HVAC Breaking News

June 13, 2005: ASHRAE Guideline Addresses IAQ And Thermal Comfort

June 13, 2005
/ Print / Reprints /
/ Text Size+
ATLANTA - Interactions between various factors, such as indoor air quality and thermal comfort, can make an apparently acceptable building environment less acceptable to a substantial fraction of the occupants. A proposed guideline from the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) calls attention to many interactions that designers might not have previously recognized or understood. These interactions can strongly influence occupant reactions to and perceptions of the quality of the indoor environment, according to Hal Levin, chair of the committee writing the guideline.

Guideline 10P, "Criteria for Achieving Acceptable Indoor Environments," is open for public comment until June 20. It specifies indoor environmental criteria that are acceptable to human occupants and are intended to minimize the potential for adverse health effects.

"Guideline 10 will be most helpful to designers who want to understand the interactions between the thermal conditions and indoor air quality," Levin said. "While the two are addressed separately in ASHRAE Standards 55 and 62, their important interactions are not."

For example, the warmer the air, the poorer and stuffier the air quality is perceived by occupants. This suggests that while the thermal comfort range spans several degrees, the lower end of the range should be preferred when there are known to be sources of pollutants, according to Levin. At the same time, when the thermal conditions are expected to be at the higher end of the comfort range, extra care must be taken to reduce indoor air pollutant sources or increase dilution with outdoor air.

"By carefully selecting the materials that are used in construction and furnishings, designers will be able to reduce the likelihood that occupants will find the air quality unacceptable, even at the upper end of the thermal comfort range," he said.

When pollutant sources are known to be present or are unavoidable, designing buildings to maintain temperatures at the lower end of the thermal comfort range will decrease the likelihood of complaints and reports of sick building symptoms.

Drafts of ASHRAE's proposed standards and guidelines are available only during their public review periods. To obtain an electronic draft version of ASHRAE Guideline 10P during the comment period, visit the "Standards for Public Review" shortcut at www.ashrae.org.

Publication date: 06/13/2005

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

You must login or register in order to post a comment.



Image Galleries

2014 MCAA Annual Convention

Scenes from the 2014 MCAA Annual Convention in Scottsdale, Ariz.


NEWSmakers: Julian Scadden

Training is an ongoing process. Julian will discuss how you can generate maximum return on time and energy invested training by following a three part process. Listen to this podcast to get expert tips on training, tracking and follow up. 

More Podcasts



NEWS 04-14-14 cover

2014 April 14

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe


Which statement on service calls best applies to your business?
View Results Poll Archive


2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research


Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.


Magazine image
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.


facebook icontwitter iconyoutube iconLinkedIn i con