Wilkins further explained that "Standard 183P does not dictate a particular method or program but does establish a minimum level of care that would apply to any method. The standard draws information from the Society's handbook and publications, and assigned criteria is based on accepted practices for determining peak loads."

ASHRAE Standard 183P primarily addresses methods for determining the peak cooling load, both manual and otherwise. It requires that calculations for cooling load be performed for appropriate months and times of the day and sets criteria for the use of weather data, external heat gains from fenestration, opaque building envelope and infiltration, and internal heat gains.

"The ultimate goal of the standard is establish the criteria of an appropriate calculation process that will result in an accurate estimate of the air conditioning and heating load in a building," he said. "This load is ultimately the basis of the selection and sizing of the systems and equipment that are required to accomplish inherent psychrometric processes, such as conditioning for outside air, reheat, dehumidification, and humidification.

Wilkins said the standard will have a significant impact on ASHRAE members and the HVAC industry as a whole.

He noted that the membership on the committee includes design engineers, manufacturers, academia, energy efficiency experts, code enforcement engineers, and representatives from other societies.

"The balance on the committee allowed us to fulfill our responsibility to the industry and produce a balanced standard," he said.

Drafts of ASHRAE's proposed standards and guidelines are available only during their public review periods. To obtain an electronic draft version of ASHRAE Standard 183P during the comment period, visit the "Standards for Public Review" shortcut at www.ashrae.org.

Publication date: 05/16/2005