AirEase

Footprint (in inches): 18 by 28 by 40; 25 by 28 by 40; 21 by 28 by 40

Serviceability features: Diagnostics and easy access to burners and controls.

Technical support: Available 8 a.m. to 5 p.m., Monday through Friday at 419-484-2610.

Noise-reduction features: Boxed-in burner compartment designed for quieter operation.

Indoor air quality features: Electronic air cleaner and humidifier terminals at the board.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Replacement parts compatible.

Additional features: Ability to bring fresh air to the burners; direct-vent capable.

Warranty information: 20 years limited on heat exchanger.

Special installation requirements: None.

Contact: AirEase, Bellevue, Ohio; Attn: Amal Humsi, 419-483-4840; 419-483-6531 (fax); www.airease.com.

eProduct #220

Amana

Footprint (in inches): 42 by 16

Serviceability features: Pullout filter. New bent coil is designed to be accessible for easy cleaning.

Technical support: Available at 800-782-2585.

Noise-reduction features: New nine-blade forward-curved fan for quiet operation.

Indoor air quality features: Increased dehumidification capacity, optional activated charcoal filter.

Thermostat compatibility: No thermostat necessary, but optional.

Replacement parts compatibility: Many replacement parts are shared with other models.

Additional features: Unique bent coil is designed to maximize airflow and primary and secondary surface.

Warranty information: Five-year sealed system warranty, one-year parts and labor warranty; second through fifth year, parts only.

Special installation requirements: Simple to install and operate, the company states.

Contact: Goodman Manufacturing, Houston; Attn: Jim Miller, 713-861-2500, ext. 570; 713-861-0772 (fax); jim.miller@goodmanmfg.com; www.amana-hac.com.

eProduct #221

Model: RTG Ultron 16 heat pump

Footprint (in inches): 35 by 35

Serviceability features: Single-panel access to controls, back seating service valves.

Technical support: Available at 800-782-2585 from 7 a.m. to 7 p.m. Central Time.

Noise-reduction features: High-density foam compressor sound blanket, low 850-rpm condenser fan motor, wire condenser fan discharge grille.

Indoor air quality features: Two-stage compressor.

Thermostat compatibility: Can be used with standard thermostats in conjunction with kits.

Replacement parts compatibility: Shares multiple components with other Amana products.

Additional features: Environmentally friendly R-410A.

Warranty information: Lifetime limited replacement warranty to the original owner. Ten years on parts. Extended protection plans are available.

Special installation requirements: None.

Contact: Goodman Manufacturing, Houston; Attn: Al Knight, 713-861-2500, ext. 660; 713-861-0772 (fax); alknight2@goodmanmfg.com; www.amana-hac.com.

eProduct #222

American Standard

Footprint (in inches): 40 (h) by 17-1/2 to 24-1/2 (w) by 28-1/2 (d)

Serviceability features: Integrated furnace control monitors system status and has self-diagnostic capability with built-in LED fault code display. CFM LED on furnace control provides visual confirmation of selected heating and cooling airflows. Exclusive hinged blower door with dual quarter-turn latches.

Technical support: Contact local American Standard distributor.

Noise-reduction features: Variable-speed blower motor features a soft start. Other features include louverless furnace doors, sealed combustion chamber, reduced firing rate, fully insulated furnace cabinet, and automotive-grade gaskets on blower compartment doors.

Indoor air quality features: Exclusive Comfort-R™ mode allows evaporator to rapidly cool down by staging the airflow during the cooling cycle, resulting in increased moisture removal, the company states.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Factory-supplied, spring-loaded filter rack can be used in both bottom or side-return air applications and accepts standard-sized filter. Vent lengths of up to 200 feet are possible with American Standard variable-speed draft inducer.

Warranty information: Lifetime limited on heat exchanger, five years limited on all other functional parts. Optional extended warranties are available for 10-year parts and labor coverage.

Special installation requirements: Manufacturer did not specify.

Contact: American Standard, Tyler, Texas; Attn: Paul Trotter, 903-581-3300; 903-581-9070 (fax); paul.trotter@americanstandard.com; www.americanstandardair.com.

eProduct #223

Model: Heritage 18 heat pump

Footprint (in inches): 37 by 34

Serviceability features: “Easy-Sess” panels and cabinet, long and elevated refrigerant stub tube.

