features: Externally accessible service ports provide quick access to refrigerant system without disrupting operation. Controls and other major components designed for “easy in and out” service.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagram, installation instructions, replacement parts list, technical sales literature, consumer sales literature.

Noise-reduction features: Compressor sound blanket and ECM variable-speed motor.

IAQ equipment supported: ECM variable-speed motor provides increased comfort and improved air quality.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum commonality with other Frigidaire products.

Additional features: This unit’s coil is double protected via a coated wire guard and a mesh hail guard. These features provide protection from balls, lawnmowers, hail, etc.

Warranty information: Ten-year limited residential all parts, 10-year “Quality Pledge” to replace entire unit if the compressor fails. Extended labor protection plans are available.

Special installation requirements: Manufacturer did not specify.

Contact: Frigidaire; attn Jeff Gamache, 636-561-7548; 636-561-7399 (fax); gamachej@nordyne.com; www.frigidaire.net.

eProduct 194

Fujitsu General America

Model: Halcyon System 15 RLQ ductless heat pump

Footprint (inches): Indoor unit: 11 (h) by 31 (w) by 9 (d); Outdoor unit: 23 (h) by 31 (w) by 11 (d)

Serviceability features: LED lights on indoor unit display blinking light error codes and new optional wired remote control displays error codes in alpha numeric character for easier troubleshooting and diagnostics.

Technical support: Available at 866-952-8324, 9 a.m.-5 p.m. Eastern.

Technical support materials: Operation manual, installation manual, service manual, detailed specs available on Website.

Noise-reduction features: Up to 6 dB quieter on the indoor unit and up to 5 dB quieter on the outdoor unit.

IAQ equipment supported: Electronic plasma air cleaner.

Thermostat compatibility: Comes with programmable remote control.

Replacement parts compatibility: Replacement parts are shared.

Additional features: High SEER (20.0), electronic plasma air cleaner, environmentally friendly R-410A, wireless remote control, optional wired remote controller, 24-hour timer, dry mode, auto restart/reset, low ambient, over 30 percent smaller than competing units, making them easier to install in more locations

Warranty information: Two-year parts, six-year compressor.

Special installation requirements: None.

Contact: Fujitsu General America; attn Roy Kuczera, 973-575-0380; 973-836-0447 (fax); hvac@fujitsugeneral.com; www.fujitsugeneral.com.

eProduct 195

Model: Halcyon System 18RLQ ductless heat pump

Footprint (inches): 11 (h) by 31 (w) by 9 (d)

Serviceability features: LED lights on indoor unit display blinking light error codes and new optional wired remote control displays error codes in alpha numeric character for easier troubleshooting and diagnostics.

Technical support: Available at 866-952-8324, 9 a.m.-5 p.m. Eastern.

Technical support materials: Operation manual, installation manual, service manual, detailed specs available on Website.

Noise-reduction features: Up to 6 dB quieter on the indoor unit and up to 5 dB quieter on the outdoor unit.

IAQ equipment supported: Electronic plasma air cleaner.

Thermostat compatibility: Comes with programmable remote control.

Replacement parts compatibility: Replacement parts are shared.

Additional features: High SEER (19.0), electronic plasma air cleaner, environmentally friendly R-410A, wireless remote control, optional wired remote controller, 24-hour timer, dry mode, auto restart/reset, low ambient, over 30 percent smaller than competing units, making them easier to install in more locations.

Warranty information: Two-year parts, six-year compressor.

Special installation requirements: None.

Contact: Fujitsu General America; attn Roy Kuczera, 973-575-0380; 973-836-0447 (fax); hvac@fujitsugeneral.com; www.fujitsugeneral.com.

eProduct 196

Gibson

Model: DT4BE heat pump

Footprint (inches): 31 by 31

Serviceability features: Easy compressor and control access; five-minute, anti-short cycle protection; easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Dealers can log onto the Nordyne Website to gain access to technical literature, installation instructions, and wiring diagrams.

Noise-reduction features: One-piece top orifice and ECM outdoor motor provide quiet operation.

IAQ equipment supported: The optional variable-speed air handler provides enhanced dehumidification as well as constant airflow for improved indoor air quality. SEER rating also increases to 15.

Thermostat compatibility: Heat pump thermostat required.

Replacement parts compatibility: Shares replacement parts with other models in the line.

Additional features: This product has a full metal jacket that protects the unit from debris and features R-410A, which is environmentally friendly.

Warranty information: Ten-year limited all parts, one-year “Quality Pledge” replaces the outdoor unit if the compressor fails in the first year when installed with a matched indoor air handler or coil.

Special installation requirements: None.

Contact: Gibson; attn Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.nordyne.com.

eProduct 197

Model: KG6TE furnace

Footprint (inches): 28 (d) by 43 (h) by 14 to 23 (w)

Serviceability features: Diagnostics on the circuit board feature a flame signal indicator.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagrams, installation instructions, replacement parts list, technical sales literature, consumer sales literature.

Noise-reduction features: Fully insulated blower compartment and two-speed inducer.

IAQ equipment supported: All field-installed accessories include: Electronic air cleaners, ultraviolet light, humidifier, media air cleaner, HRV/ERV.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum commonality with other Gibson products.

Additional features: SmartLite™ integrated control board provides extended life to igniters in furnaces using hot surface ignition technology. SmartLite is programmed to learn the heat-up characteristics of the igniter, then adapt the ignition time to the characteristics of the furnace so the igniter is energized appropriately.

Warranty information: Ten-year limited residential all parts, 10-year “Quality Pledge” to replace the entire furnace if heat exchanger fails. Limited lifetime heat exchanger. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Gibson; attn Matt Lattanzi, 636-561-7469; 636-561-7399 (fax); lattanzim@nordyne.com; www.nordyne.com.

eProduct 198

Goodman Global

Model: ASZ18 heat pump

Footprint (inches): 36 by 36

Serviceability features: Features Copeland® ComfortAlert™ as well as service valves with ports. The heat pump is also equipped with four individual panels for coil access. In addition, the ASZ18 has a true suction line service port.

Technical support: Available 7 a.m.-7 p.m. Central, Monday through Friday at 888-593-9988. All support materials can be accessed through the partner link on www.goodmanmfg.com. Contact local distributor for full access information.

Technical support materials: ASZ18 spec sheet, installation manual, operations manual, technical manual, and service manuals.

Noise-reduction features: Features a high-density foam compressor sound blanket and Amana’s sound control top. In addition, the heat pump has a wire fan discharge grille and super-efficient two-speed condenser fan motor.

IAQ equipment supported: Two-stage cooling operation allows for better humidity control. In addition, the user is able to get improved use of the air filters because the heat pump is used with variable speed.

Thermostat compatibility: Compatible with most multistage thermostats.

Replacement parts compatibility: Shares many common components with the other Amana brand products.

Additional features: Features Copeland ComfortAlert diagnostics, two-speed General Electric condenser fan motor, and a lifetime unit replacement limited warranty.

Warranty information: Limited lifetime heat exchanger, 10-year limited unit replacement heat exchanger, 10-year limited parts.

Special installation requirements: Manufacturer did not specify.

Contact: Goodman Global; attn Rex Anderson, 713-263-5064; 713-589-8059 (fax); rex.anderson@goodmanmfg.com; www.amana-hac.com.

eProduct 199

Model: Dual Saver GMH95 furnace

Footprint (inches): 28 by 25

Serviceability features: Features a two-stage gas valve that allows the two-stage operation to be activated with the flip of a dipswitch. The control board stores the last five diagnostic codes in memory. Activated by a simple pushbutton switch, the fault history outputs to a flashing red LED.

Technical support: Available 7 a.m.-7 p.m. Central, Monday through Friday at 888-593-9988. All support materials can be accessed through the partner link on www.goodmanmfg.com. Contact local distributor for full access information.

Technical support materials: GMH95 spec sheet, installation manual, operations manual, technical manual, and service manuals.

Noise-reduction features: Features fully insulated, heavy-gauge steel cabinets with durable baked-enamel finish. The two-stage runs much quieter than a single-stage furnace.

IAQ equipment supported: The two-stage, low-velocity fan provides efficient air circulation and filtration throughout the home. The GMH95 is designed to minimize NOx emissions.

Thermostat compatibility: Compatible with single-stage thermostats.

Replacement parts compatibility: Shares many common components with other Goodman brand products.

Additional features: Features a patented aluminized steel tubular heat exchanger and stainless steel recuperative coil, is competitively priced against single-stage furnaces, and comes with a lifetime heat exchanger limited warranty and a 10-year furnace replacement limited warranty.

Warranty information: Limited lifetime heat exchanger, 10-year limited unit replacement heat exchanger, 10-year limited parts.

Special installation requirements: Manufacturer did not specify.

