Advanced Distributor Products
Model:F, P Series air handlerFootprint (inches): 36 (h) by 22 (d) by 15 (w) to 48 (h) by 26 (d) by 22 (w)
Serviceability features: Several time-saving, contractor-friendly serviceability features, including durable cabinet design and independent, easy-to-remove access panels. In addition, the multiposition unit is reinforced with coil-stabilizing brackets for horizontal applications. ETL-certified cabinet design reduces air leakage to 2 percent or less.
Technical support: Available at 866-303-8634, Monday through Friday from 8 a.m. to 4 p.m. Eastern time.
Technical support materials: Product brochure, engineering and spec guide, installation instructions, warranty, TXV installation instructions, and wiring diagrams.
Noise-reduction features: 5/8-inch foil-faced insulation and dynamically balanced blower wheels reduce noise in the unit.
IAQ equipment supported: UV lights; antimicrobial drain pans with Microban® protection help reduce mold and mildew growth.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares motors and coils with other lines.
Additional features: A compact, 13 SEER solution offers several time-saving, contractor-friendly features.
Warranty information: Five-year limited.
Special installation requirements: None.
Contact: Advanced Distributor Products, Stone Mountain, Ga.; attn: Christine Tucker, 770-465-5569; 770-465-5599 (fax); christine.tucker@adpnow.com; www.adpnow.com.
eProduct 151
Model: R Series air handler
Footprint (inches): 47 (h) by 22 (d) by 19 (w) to 60 (h) by 26 (d) by 21 (w)
Serviceability features: Designed to reduce service time and cost, the R Series features brackets that secure the coil assembly for horizontal installation. Three independent panels allow for easy access to the slide-out control board, blower and coil assemblies. A single-point connection kit means only one wire feeds into the unit, saving installation time.
Technical support: Available at 866-303-8634, Monday through Friday from 8 a.m. to 4 p.m. Eastern time.
Technical support materials: Product brochure, engineering and spec guide, installation instructions, warranty and TXV installation instructions, and wiring diagrams.
Noise-reduction features: 5/8-inch foil-faced insulation and dynamically balanced blower wheels reduce noise in the unit.
IAQ equipment supported: UV lights; antimicrobial drain pans with Microban protection, which reduces mold and mildew growth.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Heaters and coils.
Additional features: Designed for increased flexibility, this new air handler includes premium features that enhance efficiency, the company says. The unit meets and exceeds U.S. minimums for energy standards, and increases serviceability for contractors. The R Series air handler is rated at 13 SEER and above, depending on the condenser match.
Warranty information: Five-year limited.
Special installation requirements: None.
Contact: Advanced Distributor Products, Stone Mountain, Ga.; attn: Christine Tucker, 770-465-5569; 770-465-5599 (fax); christine.tucker@adpnow.com; www.adpnow.com.
eProduct 152
AirEase
Model:2SCU13LE split systemFootprint (inches): 25 by 26
Serviceability features: Four louvered panels are each removable with two screws. Control panel is removable by two screws; unit offers large control panel and service valve access, "U" channel routing for fan wiring. The suction line is mounted above liquid for brazing.
Technical support: Manufacturer did not specify.
Technical support materials: Wiring diagrams, service/troubleshooting information, installation data, parts, and part numbers.
Noise-reduction features: Sound blanket.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares parts with other models in the line.
Additional features: Appliance-like seams and contours with louvered panels. Wire fan guard, sound blanket to reduce noise. All Copeland scroll compressors. All units fixed orifice for most popular match.
Warranty information: 10-year compressor, five-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: AirEase, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.
eProduct 153
Model: 2SHP13LE heat pump
Footprint (inches): 25 by 26
Serviceability features: Four louvered panels are each removable with two screws. Control panel removable by two screws; unit offers large control panel and service valve access, "U" channel routing for fan wiring, suction line mounted above liquid for easier brazing, LED diagnostic board.
Technical support: Manufacturer did not specify.
Technical support materials: Wiring diagrams, service/troubleshooting info, installation data, parts and part numbers.
Noise-reduction features: Sound blanket
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares parts with other models in the line.
Additional features: Appliance-like seams and contours with louvered panels. Wire fan guard, sound blanket to reduce noise. All Copeland scroll compressors. All units fixed orifice for most popular match. LED diagnostic board.
Warranty information: 10-year compressor, five-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: AirEase, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.
eProduct 154
American Standard
Model:Allegiance 18 air conditioner/Heritage 18 heat pumpFootprint (inches): 41 (h) by 37 (w) by 34 (d)
Serviceability features: Easy-Sessâ„¢ service access panels for installation, service, and maintenance, including easy coil cleaning access.
Technical support: Contact local independent American Standard distributor.
Technical support materials: Supporting installation and service information, including part numbers, are available to independent American Standard distributors and their independent dealers.
Noise-reduction features: Compressor sound insulators available on certain models.
IAQ equipment supported: The proprietary AccuCleanâ„¢ removes up to 99.98 percent of airborne allergens. American Standard whole-house Perfect Fitâ„¢ air cleaners available in 1- or 5-inch media, or electronic. American Standard humidifiers.
Thermostat compatibility: Compatible with certain thermostats; American Standard markets its own branded thermostats.
Replacement parts compatibility: Shares parts with other models in the line.
Additional features: Two-row Spine Fin™ coil provides very low airflow resistance for more efficiency transfer capabilities; dual American Standard Duration™ compressors; corrosion-resistant finish with SermaGuard™ rust-resistant fasteners; Durabase™ basepan; Energy Star® qualified.
Warranty information: 10-year limited compressor, 10-year limited coil, five-year limited all other parts. Extended warranties optional for 10-year parts-and-labor coverage.
Special installation requirements: Manufacturer did not specify.
Contact: American Standard, Tyler, Texas; attn: Jamie Byrne, 903-581-3300; 903-581-9070 (fax); jamie.byrne@americanstandard.com; www.americanstandardair.com.
eProduct 155
Arcoaire
Model:DX 1300 split systemFootprint (inches): 31 to 35 (w) by 32 to 37 (d)
Serviceability features: Three-piece grille panels are easy to remove separately to view and clean. Easy-access panel to compressor, internal components. Comfort Alertâ„¢ troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for troubleshooting access to components (plug and play). Control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.
Technical support: A technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training available at ICP mobile training centers at locations nationwide and at field schools held at participating distributor locations.
Technical support materials: Product information posted at Arcoaire dealer Website (www.arcoairedlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors, two-speed fan motors, and compressor sound jackets to produce minimal sound at maximum performance.
IAQ equipment supported: A full line of IAQ products is available, including filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Standardized parts throughout the line.
Additional features: Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. New air management system improves performance without increasing sound. Corner posts with grille panels add strength to the unit and reduce noise and vibration. Tight wire coil guard with 3/ 8 -inch spacing provides protection with optimal airflow.
Warranty information: 10-year limited compressor and five-year limited parts. R-410A model qualifies for the five-year No-Hassle Replacement warranty. R-22 model qualifies for a one-year No-Hassle Replacement warranty. (If the compressor fails within the specified number of covered years from the installation date, ICP says it will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Arcoaire products; the optional Homeowner's Extended Labor Plan (HELP®) offers five- and 10-year plans.
Special installation requirements: TXV expansion devices recommended for maximum system reliability.
Contact: Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.arcoaire.com.
eProduct 156
Model: DX 1400 split system
Footprint (inches): 31 to 35 (w) by 32 to 37 (d)
Serviceability features: Easy-access panel to compressor, internal components. Three-piece grille panels are easy to remove separately to view and clean. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. Control box features easy-to-remove panel for troubleshooting access to components (plug and play); control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.
Technical support: A technical service advisor on staff at local distributors is available for technical assistance, troubleshooting. Technical training available at ICP mobile training centers at locations nationwide and at field schools held at participating distributor locations.
Technical support materials: Product information posted online at Arcoaire dealer Website (www.arcoairedlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors, two-speed fan motors, and compressor sound jackets to produce minimal sound at maximum performance.
IAQ equipment supported: A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Standardized parts throughout the line.
Additional features: Tight wire coil guard with 3/ 8 -inch spacing provides protection with optimal airflow. Corner posts with grille panels add strength to the unit and reduce noise and vibration. New air management system improves performance without increasing sound. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions.
Warranty information: 10-year limited compressor, seven-year limited outdoor coil, five-year limited parts. This product qualifies for the seven-year No-Hassle Replacement warranty. (If the compressor or covered coil fails within seven years from the installation date, ICP says it will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Arcoaire products; the optional Homeowner's Extended Labor Plan (HELP) offers five- and 10-year plans.
Special installation requirements: TXV expansion devices recommended for maximum system reliability.
Contact: Arcoaire, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.arcoaire.com.
eProduct 157
Armstrong Air
Model:2PHP13 rooftopFootprint (inches): 36 by 65
Serviceability features: Two-screw access to control panel, LED diagnostics on control board; service valves mounted high within the service panel; motor serviceable without removing the complete blower housing. All wires pulled to the far outside of unit and connection point.
Technical support: Manufacturer did not specify.
Technical support materials: Wiring diagrams, service/troubleshooting information, installation data, parts and part numbers.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Internal filter kit will hold a 1-, 2-, or 4-inch air filter.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares parts with other models in the line.
Additional features: All Copeland scroll compressors. LED diagnostic control board, 13 SEER efficiency, louvered panels, service valves mounted high inside the control panel.
Warranty information: 10-year compressor, five-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: Armstrong Air, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.
eProduct 158
Model: 4PGE15 rooftop
Footprint (inches): 36 by 65
Serviceability features: Two-screw access to control panel, LED diagnostics on control board, Comfort Alert diagnostics; service valves mounted high within the service panel. Motor serviceable without removing the complete blower housing. All wires pulled to the far outside of unit and connection point.
Technical support: Manufacturer did not specify.
Technical support materials: Wiring diagrams, service/troubleshooting info, installation data, parts and part numbers.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Internal filter kit will hold a 1-, 2-, or 4-inch air filter.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: All Copeland scroll compressors. LED diagnostic control board and Comfort Alert diagnostics, 15 SEER efficiency, louvered panels.
Warranty information: 10-year compressor, five-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: Armstrong Air, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.
eProduct 159
Bard Manufacturing Co.
Model:PA13 Series packaged air conditionerFootprint (inches): 53 to 55 (l) by 26 to 33 (h) by 38 to 42 (w)
Serviceability features: Unique over-and-under supply-and-return configuration eliminates the need for field modification. Service features include ECM indoor blower motor, high- and low-pressure switches, and top-discharge outdoor fan. Electrical components and controls accessible through side panel.
Technical support: Available through local Bard distribution network.
Technical support materials: Service parts guides, wiring diagrams, installation manuals (printed and CD formats), Website.
Noise-reduction features: ECM indoor blower motor provides low sound levels and soft-start capabilities.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares standard Bard replacement parts.
Additional features: Unique over-and-under supply-and-return air configuration. Ideal for retrofit market, as it eliminates need for costly field modification. Protected by built-in high-pressure switch, five-minute compressor time-delay relay, and baked-on enamel paint designed to withstand 1,000 hours of salt spray exposure.
Warranty information: Five-year parts, five-year compressor.
Special installation requirements: None.
Contact: Bard Manufacturing Co., Bryan, Ohio; attn: Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.
eProduct 160
Model: PH13 Series packaged heat pump
Footprint (inches): 53 to 55 (l) by 26 to 33 (h) by 38 to 42 (w)
Serviceability features: Unique over-and-under supply-and-return air configuration eliminates the need for field modification. Service features include ECM indoor blower motor, high- and low-pressure switches, and top-discharge outdoor fan. Electrical components and controls accessible through side panel.
Technical support: Available through local Bard distribution network.
Technical support materials: Service parts guides, wiring diagrams, installation manuals (printed and CD formats), Website.
Noise-reduction features: ECM indoor blower motor provides low sound levels and soft-start capabilities.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares standard Bard replacement parts.
Additional features: Unique over-and-under supply-and-return air configuration. Ideal for retrofit market, as it eliminates need for costly field modification. Protected by built-in high-pressure switch, five-minute compressor time-delay relay, and baked-on enamel paint designed to withstand 1,000 hours of salt spray exposure.
