Refrigeration / Freezers & Coolers / Display Cases

Ice Breaker: Generic Refrigeration Maintenance Tips

January 17, 2011
/ Print / Reprints /
ShareMore
/ Text Size+

Refrigeration systems operate 24 hours a day, 365 days a year, basically untended. They are expected to operate trouble-free for many years. However, just like any other mechanical system, they require regular maintenance in order to keep operating properly and at peak efficiency.

The actual frequency and tasks performed for each system will vary from system to system. Always refer to the manufacturers’ guidelines for their maintenance requirements. However, below are some generic maintenance tasks which can be applied to many refrigeration systems. These tasks can be divided into two groups: one for maintaining the cabinet and one for maintaining the refrigeration system.

MAINTAINING CABINETS

Maintaining the refrigerated cabinets is definitely an important part of the program. Their doors need to be inspected regularly. Rubber door gaskets tend to rot quicker when caked with food and grime. They can be safely cleaned with a solution of baking soda and warm water. Larger doors such as the ones used on walk-ins will normally have a sweep. Be sure to inspect the sweep for damages and replace as needed.

Be sure to also clean, inspect, and lube the door hinges. Apply a bit of petroleum jelly to keep them working well. Verify the door closes properly and does not “pop” open. When working on walk-ins, also check the door latch and verify the door can be opened from the inside. This is a major safety checklist item. If a door closure is used, check to make sure it is operational.

Also check for any water, ice, or frost which may have collected within the cabinet. Water, ice, or frost collecting under the evaporator or the base of the cabinet may be the result of a condensate drain issue or some type of defrosting problem. Ice or frost on a door jam is usually an indication of a defective door heater or door gasket.

MAINTAINING REFRIGERATION SYSTEMS

Maintaining the refrigeration system is the second part of the program. First, check the case temperature. Generally medium temperature coolers should maintain a case temperature between 35 to 40°F and low temperature cases below 0°. If temperatures above these values are noticed, the cause needs to be determined and resolved. On medium temperature coolers, temperatures below 35° also indicate an issue which needs to be corrected.

Inspect the refrigerant lines for any oily locations and any missing or damaged insulation. Any missing or damaged insulation should be replaced. An oily refrigerant line can be the result of a refrigerant leak. The oily location needs to be examined more closely to discover the reason.

All electrical wiring and connections needs to be examined. Look for signs of any loose or overheated conductors or connections and replace or tighten as needed.

Both the evaporator and condenser coils need to be inspected and cleaned, as required. Also make sure the airflow to and through these coils are unrestricted. Also inspect and clean, as needed, any fan blades and fan covers. If applicable, oil any motors as required. Look for any frost or ice on the evaporator coil. Heavy frosting is normally an indication of a defrosting issue.

On small refrigeration systems, checking the system’s pressure is not necessary; in fact, it may even cause an issue. Small systems have a small refrigerant charge. Any loss of refrigerant can cause the system to operate inefficiently and if enough refrigerant is lost, it might not operate at all.

There are two issues technicians must deal with when working on these small systems. First, they may not have any access ports to check the system’s pressure. If this is the case, a technician needs to add a port. If not installed properly, it can cause refrigerant to leak from its connection. Even a small leak is a problem.

The other issue is the amount of refrigerant lost each time a technician attaches the manifold hoses. A little refrigerant is lost each time a hose is attached and removed. The longer the hose, the more refrigerant is lost. The smaller the system, the more critical this loss of refrigerant becomes. So the best practice when dealing with small systems is not to attach your manifold gauges unless the system is not working properly and you need to diagnose a problem. If the system is working properly, leave it alone.

Some technicians may check the system’s suction or discharge temperature. If excessive, they will examine the system closer. When dealing with larger systems that have access ports, checking the system’s pressures, temperatures, superheat, and sub cooling values is a good practice and will not cause an issue with the small amount of refrigerant lost.

Regularly maintaining refrigeration systems is definitely a plus for technicians and their customers. It should be a regular part of any contracting business and its importance demonstrated to their customers.

Publication date: 01/17/2011

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

Recent Articles by Joe Marchese

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

2014 MCAA Annual Convention

Scenes from the 2014 MCAA Annual Convention in Scottsdale, Ariz.

Podcasts

NEWSmakers: Julian Scadden

Training is an ongoing process. Julian will discuss how you can generate maximum return on time and energy invested training by following a three part process. Listen to this podcast to get expert tips on training, tracking and follow up. 

More Podcasts

THE MAGAZINE

ACHRNEWS

NEWS 04-14-14 cover

2014 April 14

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe

SERVICE CALLS POLL

Which statement on service calls best applies to your business?
View Results Poll Archive

HVACR INDUSTRY STORE

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

 

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

DON'T MISS A THING

Magazine image
 
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

STAY CONNECTED

facebook icontwitter iconyoutube iconLinkedIn i con