In addition to the Cooling Showcase commercial product grid (see PDF link at the bottom of this article), The NEWS is featuring the industry’s latest commercial cooling products in the following photo feature. The manufacturers provided The NEWS with the brief descriptions of features included with each product. For more information, please contact the manufacturers or their distributors.

American Standard

Advertisement: For more info, click here

Model: T/YHC036E, 048E, 060E rooftop

Footprint (inches): Manufacturer did not specify.

Economizer availability: Drybulb, enthalpy control.

Serviceability features: ReliaTel microprocessor controls have colored wiring. Hinged access doors, easier-to-adjust ID fan idler mechanism offers quick belt tensioning. Factory-installed options include phase monitors, hail guards, disconnects, 115-vac outlets.

Technical support: Available through local distributor and factory support.

Technical materials: RT-SVD03*-EN (Micro guide), Y_C, T_CSVB002-EN wiring manuals.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Two-inch pleated filters, slide-out noncorrosive drain pan, CO2 sensing, low airflow.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts.

Additional features: Superior dehumidification capabilities with selections down to 200 cfm/nominal ton, ReliaTel controls, and enhanced lead times.

Warranty information: Five-year compressor, five-year standard gas heat exchanger, 10-year stainless steel heat exchanger.

Installation requirements: TXVs are standard for this product offering.

Contact: American Standard, Tyler, Texas; attn: Steve Spires, 903-266-3756; 903-509-7249 (fax); steven.spires@americanstandardair.com; www.americanstandardair.com.

eProduct 160

Arcoaire

Model: PAE090-150 package air conditioner

Footprint (inches): 87 (w) by 57 (l)

Economizer availability: Prewired for economizers; fully modulating and three-position economizers are available for downflow or horizontal applications.

Serviceability features: Removable panels provide ready access to unit components for removal or maintenance. Units feature through-the-base utility connections capability and noncorrosive condensate pan with self-draining sloping design.

Technical support: Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

Technical materials: Product information posted online at the dealer Website (www.goarcoaire.com) includes product specification sheets, installation and operation manuals, and technical support-parts manuals.

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans. Positioning the outdoor fan blade low in the rooftop cabinet provides best in class ARI-listed outdoor sound ratings.

IAQ equipment supported: Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.

Thermostat compatibility: Compatible with most commercial thermostats.

Replacement parts compatibility: Key components of this product are standardized throughout the line.

Additional features: ASHRAE 90.1-compliant unit features two independent cooling circuits to provide part-load cooling operation. High- and low-pressure controls provide system protection for extreme cooling operating conditions. Refrigerant filter-driers are standard to help ensure system cleanliness and meet commercial specifications. Freeze-protection thermostats on each refrigerant circuit protect against coil frosting at low load operations.

Warranty information: Five-year limited compressor, one-year limited parts. The HELP® extended service agreement program has several options on Arcoaire commercial products.

Installation requirements: Reliable fixed-orifice metering devices.

Contact: Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goarcoaire.com.

eProduct 161

Model: PHH090-120 package heat pump

Footprint (inches): 87 (w) by 58 (l)

Economizer availability: Prewired for economizers; fully modulating and three-position economizers are available for downflow or horizontal applications.

Serviceability features: Units feature through-the-base utility connections capability and noncorrosive condensate pan with self-draining sloping design. Removable panels provide access to unit components for removal or maintenance.

Technical support: Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

Technical materials: Product information posted online at the dealer Website (www.goarcoaire.com) includes product specification sheets, installation and operation manuals, and technical support-parts manuals.

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans. Positioning the outdoor fan blade low in the rooftop cabinet provides best-in-class ARI-listed outdoor sound ratings.

IAQ equipment supported: Two-inch return air filters. Optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.

Thermostat compatibility: Compatible with most commercial thermostats.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Energy Star efficiency; also meets ASHRAE 90.1 requirements. Unit features two independent cooling circuits to provide part-load cooling operation. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specifications. High- and low-pressure controls provide system protection for extreme cooling operating conditions. Freeze-protection thermostats on each refrigerant circuit protect against coil frosting at low-load operation.

Warranty information: Five-year limited compressor, one-year limited. The HELP® extended service agreement program has several options on Arcoaire commercial products.

Installation requirements: Highly reliable fixed-orifice metering devices.

Contact: Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.goarcoaire.com.

eProduct 162

Bard Manufacturing Co.

