It is one thing to install efficiently running refrigeration equipment. But it also has to be energy efficient - according to a wide range of standards. That’s why Emerson recently issued a white paper called Status of Energy Regulations for Commercial Refrigeration Equipment.
Besides performing their duties capably, another way refrigeration and ice machines can show how good they are is to be easy to install and service. As winners of the 2011 Dealer Design Award in the Refrigeration and Ice Machines category, the products described here have all displayed this characteristic.
The pendulum in terms of ice machines has been swinging back and forth between complex to basic systems. Sometimes the trend was to the complex with detailed diagnostics. The swing to basic brought simple systems designed to run efficiently. But now there is a new level of up front high tech developments to make things simpler down the line.
When a refrigeration system fails, many times the cause can easily be diagnosed. However there are occasions when the cause cannot easily be determined - either the true cause is unclear or the technician is unsure of a problem. How do you work through these jobs? One method used by some techs is to “read and record.”
A sign at one of the booths at the National Restaurant Association Show stated: “Being on the Food Page is Good. Being on the Front Page is Bad.” That concern was certainly the focus of the refrigeration-related exhibitors where drink and food safety were reflected in the quality of ice and the effectiveness of freezers and coolers.
It is one thing to install efficiently running refrigeration equipment. But it also has to be energy efficient – according to a wide range of standards. That’s why Emerson recently issued a white paper called Status of Energy Regulations for Commercial Refrigeration Equipment.
The process of brazing ACR tubing is a common task for many refrigeration technicians. Although this is relatively simple, there are some system problems that can occur if some basic brazing procedures are not followed.
This article is part two of a two-part series on ice flake machine troubleshooting. The last article, which appeared in the Feb. 7 NEWS, examined troubleshooting low and high water levels. This article will examine water impurities and mechanical problems.
This article is part one of a two-part series on ice flake
machine troubleshooting. This article will examine troubleshooting low and high
water levels. Next month’s article will examine water impurities and mechanical
problems.
Refrigeration contractors and technicians who work in the domestic refrigeration sector should be aware of increased efficiency standards that are also affecting ice making equipment and room air conditioners. And all those in refrigeration should look at such efficiency upgrades as a growing trend across the board.