Warranty information: Five-year parts, five-year compressor.
Special installation requirements: None.
Contact: Bard Manufacturing Co., Bryan, Ohio; attn: Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.
eProduct 161
Bryant Heating and Cooling
Model:Evolution System 187ANA split systemFootprint (inches): 33 by 29 by 36 (2 ton) to 40 by 35 by 46 (5 ton)
Serviceability features: Provides exceptional efficiency and comfort while simplifying service, the company says. Back-seating service valves and plug-and-play factory wiring for the Evolutionâ„¢ control make for quick installation and easy maintenance. An on-board control allows communication with the Evolution control, providing up to 23 diagnostic checkpoints for servicers.
Technical support: Available at 800-428-4326 from 8 a.m. to 5 p.m. Eastern time, Monday through Friday.
Technical support materials: Wiring diagrams, installation and long-line application manuals, product data sheets, service manuals.
Noise-reduction features: AeroQuietâ„¢ System II includes two-stage compressor, compressor sound blanket, forward-swept fan blades, split post-compressor grommets.
IAQ equipment supported: Perfect Airâ„¢ purifier, electronic air cleaner, EZ Flex media filter, humidifier, UV lamp, ventilator.
Thermostat compatibility: Evolution user interface or Thermidistat required.
Replacement parts compatibility: Some shared, some unique.
Additional features: Designed to provide optimal durability and reliability. In addition to incorporating design features like baked-on powder post-paint and appliance-style fit and finish, these products undergo an assembly process that includes a five-step, 100 percent run test to ensure the highest standards in each unit, the company says.
Warranty information: Five-year parts, 10-year compressor. Optional extended warranties available.
Special installation requirements: TXV is required on indoor coil to achieve performance levels. Not compatible with capillary tube metering.
Contact: Bryant Heating and Cooling, Indianapolis; attn: Susan Fisher, 317-240-2911; 860-998-2430 (fax); susan.fisher@bryant.com; www.bryant.com.
eProduct 162
Model: Preferred Series 165ANA split system
Footprint (inches): 29 by 33 by 40 (1.5 ton) to 35 by 40 by 48 (5 ton)
Serviceability features: Delivers high efficiency and indoor comfort while easing service diagnosis. Back-seating service valves and Evolution control compatibility make for quick and simple installation and maintenance. An on-board control allows communication with the Evolution control, providing 14-point diagnostic checkpoint information to the servicer.
Technical support: Available at 800-428-4326 from 8 a.m. to 5 p.m. Eastern time, Monday through Friday.
Technical support materials: Wiring diagrams, installation and long-line application manuals, product data sheets, service manuals.
Noise-reduction features: AeroQuiet System II includes two-stage compressor, compressor sound blanket, forward-swept fan blades, split post-compressor grommets.
IAQ equipment supported: Perfect Airâ„¢ purifier, electronic air cleaner, EZ Flex media filter, humidifier, UV lamp, ventilator.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Some shared, some unique.
Additional features: Designed to provide efficiency, reliability, and comfort at extremely quiet sound levels - as low as 66 dBA, the company says. Baked-on powder paint, color-matched ceramic-coated cabinet screws, and appliance-style fit and finish contribute to the durable design of this product.
Warranty information: Five-year parts, 10-year compressor. Extended warranties optional.
Special installation requirements: TXV required on indoor coil to achieve performance levels. Not compatible with capillary tube metering.
Contact: Bryant Heating and Cooling, Indianapolis; attn: Susan Fisher, 317-240-2911; 860-998-2430 (fax); susan.fisher@bryant.com; www.bryant.com.
eProduct 163
Carrier Corp.
Model:Hybrid Heat System with Infinity 19 heat pump, Model 25HNA9Footprint (inches): 40 (h) by 36 (d) by 43 to 46 (w)
Serviceability features: All system status codes can be accessed from the Infinityâ„¢ control; with remote access, dealers and homeowners can be notified of crucial system faults via e-mail or phone.
Technical support: Carrier's 24-hour hotline is available at 800-586-8336.
Technical support materials: Wiring diagrams, troubleshooting information, installation data, parts and part numbers, product information. All technical support materials are immediately available to contractors via www.HVACPartners.com.
Noise-reduction features: The outdoor unit features SilencerSystem IIâ„¢ sound-reduction components, which include split-post compressor grommets, external silencer muffler, SilencerSystem II design, ECM OD condenser fan motor, forward-swept condenser fan blade, compressor sound blanket, and laminated compressor plate. On the indoor section, the newly upgraded furnaces are up to 50 percent quieter than previous models.
IAQ equipment supported: Ideal Humidityâ„¢ system with SmartEvapâ„¢ and Superdehumidifierâ„¢ for improved air quality and economical Comfortfanâ„¢ for comfort. Infinity control serves as the information center with IAQ maintenance reminders; Infinity air purifier; humidifier products; UV germicidal light; Carrier energy recovery ventilator (ERV); and Carrier heat recovery ventilator (HRV).
Thermostat compatibility: Uses Infinity control.
Replacement parts compatibility: Shares many components except for some unique two-stage parts.
Additional features: Features the intelligence of the Infinity system. Unlike other dual-fuel systems, it will automatically switch from one fuel source to another when the temperature outside reaches a certain level. It offers homeowners control over their indoor comfort at the lowest operating cost during both the heating and cooling seasons.
Warranty information: Standard five-year limited all parts; 10-year limited compressor; limited lifetime furnace heat exchanger.
Special installation requirements: None. The heat pump has easy four-wire installation and factory-installed TXV.
Contact: Carrier Corp., New York; attn: Amanda Heng, 212-697-2600, ext. 297; 212-697-2646 (fax); aheng@gibbs-soell.com; www.carrier.com.
eProduct 164
Model: Infinity 21 Series split system, Model 24ANA1
Footprint (inches): 30 to 40 (h) by 29 to 35 (d) by 36 to 46 (w)
Serviceability features: Uses Carrier's Microtube Technologyâ„¢ and has up to an 18-point diagnostics system, back-seating service valves, high- and low-pressure switches, and plug-and-play factory wiring with the Infinity system. With Infinity remote access, homeowners and dealers can customize temperature and humidity levels, access and change vacation schedules, system status and more, via the telephone or the Internet.
Technical support: Carrier's 24-hour hotline is available at 800-586-8336.
Technical support materials: Wiring diagrams, troubleshooting information, installation data, parts and part numbers, product information. All technical support materials are available to contractors via www.HVACPartners.com.
Noise-reduction features: The SilencerSystem II offers sound levels as low as 70 dBA. Quiet-mount split-post compressor grommets. Exclusive silencer top design. Variable-speed outdoor condenser fan motor. Forward-swept condenser fan blade. Compressor blanket.
IAQ equipment supported: Infinity air purifier; humidifier products; UV germicidal light; Carrier energy recovery ventilator (ERV); Carrier heat recovery ventilator (HRV), and remote access.
Thermostat compatibility: Uses Infinity user interface.
Replacement parts compatibility: Shares parts.
Additional features: Provides energy efficiency and savings to homeowners. When used with the complete Infinity system, owners can integrate and manage temperature, humidity, airflow, ventilation, IAQ, and zoning with a single, intelligent control. In addition, they are alerted when it's time for regular maintenance and filter changes, and they can access their system status, settings, and schedules via phone or the Internet.
Warranty information: Standard five-year limited on all parts, 10-year limited compressor.
Special installation requirements: Microtube Technology refrigeration system is a 7-mm microtube heat transfer technology which has significantly reduced the size of each unit, enabling outdoor installation while being 13 SEER compliant. Plug-and-play factory wiring allows easier installation.
Contact: Carrier Corp., New York; attn: Amanda Heng, 212-697-2600, ext. 297; 212-697-2646 (fax); aheng@gibbs-soell.com; www.carrier.com.
eProduct 165
Century
Model:DMC18AS ductless mini-split air conditionerFootprint (inches): Outdoor: 34 (w) by 13 (d) by 26 (h); indoor: 43 (w) by 12 (h) by 7 (d)
Serviceability features: Self-diagnostics simplify troubleshooting and a test key allows quick identification of any operating problems. Service ports/connections are conveniently located on the side of the condenser; indoor unit easily lifts off hanging bracket and cover can be removed for service.
Technical support: Technical support available at 517-787-2100 from 8 a.m. to 5 p.m. Eastern time, weekdays.
Technical support materials: installation-operation manual and complete service manual including parts lists can be mailed as PDFs or sent as hard copies.
Noise-reduction features: Indoor unit is designed for ultra-quiet operation with high-tech tangential fan for balanced air flow and to move large quantities of air at low fan speed. Condensing unit keeps loudest operating noises outside.
IAQ equipment supported: Washable antibacterial filters. Dehumidification mode can be used alone.
Thermostat compatibility: Built-in thermostat.
Replacement parts compatibility: Some parts are shared across the line, while some are unique.
Additional features: Low-voltage wiring for inside unit eliminates cost of adding special electrical service. Dual compressors are staged to enhance comfort and energy savings by reducing temperature variances. High-tech tangential fan moves high volumes of air at low fan speeds for ultra-quiet operation.
Warranty information: Five-year compressor, one-year other parts (see written warranty for limitations).
Special installation requirements: Requires a hole 3 inches in diameter to run refrigerant lines and wires between the indoor and outdoor units. Outdoor condenser can be located close to the home. A simple bracket is used to hang the indoor unit.
Contact: Century, Jackson, Mich.; attn: Mark Lupton, 517-787-1200; 517-787-9341 (fax); info@heatcontroller.com; www.heatcontroller.com.
eProduct 166
Model: HRH060 geothermal heat pump
Footprint (inches): 25 (w) by 71 (d) by 21 (h)
Serviceability features: Removable panels on three sides allow unit to be accessed from multiple sides. Removable blower inlet ring allows access to the fan and motor.
Technical support: Technical support available at 517-787-2100 from 8 a.m. to 5 p.m. Eastern time, weekdays.
Technical support materials: Manuals and parts list can be mailed as PDFs or sent as hard copies.
Noise-reduction features: Double-spring and grommet-isolation mounting system for the compressor. Flexible-torsion motor mount. Compressor and air handler compartments are separated by an insulated divider. Discharge muffler reduces inherent compressor pulse noise.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares many parts across the line.
Additional features: Extended operating range makes unit suitable for nearly all climates. Compact size makes units ideal for tight spaces or retrofit applications. Performance monitoring system signals a problem before lockout occurs. Also available in desuperheater models with circulating pump to generate domestic hot water.
Warranty information: Five-year parts, seven-year compressor (see written warranty for limitations).
Special installation requirements: Comes with TXV metering device. Hanger brackets are included. Discharge air arrangement can be converted in the field.
Contact: Century, Jackson, Mich.; attn: Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.heatcontroller.com.
eProduct 167
Chigo USA
Model:QCIC-12A cooling-only ductless mini-splitFootprint (inches): 35 by 7 by 11
Serviceability features: Fault codes are displayed on indoor unit. Easy access for all components and filter.
Technical support: Available at 800-244-4662 (800-CHIGONA) 8 a.m. to 5 p.m. Eastern time or 8 a.m. to 5:30 p.m. Pacific.
Technical support materials: Installation manuals, Chigo basic application guide.
Noise-reduction features: Low-speed fan motors.
IAQ equipment supported: Upgraded filters.
Thermostat compatibility: Wireless remote control provided.
Replacement parts compatibility: Shares parts.
Additional features: Chigo units provide quiet comfort and dehumidification for offices, bedrooms, and other areas requiring separate comfort from a central system.
Warranty information: One-year parts, five-year compressor.
Special installation requirements: Both refrigerant lines require insulating because capillary tube expansion device is located in the outdoor unit. Control voltage is line voltage, so 14-AWG wire must be used for control wiring.
Contact: Chigo USA, Los Angeles; attn: Kenneth Sanchez, 800-244-4662 (800-CHIGONA); 562-699-4351 (fax); ken@chigousa.com; www.chigousa.com.
eProduct 168
ClimateMaster
Model:ClimaDry whole-house dehumidification option for Tranquility 27 and Tranquility 20 geothermal heat pumpsFootprint (inches): 31 by 25 (3-ton model)
Serviceability features: Installed at factory, internal to the unit. A separate compressor and controls are not necessary, simplifying service. No refrigerant circuit modifications are necessary. The all-water system makes troubleshooting and service like any other ClimateMaster heat pump, the company says.
