Tech's Checklist Is A Lifesaver

December 9, 2004
/ Print / Reprints /
ShareMore
/ Text Size+
Sean Smith, a service technician with F.W. Behler Inc., analyzes the combustion gas from the chimney flue in the basement of a home in York, Pa.
YORK, Pa. - Sean Smith was just doing his job. He was wrapping up a no heat call in a rental unit, answering a call made during the middle of the night. The service tech for F.W. Behler Inc., York, Pa., had just replaced the thermocouple and decided to check for spillage from the draft diverter - a sure sign that the draft from combustion products was not going up the chimney, its intended path. It was a routine checklist item that had become second nature to him.

Smith determined that the chimney was completely blocked. All of the combustion products were emptying into the basement, where two of the five children in the home slept.

"There was spillage from the boiler and water heater - 100 percent into the basement," said Smith. "I think the kids' beds were about 15 feet from the boiler."

He said he learned about checking the draft diverter from his boss, Dave Yates, president of F.W. Behler. After identifying the chimney flue as the culprit, Smith proceeded to clean the debris from the bottom of the chimney, also a routine function of his job.

Sean Smith uses a Bacharach CO detector in the floor vent during a service call.

Checking For CO

Smith, who began working for Behler 10 years ago, said checking for combustion problems is second nature to him, as it is for most service techs.

Smith usually carries a Bacharach carbon monoxide (CO) tester and a UEI combustion analyzer with him on service calls. "Basically anyone can use test equipment and tell what CO levels are," he stated.

"I don't know why more techs don't use this equipment. I can only speak for myself - this is what I've been taught to do."

Although CO is an odorless and colorless byproduct of incomplete combustion, Smith said he can often tell there is a CO problem when he walks into a home before he breaks out his testing equipment.

"Some of the high levels of CO are pretty obvious," he said. "You are smelling other products of combustion, like a stenchy smell. It is hard to describe."

Smith said older homes with brick chimneys are especially susceptible to combustion-related problems.

"Condensation builds up in the chimneys, which eats at the brick and mortar, and the bricks start falling down," he said. "Birds also make a mess in the chimneys. It is not uncommon to go into a home and find a partially blocked chimney - you always want to check this.

Sean Smith checks the readings from his UEI combustion analyzer, attached to a probe inserted into the chimney flue exhaust pipe.
"There are a lot of landlord-owned homes in the city. Landlords sometimes wait until the last minute until something goes wrong before they take action."

Besides recommending homeowners or landlords have their chimneys checked every year, Smith recommends placing a CO detector in the hallway or near the steps leading to the basement.

"I also show people how to check the diverter, too," he said.

Yates said Smith's actions come as no surprise to him. "He's a real success story," said Yates. "He devours RSES journals like most people would devour candy. His diligence has advanced him to being one of our top techs."

Yates noted that the recent service call was nothing unusual for Smith. "This is just one of several fine CO catches Sean has had this year," he said.

In this case, the mother told Smith that her kids had been sick recently, and their pediatrician did not know why.

After the service call, Smith called back to follow up and see how the family was doing. "She said the kids had no other medical problems and were showing no symptoms," he said.

Checking for proper venting and combustion is part of an overall 33-point checklist for HVAC equipment installers. For a free copy, contact John R. Hall at johnhall@achrnews.com.

Publication date: 12/13/2004

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

Recent Articles by John Hall

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

2014 MCAA Annual Convention

Scenes from the 2014 MCAA Annual Convention in Scottsdale, Ariz.

Podcasts

NEWSmakers: Julian Scadden

Training is an ongoing process. Julian will discuss how you can generate maximum return on time and energy invested training by following a three part process. Listen to this podcast to get expert tips on training, tracking and follow up. 

More Podcasts

ACHRNEWS

NEWS 04-21-14 cover

2014 April 21

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe

SERVICE CALLS POLL

Which statement on service calls best applies to your business?
View Results Poll Archive

HVACR INDUSTRY STORE

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

 

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

DON'T MISS A THING

Magazine image
 
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

STAY CONNECTED

facebook icontwitter iconyoutube iconLinkedIn i con