Contact: Goodman Global; attn Rex Anderson, 713-263-5064; 713-589-8059 (fax); rex.anderson@goodmanmfg.com; www.goodmanmfg.com.

eProduct 200

Heil

Model: PGX4 packaged gas/electric unit

Footprint (inches): 47 (w) by 47 to 73 (d)

Serviceability features: Externally mounted gauge ports allow for more accurate reading of operating conditions. Access panels and electrical controls located behind one exterior panel make servicing easy. Comfort Alert Ultratech™ diagnostics device on all models.

Technical support: A network of factory-trained Technical Service Advisors (TSAs), on staff at local distributors, provides technical assistance and troubleshooting.

Technical support materials: Product information posted online at Heil dealer Website, www.goheil.com, includes spec sheets, I&O manuals, and tech support/parts manuals (also available from local distributors).

Noise-reduction features: Equipped with advanced Air Management System for quieter operation.

IAQ equipment supported: Offers dehumidification in cooling mode.

Thermostat compatibility: Two-stage heat-cool thermostat required.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: This packaged gas/electric features environmentally sound R-410A, high-efficiency two-stage Copeland scroll compressors, corrosion-resistant heat exchangers made of tough stainless steel that has high-temperature capability. The condenser coils have sturdy wire inlet grilles and UV-rated vinyl mesh installed on the surface of the coils for extra protection.

Warranty information: Seven-year limited “No Hassle Replacement;” lifetime limited heat exchangers; 10-year limited compressor; seven-year limited coil; five-year limited parts. HELP® extended service agreement offers a five- and 10-year extended service agreement on parts and labor.

Special installation requirements: Manufacturer did not specify.

Contact: Heil; attn John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.heil-hvac.com.

eProduct 201

Model: QuietComfort™ DLX 95 furnace

Footprint (inches): 19 to 25 (w) by 29 (d)

Serviceability features: Comes equipped with a troubleshooting LED fault indicator that will diagnose practically all system related malfunctions, and it’s easy to view through sight glass in the blower door. Conventional gas valves come standard for easy replacement and troubleshooting. Control board mounting plate is modified for easy access while servicing.

Technical support: A network of factory-trained Technical Service Advisors (TSAs), on staff at local distributors, provides technical assistance and troubleshooting.

Technical support materials: Product information posted online at Heil dealer Website, www.goheil.com, includes spec sheets, I&O manuals, and tech support/parts manuals (also available from local distributors).

Noise-reduction features: The one-piece steel cabinet is thermal-lined for added sound protection. Solid doors provide a sealed combustion compartment for quieter operation.

IAQ equipment supported: Predrilled accessory holes and convenient wiring hook-ups make it easier to add humidifiers, electronic air cleaners and other accessories.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Equipped with silicon nitride igniters. All DLX 95 gas furnaces installed during 2006 and 2007 qualify for the $150 federal tax credit for 95-percent AFUE gas furnaces when installed in upflow orientations. Some horizontal installations may not qualify. See IRS guidelines and Heil sales representatives for details.

Warranty information: Five-year limited “No Hassle Replacement;” five-year limited parts; lifetime limited heat exchangers. HELP® extended service agreement offers a five- and 10-year extended service agreement on parts and labor.

Special installation requirements: Shipped as natural gas in upflow configuration, with all parts included for downflow, horizontal-left and right with no need for accessory conversion kits. LP gas kits available.

Contact: Heil; attn John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.heil-hvac.com.

eProduct 202

Islandaire

Model: EZ Series GS packaged terminal air conditioner with gas heat

Footprint (inches): 42 (w) by 16 (h) by 20 (d)

Serviceability features: Slide-out chassis moves forward into the room so that all major parts and systems are conveniently available for service or repair. Easily accessible heat exchanger. Standard, long-life air filter is removable for cleaning or washing.

Technical support: Available at 800-886-2759, ext. 146, 8 a.m.-5 p.m. Monday through Friday Eastern.

Technical support materials: I/O manual, spec sheets, and consumer guide.

Noise-reduction features: Through a combination of strategically placed vibration-isolating mounting blocks for the operating systems, insulated panels and the use of highly efficient component parts, the GS Series is an extremely quiet unit.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats and energy management systems.

Replacement parts compatibility: Shares replacement parts.

Additional features: The 42- by 16-inch size was designed for new construction and replacement applications in areas where efficient, energy-saving natural gas is the fuel source of choice. The GS Series is manufactured to meet the exact sleeve requirements of original wide line units, making replacement installation a snap. A central desk control system is optional.

Warranty information: One-year limited full parts and labor, five-year limited compressor and heat exchanger.

Special installation requirements: Extended sleeves must be used when wall is deeper than 12 inches.

Contact: Islandaire; attn Richard Nuss, 800-886-2759; 631-471-2913 (fax); sales@islandaire.com; www.islandaire.com.

eProduct 203

Kelvinator

Model: DT4BE heat pump

Footprint (inches): 31 by 31

Serviceability features: Easy compressor and control access; five-minute, anti-short cycle protection; easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Dealers can log onto the Nordyne Website to gain access to technical literature, installation instructions, and wiring diagrams.

Noise-reduction features: One-piece top orifice and ECM outdoor motor provide quiet operation.

IAQ equipment supported: The optional variable-speed air handler provides enhanced dehumidification as well as constant airflow for improved indoor air quality. SEER rating also increases to 15.

Thermostat compatibility: Heat pump thermostat required.

Replacement parts compatibility: Shares replacement parts with other models in the line.

Additional features: This product has a full, metal jacket that protects the unit from debris. This model features R-410A, which is environmentally friendly.

Warranty information: Ten-year limited all parts; one-year “Quality Pledge” replaces the outdoor unit if the compressor fails in the first year when installed with a matched indoor air handler or coil.

Special installation requirements: None.

Contact: Kelvinator; attn Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.nordyne.com.

eProduct 204  

Model: KG6TE furnace

Footprint (inches): 28 (d) by 43 (h) by 14 to 23 (w)

Serviceability features: Diagnostics on circuit board feature a flame signal indicator.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagrams, installation instructions, replacement parts list, technical sales literature, consumer sales literature.

Noise-reduction features: Fully insulated blower compartment and two-speed inducer.

IAQ equipment supported: All field-installed accessories include electronic air cleaners, ultraviolet light, humidifier, media air cleaner, HRV/ERV.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum commonality with other Kelvinator products.

Additional features: SmartLite integrated control board provides extended life to igniters in furnaces using hot surface ignition technology. SmartLite is programmed to learn the heat-up characteristics of the igniter, then adapt the ignition time to the characteristics of the furnace so the igniter is energized appropriately.

Warranty information: Ten-year limited residential all parts, 10-year “Quality Pledge” to replace the entire furnace if heat exchanger fails. Limited lifetime heat exchanger. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Kelvinator; attn Matt Lattanzi, 636-561-7469; 636-561-7399 (fax); lattanzim@nordyne.com; www.nordyne.com.

eProduct 205  

LDJ Manufacturing Inc.

Model: A-Maize-Ing Heat furnace, LDJ620-10

Footprint (inches): Furnace: 27 by 46; Biomass bin: 36 by 51

Serviceability features: Manufacturer did not specify.

Technical support: Available at 866-535-7667, 8 a.m.-5 p.m. Central.

Technical support materials: Dealer and consumer training videos, wiring diagrams, sequence of operations, I&O manual.

Noise-reduction features: None.

IAQ equipment supported: Biomass units do not produce any carbon monoxide.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Leading the biomass heating industry with UL-listed residential furnaces.

Warranty information: One-year parts, five-year burner and heat exchanger.

Special installation requirements: Must be installed with a 6-inch Class A chimney. Product is UL listed.

Contact: LDJ Manufacturing; attn Sales Manager, 866-535-7667; 641-620-8302 (fax); info@ldj-products.com; www.cornheat.com.

eProduct 206

Model: A-Maize-Ing Heat boiler, LDJ991-10

Footprint (inches): Boiler has 22-inch diameter; Biomass bin: 36 by 51

Serviceability features: Manufacturer did not specify.

Technical support: Available at 866-535-7667, 8 a.m.-5 p.m. Central.

Technical support materials: Dealer and consumer training videos, wiring diagrams, sequence of operations, I&O manual.

Noise-reduction features: None

IAQ equipment supported: Biomass units do not produce any carbon monoxide.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Leading the biomass industry with UL-listed residential boilers.

Warranty information: One-year parts, five-year burner and heat exchanger.

Special installation requirements: Must be installed with a 6-inch Class A chimney. Product is UL listed.

Contact: LDJ Manufacturing; attn Sales Manager, 866-535-7667; 641-620-8302 (fax); info@ldj-products.com; www.cornheat.com.

eProduct 207

Lennox

Model: Dave Lennox Signature® Collection, G60UHV/DFV furnace

Footprint (inches): 14 (w) by 17.5 (d) by 21 (h) or 24.5 (w) by 29 (d) by 40 (h)

Serviceability features: Contains a Surelight™ control board with nonvolatile self-diagnostics, which holds up to five trouble codes even if power is interrupted. A low-voltage circuit breaker provides an added level of component protection and simple service. The slide out blower provides convenient cleaning access. A nitride igniter provides dependable, robust operation.