Technical support: Distributor technical support is available throughout the U.S. and Canada. Factory technical support for distributors is available Monday through Friday from 8 a.m. to 5 p.m. Central time at 405-745-6000.
Technical support materials: ClimaDry application manual.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Whole-house dehumidification option allows unit to operate as a dehumidifier in cooling or in heating. Standard 2-inch, MERV-11 pleated filters and foil-backed air handler insulation (Tranquility 27 and Tranquility 20 units) enhance IAQ.
Thermostat compatibility: Requires a separate humidistat/dehumidistat or ClimateMaster Model ATP32U02 integrated thermostat (temperature and humidity control).
Replacement parts compatibility: Shares common components.
Additional features: A patent-pending approach to providing dehumidification with modulating reheat using an all-water system. Refrigerant circuit is not modified, making the option easier to install and service.
Warranty information: Residential units include 10-year limited on all refrigeration components. Extended warranties are optional.
Special installation requirements: Manufacturer did not specify.
Contact: ClimateMaster, Oklahoma City; attn: Jeff Hammond, 405-745-6000; 405-745-4102 (fax); jhammond@climatemaster.com; www.climatemaster.com.
eProduct 169
Model: Tranquility 27 geothermal heat pump
Footprint (inches): 31 by 25 (3-ton model)
Serviceability features: Multiple service access panels with liftout handles, low-profile control box, brass service valves, diagnostic lights, filter-drier, high- and low-pressure service ports, swivel-type water connections, 75-VA transformer with circuit breaker, quick-attach wiring harnesses, eight standard safeties including water coil low-temperature sensing, and Unit Performance Sentinnelâ„¢.
Technical support: Distributor technical support available throughout the U.S. and Canada. Factory technical support for distributors available Monday through Friday from 8 a.m. to 5 p.m. Central time at 405-745-6000.
Technical support materials: Installation, operation, and maintenance manual; specs catalog; CXM/DXM microprocessor controls application manual; GeoDesignerâ„¢ loop-sizing software.
Noise-reduction features: Unique compressor double isolation system with computer-selected springs; fully insulated cabinet.
IAQ equipment supported: Compatible with most IAQ accessories.
Thermostat compatibility: Compatible with most heat pump thermostats.
Replacement parts compatibility: Shares replacement parts with packaged units: TT Series, and TS Series.
Additional features: The highest-efficiency split system geothermal heat pump available today, the company says. Features such as double-isolated compressor mounting and the absence of a condenser fan make it one of the quietest heat pump units available. Two-stage compressor operation provides superior comfort control.
Warranty information: Residential units include a 10-year limited on all refrigeration components. Extended warranties are optional.
Special installation requirements: TXV required for air handler.
Contact: ClimateMaster, Oklahoma City; attn: Jeff Hammond, 405-745-6000; 405-745-4102 (fax); jhammond@climatemaster.com; www.climatemaster.com.
eProduct 170
Coleman - UPG York
Model:Echelon Series packaged unitFootprint (inches): 49 (d) by 47 (w) by 33 (h)
Serviceability features: A single panel covers the electrical and gas controls, making servicing easier. The blower compartment has an additional large panel with a built-in handle tab. Removing this panel will allow the blower assembly to slide out for removal during maintenance and troubleshooting.
Technical support: First level of support provided by distributor; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern time.
Technical support materials: A technical guide, installation manual, submittal data sheet, and user manual are available on Coleman's Website (www.colemanac.com).
Noise-reduction features: The compressor has internal isolation and sound muffling to minimize vibration and noise. The compressor is isolated on a dedicated, independent mount. This unit also features a swept-wing fan design and high-efficiency scroll compressor technology, providing quiet, energy-efficient operation that delivers precise temperature and humidity control, the company says.
IAQ equipment supported: Compatible with a complete line of Coleman IAQ products, including ventilation systems, UV air treatment systems, electronic and media air cleaners, and whole-house humidifiers.
Thermostat compatibility: Designed to operate with 24-V electronic and electromechanical thermostats. All units can operate with single-stage heat/single-stage cool thermostats, with or without the economizer.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The unit uses R-410A, making it energy efficient and environmentally friendly. It's also Energy Star® qualified. An innovative fan design and composite material make the Echelon among the quietest in the industry, the company says.
Warranty information: Five-year parts, 10-year compressor.
Special installation requirements: None.
Contact: Coleman - UPG York, Norman, Okla.; attn: Andy Fracica, 405-419-6563; 405-419-6545 (fax); andy.fracica@york.com; www.colemanac.com.
eProduct 171
Model: [mc]2 MicroChannel MiniCube split system
Footprint (inches): 22 (w) by 22 (d)
Serviceability features: Features fully ex-posed refrigerant connections and a single panel covering the electrical controls for easier servicing. Secured, reusable service valves on both the liquid and vapor sweat connections make evacuating and charging easier.
Technical support: First level of support provided by distributor; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern time.
Technical support materials: A full technical guide with wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions is available upon request.
Noise-reduction features: Top discharge blows warm air up and away from the structure and surrounding landscape and minimizes operating noise. A rigid top panel, cushioned compressor mounts, and rippled condenser coil fins further reduce the unit's operating sound level.
IAQ equipment supported: Compatible with a complete line of Coleman residential IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The smallest 13 SEER product in the industry, the company says. The product uses aluminum microchannel coil technology to provide higher efficiency and greater capacity, without a corresponding increase in coil surface area. This technology reduces the size of the unit compared to traditional 13 SEER products, and uses less refrigerant.
Warranty information: Five-year limited parts, five-year compressor.
Special installation requirements: So small and lightweight that it can be installed by one service technician, the company says. The indoor coil requires a thermostatic expansion valve to ensure proper refrigerant flow.
Contact: Coleman - UPG York, Norman, Okla.; attn: Andy Fracica, 405-419-6563; 405-419-6545 (fax); andy.fracica@york.com; www.colemanac.com.
eProduct 172
Comfort-Aire
Model:HRV036 geothermal heat pump, verticalFootprint (inches): 22 (w) by 53 (d)
Serviceability features: Re-movable panels on three sides allow the unit to be accessed from multiple sides. Removable blower inlet ring allows easier access to the fan and motor.
Technical support: Available weekdays from 8 a.m. to 5 p.m. Eastern time at 517-787-2100.
Technical support materials: Manuals and parts lists can be e-mailed as PDFs or sent as hard copies.
Noise-reduction features: Double spring and grommet isolation mounting system for the compressor. Flexible torsion motor mount. Compressor and air-handler compartments are separated by an insulated divider. Discharge muffler reduces inherent compressor pulse noise.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares many parts across the line.
Additional features: Extended operating range makes unit suitable for nearly all climates, the company says. Compact size makes the unit ideal for tight spaces or retrofit applications. Performance monitoring system signals a problem before lockout occurs. A desuperheater model features a circulating pump to generate domestic hot water.
Warranty information: Five-year parts, seven-year compressor (see written warranty for limitations).
Special installation requirements: Can be ordered with left or right return.
Contact: Comfort-Aire, Jackson, Mich.; attn: Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.heatcontroller.com.
eProduct 173
Model: RSD1336 split system condenser
Footprint (inches): 30 by 30 by 33 (h)
Serviceability features: All controls and service ports are conveniently located on the back of the unit for easy access. The entire fan assembly lifts out for access to components. Controls and service ports are readily accessed.
Technical support: Technical support available weekdays from 8 a.m. to 5 p.m. Eastern time at 517-787-2100.
Technical support materials: Installation-operation manual and service manuals, including parts lists, can be e-mailed as PDFs or sent as hard copies.
Noise-reduction features: Top discharge minimizes operating noise.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares many parts across the RSD line.
Additional features: Small footprint for 13 SEER equipment. Full metal jacket protects the wraparound coil.
Warranty information: Six-year parts, 12-year compressor (when installed as part of matched system). See printed warranty for limitations.
Special installation requirements: Requires indoor coil with TXV.
Contact: Comfort-Aire, Jackson, Mich.; attn: Robert Sycks, 517-787-2100; 517-787-9341 (fax); info@heatcontroller.com; www.heatcontroller.com.
eProduct 174
Comfortmaker
Model:SoftSound SX 2300 split systemFootprint (inches): 31 to 35 (w) by 32 to 37 (d)
Serviceability features: Easy-access panel to compressor, internal components. Three-piece grille panels are easy to remove separately to view and clean. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for troubleshooting offers access to components (plug and play); control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.
Technical support: A technical service advisor is on staff at local distributors for technical assistance, troubleshooting. Technical training available at ICP mobile training centers nationwide and at field schools at participating distributor locations.
Technical support materials: Product information posted online at Comfortmaker dealer Website (www.comfortmakerdlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors, two-speed fan motors, and compressor sound jackets to produce minimal sound at maximum performance.
IAQ equipment supported: A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Standardized parts throughout the line.
Additional features: Corner posts with grille panels add strength to the unit and reduce noise and vibration. Tight wire coil guard with 3/ 8 -inch spacing provides protection with optimal airflow. A new air management system (AMS) improves performance without increasing sound. Comfort Alert troubleshooting LED fault indicators diagnoses system-related malfunctions.
Warranty information: 10-year limited compressor, five-year limited parts. R-410A model qualifies for the Comfortmaker five-year No-Hassle Replacement warranty. R-22 model qualifies for a one-year No-Hassle Replacement warranty. (If the compressor fails within the specified number of covered years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Comfortmaker products; the optional Homeowner's Extended Labor Plan (HELP) offers five- and 10-year plans.
Special installation requirements: TXV devices recommended for maximum system reliability.
Contact: Comfortmaker, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.comfortmaker.com.
eProduct 175
Model: SoftSound SX 2400 split system
Footprint (inches): 31 to 35 (w) by 32 to 37 (d)
Serviceability features: Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for troubleshooting, access to components (plug and play); control accessories prepunched for attachment. Easy-access panel to compressor, internal components. Three-piece grille panels are easy to remove separately to view and clean. Free-and-clear refrigerant tube stubs.
Technical support: A technical service advisor is on staff at local distributors. Technical training available at ICP mobile training centers nationwide and at field schools held at participating distributors.
Technical support materials: Product information posted online at Comfortmaker dealer Website (www.comfortmakerdlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors, compressor sound jackets, and two-speed fan motors to produce minimal sound at maximum performance.
IAQ equipment supported: A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Standardized parts throughout the line.
Additional features: Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. New air management system (AMS) improves performance without increasing sound, the company says. Corner posts with grille panels add strength to the unit and reduce noise and vibration. Tight wire coil guard with 3/ 8 -inch spacing provides protection with optimal airflow and ease of service.
Warranty information: 10-year limited compressor, seven-year limited outdoor coil, five-year limited parts. This product qualifies for the Comfortmaker seven-year No-Hassle Replacement warranty. (If the compressor or covered coil fails within seven years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Comfortmaker products; the optional Homeowner's Extended Labor Plan (HELP) offers five- and 10-year plans.
Special installation requirements: TXV devices recommended for maximum system reliability.
Contact: Comfortmaker, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.comfortmaker.com.
eProduct 176
Concord
Model:2HP13 heat pumpFootprint (inches): 30 by 30
Serviceability features: Louvered and nonlouvered coil protection options, hinged access panel, direct straight line sets, service valves mounted at 45-degree angles, molded compressor plugs, LED diagnostic control board, low-pressure switch, and accumulator are standard.
Technical support: Manufacturer did not specify.
Technical support materials: Wiring diagrams, service/troubleshooting information, installation data, parts, and part numbers.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: Hinged access panel swings out of the way for access to controls and internal unit. Basket-style fan guard for quiet operation, louvered and nonlouvered coil protection options, LED diagnostic control board.
Warranty information: Five-year compressor, five-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: Concord, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.
eProduct 177
Model: 2SA13 rooftop, straight cooling
Footprint (inches): 36 by 65
Serviceability features: Two-screw access to control panel, service valves mounted high within the service panel, motor serviceable without removing the complete blower housing, all wires pulled to the far outside of unit and connection point.
