Maintenance Is The Key To Rooftop Longevity

June 19, 2002
/ Print / Reprints /
ShareMore
/ Text Size+
Look across the commercial landscape, and it’s almost guaranteed that you’ll see the familiar packaged rooftop “box” on countless rooftops — malls, retail spaces, schools, and office buildings.

Rooftop units have come a long way in recent years. They now contain more sophisticated controls, improved serviceability features, and unique ways to address indoor air quality (IAQ) issues. But even the best-made rooftop can’t keep soldiering on if routine maintenance is not performed regularly.

Some owners may look at preventive maintenance as being too expensive and unnecessary, so it’s up to the contractor to convince them otherwise. Pointing out the long-term benefits of a preventive maintenance program, such as lower energy costs and fewer breakdowns, may convince building owners to sign on.

Fortunately, manufacturers keep redesigning their rooftop units so that performing routine maintenance is much easier.

Many manufacturers now include controls on their rooftop units that state pressures, temperatures, and other important information. (Courtesy, Carrier Corp.)

CREATE A CHECKLIST

There is no set answer to the question of how often a rooftop unit should be maintained. Whether it’s monthly, quarterly, or twice a year depends on the application and location.

For instance, a rooftop unit located in an area with a lot of trees or pollution probably needs to be maintained more often than one located in a fairly barren, rural location. And a rooftop unit that runs almost continuously will probably need to be looked at more than one that runs a few hours a day.

That being said, there are general maintenance guidelines. David Boen, technical service engineer for American Standard, Clarksville, TN, notes that proper maintenance of a rooftop unit should include:

  • Replacing or cleaning air filters;

  • Inspecting the evaporator coil and cleaning if needed; “If the filters are kept clean and the maintenance is done regularly, often the evaporator coil doesn’t have to be cleaned on a regular basis, but you should inspect the coil to see if it’s dirty,” says Boen.

  • Inspecting the condensate drain and cleaning it if needed (if the drain pan is removable, take it out and clean it with soap and water);

  • Inspecting the belt and drive system and replacing the belt if it’s worn or cracked;

  • Inspecting the blower wheel for cleanliness and cleaning as needed;

  • Inspecting the economizer gaskets to make sure they’re properly sealed, so that the amount of air that was originally established during the air balance is still there;

  • Testing the economizer for proper operation;

  • Washing the condenser coil;

    Cleaning the condenser coil is one of the many steps involved when performing regular maintenance on a rooftop unit. (Courtesy, American Standard)
  • Inspecting the condenser fan blade for cracks;

  • Inspecting the cabinet for obvious deterioration;

  • Inspecting the unit mounting supports (which help keep the unit quiet);

  • Inspecting duct connections to ensure they are physically sound and not leaking;

  • Checking electrical components for signs of wear;

  • Inspecting safety components (e.g., high-limit switch) and testing them per manufacturer’s guidelines; and

  • Checking the refrigerant charge per the manufacturer’s guidelines.

    Ted Cherubin, senior product manager, Carrier Corp., Syracuse, NY, adds that particularly before summer, contractors should clean out all the fall and winter debris that may have collected in or around the unit(s).

    “Take a good visual look at the coils to see if anything is obstructing airflow on the condenser side,” he said. “We also like to have people check the P-trap, as it dries out over the wintertime, can crack,

    get plugged, or get completely knocked off. That could cause a problem when the cooling season starts, because it won’t allow it to drain properly.”

    Whether or not that maintenance actually occurs depends on a combination of factors. Many contractors see planned maintenance as a way to keep customers loyal and keep service technicians busy in the off-season, when there aren’t as many service calls.

    If contractors see the value of regular maintenance, they will educate their customers and employees about its benefits. However, if a contractor sees regular maintenance as a waste of time, then it probably isn’t going to occur.

    “Maintenance gives contractors the opportunity to encourage the technician to look closely for problems that can result in breakdowns in summer and winter. An excellent service technician uses routine maintenance as a way of finding problems before they occur — problems that result in breakdowns — providing more benefits for the customer,” says Boen.