Technical support: Available at 800-453-6669, 6:30 a.m.-6:30 p.m. Central.

Technical support materials: All information needed for installation and troubleshooting information is available in hard copy or online. Electronic and on-site technical training programs available.

Noise-reduction features: The quietest furnace in its class – four-and-one-half times quieter than the competition, says the company. It has a fully-insulated cabinet. With Silent Comfort technology, consumers can experience superior comfort without hearing the source.

IAQ equipment supported: Fully compatible with all Lennox Healthy Climate® IAQ accessories. Working in conjunction with a heat pump or cooling system, it can also provide both active and passive humidity control. The “fan-on” option provides ultra-low, continuous fan operation at two-thirds less cost than a traditional PSC motor. The G60V allows low cost continuous IAQ operation.

Thermostat compatibility: Compatible with one- or two-stage thermostats.

Replacement parts compatibility: Shares common components with the rest of the Lennox standard-efficiency gas furnace line.

Additional features: Has a rotatable inducer, which allows clean easy installation when converting from upflow to horizontal applications. All models meet the current electrical efficiency requirements and federal consumer tax credits are available. Four field-selectable blower profiles allow the dealer to fine-tune the furnace to the consumers’ specific comfort requirements and efficiency optimization.

Warranty information: Limited 10-year parts, limited lifetime heat exchanger. Extended warranties available.

Special installation requirements: The UHV models have a rotatable inducer, which allows simple venting, whether applied vertically or horizontally. DFV models have a top vent only. Left, right, or top vent connections allow greater installation flexibility. The G60V has left or right side gas and electrical connections. Downflow models (DFV) are also available. LP convertible. Return air bottom or sides.

Contact: Lennox; attn Ken Ely, 972-497-5010; 972-497-5254 (fax); ken.ely@lennoxind.com; www.lennox.com.

eProduct 208

Model: Dave Lennox Signature Collection, G61MPV

Footprint (inches): 18 to 25 (w) by 29 (d) by 40 (h)

Serviceability features: Surelight control board with nonvolatile self-diagnostics holds up to five trouble codes even if power is interrupted. Low voltage circuit breaker provides an added level of component protection and simple service. External trap for added safety, access and convenience. Slide-out blower for convenient cleaning access.

Technical support: Available at 800-453-6669, 6:30 a.m.-6:30 p.m. Central.

Technical support materials: All information needed for installation and troubleshooting information is available in hard copy or online. Electronic and on-site technical training programs available.

Noise-reduction features: It is the quietest furnace available – up to eight times quieter than the competition. With Silent Comfort technology, consumers can experience superior comfort without hearing the source. It also has a fully-insulated cabinet.

IAQ equipment supported: Fully compatible with all Lennox Healthy Climate IAQ accessories. Working in conjunction with a heat pump or cooling system can also provide both active and passive humidity control. The “fan-on” option provides ultra-low continuous fan operation at two-thirds less cost than a traditional PSC motor. The G61MPV allows low-cost, continuous IAQ operation.

Thermostat compatibility: Compatible with standard one or two-stage thermostats.

Replacement parts compatibility: Shares common components with the rest of the Lennox high-efficiency gas furnace line.

Additional features: A multiposition product, providing installation flexibility. Models up to 95-percent AFUE and models that meet the current electrical efficiency requirements and can provide the consumer with federal consumer tax credits. Four field-selectable blower profiles allow the dealer to fine-tune the furnace to the consumers’ specific comfort requirements and efficiency optimization.

Warranty information: Limited 10-year parts, limited lifetime heat exchanger.

Special installation requirements: Being a multiposition furnace, the G61MPV can be used for all installations without re-arranging or moving components. Furnace can be installed as either a one-pipe or two-pipe (direct vent) without conversion. Left or right side vent and combustion air connection provide an added level of application flexibility. Left or right side gas and electrical connections are possible.

Contact: Lennox; attn Ken Ely, 972-497-5010; 972-497-5254 (fax); ken.ely@lennoxind.com; www.lennox.com.

eProduct 209

Lochinvar Corp.

Model: Double Duty water and space heater

Footprint (inches): 22 to 26

Serviceability features: Features a double wall heat exchanger that separates heating fluid from domestic water and provides a visual alert should a leak occur in either tube.

Technical support: Available at technicalservice@lochinvar.com.

Technical support materials: Literature, as well as technical service e-mail and phone number available online.

Noise-reduction features: NonCFC foam insulation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Heats water for domestic use and stores it in a glass-lined storage tank, where the water transfers heat to a glass-coated heat exchanger. Within these tubes, water for space heating is circulated and heated. This internal heat transfer allows the Double Duty to provide hot water for domestic use while maintaining a comfortable space temperature through hydronic or radiant heating.

Warranty information: Ten-year limited tank and six-year parts.

Special installation requirements: Manufacturer did not specify.

Contact: Lochinvar; 615-889-8900; 615-547-1000; lochinvar@lochinvar.com; www.lochinvar.com.

eProduct 210

Luxaire

Model: Climasure™ GM9F furnace

Footprint (inches): 40 (h) by 29 (d)

Serviceability features: Easy to service and maintain, due to the redesign and relocation of many common serviceable parts. The control box is located in the front of the furnace, providing access to low voltage wiring installation. Blower service is simplified thanks to a relocated door switch, a capacitor moved to the blower housing, and a new vent blower connection.

Technical support: First level of support provided by distributor; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available 7 a.m.-6 p.m. Eastern.

Technical support materials: Luxaire Climasure high-efficiency gas furnace technical guide and consumer brochure.

Noise-reduction features: A new steel casing heat exchanger liner improves insulating performance for quieter operation.

IAQ equipment supported: Unit has a steel liner that can be easily cleaned.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Utilizes standard components and many are shared with similar models in the Luxaire furnace line-up.

Additional features: Provides 95-percent AFUE energy efficiency in an economical single-stage furnace design, making this product Energy Star rated and offering a Federal energy tax credit to save customers money.

Warranty information: Limited lifetime heat exchanger, five-year limited all other components. Performance Promise Plan™, an extended warranty is available with total parts-and-labor coverage on the system for up to 10 years.

Special installation requirements: Designed for residential and commercial installations in a basement, closet, alcove, recreation room or garage where the ambient temperature is above 30°F. They may be either side wall or thru-roof vented using approved plastic type combustion air and vent piping. Venting can be 1-pipe, 1 ½ pipe or 2-pipe sealed combustion.

Contact: Luxaire; attn Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.luxaire.com.

eProduct 211

Maytag

Model: PDF2SE furnace

Footprint (inches): 56 by 47

Serviceability features: Externally accessible service ports provide quick access to refrigerant system without disrupting operation. Controls and other major components designed with “easy in and out” service.

Technical support: Available at 866-262-9824 (866-2MAYTAG), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagram, installation instructions, replacement part list, technical sales literature, consumer sales literature.

Noise-reduction features: Compressor sound blanket, swept wing fan blade, and ECM variable-speed motor.

IAQ equipment supported: ECM variable-speed motor provides increased comfort and improved air quality.

Thermostat compatibility: Special thermostat required.

Replacement parts compatibility: Maximum commonality with other Maytag products.

Additional features: This unit’s coil is double protected via a coated wire guard and a mesh hail guard. These features provide protection from balls, lawnmowers, hail, etc.

Warranty information: Twelve-year limited residential all parts, 12 year “Dependability Promise” to replace entire unit if heat exchanger or compressor fails, limited lifetime heat exchanger. Extended labor protection plans are available.

Special installation requirements: Manufacturer did not specify.

Contact: Maytag; attn Jeff Gamache, 636-561-7548; 636-561-7399 (fax); gamachej@nordyne.com; www.maytaghvac.com.

eProduct 212  

Model: PGF1TE080CIQB furnace

Footprint (inches): 28 (d) by 43 (h) by 14 to 23 (w)

Serviceability features: Diagnostics on circuit board feature a flame signal indicator.

Technical support: Available at 866-262-9824 (866-2MAYTAG), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagram, installation instructions, replacement part list, technical sales literature, consumer sales literature.

Noise-reduction features: Fully insulated blower compartment and two-speed inducer.

IAQ equipment supported: Available field-installed accessories include: Electronic air cleaners, ultraviolet light, humidifier, media air cleaner, and HRV/ERV.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum compatibility with other Maytag products.

Additional features: The 95.1-percent AFUE “iQ Drive” furnace was developed for exclusive use with Maytag’s 23 SEER condensing units (PSA4BI*).

Warranty information: Twelve-year limited residential all parts, 12-year “Dependability Promise” to replace entire furnace if heat exchanger fails, limited lifetime heat exchanger. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Maytag; attn Matt Lattanzi, 636-561-7469; 636-561-7399 (fax); lattanzim@nordyne.com; www.maytaghvac.com.

eProduct 213

Mitsubishi Electric

Model: Mr. Slim P-Series Hyper-Heating ductless heat pump, PUZ-HA36

Footprint (inches): 37 (w) by 13 (d) by 53 (h)

Serviceability features: New hard-wired, multilingual remote controller (PAR-21MAA) displays fault codes for indoor and outdoor units, service contractor phone number and critical unit operating data for service technician. Convenient panel locations allow for easy access to serviceable components; reliable systems mean worry-free maintenance concerns.