Technical support: Manufacturer did not specify.
Technical support materials: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Internal filter kit available that will hold a 1-, 2-, or 4-inch air filter.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: All Copeland scroll compressors, 13 SEER efficiency, service valves mounted high inside the control panel.
Warranty information: Five-year compressor, five-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: Concord, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.
eProduct 178
Dectron
Model:Dry-O-Tron dehumidifierFootprint (inches): Varies.
Serviceability features: Easy-access doors. Unit can be serviced from three sides.
Technical support: See Website (www.dectron.com).
Technical support materials: Upon request.
Noise-reduction features: 1- to 2-inch insulation.
IAQ equipment supported: Chloraguard (chloramine air filter).
Thermostat compatibility: Proprietary controls
Replacement parts compatibility: None.
Additional features: Dectron is the pioneer in mechanical dehumidification.
Warranty information: 25 months
Special installation requirements: Manufacturer did not specify.
Contact: Dectron, Montreal; attn: Matthew Balcer, 514-336-3330; 514-337-3336 (fax); mbalcer@dectron.com; www.dectron.com.
eProduct 179
Ducane
Model:2AC13 split systemFootprint (inches): 30 by 30
Serviceability features: Louvered and nonlouvered coil protection options, hinged access panel, direct straight line sets, service valves mounted at 45-degree angles, molded compressor plugs.
Technical support: Manufacturer did not specify.
Technical support materials: Wiring diagrams, service/troubleshooting information, installation data, parts, and part numbers.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: Hinged access panel swings out of the way for access to controls and internal unit. Basket-style fan guard for quiet operation, and louvered and nonlouvered coil protection options.
Warranty information: Five-year compressor, five-year parts.
Special installation requirements: All piston match with highest sales volume.
Contact: Ducane, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.
eProduct 180
Model: 2SH13 rooftop
Footprint (inches): 36 by 65
Serviceability features: Two-screw access to control panel, LED diagnostics on control board, service valves mounted high within the service panel, motor serviceable with-out removing the complete blower housing, all wires pulled to the far outside of unit and connection point. Quiet shift defrost option.
Technical support: Manufacturer did not specify.
Technical support materials: Wiring diagrams, service/troubleshooting information, installation data, parts, and part numbers.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Internal filter kit available that will hold a 1-, 2-, or 4-inch air filter.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: All Copeland scroll compressors. LED diagnostic control board, 13 SEER efficiency, service valves mounted high inside the control panel, quiet shift defrost option.
Warranty information: Five-year compressor, five-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: Ducane, Columbia, S.C.; attn: Brian Holdrich, 803-750-6523; 803-750-6525 (fax); brian.holdrich@alliedair.com.
eProduct 181
EMI
Model:America Series ductless split systemFootprint (inches): Varies
Serviceability features: Side discharge/vertically arranged condenser; Duratec compressor protection package; suction accumulator; filter-drier; loss-of-charge switch; evaporator unit mount control (optional hand held); motorized supply louvers; integral condensate pump safety-switch connection; condensate drain pan overflow protection; anti-short-cycle protection; and dry mode for humidity control (optional electric heat).
Technical support: Available Monday through Friday from 8 a.m. to 5 p.m. Eastern time at 800-228-9364.
Technical support materials: All available.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Cleanable filters.
Thermostat compatibility: Compatible with most wall thermostats.
Replacement parts compatibility: Designed for parts commonality.
Additional features: Cooling-only and heat pump models available; optional electric heat; easy condensate pump installation; designed for easy access to internal components; Duratec compressor protection package.
Warranty information: One-year parts, five-year compressor.
Special installation requirements: None.
Contact: EMI, Rome, N.Y.; attn: Mark Odell, 800-228-9364; 800-232-9364 (fax); emi@enviromaster.com; www.enviromaster.com.
eProduct 182
Fedders
Model:13 SEER split systemFootprint (inches): 27 to 39 (h) by 22 to 30 (w) by 22 to 30 (d)
Serviceability features: New louvered jacket comes with a removable top grille for easy serviceability. Service valves are positioned for quick installation and service as well as an easy-access control box. High-quality appliance finish is easy to clean and maintain.
Technical support: Available at 866-829-2440, Monday through Friday, from 7:30 a.m. to 4:30 p.m. Central time.
Technical support materials: Spec sheet, sell sheet, mechanical specs, wiring diagram, installation-operation manual, exploded parts list.
Noise-reduction features: Quiet top-discharge cabinet; PSC motor resilient mounted for vibration-free operation.
IAQ equipment supported: Full line of media and electronic air filters, as well as whole-house humidifiers, provide proper humidification and filtration to improve IAQ.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Majority of replacement parts are interchangeable. Common replacement parts.
Additional features: These units have some of the smallest footprints in the industry, so they are highly economical to transport, warehouse, and install, saving distributors thousands of dollars, the company says. Units come with a high-end appliance finish for easy care and maintenance. Fedders products provide value and high quality at competitive prices, the company says.
Warranty information: Five-year limited.
Special installation requirements: TXVs comes standard with 13 SEER cased coils and air handlers.
Contact: Fedders, Liberty Corner, N.J.; attn: Beth Marotta, 908-604-8686; 908-604-0715 (fax); sales@fedders.com; www.fedders.com.
eProduct 183
Model: PTAC and PTHP products
Footprint (inches): Fits industry-standard 16- by 42-inch wall sleeves.
Serviceability features: Electronic self-diagnostics include an easy-to-read digital readout that takes the guesswork out of servicing. Easy removal of decorative front.
Technical support: Available at 866-829-2440, Monday through Friday, from 7:30 a.m. to 4:30 p.m. Central time.
Technical support materials: Spec sheet, submittal drawings, wiring diagrams, installation-operation manual, exploded parts list.
Noise-reduction features: Tangential blower wheel and motor design provide quiet operation and economical performance. Sound-reducing compressor blankets allow extra-quiet operation. Fully insulated bulkhead prevents outdoor sound transmission.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with common four- and five-wire remote thermostats.
Replacement parts compatibility: Majority of the replacement parts are interchangeable. Shares common replacement parts.
Additional features: Some of the quietest lines of PTAC and PTHP products on the market, loaded with features many manufacturers charge extra for, including wireless remote, industry's first center-mount controls, digital temperature readout, fully insulated bulkhead, sound-reducing compressor blanket, etc., the company says; Fedders products provide value and high quality at competitive prices.
Warranty information: One-year parts and labor, five-year compressor.
Special installation requirements: Manufacturer did not specify.
Contact: Fedders, Liberty Corner, N.J.; attn: Beth Marotta, 908-604-8686; 908-604-0715 (fax); sales@fedders.com; www.fedders.com.
eProduct 184
Friedrich Air Conditioning
Model:M18CF ductless split systemFootprint (inches): 31 by 11 by 8 (indoor); 31 by 23 by 12 (outdoor)
Serviceability features: Easy-access lift out, cleanable air filter. Removable front panel. Factory-installed access ports.
Technical support: Friedrich customer service is available from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Operating manual, service parts manual, installation manual.
Noise-reduction features: Outdoor condensing unit and tangential indoor blower wheel means these systems are ultra quiet indoors.
IAQ equipment supported: Washable, reusable filters. Variable-speed motors and variable-capacity compressor for improved air circulation and dehumidification.
Thermostat compatibility: Factory-supplied; programmable remote control.
Replacement parts compatibility: Some commonality with other Friedrich models.
Additional features: Advanced inverter technology delivers variable-capacity advantages, allowing each system to adjust capacity and cooling output as needed for greater efficiency and temperature precision with the added benefit of reducing energy costs, the company says. Ultra-high SEER rating and ozone-friendly R-410A are environmental selling points.
Warranty information: One-year parts, five-year compressor.
Special installation requirements: Refrigeration line sets in either 15- or 35-foot lengths from the factory (up to 98-feet field supplied).
Contact: Friedrich Air Conditioning, San Antonio, Texas; attn: Bernadette Moody, 800-541-6645, ext. 494; hvac@friedrich.com; www.friedrich.com.
eProduct 185
Model: M27TYF-M36TYF2 tri-zone ductless split system
Footprint (inches): 31 by 11 by 8 (indoor); 35 by 33 by 13 (outdoor)
Serviceability features: Easy-access lift out, cleanable air filter. Removable front panel. Factory-installed access ports.
Technical support: Friedrich customer service available from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Operating manual, service parts manual, installation manual.
Noise-reduction features: Outdoor condensing unit and tangential indoor blower wheel means these systems are ultra-quiet indoors, the company says.
IAQ equipment supported: Washable, reusable filters. Variable-speed motors and variable-capacity compressor for improved air circulation and dehumidification.
Thermostat compatibility: Factory supplied programmable remote control.
Replacement parts compatibility: Some commonality with other Friedrich models.
Additional features: Flexibility; mix and match a single outdoor unit with three different combinations of indoor units to achieve cooling capacities of 27,600, 30,400, 33,000, or 35,200 Btuh. Advanced inverter technology delivers greater energy efficiency and temperature precision with the added benefit of reducing energy costs. Ultra-high SEER rating and ozone-friendly R-410A are great environmental selling points, the company says.
Warranty information: One-year parts, five-year compressor.
Special installation requirements: Refrigeration line sets in either 15- or 35-foot lengths from the factory (up to 98-feet field supplied).
Contact: Friedrich Air Conditioning, San Antonio, Texas; attn: Bernadette Moody, 800-541-6645, ext. 494; hvac@friedrich.com; www.friedrich.com.
eProduct 186
Frigidaire
Model:FS4BI split systemFootprint (inches): 31 by 31
Serviceability features: Easy compressor and control access. Easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.
Technical support: Technical service group available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Frigidaire dealers can access technical literature library by logging onto the online dealer extranet (www.frigidaire.net).
Noise-reduction features: Sound-absorbing base, swept-wing fan blade, and compressor sound blanket help reduce unwanted noise.
IAQ equipment supported: EAC's, humidifiers, compatible with Frigidaire zoning.
Thermostat compatibility: A special thermostat/controller is an integral part of the system.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: The iQ Driveâ„¢ system features fully variable-speed compressor technology and variable-speed indoor and outdoor motors; the system provides variable cooling capacity as needed to meet comfort requirements; and iQ Drive provides unprecedented efficiencies to homeowner - the highest SEER ratings in the industry, the company says.
Warranty information: Standard eight-year all parts, 10-year compressor. Five-year quality pledge to replace the unit if the compressor fails in the first five years when installed with a matched indoor coil or air handler.
Special installation requirements: An electronic expansion valve is part of the indoor evaporator. Training and certification are required to work on the iQ Drive inverter system.
Contact: Frigidaire, O'Fallon, Mo.; attn: Marc DeLaurent, 636-561-7300; 636-561-7399 (fax); delaurentm@nordyne.com; www.frigidaire.net.
eProduct 187
Model: Q4SD-060K packaged heat pump
Footprint (inches): 48 by 56
Serviceability features: High and low service ports provide quick access without disrupting operation.
Technical support: Technical service group available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Installation instructions, wiring diagram, technical sales literature, and replacement parts list.
Noise-reduction features: Custom venturi condenser fan.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shared parts.
Additional features: Heavy-gauge, full-perimeter base rails; convertible air delivery; TXV factory installed.
Warranty information: Eight-year limited parts, five-year quality pledge.
Special installation requirements: None.
Contact: Frigidaire, O'Fallon, Mo.; attn: Matt Lattanzi, 636-561-7469; 636-561-7399 (fax); lattanzim@nordyne.com; www.frigidaire.net.
eProduct 188
Fujitsu General America
Model:Halcyon Systems 18CL/18RL ductless split system cooling only/heat pumpFootprint (inches): 11 (h) by 31 (w) by 9 (d)
Serviceability features: LED lights on indoor unit display blinking light error codes. A new, optional wired remote control displays error codes in alphanumeric characters for easier troubleshooting and diagnostics.
Technical support: Toll-free service hotline is available from 9 a.m. to 5 p.m. Eastern time at 866-952-8324.
