Is There Room for the One-Man Shop?

July 26, 2010
/ Print / Reprints /
ShareMore
/ Text Size+
Scott Zalucha, president of Precision Comfort Heating & Cooling, handles all the installation and repair details of every job.


From hero to hack, the HVACR industry and its customers hold varying opinions about the one-man shop. Some find these business entities to be trustworthy necessities while others consider them as black marks on the trade’s reputation. Find the balance in between and the industry just may have found where the one-man shop fits.

Enter Scott Zalucha who is president of Precision Comfort Heating & Cooling; a one-man shop based in Warren, Mich. He is committed to the trade, his business, and doing a better job than anyone else. Holding multiple certifications, including North American Technician Excellence (NATE), Zalucha has been in HVACR since 1988. He began his own start-up business in 2004.

“I got tired of other people calling the shots,” he explained. “The long hours are difficult, but the growth has been good. I feel like I am building a great company.”

Despite his success, there are challenges and limitations that Zalucha and every other one-man shop must deal with in day-to-day business. Arguably, this is true for every size contractor, but it still doesn’t answer the question, “Is there room in the HVACR industry for the one-man shop?” Talking to other contractors from various sizes of business, the answer wasn’t as clear cut as expected.

YES AND NO

“There is always room for the one-man shop in the HVACR industry,” said Aaron York Sr., founder of Aaron York’s Quality Air in Indianapolis. “But there is never room for the one-man rip-off artist.”

That is a consensus among customers and contractors alike. Reputable one-man shops and larger contracting companies agree; fly-by-night operations aren’t acceptable. What they often don’t agree on is the role that the one-man shop should play or if they are capable of keeping up with demand.

Drew Cameron, owner and president of HVAC Sellutions, a consulting firm, feels the one-man business is only meant to play the service and maintenance role.

“I think they can continue to facilitate a service and maintenance role, but their ability to do installations properly and completely with necessary proper duct and equipment sizing, duct cleaning, duct sealing, duct modifications, and other whole house solutions are lacking, as are their skills to be able to properly educate homeowners on the virtues of energy management, IAQ, and whole house performance along with more advanced solar, wind, and geothermal options.”

As owner of a one man shop, Scott Zalucha, president of Precision Comfort Heating & Cooling, understands that long hours are a part of his everyday life.

Larry Taylor, president of AirRite Air Conditioning Co. Inc. in Forth Worth, Texas, takes Cameron’s description a bit further. According to him, the small company is suited to provide basic hot or cold air to the customer. His concern, however, is that they won’t have the time to stay up with current trends.

“The small contractor, in a lot of cases, is the owner of a job and not a business.”

Beyond the one-man shop’s role, questions about meeting customer demand need to be answered. Karl Roth Jr., CEO of A.N. Roth Co. LLC, in Louisville, Ky., doesn’t think that one person can deliver the level of customer service that today’s customers require.

“I am finding that those who try become burned out after a couple of years,” he said. “They may have less employee problems, but they are always on call.”

Despite the increased demand, David Hutchins, president and owner of Bay Area A/C in Crystal River and New Port Richey, Fla., pointed out that there are many new tools that make it possible for the one-man shop to do more now than in years past.

“There is so much automated in the industry, parts ordering, manuals on the Internet, etc. A one-man shop can accomplish so much more,” he said. “The small shop will always have personal connections that will support them, their family, and maximize their profits. They can choose to grow, but it isn’t required. Owners that started as a one-man shop need to respect that decision when it’s made by one of their co-workers.”

If Zalucha can’t get to a customer, he lets them know up front. Pressed for time, he still takes the time to do the job correctly as he fits a piece of sheet metal and installs a new coil in a customer’s basement (above and below).

SMALL SHOP TRADEOFFS

As with every size company, there are tradeoffs. Where the good outweighs the bad often depends on circumstances and personal preference. According to York Sr., some customers prefer to work with small one-man shops.

“Their clientele is often a special breed which cherishes their ability to develop and maintain a personal one-on-one relationship with the company owner,” he said. “They must be, and generally are, willing to wait until their man can get to them even if they suffer some inconvenience.”

Zalucha acknowledged that he cannot get to everybody right when they call.

“Sometimes my customers mind waiting, but on a whole, they don’t mind waiting as long as I get to them relatively quickly,” he explained. “I have lost business in the busy times because of this, but my commercial contract customers are a priority in my business. If I can’t get to a job, I am honest with the customer. It helps me retain them as a future customer, even when I am unable to fulfill their immediate need.”

One of the biggest issues between the one-man shop and larger contractors is pricing. With low overhead and no staff to pay, it is not uncommon for the smaller contractor to sell jobs at a lower price and yet still make a profit. These actions can create steep competition for the larger contractor whose large overhead and staff will not always allow them to compete at those price levels.