Technical support: Available at 877-391-5550 8 a.m.-7 p.m. Eastern.

Technical support materials: Diagrams, troubleshooting FAQs, installation instructions, submittals and spec sheets all available at www.mehvac.com.

Noise-reduction features: The new design of the P-Series provides reduced outdoor unit sound level by four to eight dB(A); inverter-driven compressor much quieter due to rotation frequency modulation rather than conventional on/off banging sounds.

IAQ equipment supported: The indoor unit gives special consideration to IAQ including a special “dry” operating mode that helps control humidity, a ventilator air connection, and washable long-life air filters.

Thermostat compatibility: Mr. Slim® M- and P-Series products are shipped with thermostats.

Replacement parts compatibility: Shares most replacement parts with other P-Series models.

Additional features: The unit with its hyper-heating heat pump features full heating capacity while 4°F outside, as well as having the ability to connect two 218K Btuh units.

Warranty information: Limited warranty: six-year compressor; one-year parts and defects (two-year parts for factory trained Mitsubishi Diamond Dealers).

Special installation requirements: Four-way piping connection (four directions): Front, rear, right, bottom. New A-Control: Indoor unit is powered through the outdoor unit. Three polarity-sensitive wires plus ground conductor run from outdoor to indoor unit providing power and communication. Adapter is available to connect to the M-Net and CMCN plus system control via BMS.

Contact: Mitsubishi Electric; attn Barbara Renaud, 678-376-2868; 800-658-1458 (fax); brenaud@hvac.mea.com; www.mrslim.com.

eProduct 214

Modine Manufacturing Co.

Model: Hot Dawg® gas-fired unit heater

Footprint (inches): 36 (w) by 31 (d) by 22 (h)

Serviceability features: Installs easily with field wiring connections and knockouts for quick access to gas and electricity, along with a control panel located on the side of the unit.

Technical support: General information hotline available at 800-828-4328 (800-828-HEAT), 7 a.m.-5 p.m. Central, Monday through Friday.

Technical support materials: Visit www.modine.com/publications and click on CHVAC&R for available technical support materials such as: installation and service manuals, consumer literature, residential owners’ manuals and available options.

Noise-reduction features: One of the more common objections against propeller-equipped unit heaters is their excessive noise. Modine has acted on this concern and utilized a swept wing fan to reduce noise to industry-leading levels, says the company.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares many parts with the Hot Dawg 30,000- to 75,000-Btu units. There are some unique parts, however.

Additional features: Certified for both commercial and residential applications, the bent tube heat exchangers utilized in the entire Hot Dawg line have proven to be lightweight and extremely reliable. Used with natural or propane gas, the Hot Dawg is low profile, easily serviceable and backed by a 10-year heat-exchanger warranty.

Warranty information: Ten-year heat exchanger, two-year parts.

Special installation requirements: Contractors must follow clearance to combustibles and venting requirements as identified in the installation and service manual that accompanies each unit.

Contact: Modine Manufacturing Co.; attn Ray Schaeffart, 800-700-7324; 262-636-1665 (fax); hvac&r@na.modine.com; www.modine.com/hotdawg.

eProduct 215

Olsen

Model: Ultra Comfort G95V furnace

Footprint (inches): Varies.

Serviceability features: Control jumpers allow for easy field configuration of the ECM motor to meet any application. An on-board control with LED diagnostics allow for quick troubleshooting. Blower assembly is mounted on J rails for easy removal.

Technical support: Available at 800-228-9364, 8 a.m.-5 p.m. Eastern, Monday through Friday.

Technical support materials: All available.

Noise-reduction features: The blower compartment is insulated along with the burner section for sound attenuation and heat retention.

IAQ equipment supported: The unit’s control interfaces easily with other home comfort products, humidifier, and air cleaner.

Thermostat compatibility: Standard thermostat.

Replacement parts compatibility: Common parts with the single-stage products GTHB and GTHC.

Additional features: Maintains 95 percent AFUE in all four positions. The slide-out blower assembly is easily removable with simple plug-in connections and is mounted on sturdy rails that support the blower in all four positions. Long venting lengths and top, left and right venting options provides installation flexibility.

Warranty information: Limited Peace of Mind warranty means if there is a heat exchanger failure within the first five years, a new furnace will be supplied. Five-year limited replacement parts. Limited lifetime heat exchanger. An extended warranty option is available.

Special installation requirements: The G95V is a four-position natural gas or propane furnace. Knockouts are provided for all gas, electrical and venting connections. LED service lights and memory allow for quick diagnosis.

Contact: Olsen; attn Mark Odell, 315-797-1310; 315-797-3762 (fax); info@olsenhvac.com; www.olsenhvac.com.

eProduct 216

Peerless Boilers

Model: PRO Series boiler

Footprint (inches): 20 by 24 (largest)

Serviceability features: Energy Star-efficient, ETL design-certified; full front swing-out door provides easy access to combustion chamber area and flue passage for cleaning and servicing; rear flue outlet, rear supply and return connections; Honeywell operating controls (L7248C) with service switch; Beckett AFG burner (flame retention burner); and solid state burner control with pre- and post-purge.

Technical support: Available at 610-369-3208, 8 a.m.-4 p.m. Eastern, Monday through Friday. Also available www.peerlessboilers.com.

Technical support materials: CUT sheet, features and benefits, I&O manual can be downloaded at www.peerlessboilers.com.

Noise-reduction features: Optional burner cover - the cover will significantly reduce near-burner sound levels such as air-intake sound or minor component noise.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Temperature limit gauges and burners.

Additional features: Energy Star-efficient, three-pass, oil-fired, residential boiler; packaged hot water boiler constructed with cast iron sections and ready to install; factory tested and assembled with steel push nipples that provide a water-tight seal between sections. Unaffected by petroleum or other contaminants.

Warranty information: All residential cast iron boilers include a full one-year warranty. The PRO Series boilers have limited lifetime cast iron sections. Five- and 10-year extended warranties on parts and labor are also available. This summary is not a specific warranty. Consult manufacturer for complete details on cast iron boiler warranties.

Special installation requirements: Lightweight, small footprint allows installation in small spaces, easy to clean and service.

Contact: Peerless Boilers; 610-845-6130; 610-845-6121 (fax); marketing@peerlessboilers.com; www.peerlessboilers.com.

eProduct 217

Philco

Model: DT4BE heat pump

Footprint (inches): 31 by 31

Serviceability features: Easy compressor and control access; five-minute, anti-short cycle protection; easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Dealers can log onto the Nordyne Website to gain access to technical literature, installation instructions, and wiring diagrams.

Noise-reduction features: One-piece top orifice and ECM outdoor motor provide quiet operation.

IAQ equipment supported: The optional variable-speed air handler provides enhanced dehumidification as well as constant airflow for improved indoor air quality. SEER rating also increases to 15.

Thermostat compatibility: Heat pump thermostat required.

Replacement parts compatibility: Shares replacement parts with other models in the line.

Additional features: This product has a full, metal jacket that protects the unit from debris. This model features R-410A, which is environmentally friendly.

Warranty information: Ten-year limited all parts, one-year Quality Pledge replaces the outdoor unit if the compressor fails in the first year when installed with a matched indoor air handler or coil.

Special installation requirements: None.

Contact: Philco; attn Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.nordyne.com.

eProduct 218

Model: KG6TE furnace

Footprint (inches): 28 (d) by 43 (h) by 14 to 23 (w)

Serviceability features: Diagnostics on circuit board feature a flame signal indicator.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagrams, installation instructions, replacement parts list, technical sales literature, consumer sales literature.

Noise-reduction features: Fully insulated blower compartment and two-speed inducer.

IAQ equipment supported: Available field-installed accessories include: Electronic air cleaners, ultraviolet light, humidifier, media air cleaner, and HRV/ERV.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum compatibility with other Philco products.

Additional features: SmartLite integrated control board provides extended life to igniters in furnaces using hot surface ignition technology. SmartLite is programmed to learn the heat-up characteristics of the igniter, then adapt the ignition time to the characteristics of the furnace so the igniter is energized appropriately.

Warranty information: Ten-year limited residential all parts; 10-year Quality Pledge to replace the entire furnace if heat exchanger fails. Limited lifetime heat exchanger. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Philco; attn Matt Lattanzi, 636-561-7469; 636-561-7399 (fax); lattanzim@nordyne.com; www.nordyne.com.

eProduct 219  

Quietside

Model: QSHE-241 ductless heat pump

Footprint (inches): Indoor: 49 by 9 by 13; Outdoor: 35 by 13 by 33.