Technical support materials: Operation manual, installation manual, service manual, and detailed specs available on Website.
Noise-reduction features: Up to 6 dB quieter on the indoor unit and up to 5 dB quieter on the outdoor unit.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Unit comes with a programmable remote control.
Replacement parts compatibility: Replacement parts are shared.
Additional features: High SEER (19.0), environmentally friendly R-410A, wireless remote control, optional wired remote controller, 24-hour timer, dry mode, auto restart/reset, low ambient. More than 30 percent smaller than competing units, making them easier to install in more locations, the company says.
Warranty information: Two-year parts, six-year compressor.
Special installation requirements: None.
Contact: Fujitsu General America, Fairfield, N.J.; attn: Roy Kuczera, 973-575-0380; 973-836-0447 (fax); hvac@fujitsugeneral.com; www.fujitsugeneral.com.
eProduct 189
Model: Halcyon Universal Systems 18RULX/24RULX ductless heat pump
Footprint (inches): 8 (h) by 39 (w) by 26 (d)
Serviceability features: LED lights on indoor unit display blinking light error codes. A new, optional wired remote control displays error codes in alphanumeric characters for easier troubleshooting and diagnostics.
Technical support: Toll-free service hotline is available from 9 a.m. to 5 p.m. Eastern time at 866-952-8324.
Technical support materials: Operation manual, installation manual, service manual, and detailed specs available on Website.
Noise-reduction features: Indoor units are up to 9 dB quieter with the new quiet mode. Outdoor units are up to 6 dB quieter.
IAQ equipment supported: Ion filter deodorizes by decomposing absorbed odors using the oxidizing and reducing effects of ions generated by the ultra-fine particle ceramic. "Apple Catechin" filter absorbs dust, mold spores, and microorganisms onto the filter by static electricity; growth is inhibited and deactivated by polyphenols extracted from apples.
Thermostat compatibility: Unit comes with programmable remote control.
Replacement parts compatibility: Replacement parts are shared.
Additional features: High SEER (15.0 to 16.0), environmentally friendly R-410A. Universal mount can be mounted low on the floor or wall, or transverse mounted onto the ceiling. Fresh air intake, wireless remote control, optional wired remote controller, 24-hour timer, dry mode, auto restart/reset, low ambient.
Warranty information: Two-year parts, six-year compressor.
Special installation requirements: None.
Contact: Fujitsu General America, Fairfield, N.J.; attn: Roy Kuczera, 973-575-0380; 973-836-0447 (fax); hvac@fujitsugeneral.com; www.fujitsugeneral.com.
eProduct 190
Gibson
Model:D*(4,5)BD Series split systems, heat pumpsFootprint (inches): 31 by 31
Serviceability features: Five-minute restart time delay; easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.
Technical support: Technical service group is available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: All technical literature (wiring diagrams, technical sales literature, installation instructions, etc.) available online (www.nordyne.com, password required).
Noise-reduction features: One-piece top orifice and heavy-duty PSC motor provide quiet operation.
IAQ equipment supported: Variable indoor section improves humidity control and can compensate for inadequate duct design, the company says.
Thermostat compatibility: Standard thermostats.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: Manufacturer did not specify.
Warranty information: Five-year all parts, one-year quality pledge to replace the unit should it fail in the first five years when installed with a matched Gibson indoor coil or air handler. Extended protection plans are available.
Special installation requirements: None.
Contact: Gibson, O'Fallon, Mo.; attn: Marc DeLaurent, 636-561-7477; 636-561-7365 (fax); delaurentm@nordyne.com; www.nordyne.com.
eProduct 191
Heil
Model:QuietComfort DX 1300 split systemFootprint (inches): 31 to 35 (w) by 32 to 37 (d)
Serviceability features: Three-piece grille panels are easy to remove separately to view and clean. Easy-access panel to compressor, internal components. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for access to components (plug and play); control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.
Technical support: A technical service advisor is on staff at local distributors for technical assistance, troubleshooting. Technical training available at ICP mobile training centers nationwide and at field schools held at participating distributors.
Technical support materials: Product information posted online at Heil dealer Website (www.heildlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors, compressor sound jackets, and two-speed fan motors to produce minimal sound at maximum performance.
IAQ equipment supported: A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Standardized parts throughout the line.
Additional features: Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. New air management system (AMS) improves performance without increasing sound. Corner posts with grille panels add strength to the unit and reduce noise and vibration. Tight wire coil guard with 3/8 -inch spacing provides protection with optimal airflow.
Warranty information: 10-year limited compressor, five-year limited parts. R-410A model qualifies for the Heil five-year No-Hassle Replacement warranty. R-22 model qualifies for a one-year No-Hassle Replacement warranty. (If the compressor fails within the specified number of covered years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Heil products: the optional Homeowner's Extended Labor Plan (HELP) offers five- and 10-year plans.
Special installation requirements: TXV expansion devices recommended for maximum system reliability.
Contact: Heil, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.heil-hvac.com.
eProduct 192
Model: QuietComfort DX 1400 split system
Footprint (inches): 31 to 35 (w) by 32 to 37 (d)
Serviceability features: Three-piece grille panels are easy to remove separately to view and clean. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for access to components (plug and play); control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.
Technical support: A technical service advisor is on staff at local distributors for technical assistance, troubleshooting. Technical training available at ICP mobile training centers nationwide and at field schools held at participating distributor locations.
Technical support materials: Product information posted online at Heil dealer Website (www.heildlr.com), including product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors, compressor sound jackets, and two-speed fan motors to produce minimal sound at maximum performance.
IAQ equipment supported: A full line of IAQ products include filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Standardized parts throughout the line.
Additional features: Tight wire coil guard with 3/8-inch spacing provides protection with optimal airflow. Corner posts with grille panels add strength to the unit and reduce noise and vibration. New air management system (AMS) improves performance without increasing sound. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions.
Warranty information: 10-year limited compressor, seven-year limited outdoor coil, five-year limited parts. This product qualifies for the Heil seven-year No-Hassle Replacement warranty. (If the compressor or covered coil fails within seven years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Heil products. The optional Homeowner's Extended Labor Plan (HELP) offers five- and 10-year plans.
Special installation requirements: TXV devices recommended for system reliability.
Contact: Heil, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.heil-hvac.com.
eProduct 193
Hydronika
Model:C Series outdoor chillerFootprint (inches): 280 square
Serviceability features: Chiller (compressor) may be run with service panels open without false readings. Electrical circuits are illuminated as to function. Single point of connection. No component removal required to access all functions. All parts available at any major wholesaler, the company says.
Technical support: Service support available nationwide through manufacturers' representatives.
Technical support materials: Installation and operation manual in each unit.
Noise-reduction features: Eight-bladed, shallow-pitch composite fan. Separated mechanical spaces designed into the overall unit for sound attenuation.
IAQ equipment supported: None.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Common items in all C Series models.
Additional features: Uses no proprietary parts. All components are available at any major wholesaler in the United States. All Hydronika chillers can be ordered as combination chiller-boilers.
Warranty information: Two-year parts, whole unit.
Special installation requirements: None.
Contact: Hydronika, Las Vegas; attn: Michael Scharing, 760-484-3368; 888-221-6573 (fax); mscharing@hydronika.com; www.hydronika.com.
eProduct 194
Kelvinator
Model:P3RD-048K packaged air conditionerFootprint (inches): 49 by 35
Serviceability features: Access provided for all major components.
Technical support: Available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 5 p.m. Central time.
Technical support materials: Installation instructions, wiring diagram, technical sales literature, replacement parts list.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares parts.
Additional features: Small footprint, round duct connections.
Warranty information: Five-year limited.
Special installation requirements: None.
Contact: Kelvinator, O'Fallon, Mo.; attn: Matt Lattanzi, 636-561-7469; 636-561-7399 (fax); lattanzim@nordyne.com; www.nordyne.com.
eProduct 195
Lennox Industries
Model:XC15 and XP15 split system and heat pumpFootprint (inches): 39 by 36 by 37
Serviceability features: Built for serviceability. These units are built in the industry-leading Dave Lennox Signature Collectionâ„¢ cabinet with the exclusive SmartHingeâ„¢ design, the company says; the only unit with easy access and serviceability to the condenser coil. The DLSC design also allows for easy access to the compressor and controls without having to shut down unit operation.
Technical support: Available at 800-453-6669 (800-4LENNOX).
Technical support materials: Technical literature is available (www. Davenet.com).
Noise-reduction features: Exclusive compressor sound-reduction technology.
IAQ equipment supported: Humiditrol® whole-house dehumidification system.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares parts.
Additional features: The XC15 and XP15 are "the quietest air conditioners and heat pumps you can buy," the company says. "They are industry leaders in single-stage efficiency with efficiency ratings up to 16.5 SEER." The XC15 and XP15 are also equipped with an exclusive SmartHinge design for quicker and easier service of the condenser coil.
Warranty information: 10-year compressor, 10-year parts.
Special installation requirements: None.
Contact: Lennox Industries, Richardson, Texas; attn: Mike Miles, 972-497-5000; mike.miles@lennoxind.com; www.lennox.com.
eProduct 196
LG Electronics
Model:LA121HNP ductless heat pumpFootprint (inches): 24 by 24 by 6 (indoor); 31 by 22 by 10 (outdoor)
Serviceability features: Both indoor and outdoor units can be serviced using only a Phillips head screwdriver, the company says. Filter access indoors is achieved by lifting the "picture panel."
Technical support: Available Monday through Friday from 8 a.m. to 5 p.m. at 800-243-0000.
Technical support materials: Installation instructions and service manuals (parts breakdowns in service manuals).
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Four-layer plasma air filter (includes an antibacterial filter, plasma ionizer, plasma microdust filter, and plasma deodorizing filter).
Thermostat compatibility: Units come with external remote control thermostat.
Replacement parts compatibility: Shares many common parts with other LG models.
Additional features: Unit has a fully customizable indoor evaporator that includes a picture panel that allows the end user to insert any picture, company logo, or wallpaper into the easily opened front frame. The unit look can be changed as often as the end user chooses.
Warranty information: Three-year parts only, five-year compressor.
Special installation requirements: None.
Contact: LG Electronics, Englewood Cliffs, N.J.; attn: Steve Schmitt, 201-266-2496; 201-816-3417 (fax); sschmitt@lge.com; www.lgusa.com.
eProduct 197
Model: LS180HE ductless heat pump
Footprint (inches): 43 by 12 by 8 (indoor); 35 by 26 by 13 (outdoor)
Serviceability features: Both indoor and outdoor units can be serviced using a Phillips head screwdriver. Filter access on the indoor unit is achieved by lifting the front panel.
Technical support: Available Monday through Friday from 8 a.m. to 5 p.m. at 800-243-0000.
Technical support materials: Installation instructions and service manuals (parts breakdowns in service manuals).
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Triple-filter air-purifying system (easy-clean electrostatic filter and two carbon filters).
Thermostat compatibility: Comes with external remote control thermostat.
Replacement parts compatibility: Shares many common parts with other LG models.
Additional features: This 13 SEER unit with R-410A has a smooth front panel with a full LED display. A manual on-off button on the front panel allows the unit to be operated if the remote control is misplaced.
Warranty information: Two-year parts only, five-year compressor.
Special installation requirements: The indoor unit operates using 36 vdc, so no line voltage is required. Line voltage is only needed for the outdoor unit.
Contact: LG Electronics, Englewood Cliffs, N.J.; attn: Steve Schmitt, 201-266-2496; 201-816-3417 (fax); sschmitt@lge.com; www.lgusa.com.
eProduct 198
Luxaire - UPG York
Model:Acclimate Series packaged unitFootprint (inches): 49 (d) by 47 (w) by 33 (h)
Serviceability features: A large, single panel covers the electrical and gas controls, making servicing easier. The blower compartment has an additional large panel with a built-in handle tab. Removing this panel allows the blower assembly to slide-out for easy removal for maintenance and ease of troubleshooting.
Technical support: First level of support provided by distributor; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern time.
Technical support materials: A technical guide, installation manual, submittal data sheet, and user manual are available on Luxaire's Website (www.luxaire.com).
