Service & Maintenance / Extra Edition

Troubleshooting Challenge: A Tavern Owner's Request for a Second Opinion

May 9, 2011
/ Print / Reprints /
ShareMore
/ Text Size+
Figure 1. (Click on the image for an enlarged view.)

This month’s troubleshooting situation involves an under-counter refrigeration unit in a commercial application - a small, two-door side-by-side unit that allows for beverage storage in the right side compartment, and a small quantity of frozen items in the left side compartment. The customer’s original request for service reported that both sections of the unit were warm.

This unit is compact, built-in under the counter, and difficult to access. The first technician to respond to this situation told the tavern owner that he was familiar with common failures of this unique equipment, and after a quick look and observation of the operation of the unit (no meter tests), he explained to the customer that the compressor needed to be replaced and that he would have to order the necessary parts.

After the technician left, the customer called the office to request a second opinion. When you arrive, you also determine that this unit employs a PSC-operated hermetic compressor, fan-cooled condenser, and an evaporator fan motor and defrost system to maintain temperature and airflow. And, like the first technician, you determine quickly that air is circulating both inside and under the cabinet, and that the compressor isn’t starting. Figure 1 shows you the basic compressor wiring configuration you see after making sure the power supply is off, removing the necessary access panels, setting up a work light, and removing the cover over the PTC (positive temperature coefficient) relay and overload assembly.

Figure 2. (Click on the image for an enlarged view.)

Since you find no visual evidence of wiring or component failure, you remove the start components and use an ohmmeter to test the compressor. A schematic of the motor and the terminal connections are shown in Figure 2.

Your results are:

1. From C to S, 6 ohms.

2. From S to R, infinity.

3. From C to R, infinity.

Your troubleshooting question: Have you confirmed the first technician’s diagnosis, or will you be advising the customer that the repair procedures will change?

Compare your answer with ours by clicking on the PDF link below.

For information on Jim Johnson’s HVACR technician training DVDs, go to www.technicaltrainingassoc.com/HVACRVideoStart.htm.

Publication date: 05/09/2011

Links

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

Recent Articles by Jim Johnson

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

2014 Energy Efficiency Forum

Highlights from the 25th annual Energy Efficiency Forum in Washington, D.C.

Podcasts

NEWSMakers: Jason Vogelbaugh

Jason Vogelbaugh of Alpha Controls drops in to the NEWSMakers podcast to discuss his role with the company, the InsideIQ Building Automation Alliance, and current energy-efficiency projects being worked on. Posted on Sept. 26.

More Podcasts

ACHRNEWS

NEWS 09-29-14 cover

2014 September 29

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe

EFFICIENCY STANDARDS

DOE has denied AHRI’s petition for reconsideration of walk-in standards. Is it getting harder to reach consensus on efficiency standards?
View Results Poll Archive

HVACR INDUSTRY STORE

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

 

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

DON'T MISS A THING

Magazine image
 
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

STAY CONNECTED

facebook icontwitter iconyoutube iconLinkedIn i con