Technical support: Contact local American Standard distributor.

Noise-reduction features: Compressor sound insulators and core-filled mounting plate.

Indoor air quality features: Matching with Comfort R mode air handlers lowers indoor noise, provides warmer air temperature, and increases filter efficiency.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Unit has 18.90-SEER efficiency and two independent stages (compressors) for capacity modulation. Two-row Spine Fin™ coil design, corrosion-resistant finish with SermaGuard™ rust-resistant fasteners and Durabase™ basepan. Energy Star qualified.

Warranty information: Ten years limited on compressor, 10 years limited coil, five years on all functional parts. Extended parts and labor warranties are available up to 10 years.

Special installation requirements: Manufacturer did not specify.

Contact: American Standard, Tyler, Texas; Attn: Paul Trotter, 903-581-3300; 903-581-9070 (fax); paul.trotter@americanstandard.com; www.americanstandardair.com.

eProduct #224

Arcoaire

Footprint (in inches): 15-1/2 to 22-3/4 (w) by 29 (d)

Serviceability features: Furnace includes built-in diagnostic system that can be used even while the furnace is running. Easy on/off double-wall door (patent pending) has built-in sound shield. A height of 40 inches provides easy installation in small spaces.

Technical support: Technical service advisor on staff at local distributor is available. Technical training is available at ICP National Training Center (Lewisburg, Tenn.), at field schools held in participating distributor locations nationwide, and in ICP’s new mobile training center.

Noise-reduction features: Double-wall door. For horizontal applications, a rotatable inducer motor is designed for quiet operation.

Indoor air quality features: Connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the product line.

Additional features: Equipped with an RPJ® III heat exchanger. These are multiposition furnaces that can be installed in upflow, downflow, horizontal left, or horizontal right configurations. An optional chimney vent kit (available on most models) eliminates the need for the expensive chimney liner required by building codes.

Warranty information: Five years limited on parts, 20 years limited on heat exchangers. A HELP® extended service agreement is available, offering a five-year and 10-year extended service agreement on parts and labor.

Special installation requirements: Low NOx models are available. A downflow vent guard kit is required for use on multiposition models when installed as downflows.

Contact: Arcoaire, Nashville, Tenn.; Attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.arcoaire.com.

eProduct #225

Model: PS90-DV gas furnace

Footprint (in inches): 15-1/2 to 22-3/4 (w) by 29 (d)

Serviceability features: Spacious service compartment, two easy on/off doors, built-in diagnostic system can be used even while the furnace is running. Features a new internal condensate drain system that can be routed out the right or left of the furnace.

Technical support: Technical service advisor on staff at local distributor. Technical training available at ICP National Training Center (Lewisburg, Tenn.), at field schools held in participating distributor locations nationwide, and in ICP’s new mobile training center.

Noise-reduction features: One-piece steel cabinet is thermal lined; insulated blower compartment.

Indoor air quality features: Connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the product line.

Additional features: These multiposition furnaces come equipped with an aluminized steel RPJ® III heat exchanger. It is certified for two-pipe direct vent installation. Furnace is equipped with Honeywell SmartValve II ignition. A high-airflow 100,000-Btuh model is available for 5-ton cooling applications.

Warranty information: Five years limited on parts, 20 years limited on heat exchangers. A HELP® extended service agreement is available, offering a five-year and 10-year extended service agreement on parts and labor.

Special installation requirements: Most hose and clamp connections are now pre-made by the factory. Shipped as natural gas in upflow configuration, with all parts included for downflow, horizontal-left, and horizontal-right, with no need for accessory conversion kits. LP gas kits available.

Contact: Arcoaire, Nashville, Tenn.; Attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.arcoaire.com.

eProduct #226

Armstrong Air

Footprint (in inches): 18 by 28 by 44; 21 by 28 by 44; 25 by 28 by 44

Serviceability features: Diagnostics and easy access to burners and controls.

Technical support: Available at 419-484-2610.

Noise-reduction features: Insulated cabinet and blower compartment to reduce sound level.

Indoor air quality features: Electronic air cleaner and humidifier terminals on the board.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Replacement parts are compatible.