Model: Quiet Climate 2 wall-mounted package heat pump

Footprint (inches): 31 (d) by 84 to 94 (h) by 42 (w)

Economizer availability: Available.

Serviceability features: All service and maintenance performed outside the building, consuming no interior floor space. Additional service features include multistep capacity compressor, ventilation package options factory or field installed, multispeed blower motor, high- and low-pressure switches, compressor time delay.

Technical support: Available through local distribution network.

Technical materials: Service parts guides, wiring diagrams, installation manuals (printed and CDs), Website.

Noise-reduction features: Technology delivers operating sound levels 20-35 times quieter than a standard wall-mount heat pump. Patent-pending acoustical sound accessories can be added for lower operating sound levels as requirements and budgets dictate.

IAQ equipment supported: Ventilation options include energy recovery ventilator, economizer, commercial room ventilator.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares standard Bard replacement parts.

Additional features: Efficient wall-mounted heat pump, featuring a multistep capacity compressor with green refrigerant R-410A and special sound reduction technology. Ideal for new construction, modular applications, school modernization, telecommunication structures and more.

Warranty information: Five-year parts, five-year compressor, optional six- to 10-year compressor.

Installation requirements: None.

Contact: Bard Mfg. Co., Bryan, Ohio; attn: Bill Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct 163

Bryant Heating and Cooling

Model: Legacy™ Line rooftop (580J/558J)

Footprint (inches): 74 by 47 and 88 by 60

Economizer availability: Both dry bulb temperature- and enthalpy-controlled economizers are available.

Serviceability features: Comes standard with a roomy control box; centralized service interaction on one terminal board; handled service panels; new “no-strip” screw technology; permanently attached, robust wiring diagrams; standardized components; and a removable service plug that lets techs read pressures with the panel on.

Technical support: Contact local representative.

Technical materials: Parts lists, wiring diagrams, service and setup manual, installation instructions, product data.

Noise-reduction features: Fully insulated cabinet with belt-drive fan.

IAQ equipment supported: Economizer sensors and 2-inch filters.

Thermostat compatibility: Capable of supporting common commercial thermostats.

Replacement parts compatibility: Designed with common parts.

Additional features: Designed for use with Puron® refrigerant. Keeping the same cabinet design with only a few changes from its predecessors, this rooftop is ideal for replacement opportunities.

Warranty information: Standard commercial warranty, extended programs available.

Installation requirements: None.

Contact: Bryant Heating and Cooling, Indianapolis; attn: Jennifer Morani, 317-481-5768; jennifer.morani@bryant.utc.com; www.bryant.com.

eProduct 164

Carrier Corp.

Model: WeatherMaster® (48/50 TC) package rooftop

Footprint (inches): 74 by 47 and 88 by 60

Economizer availability: Available as a factory option, controlled by either enthalpy or dry bulb temperature. Also available with CO2 sensors for demand control ventilation, and as a field-installed accessory.

Serviceability features: Designed with the contractor in mind, it comes with a large, organized control box; standardized components; permanent troubleshooting drawings that won’t fade or smudge; a control center which centralizes service points into one location; handled, easier-access panels; “no-strip” screw technology; and a removable service plug that simplifies taking refrigerant pressures.

Technical support: Contact local expert or call 800-227-7437 (800-CARRIER).

Technical materials: Product data, wiring diagrams; service, controls, and commissioning manual; installation instructions, as well as critical parts lists. Constant-volume rooftop units’ technical development program.

Noise-reduction features: Fully insulated cabinet with belt-drive fan.

IAQ equipment supported: Economizer sensors, high-intensity UVC lights, 2-inch filters.

Thermostat compatibility: Capable of supporting common commercial thermostats; common space sensors; or building automation systems (CCN, BACnet, Modbus® , Johnson Controls N2, and LonWorks®).

Replacement parts compatibility: Designed with common parts.

Additional features: Designed with Puron® refrigerant and for Carrier’s installed base, with the same footprint and minimal changes to the size and weight. With many factory-installed options available, from air management to smoke detectors, installation is easier and relatively stress free.

Warranty information: Standard commercial warranty, extended programs available.

Installation requirements: None.

Contact: Carrier Corp., Indianapolis; attn: Jennifer Morani, 317-481-5768; 860-660-3779 (fax); jennifer.morani@carrier.utc.com; www.carrier.com.

eProduct 165

Century

Model: HLH Series water-source heat pump

Footprint (inches): 36 (w) by 72 (d)

Economizer availability: Manufacturer did not specify.