Serviceability features: Indoor unit shows fault codes. All components are easy to access.

Technical support: On the East Coast, available at 717-243-2535, 8 a.m.-5 p.m. Eastern; on the West Coast, available at 562-699-6066, 8 a.m.-5:30 p.m. Pacific time.

Technical support materials: Wiring diagrams, Quietside basic technical, Quietside 107.

Noise-reduction features: Compressor blanket.

IAQ equipment supported: Dual washable filters.

Thermostat compatibility: Wireless remote controller is provided.

Replacement parts compatibility: Some items common.

Additional features: Indoor unit is attractively styled, quiet, and easy to operate, outdoor unit is slim line to allow installation under decks, etc.

Warranty information: Five-year compressor, one-year parts, 90-day limited labor.

Special installation requirements: 208-/230-V power and control voltage, expansion device is in the outdoor unit, so both refrigerant lines must be insulated, flare connections.

Contact: Quietside; attn John Miles, 562-699-6066; 562-699-4351 (fax); johnm@quietside.com; www.quietside.com.

eProduct 220

Model: QVM9-090, QVM9-125, QVM9-150 dual purpose water heater

Footprint (inches): Wall hung: 36 (h) by 20 (w) by 10 (d)

Serviceability features: Self-diagnostic microprocessor will display fault codes as applicable to pinpoint the fault in the unit. All items are serviceable from the front. Many components have quick release connections, all electrical connections use quick connect plugs.

Technical support: On the East Coast, available at 717-243-2535, 8 a.m.-5 p.m. Eastern; on the West Coast, available at 562-699-6066, 8 a.m.-5:30 p.m. Pacific time.

Technical support materials: Quietside 105 guide, QVM9 troubleshooting guide, QVM9 installation manual, Website.

Noise-reduction features: None required.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Can be used in conjunction with zone valves and panels.

Replacement parts compatibility: Most parts are common.

Additional features: Ability to provide heating and DHW from the same unit. DHW is provided on demand and will be provided until call is required. Modulating gas valve allows the unit to adjust capacity to meet demand on the heating system.

Warranty information: One-year parts, limited lifetime main heat exchanger.

Special installation requirements: Majority of applications must be piped in a primary–secondary configuration. Unit is perfectly suited for radiant and fan coil applications, consult Quietside 105 for baseboard and radiator applications.

Contact: Quietside; attn John Miles, 562-699-6066; 562-699-4351 (fax); johnm@quietside.com; www.quietside.com.

eProduct 221

Rheem Heating and Cooling

Model: Prestige Series® RGPR Super Quiet 80 furnace

Footprint (inches): 34 (h) by 29 (d) by 18 to 25 (w)

Serviceability features: Lift-off door design allows for easy access and complete serviceability from the front of the unit. All components in this compact, 34-inch furnace are within clear sight and easy reach and can be removed from the front of the furnace.

Technical support: Available from Rheem distributors throughout North America, or at www.rheemote.net.

Technical support materials: Available from Rheem distributors throughout North America, or at www.rheemote.net.

Noise-reduction features: Model features solid doors, solid top plate, burner plate, fully insulated cabinet, efficient and quiet ECM motors, slow-open two-stage gas valve, and specially designed draft inducer motor, putting the Super-Quiet 80 two-stage at a level of quietest two-stage gas furnaces, said the company.

IAQ equipment supported: Features constant, cfm-capable, on-demand dehumidification; integrated control board with humidifier and electronic air cleaner hookups; and cleanable, permanent filter.

Thermostat compatibility: Compatible with single- or two-stage thermostat.

Replacement parts compatibility: Commonality among the Rheem furnace product family.

Additional features: The Super Quiet 80, equipped with an ECM, variable-speed blower plus dip switches, is designed to offer industry-leading sound levels, and helps provide customized consumer comfort year-round.

Warranty information: Five-year parts, 20-year heat exchanger.

Special installation requirements: High altitude and NOx models are available to meet local requirements. The 34-inch low profile design makes this Rheem furnace perfect for new construction, replacement, and retrofit applications with room to spare for cooling coils or IAQ accessories.

Contact: Rheem Heating and Cooling; attn Doug Borkman, 404-270-1010; 404-270-1020 (fax); dougb@spauldingcommunications.com; www.rheemac.com.

eProduct 222

Robur Corp.

Model: GAHP-AR reversible cycle gas-fired air-to-water heat pump

Footprint (inches): 34 by 49

Serviceability features: Units contain self-diagnostic microprocessor control for ease of maintenance and servicing. Complete with four digit LED readout to display supply and return water temperatures, diagnostic codes, unit parameters, and fault history.

Technical support: Available at 888-424-1800, 8 a.m.-5 p.m. Monday through Friday, except holidays, as well as through local representative.

Technical support materials: Product installation, start-up and maintenance manuals containing wire diagrams, diagnostic codes and service instructions.

Noise-reduction features: No mechanical compressors, so only noise is from variable-speed condenser fan.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Most parts are interchangeable.

Additional features: The first gas-fired reversible cycle air-to-water heat pump available and offers the highest gas fired heating efficiencies available to today’s market, said the company.

Warranty information: Up to five years when installed by a certified contractor.

Special installation requirements: Closed loop hydronic heating and cooling system requirements.

Contact: Robur Corp.; attn Richard Halbig, 888-424-1800; 812-422-5117 (fax); sales@robur.com; www.robur.com/us.

eProduct 223  

Model: GAHP-W-LB gas-fired water-to-water heat pump

Footprint (inches): 34 by 26

Serviceability features: Units contain self-diagnostic microprocessor control for ease of maintenance and servicing. Complete with four digit LED readout to display supply and return water temperatures, diagnostic codes, unit parameters, and fault history.

Technical support: Available at 888-424-1800, 8 a.m.-5 p.m. Monday through Friday, except holidays, as well as through local representative.

Technical support materials: Product installation, start-up and maintenance manuals containing wire diagrams, diagnostic codes and service instructions.

Noise-reduction features: No mechanical compressors, so unit noise is limited to hydraulic pump.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Most parts are interchangeable.

Additional features: The first gas-fired water-to-water heat pump available and offers the highest gas-fired heating efficiencies available in today’s market. System also allows for approximately 40 percent less geothermal field than its electric counterpart when used for heating only applications.

Warranty information: Up to five years when installed by a certified contractor.

Special installation requirements: Closed loop hydronic heating and cooling system requirements.

Contact: Robur Corp.; attn Richard Halbig, 888-424-1800; 812-422-5117 (fax); sales@robur.com; www.robur.com/us.

eProduct 224

Ruud

Model: Ruud Ultra Series® UGPR Super Quiet 80 furnace

Footprint (inches): 34 (h) by 29 (d) by 18 to 25 (w)

Serviceability features: Lift-off door design allows for easy access and complete serviceability from the front of the unit. All components in this compact, 34-inch furnace are within clear sight and easy reach and can be removed from the front of the furnace.

Technical support: Available from Ruud distributors throughout North America, or at www.rheemote.net.

Technical support materials: Available from Ruud distributors throughout North America, or at www.rheemote.net.

Noise-reduction features: Model features solid doors, solid top plate, burner plate, fully insulated cabinet, efficient and quiet ECM motors, slow-open two-stage gas valve, and specially designed draft inducer motor, putting the Super-Quiet 80 two-stage at a level of quietest two-stage gas furnaces, the company says.

IAQ equipment supported: Features constant, cfm-capable, on-demand dehumidification; integrated control board with humidifier and electronic air cleaner hookups; and cleanable, permanent filter.

Thermostat compatibility: Compatible with single- or two-stage thermostat.

Replacement parts compatibility: Commonality among the Rheem furnace product family.

Additional features: The Super Quiet 80, equipped with an ECM, variable-speed blower plus dip switches, is designed to offer industry-leading sound levels, and helps provide customized consumer comfort year-round.

Warranty information: Five-year parts, 20-year heat exchanger.

Special installation requirements: High altitude and NOx models are available to meet local requirements. The 34-inch low profile design makes this Rheem furnace perfect for new construction, replacement, and retrofit applications with room to spare for cooling coils or IAQ accessories.

Contact: Ruud; attn Doug Borkman, 404-270-1010; 404-270-1020 (fax); dougb@spauldingcommunications.com; www.rheemac.com.

eProduct 225  

Samsung

Model: AQV12BAN ductless heat pump

Footprint (inches): Indoor: 32 by 11 by 7; Outdoor; 28 by 21 by 10

Serviceability features: Unit is self diagnostic at both the indoor and outdoor units, with over 25 fault codes. All component access is quick and easy.

Technical support: On the East Coast, available at 717-243-2535, 8 a.m.-5 p.m. Eastern; on the West Coast, available at 562-699-6066, 8 a.m.-5:30 p.m. Pacific time.

Technical support materials: Wiring diagrams, installation and service manuals, Samsung basic technical.

Noise-reduction features: Compressor blanket.