Additional features: Manufacturer did not specify.

Warranty information: Limited lifetime, non-prorated warranty on heat exchanger. Extended warranties available.

Special installation requirements: None.

Contact: Armstrong Air, Bellevue, Ohio; Attn: Amal Humsi, 419-483-4840; 419-483-6531 (fax); www.armstrongair.com.

eProduct #227

Bard Manufacturing Co.

Footprint (in inches): 23 (w) by 30-1/2 (d) by 53 to 59 (h)

Serviceability features: Slide-out combustion chamber/burner assembly, plug-in connectors for blower and burner wiring connections. Units feature four heat exchanger cleanout ports. Selected models have reduced firing rate of 0.55 GPH. All models designed to provide fresh air for combustion with optional fresh air kit.

Technical support: Available through local Bard distribution network.

Noise-reduction features: Pyrolite combustion chamber. Sound absorbing high-temperature fiber provides faster heat buildup in heat exchanger. Cabinet insulated to reduce sound levels.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: All models compatible with most thermostats.

Replacement parts compatibility: Product line shares standard Bard replacement parts. Many standard off-the-shelf components.

Additional features: Combustion chamber/burner mounting system allows for easy removal for service and ensures burner alignment.

Warranty information: Five years on parts, limited lifetime on heat exchanger.

Special installation requirements: Manufacturer did not specify.

Contact: Bard, Bryan, Ohio; Attn: Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct #228

Model: Specialist GSV ground-source heat pump

Footprint (in inches): 27 (w) by 26 (d) by 48 (h)

Serviceability features: Scroll compressor, variable-speed ECM motor. High- and low-pressure switches ensure maximum protection for both ground water and earth loop applications. A moveable control panel allows for left- or right-hand installations. Left- or right-hand option in same cabinet.

Technical support: Available through local Bard distribution network.

Noise-reduction features: Scroll compressor, ECM blower motor, insulated cabinet.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: All models compatible with most thermostats.

Replacement parts compatibility: Product line shares standard Bard replacement parts.

Additional features: Built-in domestic hot water heat exchanger gives the customer the opportunity to supplement hot water needs and reduce energy costs by adding the optional water pump module. Slide-in electric heat strips add to the flexible installation alternatives.

Warranty information: Five-year parts/compressor warranty. Optional 10-year warranty on compressor.

Special installation requirements: Manufacturer did not specify.

Contact: Bard, Bryan, Ohio; Attn: Pam Bard Steel, 419-636-1194; 419-636-2640 (fax); bard@bardhvac.com; www.bardhvac.com.

eProduct #229

Bryant

Footprint (in inches): 33-1/3 (h) by 28-1/2 (d) by 14 to 24-1/2 (w)

Serviceability features: Control board status codes can be recovered, even after a power outage. Has auto run test feature. Technical support: Contact local distributor for service-related questions.

Noise-reduction features: In-shot burners enclosed in a burner box.

Indoor air quality features: Control board has connections for electronic air cleaner. A member of Bryant’s “Perfect Humidity” family of products, featuring “Cool to Dehumidify” mode, when used with the Thermidistat™ control. This system can deliver 128 percent more humidity removal than a standard system. Factory-supplied media cabinet accommodates from 1-inch filter to 4-5/16-inch MERV-10 rated filter.

Thermostat compatibility: Compatible with most brand thermostats (power-stealing brands not recommended).

Replacement parts compatibility: Shares many of the components of the new single-stage (Model 310, and New Plus 80 Model 311) and the two-stage (the New Plus 80t, Model 312) furnaces.

Additional features: Product was created by partnering with Bryant dealers over a four-year period, and the design has since been updated in response to additional ideas from Bryant dealers, particularly regarding ease of installation and quiet operation, the company states.

Warranty information: Twenty years limited on heat exchangers, five years limited on rest of furnace components. Optional warranties of up to 10 years (parts and labor) are available.

Special installation requirements: Four-way multipoise design with a vent elbow can be simply rotated to allow for 13 different vent configurations.