Serviceability features: Performance monitoring system checks operation and signals potential problems so maintenance can be scheduled. Panels are removable for multiple access points to simplify service.

Technical support: Available at 517-787-2100, 8 a.m.-5 p.m. Eastern weekdays.

Technical materials: Installation-operation-maintenance manual and parts list can be e-mailed as PDFs or sent as hard copies; also available on Website.

Noise-reduction features: Double-isolation compressor mounting and torsion-flex motor mounts reduce vibration and resultant sound; fully insulated heat exchanger.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Multistage thermostat required.

Replacement parts compatibility: Many parts across the series are shared.

Additional features: System transfers energy within the building envelope to ensure none is lost and to provide highly efficient cooling. State-of-the-art electronic controls monitor key system points to prevent damage from high-low pressure, etc. Extended operating range and multiple motor selections to meet every application.

Warranty information: Five-year compressors, one-year other parts; see printed warranty for details, limitations. AssurancePlus™ extended warranty coverage available.

Installation requirements: Follow installation manual, standard water-source installation practices and local-national codes.

Contact: Century, Jackson, Mich.; attn: Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.century-hvac.com.

eProduct 166

Model: SW Series package water-cooled air conditioner

Footprint (inches): 42 to 88 (w) by 26 to 34 (d)

Economizer availability: Manufacturer did not specify.

Serviceability features: Service panels are equipped with lifting handles for removal. Units are factory wired. Manual-reset protection is provided on evaporator blower motors and also for each compressor control circuit in case of high-low pressure cutout.

Technical support: Available at 517-787-2100, 8 a.m.-5 p.m. Eastern weekdays.

Technical materials: Installation-operation-maintenance manual and parts list can be e-mailed as PDFs or sent as hard copies; also available online to distributors.

Noise-reduction features: Forward-curved blower has large-diameter wheel for maximum airflow with minimal operation sound. Rubber isolator mountings on compressors reduce vibration transmission.

IAQ equipment supported: Disposable filters are 2 inches thick.

Thermostat compatibility: Multistage thermostat required.

Replacement parts compatibility: Many parts across the series are shared, others are unique.

Additional features: Water cooled for energy efficiency; package unit will withstand harsh environments. Copper tubing on refrigerant circuit is brazed with a special alloy to minimize leaks caused by harsh conditions. Epoxy-type coating on coils and extra spacing for easier cleaning and minimal dust buildup. Blower RPM can be adjusted in the field.

Warranty information: One year, see printed warranty for details, limitations. AssurancePlus™ extended warranty coverage available.

Installation requirements: Ready for free-standing floor installation or addition of optional discharge plenum. Follow instruction manual, standard industry practices and local-national codes.

Contact: Century, Jackson, Mich.; attn: Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.century-hvac.com.

eProduct 167

Coleman

Model: Apex™ Series package unit, DG-03, -04, and -05

Footprint (inches): 82 (l) by 45 (w) by 33 (h)

Economizer availability: The units include single-input electronic enthalpy economizers.

Serviceability features: Units feature a hinged filter door, toolless blower, and access panels for service and maintenance. In addition, a permanently lubricated condenser and evaporator fan motor bearings need no annual maintenance.

Technical support: First level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7 a.m.-5 p.m. Central.

Technical materials: A full technical guide for the Coleman® Apex™ Series packaged unit, including wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions, is available at www.upgnet.com or by request.

Noise-reduction features: None.

IAQ equipment supported: Standard units are shipped with one-inch, throw-away filters installed. Two-inch pleated filters are a factory-installed option.

Thermostat compatibility: Standard thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The convertible commercial rooftop line combines high efficiency and advanced economizer controls with unprecedented installation flexibility and low installed costs. A single footprint size serves units 3-5 tons. Offered with natural gas heat, the line features Coleman’s Simplicity control board on every unit.

Warranty information: All models include one-year limited parts on the complete unit. Five-year compressor and electric heater elements, 10-year gas heat exchangers.

Installation requirements: None.

Contact: Coleman, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.switchtocolemanac.com.

eProduct 168

Model: ZW, ZK, ZS Apex Series package rooftop units

Footprint (inches): 181 by 92 by 53 (ZW and ZK Series); 125 by 92 by 49 (15T ZS Series); 136 by 92 by 49 (17.5-25T ZS Series)

Economizer availability: Available.