    Replacing or cleaning the air filters should be part of regular rooftop maintenance. (Courtesy, Carrier Corp.)

    BETTER AND EASIER

    Many manufacturers have listened to service technicians over the years and, as a result, are designing rooftop units that are much easier to maintain than ever before.

    For example, Carrier has designed its new units so that it’s not necessary to remove the top of the unit to change the motors or clean the coils. Most manufacturers now have hinged doors, so technicians don’t have to remove 23 screws before accessing the interior. Larger panels and good compressor access also have been incorporated into many rooftop units.

    Controls are another area in which manufacturers have made tremendous leaps. “Carrier and other manufacturers are trying to make it much easier for contractors or in-house maintenance staff to know when it’s time to do the maintenance. There are devices now on rooftops that have lights or visual messages that indicate it’s time to change the filters, what the systems pressures are, and if the economizer is operating properly,” says Cherubin. “This aids in determining a pattern for maintenance programs up front or exploits an uncommon occurrence.”

    And if it ends up being a service call, manufacturers are ready for that as well. Shawn Wood, packaged product leader, American Standard, notes, “American Standard microcontrols have added better control algorithms and reliability to the process. With some of the added features on these microcontrols, such as built-in test mode and on-board diagnostics, I would have to say that our rooftops are pretty easy to service, especially with practice and proper training.”

    Cherubin adds that service technicians are particularly happy with the more advanced controls available on rooftop units — as long as it is not a black box. “Our controls log the alarm history on the unit, and it can be accessed on the unit, remotely, downstairs, or across the country,” he says. “It will basically say at this time, this happened. The technician can get a feel for what has happened in the past and the unit can spell out to him in plain English exactly what’s wrong.”

    Beyond troubleshooting, both Cherubin and Boen encourage contractors and service technicians to first listen to the customer. “There may be more than one problem and the customer might provide just the right clue to get to the underlying or secondary problem,” notes Boen.

    He adds that the goal of a service technician is to look for the root cause; for example, a burned-out contactor could be caused by not having the transformer on the correct voltage tap. Premature compressor failure could be caused by collapsed ductwork or a plugged evaporator coil. Or, a cracked condenser fan blade could indicate a plugged condenser coil.

    “You’re doing a better service for the customer, and also making more money for your own business, by finding the root cause,” stresses Boen. Fortunately, manufacturers are making it easier and easier to track down and fix any of the root causes.

    With maintenance programs on the rise, it’s becoming more important to have service technicians voice their opinions on equipment being installed now. Easy access to filters, coils, economizers, condensate pans, and all other airstream devices can help reduce maintenance time and improve unit operation for years to come.

    Publication date: 06/24/2002

  • Did you enjoy this article? Click here to subscribe to The NEWS Magazine

    Recent Articles by Joanna Turpin

    You must login or register in order to post a comment.

    Multimedia

    Videos

    Image Galleries

    2014 MCAA Annual Convention

    Scenes from the 2014 MCAA Annual Convention in Scottsdale, Ariz.

    Podcasts

    NEWSmakers: Julian Scadden

    Training is an ongoing process. Julian will discuss how you can generate maximum return on time and energy invested training by following a three part process. Listen to this podcast to get expert tips on training, tracking and follow up. 

    More Podcasts

    ACHRNEWS

    NEWS 04-21-14 cover

    2014 April 21

    Check out the weekly edition of The NEWS today!

    Table Of Contents Subscribe

    SERVICE CALLS POLL

    Which statement on service calls best applies to your business?
    View Results Poll Archive

    HVACR INDUSTRY STORE

    plumbing-hvac.gif
    2014 National Plumbing & HVAC Estimator

    Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

    More Products

    Clear Seas Research

     

    Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

    DON'T MISS A THING

    Magazine image
     
    Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

    STAY CONNECTED

    facebook icontwitter iconyoutube iconLinkedIn i con