Contact: Bryant, Indianapolis; 800-428-4326; 317-240-5666 (fax); contact.bryant@bryant.com; www.bryant.com.

eProduct #230

Model: The Plus 90i variable-speed gas furnace

Footprint (in inches): 39-7/8 (h) by 28-1/2 (d) by 17-1/2 to 24-1/2 (w)

Serviceability features: View port in blower door to view LED diagnostic codes. ECM motor simulator and APM monitoring kit are optional.

Technical support: Contact local distributor for service-related questions.

Noise-reduction features: Fully insulated cabinet. With Perfect Heat™ two-stage heating, the furnace runs in low-heat operation much of the time. Sealed combustion system helps reduce sound levels.

Indoor air quality features: Control board has connections for electronic air cleaner. “Perfect Humidity” feature helps control humidity during heating (humidification) and cooling (dehumidification) operation. Factory-supplied media cabinet accommodates from 1-inch filter to 4-5/16-inch MERV-10 rated filter.

Thermostat compatibility: Compatible with most brand thermostats (power-stealing brands not recommended).

Replacement parts compatibility: Shares many of the components of the single-stage (350MAV) and two-speed (352MAV) furnaces. Unique components include GE-ECM variable-speed inducer and blower motor, as well as patented control board.

Additional features: Multipoise design allows dealer to stock one furnace for all applications (upflow, downflow, and horizontal). Patented heating and cooling (two-speed) algorithm. Perfect Heat™ technology is designed to determine low- and high-heat run times based on previous heating cycles. Fan On Plus™ allows consumer to adjust continuous fan airflow amount (cfm output) from the thermostat. Patented poly-propylene laminated secondary heat exchanger.

Warranty information: Limited lifetime on heat exchanger, five years limited on rest of furnace components. Optional warranties of up to 10 years (parts and labor).

Special installation requirements: Capable of vent lengths up to 70 feet with six elbows.

Contact: Bryant, Indianapolis; 800-428-4326; 317-240-5666 (fax); contact.bryant@bryant.com; www.bryant.com.

eProduct #231

Carrier Corp.

Footprint (in inches): 33-1/3 (h) by 28-1/2 (d) by 14 to 24-1/2 (w)

Serviceability features: Easy filter access with use of the factory-supplied media cabinet. Control board status codes are retained even following a power outage. View port in blower door to view LED diagnostic codes. ECM motor simulator and APM monitoring kit are optional.

Technical support: Contact local distributor for service-related questions.

Noise-reduction features: Features the “QuieTech” noise reduction system. Fully insulated cabinet. With two-stage heating, furnace runs in low-heat operation much of the time, which keeps sounds levels at a minimum.

Indoor air quality features: Control board has connections for electronic air cleaner. Ideal Humidity™ feature helps control humidity during heating (humidification) and cooling (dehumidification) operation. Factory-supplied media cabinet accommodates from 1-inch filter to 4-5/16-inch, MERV-10 rated filter.

Thermostat compatibility: Compatible with most brand thermostats (power-stealing brands not recommended).

Replacement parts compatibility: Shares many of the components of the single-stage (58DLA/DLX) and two-speed (58CTA/CTX) furnaces. Unique components include GE-ECM variable-speed blower motor, patented control board.

Additional features: This four-way multipoise furnace is only 33-1/3-inches high, allowing dealers more room to maneuver, and more room for indoor air quality-enhancing products, such as Carrier’s exclusive “EZ-Flex” media filter, which provides a MERV rating of 10.0. Patented heating and cooling (two-speed) algorithm. ComfortHeat™ technology is designed to determine low- and high-heat run times based on previous heating cycles. ComfortFan™ allows consumers to adjust continuous fan airflow amount (cfm output) from the thermostat.

Warranty information: Twenty years limited on heat exchangers, five years limited on rest of furnace components. Optional warranties of up to 10 years (parts and labor) are available.

Special installation requirements: Multipoise design allows dealer to purchase one furnace for all applications (upflow, downflow, and horizontal); 13 different vent configurations are available.

Contact: Carrier Corp., Indianapolis; 800-227-7437; contact.carrier@carrier.utc.com; www.carrier.com.

eProduct #232

Model: WeatherMaker Infinity variable-speed gas furnace

Footprint (in inches): 39-7/8 (h) by 28-1/2 (d) by 17-1/2 to 24-1/2 (w)

Serviceability features: View port in blower door to view LED diagnostic codes. ECM motor simulator and APM monitoring kit are optional.