IAQ equipment supported: Indoor unit has an built-in MPI ionizer to provide active reduction in bacteria and allergens in the air, deodorizing and electrostatic filters.

Thermostat compatibility: Wireless remote controller provided.

Replacement parts compatibility: Some common components.

Additional features: Inverter drive mini split with attractive mirror finish and slim line design on the indoor unit, MPI ionizer for indoor air quality, low noise levels on both indoor and outdoor units.

Warranty information: Five-year compressor, three-year parts, 120-day limited labor.

Special installation requirements: Communication signal between indoor and outdoor unit must be run in separate shielded wire, electronic expansion valve is located in outdoor unit so both refrigerant lines must be insulated, 5/ 1 6 -inch gauge access port.

Contact: Samsung; attn John Miles, 562-699-6066; 562-699-4351 (fax); johnm@quietside.com; www.quietside.com.

eProduct 226  

Sanyo Commercial Solutions

Model: Flexi-Multi C[L]M/KMS and CMH/KMHS

Footprint (inches): Outdoor: 13 by 36

Serviceability features: All units are designed to enable quick and easy servicing in the advent that a repair is needed.

Technical support: Available at 800-851-1235, 8:30 a.m.-5 p.m. Eastern.

Technical support materials: All manuals are readily available at www.sanyohvac.com.

Noise-reduction features: Quiet Mode enables user to reduce indoor fan speed for extra quiet operation, as low as 23 dBa.

IAQ equipment supported: Each indoor unit has a built-in negative ion generator for room freshening, an antimold filter, and a triple layered air clean Apatite filter to maintain a healthy and clean environment.

Thermostat compatibility: Requires the use of a Sanyo wireless remote control, which is included with each indoor unit.

Replacement parts compatibility: Shares parts.

Additional features: Gives the contractor versatility to meet the requirements of each job in that there are 213 combinations of matching indoor and outdoor units, which are available in both cooling-only and heat pump versions. Up to four indoor units can be connected to one outdoor unit.

Warranty information: Six-year compressor, one-year parts.

Special installation requirements: Only requires 3.5-inch hole to connect outdoor unit with each corresponding indoor unit.

Contact: Sanyo Commercial Solutions; attn Mike McMurrough, 678-355-6635; 678-355-6684 (fax); mmcmurrough@sss.sanyo.com; www.sanyohvac.com.

eProduct 227  

Tappan

Model: DF6SE furnace

Footprint (inches): 56 by 47

Serviceability features: Externally accessible service ports provide quick access to refrigerant system without disrupting operation. Controls and other major components designed for “easy in and out” service.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagram, installation instructions, replacement parts list, technical sales literature, consumer sales literature.

Noise-reduction features: Compressor sound blanket, swept wing fan blade, ECM variable-speed motor.

IAQ equipment supported: ECM variable-speed motor provides increased comfort and improved air quality.

Thermostat compatibility: Special thermostat required.

Replacement parts compatibility: Maximum commonality with other Tappan products.

Additional features: This unit’s coil is double protected via a coated wire guard and a mesh hail guard. These features provide protection from balls, lawnmowers, hail, etc.

Warranty information: Ten-year limited residential all parts, 10-year Quality Pledge to replace entire unit if the heat exchanger or compressor fails in first 10 years of service. Extended labor protection plans are available.

Special installation requirements: Manufacturer did not specify.

Contact: Tappan; attn Jeff Gamache, 636-561-7548; 636-561-7399 (fax); gamachej@nordyne.com; www.tappan.net.

eProduct 228

Model: DT4BE heat pump

Footprint (inches): 31 by 31

Serviceability features: Easy compressor and control access; five-minute, anti-short cycle protection; easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Dealers can log onto the Nordyne Website to gain access to technical literature, installation instructions, and wiring diagrams.

Noise-reduction features: One-piece top orifice and ECM outdoor motor provide quiet operation.

IAQ equipment supported: The optional variable-speed air handler provides enhanced dehumidification as well as constant airflow for improved indoor air quality. SEER rating also increases to 15.

Thermostat compatibility: Heat pump thermostat required.

Replacement parts compatibility: Shares replacement parts with other models in the line.

Additional features: This product has a full metal jacket that protects the unit from debris and features R-410A, which is environmentally friendly.

Warranty information: Ten-year limited all parts, one-year Quality Pledge replaces the outdoor unit if the compressor fails in the first year when installed with a matched indoor air handler or coil.

Special installation requirements: None.

Contact: Tappan; attn Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.tappan.net.

eProduct 229

Tempstar

Model: PDX4 packaged dual fuel heat pump

Footprint (inches): 47 (w) by 47 to 73 (d)

Serviceability features: Comfort Alert Ultratech diagnostics device on all models. Externally mounted gauge ports allow for more accurate reading of operating conditions. Access panels and electrical controls located behind one exterior panel make servicing easy.

Technical support: A network of factory-trained Technical Service Advisors (TSAs), on staff at local distributors, provides technical assistance and troubleshooting.

Technical support materials: Product information posted online at Tempstar dealer Website www.gotempstar.com includes spec sheets, I&O manuals, and tech support/parts manuals (also available from local distributors).

Noise-reduction features: Equipped with advanced Air Management system for quieter operation.

IAQ equipment supported: Offers dehumidification in cooling mode.

Thermostat compatibility: Two-stage heat-cool thermostat required.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Dual-fuel units monitor outdoor temperatures and switch automatically between electric power and fossil fuel to save homeowners money by using the more efficient fuel source. The heat pump features a new defrost system that helps keep coils ice-free for more efficient, reliable operation.

Warranty information: Ten-year No Hassle limited replacement; lifetime limited heat exchangers; 10-year limited compressor; 10-year limited coil; seven-year limited parts. HELP® extended service agreement offers a five- and 10-year extended service agreement on parts and labor.

Special installation requirements: Must be installed with a dual-fuel thermostat in order to operate properly.

Contact: Tempstar; attn John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.tempstar.com.

eProduct 230  

Model: SmartComfort™ VS 90 furnace

Footprint (inches): 19 to 25 (w) by 29 (d)

Serviceability features: These low-profile furnaces are designed with easy-to-remove doors and extra-spacious service compartments to give technicians room to work. Furnace includes a built-in electronic diagnostic system that can be used even while the furnace is running. Most hose and clamp connections are premade by the factory, substantially reducing installation time.

Technical support: A network of factory-trained Technical Service Advisors (TSAs), on staff at local distributors, provides technical assistance and troubleshooting.

Technical support materials: Product information posted online at Tempstar dealer Website www.gotempstar.com includes spec sheets, I&O manuals, and tech support/parts manuals (also available from local distributors).

Noise-reduction features: The unit has two-stage heating, which means it operates in the quieter first stage 70 to 80 percent of the time. The one-piece steel cabinet is thermal-lined and an insulated blower compartment provides added sound protection. Solid doors provide a sealed combustion compartment for quiet operation.

IAQ equipment supported: Predrilled accessory holes and convenient wiring hook-ups make it easier to add humidifiers, electronic air cleaners and other accessories.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: High-efficiency variable-speed blower motor cuts electricity costs. Furnace is equipped with silicon nitride igniters that last longer, can withstand high-line voltage, and don’t require voltage regulators. Troubleshooting LED fault indicator that diagnoses practically all system-related malfunctions is easy to view through sight glass in blower door.

Warranty information: Ten-year No Hassle limited replacement; lifetime limited heat exchangers; seven-year limited parts. HELP® extended service agreement offers a five- and 10-year extended service agreement on parts and labor.

Special installation requirements: Shipped as natural gas in upflow configuration, with all parts included for downflow, horizontal-left and right with no need for accessory conversion kits. LP gas kits available.

Contact: Tempstar; attn John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.tempstar.com.

eProduct 231  

ThermoPride

Model: Heat pump

Footprint (inches): 27 by 27 up to 29 by 30

Serviceability features: Easy access connections. Unique jacket doesn’t fade, chip, or dent.

Technical support: Available during standard Central business hours at 574-896-2133.

Technical support materials: Wiring diagrams, service and troubleshooting information, installation data, parts and part numbers are all available in I&O manual.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares parts.

Additional features: Unique ABS cabinet doesn’t fade, chip, or dent. Also resists corrosion, so it is perfect for coastal applications.

Warranty information: Ten-year compressor, five-year coil, five-year parts. Extended parts and labor warranties available.

Special installation requirements: Manufacturer did not specify.

Contact: ThermoPride; 574-896-2133; 574-896-5301 (fax); tpmarketing@thermopride.com; www.thermopride.com.

eProduct 232

Model: OPB furnace and air conditioner

Footprint (inches): 2 to 3 ton: 47 by 47; 3.5 to 5 ton: 64 by 48

Serviceability features: Everything located outside home for quiet operation and easy service. All service can be done from one convenient service panel.

Technical support: Available during standard Central business hours at 574-896-2133.

Technical support materials: Wiring diagrams, troubleshooting, installation instructions, and parts are included in I&O manual.

Noise-reduction features: Insulated blower compartment, engineered fan.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares parts.