Serviceability features: Gas and electric utility knockouts are supplied in the unit underside as well as the side of the unit. The unit is completely charged, wired, piped, and tested at the factory for easier installation. Optional hinged/tool-free blower, blower motor, filter and electric access panels allow easier access for service.

Technical support: First level of support is provided by the distributor. Factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV) 7 a.m.-5 p.m. Central.

Technical materials: A full technical guide for Coleman ZW/ZK/ZS Apex™ Series packaged units, including wiring diagrams, sizes, parts, accessories, part numbers and installation instructions, is available at www.upgnet.com or by request.

Noise-reduction features: The compressor’s internal spring isolation and sound muffling minimizes vibration and noise. Optional double wall construction provides additional acoustic insulation.

IAQ equipment supported: Standard units are shipped with 2-inch throwaway filters installed. Two- and 4-inch pleated filters are offered as a factory installed option.

Thermostat compatibility: Standard thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: All models have four independent refrigerant circuits for efficient part-load operation and maximum comfort control. Although designed for curb mounting on a roof, they can also be slab-mounted at ground level or set on steel beams above a finished roof. All models are convertible between bottom and horizontal duct connections.

Warranty information: Limited warranties, including five-year compressor, 10-year heat exchanger, five-year electric heat element and one-year other parts.

Installation requirements: None.

Contact: Coleman, Norman, Okla.; attn: Jeff Hurt, 405-419-6563; 405-419-6545 (fax); jeffrey.n.hurt@jci.com; www.switchtocolemanac.com.

eProduct 169

Comfort-Aire

Model: PC180 package rooftop air conditioner

Footprint (inches): 146 (w) by 59 (d)

Economizer availability: Available.

Serviceability features: Easily removed access panels for the filter, blower, electric heat and compressor-controls allow easier servicing. Wiring is coded by number and color to facilitate service and maintenance, and externally mounted refrigerant gauge ports simplify diagnostics.

Technical support: Available at 517-787-2100 from 8 a.m.-5 p.m. Eastern weekdays.

Technical materials: Installation-operation-maintenance manual with troubleshooting section and parts list can be e-mailed as PDFs or sent as hard copies; also available online to distributors.

Noise-reduction features: Copeland scroll compressors for efficiency and quiet operation.

IAQ equipment supported: Comes with 1-inch disposable filters but can accommodate 2-inch filters.

Thermostat compatibility: Multistage thermostat required.

Replacement parts compatibility: Many parts across the series are shared, others are unique.

Additional features: Units are designed for ease of installation with one-piece top over the indoor section and raised flanges for air connections for superior water management. Four scroll compressors provide reliable two-stage cooling. Convertible horizontal-vertical airflow design allows field flexibility. Side and base electric power entries minimize roof penetrations.

Warranty information: One year, see printed warranty for details-limitations. AssurancePlus™ extended warranty coverage available.

Installation requirements: Follow instruction manual, standard industry practices and local-national codes.

Contact: Comfort-Aire, Jackson, Mich.; attn: Bob Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.comfort-aire.com.

eProduct 170

Model: SW Series package water-cooled air conditioner

Footprint (inches): 42 to 88 (w) by 26 to 34 (d)

Economizer availability: Manufacturer did not specify.

Serviceability features: Service panels are equipped with lifting handles for easier removal. Units are completely factory-wired. Manual reset protection is provided on evaporator blower motors and also for each compressor control circuit in case of high-low pressure cutout.

Technical support: Available at 517-787-2100 from 8 a.m.-5 p.m. Eastern weekdays.

Technical materials: Installation-operation-maintenance manual with troubleshooting section and parts list can be e-mailed as PDFs or sent as hard copies; also available online to distributors.

Noise-reduction features: Forward curved blower has large-diameter wheel for maximum airflow with minimal operation sound. Rubber isolator mountings on compressors reduce vibration transmission.

IAQ equipment supported: Disposable filters are 2 inches thick.

Thermostat compatibility: Multistage thermostat required.

Replacement parts compatibility: Many parts are shared, others are unique.

Additional features: Water-cooled for energy efficiency, package unit will withstand harsh environments. Copper tubing on refrigerant circuit is brazed with a special alloy to minimize leaks caused by harsh conditions. Epoxy-type coating on coils and extra spacing for easier cleaning and minimal dust buildup. Blower rpm can be adjusted in the field.