Technical support: Contact local distributor for service-related questions.

Noise-reduction features: Fully insulated cabinet, sealed combustion system. With two-stage heating, furnace runs in low-heat operation much of the time.

Indoor air quality features: Control board has connections for electronic air cleaner. Ideal Humidity™ feature. Factory-supplied media cabinet accommodates 1-inch filter to 4-5/16-inch, MERV-10 rated filter.

Thermostat compatibility: Compatible with most brand thermostats (power-stealing brands not recommended).

Replacement parts compatibility: Shares many of the components of the single-stage (58MXA) and two-speed (58MTA) furnaces. Unique components include GE-ECM variable-speed inducer and blower motor, patented control board.

Additional features: Multipoise design allows dealer to stock one furnace for all applications (upflow, downflow and horizontal). Patented heating and cooling (two-speed) algorithm. ComfortHeat™ technology determines low- and high-heat run times based on previous heating cycles. ComfortFan™ allows consumer to adjust continuous fan airflow amount (cfm output) from their thermostat.

Warranty information: Limited lifetime on heat exchanger, five years limited on rest of furnace components. Optional warranties of up to 10 years (parts and labor) are available.

Special installation requirements: Capable of vent lengths of up to 70 feet with six elbows.

Contact: Carrier Corp., Indianapolis; 800-227-7437; contact.carrier@carrier.utc.com; www.carrier.com.

eProduct #233

Century

Footprint (in inches): 14 by 29 to 25 by 29

Serviceability features: Easily accessed components.

Technical support: 517-787-2100.

Noise-reduction features: Manufacturer did not specify.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares with other models in the gas furnace line.

Additional features: Compact size, low profile. In-shot burners designed for the most efficient air-gas mixture.

Warranty information: Twenty years on heat exchanger, five years on other components.

Special installation requirements: Manufacturer didn’t specify.

Contact: Century, Jackson, Mich.; Attn: Brian King, 517-787-2100; 517-787-9341 (fax); www.heatcontroller.com.

eProduct #234

Model: VGY closed loop water-source heat pump

Footprint (in inches): 21 by 21 to 32 by 36

Serviceability features: Removable panels, corner post water connection, slide-out blower.

Technical support: Available at 517-787-2100.

Noise-reduction features: Balanced centrifugal blower. Special noise reduction package is available.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Common components.

Additional features: Maxi-Dri humidity control. Loop pump relay. Built-in desuperheater with controls uses excess heat for domestic hot water.

Warranty information: Five years on compressor, five years on all other parts.

Special installation requirements: Installer should be IGSHPA certified.

Contact: Century, Jackson, Mich.; Attn: Brian King, 517-787-2100; 517-787-9341 (fax); www.heatcontroller.com.

eProduct #235

ClimateMaster

Footprint (in inches): Vertical — 12 by 16 to 36 by 25; horizontal — 12 by 16 to 20 by 45

Serviceability features: System performance monitor; when equipped with a ClimateMaster thermostat, the system will tell you when it’s not at peak performance. Easy-access service panels and control box. All sizes have removable blower inlet rings for blower service/replacement. LED fault and status indication with memory aids diagnostics.

Technical support: Available at 800-299-9747, Monday through Friday, 8 a.m. to 5 p.m. Central Time.

Noise-reduction features: Insulated top or bottom supply air discharge for upflow or counterflow applications with vertical cabinets.

Indoor air quality features: Optional electrostatic filter for improved filtration.

Thermostat compatibility: Compatible with many common heat pump thermostats on the market.

Replacement parts compatibility: Shares parts with all units in its line.

Additional features: Standard E-coated aircoil.

Warranty information: Backed by standard 10-year limited warranty on major refrigerant circuit components and five-year limited warranty on all remaining covered components. Optional warranty gives 10/5 year labor allowance.

Special installation requirements: Manufacturer didn’t specify.