Additional features: Outdoor packaged oil-fired furnace and central air conditioner can be installed at ground level. Larger models can also be installed on a rooftop.

Warranty information: Lifetime limited heat exchanger, 10-year compressor. Transferable to subsequent homeowners. Five-year parts. Optional five-year labor and option to extend to 10-year labor and parts.

Special installation requirements: 3.5 to 5 ton units need duct transition kit and rooftop frame kit for rooftop installation.

Contact: ThermoPride; 574-896-2133; 574-896-5301 (fax); tpmarketing@thermopride.com; www.thermopride.com.

eProduct 233  

Trane

Model: XL16c packaged gas/electric unit

Footprint (inches): 38 (h) by 51 (w) by 43 (d)

Serviceability features: Locating critical components is easy with independently removable embossed service panels. System controls, stainless steel burners and straight in gas line are easily accessible. The slide out Vortica blower is mounted by a single fastener. Secured with rotolock fittings, the Climatuff compressor is conveniently located in the left corner compartment.

Technical support: Contact local Trane distributor.

Technical support materials: Installation and service information, including parts numbers, is readily available to Trane distributors and their independent dealers.

Noise-reduction features: The quietest unit at every tonnage, with sound levels as low as 70 dB. The variable-speed blower fan motor and exclusive Comfort-R controls eliminate noisy start up and shut down. Super quiet high-efficiency ducted fan moves air with a sophisticated aerodynamic blade for the quietest performance on the market.

IAQ equipment supported: Features include the FreshEffects ERV, which removes stale indoor air and replaces it with an equal amount of fresh outdoor air. Motorized and manual fresh air dampers and economizers can provide up to 25 percent fresh air to the conditioned space. Available humidifiers prevent dryness and reduce static electricity.

Thermostat compatibility: Compatible with many thermostats, but Trane markets its own branded comfort controls.

Replacement parts compatibility: Majority of replacement parts are shared with other models in the line.

Additional features: With some of the highest SEER ratings for packaged gas/electric systems in the industry, the Trane XL16c is ideal for customers looking to save on energy costs and enjoy total comfort all season long. Customers won’t find a quieter, better built packaged unit on the market, says the company.

Warranty information: Twenty-year heat exchanger, 10-year compressor and condenser coil, five-year parts.

Special installation requirements: Easily converted for horizontal or vertical applications; factory built 12- and 18-inch duct covers for extra-clean, horizontal installation; panhead screws on supply and return panel for flush-fit duct connections; easy electrical and gas connections on the right side.

Contact: Trane; attn Yvonne Deese, 903-581-3033; 903-579-7835 (fax); yvonne.deese@trane.com; www.trane.com.

eProduct 234  

Model: XV 95 furnace

Footprint (inches): 3 ton: 40 (h) by 18 (w) by 28 (d)

Serviceability features: Self-diagnostic controls for easy servicing. Quarter-turn blower door latches on upflow models. Compatible with higher SEER outdoor units.

Technical support: Contact local Trane distributor.

Technical support materials: Supporting installation and service information including part numbers are readily available to Trane distributors and their independent dealers.

Noise-reduction features: The variable-speed blower motor eliminates noisy start up and shut down and the heavy steel insulated cabinet, variable-speed draft inducer, sealed burner compartment and automotive-grade gaskets reduce operating sound.

IAQ equipment supported: Comfort-R provides superior humidity control, creating improved air quality and enhanced comfort. When paired with Trane CleanEffects, the system removes up to 99.98 percent of airborne allergens from the filtered air.

Thermostat compatibility: Compatible with many thermostats, but Trane markets its own branded thermostats.

Replacement parts compatibility: Shares replacement parts with other models in the line.

Additional features: The efficient variable-speed gas furnace delivers an unprecedented 96.7 percent AFUE rating.

Warranty information: Lifetime limited primary and secondary heat exchangers, five-year limited internal functional parts. If the furnace is installed at the same time as a new XLi outdoor condensing unit, internal functional parts will be covered for 10 years as part of the outdoor unit system warranty.

Special installation requirements: Air cleaner and humidifier compatible; upflow/horizontal left; downflow/horizontal right; left/right gas and electric hookups.

Contact: Trane; attn Yvonne Deese, 903-581-3033; 903-579-7835 (fax); yvonne.deese@trane.com; www.trane.com.

eProduct 235

Unico

Model: Unichiller RC reverse cycle chiller

Footprint (inches): 18 (d) by 38 (w) by 46 (h)

Serviceability features: Comes precharged with the choice of refrigerant and no refrigeration work is needed at the jobsite. Simply run water and electric to the Unichiller RC and heating and cooling can begin. Factory tested performance. The Unichiller RC provides the ultimate in reliability.

Technical support: Available via Website at www.unicosytem.com/productmanual and live person 7 a.m.-7 p.m. Central, Monday through Friday. Repeat chiller purchasers are in receipt of a cell number for off hours and weekends.

Technical support materials: All details on technical, specs and piping are available at www.unicosystem.com/productmanual. Consumer and sales literature available at www.unicosystem.com/lit. Customer service is also available at 800-527-0896.

Noise-reduction features: Compressor is in its own enclosed cabinet. Use of two condenser fans for quieter operation.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with all thermostats.

Replacement parts compatibility: Replacement parts are available through Unico Inc. and its local distributors. Parts can be shipped anywhere in the continental US within 24 hours of order.

Additional features: Utilizes water as the medium to provide heating and cooling to homes, offices, light industrial, and manufacturing process lines. There are no CFCs in the form of Freon in the structure being conditioned - only water. Safer, ecologically superior, and quieter, the Unichiller RC does more than a conventional condensing unit while providing the properly heated or cooled water for the structure.

Warranty information: Standard unconditional one-year parts. Certified Unico contractors can extend an unconditional five-year parts to the end user. Five-year compressor from the date of installation.

Special installation requirements: Training is recommended when installing the Unichiller RC. Find all details at www.unicosystem.com/training.

Contact: Unico; attn Shawn Intagliata, 800-527-0896; 314-457-9000 (fax); shawn@unicosystem.com; www.unicosystem.com.

eProduct 236

WaterFurnace International

Model: NDV038 geothermal heat pump

Footprint (inches): 2 to 2.5 ton: 19 (h) by 23 (w) by 63 (d); 3 ton: 21 (h) by 26 (w) by 72 (d); 3.5 to 4 ton: 21 (h) by 26 (w) by 77 (d); 5 to 6 ton 21 (h) by 26 (w) by 82 (d)

Serviceability features: Designed with the service technician in mind, the Envision Series line features hinged doors for easy access to system components, field-adjustable filter racks, status lights on the front of the unit for easy field service, and onboard diagnostics to help technicians get it right every time.

Technical support: Dealer line is available at 888-929-2837 8 a.m.-5 p.m. Eastern.

Technical support materials: Specification catalogue SP1585, installation manual IM1585, Envision quick reference guide QR1585, Envision troubleshooting guide WFS383.

Noise-reduction features: Whisper-quiet operation through innovative design and premium components. Models come with quiet running two-speed scroll compressors, mounted on double-isolation plates made of acoustic metal. The compressor includes a compressor blanket to provide superior noise reduction. In addition, cabinets are fully insulated making them even quieter. Since units are located indoors, it allows homeowners to get rid of their unsightly and noisy outdoor condensing units.

IAQ equipment supported: Offers impressive dehumidification and filtration capabilities. A two-speed scroll compressor provides longer run times, increasing air exchanges through the filtration system. Plus, units come with a standard MERV 11 air filter, which provides a large surface area, allowing for superior IAQ.

Thermostat compatibility: Compatible with all three-heat/2-cool thermostats.

Replacement parts compatibility: Shares many replacement parts amongst the models within its product series.

Additional features: The most efficient heating and cooling system ever rated by ARI in category 13256-1 (GLHP). In addition, the Envision Series offers the most extensive warranty and the shortest product lead time in the industry, says the company.

Warranty information: Ten-year parts and labor allowance.

Special installation requirements: Manufacturer did not specify.

Contact: WaterFurnace International; attn Ryan Stauffer, 260-478-5667, ext, 3262; 800-783-5667 (fax); ryan.stauffer@waterfurnace.com; www.waterfurnace.com.

eProduct 237

Model: Envision Split NDZ038 geothermal heat pump

Footprint (inches): 2 to 2.5 ton: 19 (h) by 23 (w) by 27 (d); 3 to 6 ton: 21 (h) by 26 (w) by 32 (d)

Serviceability features: Designed with the service technician in mind, the Envision Split features hinged doors for easy access to system components, status lights on the front of the unit for easy service diagnostics, a ComfortAlert control module that signals compressor faults to the thermostat, and onboard diagnostics to help technicians get it right every time.

Technical support: Dealer line is available at 888-929-2837, 8 a.m.-5 p.m. Eastern.

Technical support materials: Specification catalogue SP1592, installation manual IM1592, Envision quick reference guide QR1585, Envision troubleshooting guide WFS383.

