ACHRNEWS

Do Notched V-Belts Wear Sheaves Faster Than Wrapped Belts?

October 18, 2010
Click on the image for an enlarged view.

People sometimes ask if there are wear differences due to the raw edge design of the notched V-belt vs. the fabric all over design of the classical wrapped V-belt. The fact is many factors can contribute to sheave wear. However, notched V-belts and wrapped V-belts have virtually identical sheave wear characteristics, typically every five to seven belt changes.

CAUSES OF SHEAVE WEAR

A simple acronym can help in remembering the key dynamics of sheave wear - TIME. It breaks down as follows:

• Tension

• Installation

• Maintenance

• Environment

Figure 1. Click on the image for an enlarged view.

EXPLANATION

Tension is often a leading cause of efficiency loss and leads to sheave wear. If belts are undertensioned, they slip in the groove of the sheave. As a drive starts and stops, the constant slipping decreases belt life and erodes sheave grooves. A tension checker is recommended for all installations and maintenance procedures to help ensure adequate tension.

Installation must be done correctly to avoid sheave wear. Technicians need to ensure that sheave alignment is achieved. Bushings must be properly installed so appropriate engagement with the sheave and shaft occurs. Failure to properly install a bushing can cause wobble and vibration. Even a slight wobble can cause premature sheave wear.

Maintenance is a critical element to minimizing sheave wear. Technicians need to ensure that preventive maintenance programs/schedules incorporate inspection of driver and driven sheaves. Technicians should check for proper alignment, installation, and tension. Note: Sheaves having greater than 1/32 inch wear need to be replaced. (See Figure 1.) A sheave gauge is an excellent tool for identifying sheave wear.

Environment is an often overlooked contributor to sheave wear. Technicians need to ensure that belt guards are properly installed and that debris is not falling into the drive path. Abrasive airborne contaminants such as sand and rock dust can destroy belts and quickly erode sheaves. If contaminants are ultimately unavoidable, a routine cleaning of sheaves should be performed to minimize wear.

VIDEO AND REFERENCE GUIDE

Browning has developed a 12-minute belt drive tensioning video that covers all aspects of sheave installation, maintenance, and proper belt tensioning. The video is viewable on the web at www.emerson-ept.com. In addition, a 120-page Belt Drive & Bearings Reference Guide (Form # 8932) covers proper maintenance procedures as well as troubleshooting information.

Reprinted with permission from the Browning Belt Drive Monthly published by Emerson Industrial Automation. For more information, visit www.emerson-ept.com.

Publication date: 10/18/2010