Contact: ClimateMaster, Oklahoma City; Attn: Laurence Scharff, 405-745-6000; 405-745-6058 (fax); lscharff@climatemaster.com; www.climatemaster.com.

eProduct #236

Model: Ultra Classic packaged geothermal heat pumps

Footprint (in inches): 25 by 25 by 51 to 28 by 28 by 63

Serviceability features: System performance monitor; when equipped with a ClimateMaster thermostat, the system will tell you when it’s not at peak performance. Easy-access service panels and control box. All sizes have removable blower inlet rings for blower service/replacement. Shrader ports are located for service convenience. LED fault and status indication with memory aids diagnostics.

Technical support: Available at 800-299-9747, Monday through Friday, 8 a.m. to 5 p.m. Central Time.

Noise-reduction features: Ultra Classic units are fully insulated for quiet operation.

Indoor air quality features: Standard electrostatic filter offers improved filtration.

Thermostat compatibility: Compatible with many common heat pump thermostats on the market.

Warranty information: Backed by standard 10-year limited warranty on major refrigerant circuit components and five-year limited warranty on all remaining covered components. An optional warranty gives 10/5 year labor allowance.

Special installation requirements: Manufacturer didn’t specify.

Contact: ClimateMaster, Oklahoma City; Attn: Laurence Scharff, 405-745-6000; 405-745-6058 (fax); lscharff@climatemaster.com; www.climatemaster.com.

eProduct #237

Coleman

Footprint (in inches): 40 (h) by 17-1/2 (w) by 28-1/2 (l)

Serviceability features: Control box has been relocated to the front of the furnace. Capacitor moved to blower housing. Relocated door switch allows for removal of blower without removal of separate switch and bracket.

Technical support: First level of support is provided by distribution; factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern Time.

Noise-reduction features: Top discharge carries noise up and away from landscaping.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Designed with contractors in mind, this low-profile unit is designed for the new construction and replacement market. It is Energy Star compliant.

Warranty information: Fifteen years on heat exchanger, five years limited on parts.

Special installation requirements: Manufacturer did not specify.

Contact: Coleman, Norman, Okla.; Attn: Mickey Smith, 405-419-6541; mickey.smith@york.com.

eProduct #238

Comfort-Aire

Footprint (in inches): 18 by 29 to 24 by 29

Serviceability features: Controls and components are easily accessed.

Technical support: Available at 517-787-2100.

Noise-reduction features: Manufacturer did not specify.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Common parts within the line.

Additional features: Compact size (34 inches tall), factory-installed trap. Energy Star listed. Available in upflow, downflow, and horizontal configurations.

Warranty information: Lifetime on heat exchangers, five years on other components.

Special installation requirements: Manufacturer did not specify.

Contact: Comfort-Aire, Jackson, Mich.; Attn: Brian King, 517-787-2100; 517-787-9341 (fax); www.heatcontroller.com.

eProduct #239

Model: Patriot 80 oil furnace

Footprint (in inches): 20 by 31 or 20 by 52

Serviceability features: Removable panels, easy cleanout.

Technical support: Available at 517-787-2100.

Noise-reduction features: Foil-faced, high-density fiberglass insulation, high-temperature ceramic combustion chamber. Special mounting for blower assembly.

Indoor air quality features: Control board ready for adding electronic air cleaner.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares many conventional components.

Additional features: Integrated fan control center, helical fan limit control, multiple firing rates, multi-position in the line (highboy, lowboy, and downflow/horizontal).

Warranty information: Limited lifetime on heat exchanger, five years on other components.

Special installation requirements: Manufacturer didn’t specify.

Contact: Comfort-Aire, Jackson, Mich.; Attn: Brian King, 517-787-2100; 517-787-9341 (fax); www.heatcontroller.com.

eProduct #240

ComfortMaker

Footprint (in inches): 15-1/2 to 22-3/4 (w) by 29 (d)

Serviceability features: Height of 35 inches provides easy installation in tight spaces; extra-spacious service compartment gives more room to work. This furnace features easy on/ off doors and built-in diagnostic system that can be used even while the furnace is running.

Technical support: Technical service advisor on staff at local distributor is available. Technical training available at ICP National Training Center (Lewisburg, Tenn.), at field schools held in participating distributor locations nationwide, and in ICP’s new mobile training center.

Noise-reduction features: Induced-draft blower.

Indoor air quality features: Connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the product line.

