ACHRNEWS

July 5, 2007: LEED Energy Performance Requirements to Increase

July 5, 2007

WASHINGTON - The U.S. Green Building Council’s (USGBC’s) membership has voted to require all LEED certified projects to achieve at least two “Optimize Energy Performance” points within LEED, which will improve the energy performance of all LEED certified green buildings by 14 percent for new construction and 7 percent for existing buildings.

According to the USGBC, buildings are an important and often overlooked solution to climate change: they are responsible for nearly 40 percent of CO2 emissions in the U.S., due to energy use, water consumption, and other operational issues. CO2, a greenhouse gas said to be a major contributor to climate change, has increased 18 percent since 1990 due to the rise in energy consumption.

“Improving energy performance will immediately increase the LEED Green Building Rating System's impact in reducing building energy related greenhouse gas emissions,” said Tom Hicks, vice president, LEED, U.S. Green Building Council.

All newly registered commercial LEED projects will now be required to achieve the two “Optimize Energy Performance” points within LEED. USGBC said the new requirement will reduce the environmental and economic impacts associated with excessive energy use and maximize energy performance of buildings through cost effective energy efficiency measures. To help projects achieve the new energy reduction requirements, a prescriptive compliance path is currently under development as an alternative to energy modeling. The two mandatory points will count towards a project's LEED certification.

Last November, USGBC’s board of directors passed an eight point agenda to address climate change and buildings.

“Each of the eight specific actions will have an immediate and measurable impact on CO2 reduction,” said Rick Fedrizzi, president, CEO, and founding chair. “When implemented in concert, they comprise a powerful leadership initiative that sets a high bar for the building industry.”

1. A 50 percent CO2 reduction goal - All new commercial LEED projects are required to reduce CO2 emissions by 50 percent when compared to current emission levels.

2. Increased energy reduction prerequisites in LEED - All LEED projects must achieve at least two energy and optimization credits.

3. Implementation of a carbon dioxide offset program.

4. Continuous process improvement incentives - All LEED for New Construction and Core and Shell buildings that reach certification will automatically (at no cost) be registered for LEED for Existing Buildings.

5. Pushing the envelope on performance - Certification fees rebates for Platinum buildings.

6. A carbon neutral USGBC - By the end of 2007, USGBC as an organization will be 100 percent carbon neutral.

7. Portfolio Performance Program - The long-term goal of this program is to recognize companies for high environmental performance across their portfolios.

8. Carbon reduction education, and a challenge to the industry - USGBC will be launching a new educational program designed specifically to help industry professionals gain the knowledge they need to apply design and construction practices that are energy efficient and have immediate and measurable impact on CO2 emissions. In addition, by 2010, there will be 100,000 LEED certified commercial buildings and 1 million certified homes. By 2020, there will be 1 million LEED certified commercial buildings and 10 million certified homes.

To view the energy optimization section of LEED, visit www.usgbc.org/ShowFile.aspx?DocumentID=2303. For more information on USGBC or LEED, visit www.usgbc.org.

Publication date: 07/02/2007