“We would be foolish to say they don’t affect our business today,” said Taylor. “They are setting a false expectation with consumers by working on price only in the commodities marketplace.”

According to Taylor, the fallout of this trend forces his company to spend more time and dollars educating customers on what truly is in their best interest.

US VERSUS THEM

The legitimacy of the one-man shop debate has been going on for years. At times battle lines have been drawn and what began as a friendly conversation ends in an Us versus Them grudge match that leaves the smaller companies looking like a bunch of misfit con artists and the larger companies looking like puppy-kicking aristocrats.

“There seems to be an impression that there is something wrong with us because we are large,” said George “Butch” Welsch, president of Welsch Heating & Cooling Co. in St. Louis. “I see the important thing for a larger company is to not act like a larger company. Even though we have 5,000 maintenance agreement customers, we still must treat each of them as we would if they were our only customer.”

David Mason, owner and operator of his one-man shop in Michigan’s thumb area, agrees. He acknowledged that there is a place in the industry for the larger contractors and that these companies house many talented people.

“However, I feel their roles must change to meet the evolving aspects of this industry,” he said. “By this, I mean they will have to go back to offering customers the feeling of being handled by the small shop that knows them personally and will handle them accordingly.”

At the end of the day, most of this debate comes down to two things, customer service and comfort. Those that supply both of these satisfactorily should probably be crowned successful despite their size; and those that don’t might need to take a step back and analyze their position in the market.

FEEDBACK REQUESTED: So, is there room in the HVACR industry for the one-man shop? Let us know. Post your opinion on our Facebook page at www.facebook.com/achrnews or send an e-mail to angelaharris@achrnews.com.

Publication date: 07/26/2010

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

Recent Articles by Angela Harris

You must login or register in order to post a comment.

Place for One Man Shops isnt the question to ask

Steven Lewis
July 26, 2010
The real question is how do you assure the quality of the installation, service and follow through of a shop of any size - I live and work in rural Kansas and compete with firms both large and one man. the ability to keep informed and trained boils down to a commitment (or lack of it), to the industry and the costumers as a whole. There is and always will be a place for companies of all sizes but there should never be an acceptance for poor service, training or outright fraud. We are either a professional in a business of any size or as you stated in your article a worker in a job without a boss. Like everything else in life it comes down to a personal choice based on your character

Precision Heating & Cooling

Lisa R
August 11, 2010
I have used Precison Heating & Cooling and have ALWAYS been pleased. Mr. Scott Zalucha has never let my family down. He is prompt, professional and above all HONEST. And his prices, I can say from having another company do the same job multipe times, are much lower but the quality much higher. I will never let the red truck back in my house again. I wouldn't ever hire another company. Thank You Scott!

One man shops

Jim Gau
September 26, 2010
What i don't understand is why Larger companies say they have to spend more time educating there customers about this issue. Is this where most of them started. Didn't they have a dream, a goal? Look where they are now. I've been in the trade for 14 years mostly working for larger companies that are great companies. Ive started my business in April 2010, and i love it. I provide service and Installs that are dependable and reliable and offer a 100% satisfaction guarantee. I don't give my jobs away at a low ball price, I believe in keeping some standard in pricing, Just because i'm a one man shop doesn't mean i have to settle for a lower price. IM NATE certified, EPA certified, and Licensed by the state of Ohio. My Installs are built from the ground up covering everything from subcooling to static pressure. This is a one man shop who is not afraid to go up against any larger firm. Maybe one day contractors will work together to help each other, until then i guess we will listen to them cry like kids.

Multimedia

Videos

Image Galleries

2014 MCAA Annual Convention

Scenes from the 2014 MCAA Annual Convention in Scottsdale, Ariz.

Podcasts

Kyle Gargaro, editor-in-chief of The NEWS, hosted the 2014 ACCA CEO Forum. At the event, six well-known, highly respected company executives, Gary Michel, Ingersoll Rand/Trane; Chris Nelson, Carrier Corp.; Chris Peel, Rheem Mfg. Co.; Rod Rushing, Johnson Controls; Brent Schroeder, Emerson Climate Technologies; and Doug Young, Lennox; provided individual industry outlooks and fielded questions directly from attending contractors. Listen to the entire event on the NEWSMakers podcast. Posted on April 14.

More Podcasts

THE MAGAZINE

ACHRNEWS

NEWS 04-14-14 cover

2014 April 14

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe

SERVICE CALLS POLL

Which statement on service calls best applies to your business?
View Results Poll Archive

HVACR INDUSTRY STORE

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

 

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

DON'T MISS A THING

Magazine image
 
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

STAY CONNECTED

facebook icontwitter iconyoutube iconLinkedIn i con