Warranty information: One year, see printed warranty for details-limitations. AssurancePlus extended warranty coverage available.

Installation requirements: Ready for free-standing floor installation or for addition of optional discharge plenum. Follow instruction manual, standard industry practices and local-national codes.

Contact: Comfort-Aire, Jackson, Mich.; attn: Bob Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.comfort-aire.com.

eProduct 171

Comfortmaker

Model: PAE180-240 package rooftop air conditioner

Footprint (inches): 91 (w) by 86 (l)

Economizer availability: Prewired for economizers; fully modulating and three-position economizers are available for either downflow or horizontal applications.

Serviceability features: Units feature through-the-base utility connections capability and noncorrosive condensate pan with self-draining sloping design. Filter access door requires no tools. Easily removable panels provide ready access to unit components for rapid removal or maintenance.

Technical support: Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

Technical materials: Product information posted online at the Comfortmaker dealer Website www.gocomfortmaker.com includes product specification sheets, installation and operation manuals, and technical support-parts manuals.

Noise-reduction features: Belt-driven evaporator fans provide efficient and quiet operation.

IAQ equipment supported: Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.

Thermostat compatibility: Compatible with most commercial thermostats.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specifications. ASHRAE 90.1-rated unit features two independent cooling circuits to provide part-load cooling operation. High- and low-pressure controls provide system protection for extreme cooling operating conditions.

Warranty information: Five-year limited compressor; one-year limited parts. The HELP® extended service agreement program has several options on Comfortmaker commercial products.

Installation requirements: TXVs are used on each refrigerant circuit to provide optimum refrigerant part-load control.

Contact: Comfortmaker, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gocomfortmaker.com.

eProduct 172

Model: PHH180 package rooftop heat pump

Footprint (inches): 91 (w) by 86 (l)

Economizer availability: Prewired for economizers; fully modulating and three-position economizers are available for either downflow or horizontal applications.

Serviceability features: Units feature through-the-base utility connections capability and noncorrosive condensate pan with self-draining sloping design. Filter access door requires no tools. Easily removable panels provide ready access to unit components for rapid removal or maintenance.

Technical support: Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. ICP technical training is available at field schools held at participating distributor locations.

Technical materials: Product information posted online at the Comfortmaker dealer Website www.GoComfortmaker.com includes product specification sheets, installation and operation manuals, and technical support-parts manuals.

Noise-reduction features: Quiet and efficient operation is provided by belt-driven evaporator fans.

IAQ equipment supported: Two-inch return air filters; optional economizer control (Honeywell W7212) accepts CO2 sensor for IAQ capability.

Thermostat compatibility: Compatible with most commercial thermostats.

Replacement parts compatibility: Key components are standardized throughout the line.

Additional features: Energy Star efficiency; also meets ASHRAE 90.1 requirements. Unit features two independent cooling circuits to provide part-load cooling operation. Freeze-protection thermostats on each refrigerant circuit protects against coil frosting at low load operation. Refrigerant filter-driers are standard to help ensure system cleanliness and meet tough commercial specifications. High- and low-pressure controls provide system protection for extreme cooling operating conditions.

Warranty information: Five-year limited compressor, one-year limited parts. The HELP® extended service agreement program has several options on Comfortmaker commercial products.

Installation requirements: Highly reliable fixed orifice metering devices.

Contact: Comfortmaker, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.gocomfortmaker.com.

eProduct 173

Daikin AC (Americas) Inc.

Model: VRV-WII-RWEYQ water-cooled heat pump or heat recovery condensing unit

Footprint (inches): 40 by 31 by 22

Economizer availability: Manufacturer did not specify.

Serviceability features: Advanced, self-diagnostic auto-check function will detect a malfunction and immediately display the type and location so it can be resolved quickly and effectively.

Technical support: Available at 972-245-1510, Monday-Friday, 8:30 a.m.-5 p.m. For more information, visit www.daikinac.com or call 866-432-4546 (866-4DAIKIN).

Technical materials: Service manual, engineering data book, installation manual, submittal data sheets, parts lists, guide specifications.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Some indoor fan coil units feature an air purification filter with photocatalytic deodorizing function.

Thermostat compatibility: Zone LCD remote controller for up to 16 zones, which provides a host of operational functions, inducing seven-day programmability. Connects to