Noise-reduction features: The compressor has internal isolation and sound muffling to minimize vibration and noise. The compressor is externally isolated on a dedicated, independent mounting. This unit also uses a swept-wing fan design and high-efficiency scroll compressor technology to provide quiet, energy-efficient operation that delivers precise temperature and humidity control, the company says.
IAQ equipment supported: Compatible with a complete line of Luxaire IAQ products, including ventilation systems, UV air treatment, electronic and media air cleaners, and humidifiers.
Thermostat compatibility: Units are designed to operate with 24-V electronic and electromechanical thermostats. All units can operate with single-stage heat/single-stage cool thermostats, with or without the economizer.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: Uses environmentally friendly R-410A and is Energy Star® qualified.
Warranty information: Five-year parts, 10-year compressor.
Special installation requirements: None
Contact: Luxaire - UPG York, Norman, Okla.; attn: Tim Lashar, 405-419-6419; 405-419-6545 (fax); tim.lashar@york.com; www.luxaire.com.
eProduct 199
Model: [mc]2 MicroChannel MiniCube split system
Footprint (inches): 22 by 22
Serviceability features: Features fully exposed refrigerant connections and a single panel covering the electrical controls for servicing. Secured, reusable service valves on both the liquid and vapor sweat connections make evacuating and charging easier.
Technical support: First level of support provided by distributor; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern time.
Technical support materials: A full technical guide with wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions is available upon request.
Noise-reduction features: Top discharge blows warm air up and away from the structure and surrounding landscape and minimizes operating sounds. A rigid top panel, cushioned compressor mounts, and rippled condenser coil fins further reduce the unit's operating sound level.
IAQ equipment supported: Compatible with a complete line of Luxaire residential IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: According to the manufacturer, the smallest 13 SEER product in the industry uses aluminum microchannel coil technology to provide higher efficiency and greater capacity, without a corresponding increase in coil surface area. This technology reduces the size of the unit compared to traditional 13 SEER products, and uses less refrigerant.
Warranty information: Five-year limited parts, five-year compressor.
Special installation requirements: So small and lightweight that it can be installed by one service technician, the company says. The indoor coil requires a thermostatic expansion valve to ensure proper refrigerant flow.
Contact: Luxaire - UPG York, Norman, Okla.; attn: Tim Lashar, 405-419-6419; 405-419-6545 (fax); tim.lashar@york.com; www.luxaire.com.
eProduct 200
Maytag
Model:PSA4BI split systemFootprint (inches): 31 by 31
Serviceability features: Easy compressor and control access. Easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.
Technical support: Technical service group is available at 866-262-9824 (866-2MAYTAG) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Maytag dealers can access technical literature library by logging into the online dealer extranet (www.maytaghvac.com).
Noise-reduction features: Sound-absorbing base, swept-wing fan blade, and compressor sound blanket all help reduce unwanted noise.
IAQ equipment supported: EAC's, humidifiers, compatible with Maytag zoning.
Thermostat compatibility: A special thermostat/controller is an integral part of the system.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: The iQ Driveâ„¢ system features fully variable-speed compressor technology and variable-speed indoor and outdoor motors; the system provides variable cooling capacity as needed to meet comfort requirements; and the iQ Drive provides unprecedented efficiencies to the homeowner - the highest SEER ratings in the industry, the company says.
Warranty information: Standard eight-year all parts, 10-year compressor. Five-year dependability promise to replace the unit if the compressor fails in the first five years when installed with a matched indoor coil or air handler.
Special installation requirements: An electronic expansion valve is part of the indoor evaporator. Training and certification are required to work on the iQ Drive inverter system.
Contact: Maytag, O'Fallon, Mo.; attn: Marc DeLaurent, 636-561-7300; 636-561-7399 (fax); delaurentm@nordyne.com; www.maytaghvac.com.
eProduct 201
Model: PS(A,H)4BF split systems, heat pumps
Footprint (inches): 31 by 31
Serviceability features: Easy compressor and control access. Five-minute anti-short-cycle protection; easy-access full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.
Technical support: Technical service group is available at 866-262-9824 (866-2MAYTAG) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: All technical literature (wiring diagrams, technical sales literature, installation instructions, etc.) available online (www.maytaghvac.com; dealer password required; must be a Maytag HVAC dealer).
Noise-reduction features: One-piece top orifice and heavy-duty PSC motor provide quiet operation. Includes sound blanket and new swept-wing fan blade. New sound-absorbing base pans.
IAQ equipment supported: Variable-speed air handlers are available with a special dehumidification function; Maytag whole-home IAQ products include HEPA air cleaners, electronic air cleaners, electronic air filters, UV lights, and humidifiers.
Thermostat compatibility: Two-stage thermostat recommended for optimum performance.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: Includes high- and low-pressure switches; discharge thermostat; liquid line drier; durable, attractive, stainless steel louvered cabinet to protect unit from debris.
Warranty information: 10-year parts and labor. Five-year dependability promise to replace the unit if the compressor fails in the first five years when installed with a matched Maytag indoor air handler or coil.
Special installation requirements: None.
Contact: Maytag, O'Fallon, Mo.; attn: Marc Delaurent, 636-561-7477; 636-561-7365 (fax); delaurentm@nordyne.com; www.maytaghvac.com.
eProduct 202
Mitsubishi Electric
Model:City Multi S Series PUMY-P48NHMU ductless heat pumpFootprint (inches): 53 by 37 by 14
Serviceability features: The outdoor unit's four-digit display speeds up the servicing process by providing a fault code and history. It also allows more than 250 items of operation information to be displayed.
Technical support: On the West Coast call 800-811-3114; on the East Coast call 800-811-3115; in the Midwest call 678-376-2932 (hours vary)
Technical support materials: Diagrams, troubleshooting FAQs, installation instructions, and spec sheets available online (www.mehvac.com).
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Lossnay® ERVs recapture cooling and heating energy, control humidity extremes, and are compatible with City Multi HVAC systems. In addition to helping equalize humidity levels and removing indoor pollutants, Lossnay ERVs are an efficient and effective step toward improving overall indoor environmental quality.
Thermostat compatibility: Requires City Multi thermostat.
Replacement parts compatibility: Every item is unique.
Additional features: Offers all the features and benefits of Mitsubishi's large commercial City Multi Y-Series to small offices and homes; a single-phase outdoor unit with VRFZ technology and City Multi controls network cools or heats all zones with a variety of indoor unit styles. The unit can offer up to 130 percent connected capacity.
Warranty information: Six-year limited outdoor unit, one-year parts. Diamond Dealers receive two-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: Mitsubishi Electric, Suwanee, Ga.; attn: Mike Smith, 800-687-1966; 800-658-1458 (fax); msmith@hvac.mea.com; www.mehvac.com.
eProduct 203
Model: Mr. Slim MXZ-3A30NA multi-indoor unit inverter split ductless system
Footprint (inches): 35 by 35 by 13
Serviceability features: Optional interface provides the ability to tie M-Series product into the City Multi controls network, allowing all building HVAC systems and components to be centrally controlled and serviced.
Technical support: On the West Coast call 800-811-3114; on the East Coast call 800-811-3115; in the Midwest call 678-376-2932 (hours vary)
Technical support materials: Diagrams, troubleshooting FAQs, installation instructions, and spec sheets available online (www.mehvac.com).
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Anti-allergy enzyme filter uses artificial blue enzyme catalyst on the filter to capture microbes. Hybrid catechin prefilter fibers have antiviral and antioxidant properties. Compatible with Lossnay ERVs, which recapture cooling and heating energy, equalize humidity levels, and remove harmful indoor pollutants.
Thermostat compatibility: Requires Mr. Slim control component.
Replacement parts compatibility: Every item is unique.
Additional features: Ability to cool and heat different spaces quietly and efficiently; 1°F temperature setting control allows more precise temperature control, improved individual comfort. Anti-allergy and hybrid catechin deodorizing filters; "econo cool" mode allows temperature to be 2° higher without losing comfort, saving up to 20 percent in energy costs.
Warranty information: Six-year limited outdoor unit, one-year parts. Diamond Dealers receive two-year parts.
Special installation requirements: Manufacturer did not specify.
Contact: Mitsubishi Electric, Suwanee, Ga.; attn: Mike Smith, 800-687-1966; 800-658-1458 (fax); msmith@hvac.mea.com; www.mehvac.com.
eProduct 204
Philco
Model:J(S,T)5BD Series split systemFootprint (inches): 31 by 31
Serviceability features: Easy compressor and control panel access. Easy access full service refrigerant valves and removable top-grille assembly for quick service without disconnecting fan motor leads.
Technical support: Available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: All technical support material is available to contractors 24 hours a day (www.nordyne.com, password required).
Noise-reduction features: One-piece top orifice provides quiet operation.
IAQ equipment supported: Variable-speed kit can be field installed for increased indoor air comfort.
Thermostat compatibility: Standard thermostat.
Replacement parts compatibility: Shares parts with others in the line.
Additional features: Complete full metal jacket provides a durable and attractive cabinet that protects the coil.
Warranty information: Five-year all parts. Extended protection plans available.
Special installation requirements: None.
Contact: Philco, O'Fallon, Mo.; attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax) delaurentm@nordyne.com; www.nordyne.com.
eProduct 205
Rheem
Model:RAND Classic Series condensing unitFootprint (inches): 33 by 23 by 19
Serviceability features: Equipped with the industry-leading Rheem durable wraparound hail guard steel jacket for maximum coil protection. Service accessibility is the simplest and easiest in the industry, the company says. Two fasteners are easily removed for fast entry to all critical service points, controls, and compressors.
Technical support: Technical support is available from all Rheem distributors, Rheem district technical representatives, online (www.rheemote.net), or ProStock parts stores.
Technical support materials: Support materials available online (www.rheemote.net and www.kwikpro.com).
Noise-reduction features: The Copeland scroll compressor is externally mounted on rubber grommets to reduce vibration and noise. The single-piece, drawn top deck, venturis, and wire grill contribute to a sleek appearance and reduction in operational noise and vibration.
IAQ equipment supported: Rheem offers a combination of carefully matched components specially designed to improve IAQ, including antibacterial UV systems, ERV/HRV systems, electronic air cleaners, and humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: All parts are interchangeable.
Additional features: All models feature a smooth-line, low-profile cabinet design that blends attractive styling with features that significantly decrease the amount of time needed to install or service, the company says. The durable, wrap-around, all-steel, fully louvered cabinet provides maximum coil protection from yard hazards and weather extremes.
Warranty information: Five-year limited all parts. Extended warranties available through Protection Plus.
Special installation requirements: Straight installation. No special requirements needed.
Contact: Rheem, Fort Smith, Ark.; attn: Customer Service Representatives, 479-646-4311; 479-648-4918 (fax); info@rheemac.com; www.rheemac.com.
eProduct 206
Model: RANL Classic Series condensing unit
Footprint (inches): 35 by 23 by 19
Serviceability features: Equipped with durable wrap-around hail guard steel jacket for maximum coil protection. Service accessibility is the simplest and easiest in the industry, the company says. Two fasteners are removed for fast entry to all critical service points, controls, and compressors.
Technical support: Technical support available from all Rheem distributors, Rheem district technical representatives, online (www.rheemote.net), or ProStock parts stores.
Technical support materials: Support materials available through www.rheemote.net and www.kwikpro.com.
Noise-reduction features: The Copeland scroll compressor is externally mounted on rubber grommets to reduce vibration and noise. The single-piece, drawn top deck, venturis, and wire grill, contributes to a sleek appearance and a reduction in operational noise and vibration.
IAQ equipment supported: Rheem offers a combination of carefully matched components specially designed to improve IAQ, including antibacterial UV systems, ERV/HRV systems, electronic air cleaners, and humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: All parts are interchangeable.
Additional features: All models feature a smooth-line, low-profile cabinet design that blends attractive styling with features that decrease the amount of time needed to install or service, the company says. The durable, wrap-around, all-steel, fully louvered cabinet provides coil protection from yard hazards and weather extremes.
Warranty information: Five-year limited all parts. Extended warranties available through Protection Plus.
Special installation requirements: Straight installation. No special requirements.
