Choosing Alternatives

December 7, 2009
/ Print / Reprints /
ShareMore
/ Text Size+

What is the best retrofit blend for HCFC-22? Technicians and equipment owners are asking this question more often as we approach the next step down in the production of R-22. It sounds like a simple question, yet the answer will depend on several key factors.

There is a fundamental difference between air conditioning and refrigeration. That difference has to do with evaporator temperature. R-22 air conditioners, with evaporator temperatures between 35°F and 50°, will behave much differently than refrigeration systems running at 20° (medium temperature) or –20° (low temperature). Some blends will match R-22 properties in a/c and others will be better suited for lower temperature operations.

Another difference might be design capacity and run time for the intended application. Air conditioners are sized for the hottest few days of the year and will cycle considerably most of the time. A/C can tolerate lower capacity blends by simply running a little longer. Storage refrigeration applications are also sized for 18 to 20 hours run time during the day. Lower capacity blends can also be tolerated in these systems because there is allowance for longer run times. Where systems are sized to match the capacity of the load, or seem to be running all the time, blends with higher capacity will be needed to maintain equipment performance.

Smaller, self-contained refrigeration equipment or air conditioners will generally involve much less work to service or retrofit. If major components need replacement, it may often be easier to replace the entire unit, although replacement cost will also be a consideration. Blends that require component replacements or major oil changes may not be the best choice. Service of larger installations will more likely involve component replacement and planned retrofits can be more comprehensive in terms of leak repair, seal or gasket replacement, oil changes, or adjustments of controls, which opens up the choice of retrofit blend.

When doing your homework on R-22 alternative blends, don’t settle for a quick “one size fits all” solution. Depending on your application temperature, run time, and equipment size, you may find there are different answers to the question, “What should I use?”

[Editor’s note: The material was prepared by National Refrigerants, www.refrigerants.com.]

Publication date: 12/07/2009

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

2014 MCAA Annual Convention

Scenes from the 2014 MCAA Annual Convention in Scottsdale, Ariz.

Podcasts

NEWSmakers: Julian Scadden

Training is an ongoing process. Julian will discuss how you can generate maximum return on time and energy invested training by following a three part process. Listen to this podcast to get expert tips on training, tracking and follow up. 

More Podcasts

ACHRNEWS

NEWS 04-21-14 cover

2014 April 21

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe

SERVICE CALLS POLL

Which statement on service calls best applies to your business?
View Results Poll Archive

HVACR INDUSTRY STORE

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

 

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

DON'T MISS A THING

Magazine image
 
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

STAY CONNECTED

facebook icontwitter iconyoutube iconLinkedIn i con