Noise-reduction features: Achieves whisper-quiet operation through innovative design and premium components. Models come with quiet running two-speed scroll compressors, mounted on double-isolation plates made of acoustic metal. The compressor includes a compressor blanket to provide superior noise reduction. In addition, cabinets are fully insulated making them even quieter. Since units are located indoors, it allows homeowners to get rid of their unsightly and noisy outdoor condensing units.

IAQ equipment supported: Offers impressive dehumidification and filtration capabilities. Its two-speed scroll compressor allows for longer run-times increasing air exchanges through the filtration system.

Thermostat compatibility: Compatible with all three-heat/two-cool thermostats.

Replacement parts compatibility: Shares many replacement parts amongst the models within its product series.

Additional features: The most efficient split heating and cooling system ever rated by ARI in category 13256-1 (GLHP). In addition, an Envision Split unit comes with an extensive warranty and has a short product lead time.

Warranty information: Ten-year parts and labor allowance.

Special installation requirements: Manufacturer did not specify.

Contact: WaterFurnace International; attn Ryan Stauffer, 260-478-5667, ext, 3262; 800-783-5667 (fax); ryan.stauffer@waterfurnace.com; www.waterfurnace.com.

eProduct 238  

Westinghouse

Model: DF6SE furnace

Footprint (inches): 56 by 47

Serviceability features: Externally accessible service ports provide quick access to refrigerant system without disrupting operation. Controls and other major components designed for “easy in and out” service.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagram, installation instructions, replacement parts list, technical sales literature, consumer sales literature.

Noise-reduction features: Compressor sound blanket, swept wing fan blade, ECM variable-speed motor.

IAQ equipment supported: ECM variable-speed motor provides increased comfort and improved air quality.

Thermostat compatibility: Special thermostat required.

Replacement parts compatibility: Maximum commonality with other Westinghouse products.

Additional features: This unit’s coil is double protected via a coated wire guard and a mesh hail guard. These features provide protection from balls, lawnmowers, hail, etc.

Warranty information: Ten-year limited residential all parts, 10-year Quality Pledge to replace entire unit if the heat exchanger or compressor fails in first 10 years of service. Extended labor protection plans are available.

Special installation requirements: Manufacturer did not specify.

Contact: Westinghouse; attn Jeff Gamache, 636-561-7548; 636-561-7399 (fax); gamachej@nordyne.com; www.westinghousehvac.com.

eProduct 239

Model: FG6TE080CIQB gas furnace

Footprint (inches): 28 (d) by 43 (h) by 14 to 23 (w)

Serviceability features: Diagnostics on circuit board feature a flame signal indicator.

Technical support: Available at 800-422-4328 (800-4AC-HEAT), 8 a.m.-4:30 p.m. Central.

Technical support materials: Wiring diagram, installation instructions, replacement part list, technical sales literature, consumer sales literature.

Noise-reduction features: Fully insulated blower compartment and two-speed inducer.

IAQ equipment supported: Available field-installed accessories include: Electronic air cleaners, ultraviolet light, humidifier, media air cleaner, and HRV/ERV.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum compatibility with other Westinghouse products.

Additional features: The 95.1-percent AFUE iQ Drive furnace was developed for exclusive use with Westinghouse’s 23 SEER condensing units (FS4BI*).

Warranty information: Ten-year limited residential all parts, 10-year “Quality Pledge” to replace entire furnace if heat exchanger fails, limited lifetime heat exchanger. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Westinghouse; attn Matt Lattanzi, 636-561-7469; 636-561-7399 (fax); lattanzim@nordyne.com; www.westinghousehvac.com.

eProduct 240  

Whirlpool Corp./Tradewinds

Model: W4PG436A068A gas/electric packaged unit

Footprint (inches): 37 by 65

Serviceability features: Packaged units are easy to service. All controls are easy to access, insight and accessible by removing side panels.

Technical support: Manufacturer did not specify.

Technical support materials: Technical publications such as specs, I&O manuals with troubleshooting charts, and parts lists with drawings are available from the distributors or directly on the Whirlpool Gold™ dealer Website.

Noise-reduction features: Furnace cabinets are fully insulated for sound attenuation and insulation.

IAQ equipment supported: Provides high static blowers to accommodate high-efficiency filtration systems.

Thermostat compatibility: Operates with a thermostat designed for one-stage cooling and two-stage heating.

Replacement parts compatibility: Shares many replacement parts with other models of Whirlpool gas/electric packaged units.

Additional features: Units have Copeland scroll compressors and provide many years of reliable performance.

Warranty information: Standard five-year parts, 20-year limited heat exchanger.

Special installation requirements: All installation requirements are listed in the installation and operating instructions. Units can be installed as a horizontal or down discharge configuration.

Contact: Whirlpool Corp./Tradewinds; attn Larry Pittman, 904-407-4470; 904-407-8470 (fax); lpittman@tradewindshvac.net; www.whirlpoolhvac.com.

eProduct 241

Model: WGFET080C16 furnace

Footprint (inches): 21 by 29

Serviceability features: Serviced from the front of the cabinet by removing either of the two panels. All controls are in sight for easy access.

Technical support: Manufacturer did not specify.

Technical support materials: Technical publications such as specs, I&O manuals with troubleshooting charts, and parts lists with drawings are available through the distributor or on the Whirlpool Gold dealer Website.

Noise-reduction features: Furnace cabinets are fully insulated for sound attenuation and insulation.

IAQ equipment supported: Furnace provides excellent fuel efficiency while being capable of supporting popular indoor air quality installed devices such as UV lights, electronic air cleaners, and humidifiers from the furnace control board.

Thermostat compatibility: Operates with either a single- or two-stage thermostat.

Replacement parts compatibility: Shares many replacement parts with other Whirlpool Gold furnace models.

Additional features: Furnace has stainless steel, primary and secondary heat exchangers and provides many years of reliable performance.

Warranty information: Standard five-year parts and limited lifetime heat exchanger. Whirlpool Gold gas furnaces are covered by the HomeWise® HVAC Limited Warranty, which provides a replacement furnace if a furnace heat exchanger fails within the first five years following installation.

Special installation requirements: All installation requirements are listed in the installation and operating instructions. The furnace can be vented using Schedule 40 PVC in a one- or two-pipe vent configuration.

Contact: Whirlpool Corp./Tradewinds; attn Larry Pittman, 904-407-4470; 904-407-8470 (fax); lpittman@tradewindshvac.net; www.whirlpoolhvac.com.

eProduct 242

York

Model: Latitude™ GY9F furnace

Footprint (inches): 40 (h) by 29 (d)

Serviceability features: Easy to service and maintain, due to the redesign and relocation of many common serviceable parts. The control box is located in the front of the furnace, providing access to low voltage wiring installation. Blower service is simplified thanks to a relocated door switch, a capacitor moved to the blower housing, and a new vent blower connection.

Technical support: First level of support provided by distributor; factory support available to distributors and dealers at 877-874-7378 (877-UPG-SERV). Support is available 7 a.m.-6 p.m. Eastern.

Technical support materials: York high-efficiency gas furnace technical guide and consumer brochure.

Noise-reduction features: A new steel casing heat exchanger liner improves insulating performance for quieter operation.

IAQ equipment supported: The unit has a steel liner that can be easily cleaned.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Utilizes standard components and many are shared with similar models in the York furnace line-up.

Additional features: Provides 95 percent AFUE energy efficiency in an economical single-stage furnace design, making this product Energy Star rated and offering a federal energy tax credit to save customers money.

Warranty information: Twenty-year limited heat exchanger, five-year limited parts all other components. YorkCare™, an extended warranty, is available with total parts-and-labor coverage on the system for up to 10 years.

Special installation requirements: Designed for residential and commercial installations in a basement, closet, alcove, recreation room, or garage where the ambient temperature is above 30°F. They may be either side wall or through-the-roof vented using approved plastic type combustion air and vent piping. Venting can be 1-pipe, 1 ½ pipe or 2-pipe sealed combustion.

Contact: York; attn Mickey Smith, 405-419-6541; 405-419-6545 (fax); mickey.s.smith@jci.com; www.yorkupg.com.

eProduct 243

Publication date: 09/17/2007  

Links

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

2014 MCAA Annual Convention

Scenes from the 2014 MCAA Annual Convention in Scottsdale, Ariz.

Podcasts

NEWSmakers: Julian Scadden

Training is an ongoing process. Julian will discuss how you can generate maximum return on time and energy invested training by following a three part process. Listen to this podcast to get expert tips on training, tracking and follow up. 

More Podcasts

ACHRNEWS

NEWS 04-21-14 cover

2014 April 21

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe

SERVICE CALLS POLL

Which statement on service calls best applies to your business?
View Results Poll Archive

HVACR INDUSTRY STORE

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

 

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

DON'T MISS A THING

Magazine image
 
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

STAY CONNECTED

facebook icontwitter iconyoutube iconLinkedIn i con