Contact: Rheem, Fort Smith, Ark.; attn: Customer Service Representatives, 479-646-4311; 479-648-4918 (fax); info@rheemac.com; www.rheemac.com.
eProduct 207
Robur
Model:AYF60-119 gas-fired chiller-heaterFootprint (inches): 49 by 49
Serviceability features: Unit contains microprocessor control, which serves as a self-diagnostic center for the unit. Complete with LED readout to display leaving water temperature and diagnostic codes to assist technician at time of start-up and service.
Technical support: Available at 812-424-1800 from 8 a.m. to 5 p.m., Monday through Friday, except holidays.
Technical support materials: Product specs and installation/start-up manual, which includes wiring diagram.
Noise-reduction features: Normally not required.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares parts.
Additional features: Combines an air-cooled absorption chiller with a high-efficiency low-pressure boiler integrated into one outdoor unit. A boiler room and venting are avoided, allowing maximum utilization of indoor space. The unit's primary energy source is natural or propane gas, resulting in minimal electrical service requirements. Two- and four-pipe versions available.
Warranty information: One year limited.
Special installation requirements: None.
Contact: Robur, Evansville, Ind.; attn: Richard Halbig, 812-424-1800; 812-422-5117 (fax); rhalbig.servel@sbcglobal.net; www.robur.com.
eProduct 208
Model: GAHP-AR gas-fired air-source heat pump
Footprint (inches): 34 by 49
Serviceability features: Unit contains microprocessor control, which serves as a self-diagnostic center for the unit. Complete with LED readout to display leaving water temperature and diagnostic codes to assist technician at time of startup and service.
Technical support: Available at 812-424-1800 from 8 a.m. to 5 p.m., Monday through Friday, except holidays.
Technical support materials: Product specs and installation/startup manual includes wiring diagram.
Noise-reduction features: Normally not required.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares parts.
Additional features: This gas-fired absorption heat pump uses natural or propane gas as its primary energy source. It produces chilled water for cooling and hot water for heating, allowing exceptional application flexibility.
Warranty information: One year limited.
Special installation requirements: None.
Contact: Robur, Evansville, Ind.; attn: Richard Halbig, 812-424-1800; 812-422-5117 (fax); rhalbig.servel@sbcglobal.net; www.robur.com.
eProduct 209
Ruud
Model:UAND Achiever Series condensing unitFootprint (inches): 33 by 23 by 19
Serviceability features: Equipped with durable wrap-around hail guard steel jacket for maximum coil protection. Service accessibility is the simplest and easiest in the industry, the company says. Two fasteners are removed for entry to all critical service points, controls, and compressors.
Technical support: Technical support is available from all Ruud distributors, Ruud district technical representatives, online (www.rheemote.net), or ProStock parts stores.
Technical support materials: Support materials available online (www.rheemote.net and www.kwikpro.com).
Noise-reduction features: The Copeland scroll compressor is externally mounted on rubber grommets to reduce vibration and noise. The single-piece, drawn top deck, venturis, and wire grill contribute to a sleek appearance and reduction in operational noise and vibration.
IAQ equipment supported: Ruud offers a combination of carefully matched components specially designed to improve IAQ, including antibacterial UV systems, ERV/HRV systems, electronic air cleaners, and humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: All parts are interchangeable.
Additional features: All models feature a smooth-line, low-profile cabinet design that blends attractive styling with features that significantly decrease the amount of time needed to install or service. The durable, wrap-around, all-steel, fully louvered cabinet provides maximum coil protection from yard hazards and weather extremes.
Warranty information: Five-year limited all parts. Extended warranties available through Protection Plus.
Special installation requirements: Straight installation. No special requirements.
Contact: Ruud, Fort Smith, Ark.; attn: Customer Service Representatives, 479-646-4311; 479-648-4918 (fax); info@ruudac.com; www.ruudac.com.
eProduct 210
Model: UANL Achiever Series condensing units
Footprint (inches): 35 by 23 by 19
Serviceability features: Equipped with durable wrap-around hail guard steel jacket for maximum coil protection. Service accessibility is the simplest and easiest in the industry, the company says. Two fasteners are removed for entry to all critical service points, controls, and compressors.
Technical support: Technical support is available from all Ruud distributors, district technical representatives, online (www.rheemote.net), or ProStock parts stores.
Technical support materials: Support materials available through www.rheemote.net and www.kwikpro.com.
Noise-reduction features: The Copeland scroll compressor is externally mounted on rubber grommets to reduce vibration and noise. The single-piece, drawn top deck, venturis, and wire grille contribute to a sleek appearance and reduction in operational noise and vibration.
IAQ equipment supported: Ruud offers a combination of carefully matched components specially designed to improve IAQ, including antibacterial UV systems, ERV/HRV systems, electronic air cleaners, and humidifiers.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: All parts are interchangeable.
Additional features: All models feature a smooth-line, low-profile cabinet design that blends attractive styling with features that significantly decrease the amount of time needed to install or service. The durable, wrap-around, all-steel, fully louvered cabinet provides maximum coil protection from yard hazards and weather extremes.
Warranty information: Five-year limited all parts. Extended warranties available through Protection Plus
Special installation requirements: Straight installation. No special requirements.
Contact: Ruud, Fort Smith, Ark.; attn: Customer Service Representatives, 479-646-4311; 479-648-4918 (fax); info@ruudac.com; www.ruudac.com.
eProduct 211
Samsung
Model:AQB12JJWC ductless heat pumpFootprint (inches): Manufacturer did not specify.
Serviceability features: Indoor and outdoor units both have easy access to major components; self-diagnostic error codes on indoor and outdoor units allow easy pinpointing of any faults on the unit.
Technical support: On the East Coast call 717-243-2535 from 8 a.m. to 5 p.m.; on the West Coast call 562-699-6066 from 8 a.m. to 5:30 p.m.
Technical support materials: Installation, operation and service/troubleshooting manuals, Samsung 106 basic technical.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Silver Nano air treatment provides a coating to the filters and the unit that kills bacteria and mold on contact.
Thermostat compatibility: Wireless remote control is provided.
Replacement parts compatibility: Shares parts with other units in the model line.
Additional features: Inverter drive compressor allows the unit performance to be matched to the building load. Factory-installed low ambient control allows the unit to operate in cooling down to 23°F.
Warranty information: One year parts, five-year compressor.
Special installation requirements: Both refrigerant lines need to be insulated. Electronic expansion valve is located in the outdoor unit.
Contact: Samsung, Santa Fe Springs, Calif.; attn: John Miles, 562-699-6066; 562-699-4351 (fax); johnm@quietside.com; www.quietside.com.
eProduct 212
Sanyo Fisher
Model:Flexi-Multi 28KMH72 ductless heat pumpFootprint (inches): 35 by 35 by 13
Serviceability features: Up to four zones (rooms), independently controlled, apitite filter.
Technical support: Available at 800-851-1235.
Technical support materials: All available.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Apitite filter and ion generator.
Thermostat compatibility: Wireless remote control included.
Replacement parts compatibility: Shares parts.
Additional features: Ductless split system room air conditioner.
Warranty information: Five-year compressor, one-year parts.
Special installation requirements: None.
Contact: Sanyo Fisher, Chatsworth, Calif.; attn: Thomas Crock, 818-998-7322; 818-701-4170 (fax); tcrock@sfc.sanyo.com; www.sanyohvac.com.
eProduct 213
Tappan
Model:FS4BI split systemFootprint (inches): 31 by 31
Serviceability features: Easy compressor and control access. Easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.
Technical support: The technical service group is available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Tappan dealers can access the technical literature library by logging into the online dealer extranet (www.tappan.net).
Noise-reduction features: Sound-absorbing base, swept-wing fan blade, and compressor sound blanket all contribute to reduce unwanted noise.
IAQ equipment supported: EAC's, humidifiers, compatible with Tappan zoning.
Thermostat compatibility: A special thermostat/controller is an integral part of the system.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: The iQ Driveâ„¢ system features fully variable-speed compressor technology and variable-speed indoor and outdoor motors; the system provides variable cooling capacity as needed to meet comfort requirements; and iQ Drive provides unprecedented efficiencies to the homeowner - the highest SEER ratings in the industry, the company says.
Warranty information: Standard eight-year all parts, 10-year compressor. Five-year quality pledge to replace the unit if the compressor fails in the first five years when installed with a matched indoor coil or air handler.
Special installation requirements: An electronic expansion valve is part of the indoor evaporator. Training and certification are required to work on the iQ Drive inverter system.
Contact: Tappan, O'Fallon, Mo.; attn: Marc DeLaurent, 636-561-7300; 636-561-7399 (fax); delaurentm@nordyne.com; www.tappan.net.
eProduct 214
Model: F(T,S)4BF split systems and heat pumps
Footprint (inches): 31 by 31
Serviceability features: ComfortAlert module detects system and electrical problem conditions. Easy compressor and control access. Five-minute anti-short-cycle protection; easy-access, full-service refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.
Technical support: The technical service group is available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Tappan dealers can access the technical literature library by logging onto the online dealer extranet (www.tappan.net).
Noise-reduction features: One-piece top orifice and heavy-duty PSC motor provide quiet operation as well as the new swept-wing fan blade and sound blanket. New sound absorbing base pans.
IAQ equipment supported: Variable-speed air handlers are available with special dehumidification function. Also, a line of Tappan whole-home IAQ products including HEPA air cleaners, electronic air cleaners, electronic air filters, UV lights, and humidifiers.
Thermostat compatibility: Two-stage thermostat recommended.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: Includes high- and low-pressure switches; discharge thermostat; liquid line drier; durable, attractive louvered cabinet to protect unit from debris.
Warranty information: Eight-year all parts. Five-year quality pledge to replace the unit if the compressor fails in the first five years when installed with a matched Tappan indoor air handler or coil.
Special installation requirements: None.
Contact: Tappan, O'Fallon, Mo.; attn: Marc DeLaurent, 636-561-7477; 636-561-7365 (fax); delaurentm@nordyne.com; www.tappan.net.
eProduct 215
Tempstar
Model:SmartComfort TX 5300 split systemFootprint (inches): 31 to 35 (w) by 32 to 37 (d)
Serviceability features: Easy-access panel to compressor, internal components. Three-piece grille panels are easy to remove separately to view and clean. ComfortAlert troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for troubleshooting access to components (plug and play); control accessories prepunched for attachment. Free-and-clear refrigerant tube stubs.
Technical support: A technical service advisor is on staff at local distributors for technical assistance, troubleshooting. Technical training available at ICP mobile training centers nationwide and field schools held at participating distributor locations.
Technical support materials: Product information posted online (www.tempstardlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors, compressor sound jackets, and two-speed fan motors to produce minimal sound at maximum performance.
IAQ equipment supported: A full line of IAQ products includes filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Standardized parts throughout the line.
Additional features: Tight wire coil guard with 3/8 -inch spacing provides protection with optimal airflow and ease of service. New air management system (AMS) helps improve performance without increasing sound. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions. Corner posts with grille panels add strength to the unit, reduce noise and vibration.
Warranty information: 10-year limited compressor, five-year limited parts. R-410A model qualifies for the Tempstar five-year No-Hassle Replacement warranty. R-22 model qualifies for a one-year No-Hassle Replacement warranty. (If the compressor fails within the specified number of covered years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Tempstar products. The optional Homeowner's Extended Labor Plan (HELP) offers five- and 10-year plans.
Special installation requirements: TXV devices recommended for maximum system reliability.
Contact: Tempstar, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.tempstar.com.
eProduct 216
Model: SmartComfort TX 5400 split system
Footprint (inches): 31 to 35 (w) by 32 to 37 (d)
Serviceability features: ComfortAlert troubleshooting LED fault indicators diagnose system-related malfunctions. Innovative control box with easy-to-remove panel for troubleshooting access to components (plug and play); control accessories prepunched for attachment. Easy-access panel to compressor, internal components. Three-piece grille panels.
Technical support: A technical service advisor on staff at local distributors is available with technical assistance, troubleshooting. Technical training available at ICP mobile training centers at locations nationwide and at field schools held at participating distributor locations.
Technical support materials: Product information posted online (www.tempstardlr.com) includes product spec sheets, installation and operation manuals, and technical support/parts manuals.
