ACHRNEWS

E+E Elektronik GmbH: Condensation Monitor

April 19, 2010


The EE46 condensation monitor is specially designed for applications such as cooling ceilings that are operating close to the dew point temperature. Because of the potential danger of condensation, the monitor is an alarm system against the formation of moisture. It can be installed in a few seconds on pipelines, walls, and ceilings, says the company. A special coating protects the sensor and electronics against dirt and dust. The fast-response, highly accurate humidity sensor is exposed to the temperature of the surface of the object by means of a thermal conducting foil. Therefore, the humidity sensor measures the same rh as is present at the surface of the object to be monitored. If the preset set point of 90 percent rh is exceeded, the monitor switches a potential free contact and provides a signal, enabling early counter measures to be taken, e.g., to increase the temperature of the water in the pipe, to decrease the cooling power, or to turn on the heat. In addition, a LED on the enclosure indicates the actual status.

E+E Elektronik GmbH, Langwiesen 7, A-4209 Engerwitzdorf, Österreich, Austria; 43-7235-605-0; 43-7235-605-8 (fax); info@epluse.com; www.epluse.com

eProduct 184