Noise-reduction features: Units are equipped with Copeland scroll compressors, compressor sound jackets, and two-speed fan motors to produce minimal sound at maximum performance.
IAQ equipment supported: IAQ products include filters, humidifiers, UV lights, and EACs.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Standardized parts throughout the line.
Additional features: New air management system (AMS) helps improve performance without increasing sound. ComfortAlert troubleshooting LED fault indicators diagnose system-related malfunctions. Corner posts with grille panels add strength to the unit, reduce noise and vibration. Tight wire coil guard with 3/8 -inch spacing provides protection with optimal airflow and ease of service.
Warranty information: 10-year limited compressor, seven-year limited outdoor coil, five-year limited parts. This product qualifies for the Tempstar seven-year No-Hassle Replacement warranty. (If the compressor or covered coil fails within seven years from the installation date, ICP will provide a replacement outdoor unit at no charge. Some restrictions apply; see warranty certificate for details.) An extended service agreement is available on Tempstar products. The optional Homeowner's Extended Labor Plan (HELP) offers five- and 10-year plans.
Special installation requirements: TXV devices recommended for maximum system reliability.
Contact: Tempstar, Nashville, Tenn.; attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.tempstar.com.
eProduct 217
Texas Furnace
Model:Meridian and TFC split systemFootprint (inches): 31 by 36
Serviceability features: Microchannel coil is easily cleaned. Remove one screw to access electrical controls.
Technical support: Available 7:30 a.m. to 5 p.m. Central time, Monday through Friday.
Technical support materials: Manufacturer did not specify.
Noise-reduction features: Manufacturer did not specify.
IAQ equipment supported: Manufacturer did not specify.
Thermostat compatibility: Manufacturer did not specify.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: All-aluminum microchannel coil is very efficient. The 5-ton, 13 SEER unit is 28 inches tall. Powder paint finish on a full-protection, louvered steel wrapper. Factory installed liquid line filter-drier is standard.
Warranty information: Standard five-year parts, five-year compressor limited.
Special installation requirements: Manufacturer did not specify.
Contact: Texas Furnace, Houston; attn: Francis Franck, 713-466-1504; 713-466-3648 (fax); listen@texasfurnace.com; www.texasfurnace.com.
eProduct 218
Trane
Model:XL19i split system and heat pumpFootprint (inches): 41 (h) by 37 (w) by 34 (d)
Serviceability features: Quick-Sessâ„¢ service access panels for quicker installation, service, and maintenance, including easy coil cleaning access.
Technical support: Contact local Trane distributor.
Technical support materials: Supporting installation and service information, including part numbers, are available to Trane distributors and dealers.
Noise-reduction features: Compressor sound insulators available on certain models.
IAQ equipment supported: Trane's proprietary CleanEffectsâ„¢ removes up to 99.98 percent of airborne allergens.
Thermostat compatibility: Compatible with certain thermostats, but Trane markets its own branded thermostats.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: Exclusive, all-aluminum Spine Finâ„¢ coil provides low airflow resistance, greater heat exchange, and more resistance to formicary corrosion and leaks. The premium styling blends well with today's most popular exterior architectural details, the company says. Baked-on powder paint covers all louvered panels uniformly, increases protection from rust and corrosion.
Warranty information: Ten-year limited compressor, coil, and all functional parts.
Special installation requirements: Manufacturer did not specify.
Contact: Trane, Tyler, Texas; www.trane.com.
eProduct 219
WaterFurnace
Model:E Series geothermal heat pumpFootprint (inches): 26 by 22 or 31 by 25
Serviceability features: On-board diagnostics and troubleshooting with microprocessor and LEDs. Easily accessible refrigeration components, designed for front access.
Technical support: Available 24 hours a day at 800-455-3624.
Technical support materials: Complete selection of technical support materials available online.
Noise-reduction features: Fully insulated cabinet, compressor blankets, discharge mufflers. Sound-attenuating mounting plate under dual-capacity compressors. Slow-starting, variable-speed motor.
IAQ equipment supported: Can be used with variety of IAQ products, including electronic air cleaners, electrostatic air filters, HEPA filters, HRVs, humidifiers, etc.
Thermostat compatibility: Requires three-stage heat, two-stage cool thermostat.
Replacement parts compatibility: Shares some common replacement parts with other lines.
Additional features: Exceptional performance, reliability, and ease of installation and service are hallmarks of the product line, the company says.
Warranty information: Various warranties are available, up through 10 years all parts with labor allowance.
Special installation requirements: None.
Contact: WaterFurnace, Fort Wayne, Ind.; attn: Phil Albertson, 800-222-5667; 260-747-5780 (fax); phil.albertson@waterfurnace.com; www.waterfurnace.com.
eProduct 220
Westinghouse
Model:B5 Series air handlersFootprint (inches): Three standard widths (14, 20, and 23)
Serviceability features: Easy access to heater compartment.
Technical support: The technical service group is available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Westinghouse dealers can access the technical literature library by logging onto the dealer extranet (www.westinghousehvac.com).
Noise-reduction features: Fully insulated cabinet features 1-inch Tuf-Skin® insulation with an R value of 4.2.
IAQ equipment supported: Electronic air cleaners and humidifiers. Variable-speed versions are available.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models in the line.
Additional features: The B5 Series was redesigned for 2006. Several changes were made to the blower deck to greatly reduce air leakage. The upgraded, 1-inch cabinet insulation contributes to quiet operation and prevents cabinet sweating in difficult applications. Electric heater kits are available from 5 to 30 kW.
Warranty information: Standard eight-year all parts.
Special installation requirements: Manufacturer did not specify.
Contact: Westinghouse, O'Fallon, Mo.; attn: Marc DeLaurent, 636-561-7300; 636-561-7399 (fax); delaurentm@nordyne.com; www.westinghouse.com.
eProduct 221
Model: FS4BI split system
Footprint (inches): 31 by 31
Serviceability features: Easy compressor and control access. Easy access, full service to refrigerant valves; removable top-grille assembly for quick service without disconnecting fan motor leads.
Technical support: The technical service group is available at 800-422-4328 (800-4AC-HEAT) from 8 a.m. to 4:30 p.m. Central time.
Technical support materials: Westinghouse dealers can access the technical literature library by logging onto the dealer extranet (www.westinghousehvac.com).
Noise-reduction features: Sound-absorbing base, swept-wing fan blade, and compressor sound blanket all contribute to reduce unwanted noise.
IAQ equipment supported: Electronic air cleaners, humidifiers, compatible with Westinghouse zoning.
Thermostat compatibility: A special thermostat/controller is an integral part of the system.
Replacement parts compatibility: Manufacturer did not specify.
Additional features: The iQ Drive system features fully variable-speed compressor technology and variable-speed indoor and outdoor motors; the system provides variable cooling capacity as needed to meet comfort requirements; and iQ Drive provides unprecedented efficiencies to the homeowner - the highest SEER ratings in the industry, the company says.
Warranty information: Standard eight-year all parts, 10-year compressor. Five-year quality pledge to replace the unit if the compressor fails in the first five years when installed with a matched indoor coil or air handler.
Special installation requirements: An electronic expansion valve is part of the indoor evaporator. Training and certification are required to work on the iQ Drive inverter system.
Contact: Westinghouse, O'Fallon, Mo.; attn: Marc DeLaurent, 636-561-7300; 636-561-7399 (fax); delaurentm@nordyne.com; www.westinghouse.com.
eProduct 222
Whirlpool
Model:Gold WGH300 and WAHMS heat pumpFootprint (inches): 25 by 27 to 29 by 31
Serviceability features: Allows easier service with external gauge ports and pressure ports for the heating cycle. The electrical cabinet is located on the corner of the unit for easy access. Each of the louvered panels remove with two screws for cleaning. The air handler has front accessibility to the accessory heater and the evaporator coil for ease of service.
Technical support: Available at 866-944-7575 from 8 a.m. to 5 p.m. Eastern time, Monday through Friday.
Technical support materials: Product specs, installation and operating manuals, owners' manuals, Web access to part numbers, service bulletins, and warranty information.
Noise-reduction features: Compressor sound blanket.
IAQ equipment supported: Supports many of the IAQ products in the industry.
Thermostat compatibility: Compatible with most industry standard thermostats. A Whirlpool thermostat is available in programmable models.
Replacement parts compatibility: Uses industry-standard parts.
Additional features: A quality-engineered product manufactured to the strict standards of quality and safety of Whirlpool Corp., the company says; all products are run tested at the factory to provide the homeowner with the assurance of consistent quality and performance they expect from the brand.
Warranty information: Limited five-year parts and 10-year compressor. Extended parts-and-labor warranties available. The WAHMS air handler is covered by five-year parts.
Special installation requirements: All Whirlpool products should be installed in accordance with the Whirlpool installation instructions and applicable local codes.
Contact: Whirlpool; attn: Chris Campbell, chris_p_campbell@whirlpool.com; www.whirlpoolhvac.com.
eProduct 223
York - UPG York
Model:Affinity Series packaged unitFootprint (inches): 49 (d) by 47 (w) by 33 (h)
Serviceability features: A large, single panel covers the electrical and gas controls, making servicing easier. The blower compartment has an additional large panel with a built-in handle tab. Removing this panel will allow the blower assembly to slide-out for maintenance and troubleshooting.
Technical support: First level of support provided by distributor; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern time.
Technical support materials: A technical guide, installation manual, submittal data sheet, and user manual are available on York's Website (www.yorkupg.com).
Noise-reduction features: The compressor has internal isolation and sound muffling to minimize vibration and noise. The compressor is externally isolated on a dedicated, independent mounting. This unit also uses a swept-wing fan design and high-efficiency scroll compressor technology to provide quiet, energy-efficient operation that delivers precise temperature and humidity control.
IAQ equipment supported: Compatible with a complete line of York IAQ products, including ventilation systems, UV air treatment systems, electronic and media air cleaners, and whole-house humidifiers.
Thermostat compatibility: Units are designed to operate with 24-V electronic and electromechanical thermostats. All units can operate with single-stage, heat/single-stage cool thermostats - with or without the economizer.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The unit's design comes standard in champagne, or color panels are available in Bermuda, stone, jet black, gun metal blue, chocolate, or terra cotta. The Affinity unit also uses environmentally friendly R-410A and is Energy Star® qualified.
Warranty information: Five-year parts, 10-year compressor.
Special installation requirements: None.
Contact: York - UPG York, Norman, Okla.; attn: Mickey Smith, 405-419-6541; 405-419-6545 (fax); mickey.smith@york.com; www.yorkupg.com.
eProduct 224
Model: [mc]2 MicroChannel MiniCube split system
Footprint (inches): 22 by 22
Serviceability features: Features fully exposed refrigerant connections and a single panel covering the electrical controls for easier servicing. Secured reusable service valves on both the liquid and vapor sweat connections make evacuating and charging easier.
Technical support: First level of support provided by distributor; factory support available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern time.
Technical support materials: A full technical guide with wiring diagrams, sizes, parts, accessories, part numbers, and installation instructions is available upon request.
Noise-reduction features: Top discharge blows warm air up and away from the structure and surrounding landscape and minimizes operating sounds. A rigid top panel, cushioned compressor mounts and rippled condenser coil fins further reduce the unit's operating sound level.
IAQ equipment supported: Compatible with a complete line of York residential IAQ products.
Thermostat compatibility: Compatible with most thermostats.
Replacement parts compatibility: Shares replacement parts with other models.
Additional features: The 13 SEER product uses an aluminum microchannel coil technology to provide higher efficiency and greater capacity, without a corresponding increase in coil surface area. This technology reduces the size of the unit compared to traditional 13 SEER products, and uses less refrigerant, according to the company.
Warranty information: Five-year limited parts, five-year compressor.
Special installation requirements: The unit is so small and lightweight that it can be installed by one service technician. The indoor coil requires a thermostatic expansion valve to ensure proper refrigerant flow.
Contact: York - UPG York, Norman, Okla.; attn: Mickey Smith, 405-419-6541; 405-419-6545 (fax); mickey.smith@york.com; www.yorkupg.com.
eProduct 225
Publication date: 04/17/2006
Report Abusive Comment