Additional features: Aluminized steel RPJ® III heat exchanger, Honeywell SmartValve II ignition system, single-stage fan operation. Narrow cabinet width offers easy side-vent installation. Furnaces can be installed in upflow, downflow, horizontal left, or horizontal right configurations.

Warranty information: Five years limited on parts, 20 years limited on heat exchangers. A HELP® extended service agreement is available, offering a five-year and 10-year extended service agreement on parts and labor.

Special installation requirements: Low NOx models are available. PS80 is certified for single-pipe vent installation. A downflow vent guard kit is required for use on multi-position models when installed as downflows.

Contact: ComfortMaker, Nashville, Tenn.; Attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.comfortmaker.com.

eProduct #241

Model: SoftSound IIS 90 gas furnace

Footprint (in inches): 19-1/8 to 24-1/2 (w) by 29 (d)

Serviceability features: Extra-spacious service compartments, two easy on/off doors. Includes a built-in electronic diagnostic system that can be used even while the furnace is running. The internal condensate drain system can be routed out either the left or right side of furnace as needed.

Technical support: Technical service advisor on staff at local distributor is available. Technical training available at ICP National Training Center (Lewisburg, Tenn.), at field schools held in participating distributor locations nationwide, and in ICP’s new mobile training center.

Noise-reduction features: Equipped with two-stage heating, the furnace operates in the quieter first stage 70 percent to 80 percent of the time. The one-piece steel cabinet is thermal-lined.

Indoor air quality features: Connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the product line.

Additional features: Furnaces are 40 inches tall for easy installation in tight spaces and are multiposition furnaces that can be installed in upflow, downflow, horizontal left, or horizontal right configurations. Solid doors provide sealed combustion compartment. Furnaces are equipped with Honeywell two-stage HSP ignition and have two-stage fan operation. They can be installed with one-pipe or two-pipe venting.

Warranty information: Five years limited on parts, lifetime limited on heat exchangers. A HELP® extended service agreement is available on Comfortmaker products, offering a five-year and 10-year extended service agreement on parts and labor.

Special installation requirements: Shipped as natural gas in upflow configuration, with all parts included for downflow, horizontal-left and right with no need for accessory conversion kits. LP gas kits available.

Contact: ComfortMaker, Nashville, Tenn.; Attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.comfortmaker.com.

eProduct #242

Ducane

Footprint (in inches): Varies.

Serviceability features: LED diagnostics.

Technical support: Available at 803-284-3322 from 8 a.m. to 6 p.m. Eastern Time.

Noise-reduction features: Whisper burners, dynamically balanced blower wheel, and 100 percent sealed combustion designed for quiet operation.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares most replacement parts.

Additional features: Built to resist corrosion, with crimped seams for a leak-free seal that is more reliable than conventional welding, the company states.

Warranty information: Limited lifetime on heat exchanger, five years on parts.

Special installation requirements: Manufacturer didn’t specify.

Contact: Ducane, Blackville, S.C.; Attn: Donna Brower, 803-284-3822; 803-284-2833 (fax); donna.brower@excel-csi.com; www.ducanehvac.com.

eProduct #243

Model: Horizontal 80 gas furnace

Footprint (in inches): Varies.

Serviceability features: LED diagnostics.

Technical support: Available at 803-284-3322 from 8 a.m. to 6 p.m.

Noise-reduction features: Three-speed PSC dynamically balanced blower, whisper burners, and insulated cabinet are designed for quiet, efficient operation.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts.

Additional features: No field conversion necessary for horizontal application.

Warranty information: Twenty-five years on heat exchanger, five years on parts.

Special installation requirements: Manufacturer did not specify.

Contact: Ducane, Blackville, S.C.; Attn: Donna Brower, 803-284-3822; 803-284-2833 (fax); donna.brower@excel-csi.com; www.ducanehvac.com.

eProduct #244

FHP Mfg.

Footprint (in inches): 26 by 33

Serviceability features: Service access is through one blower and two compressor access panels. Fault identification is provided on UPM controller for high and low pressure, condensate overflow, and freeze protection.

Technical support: Troubleshooting assistance is provided at 954-776-5471 during normal working hours.

Noise-reduction features: Noise reduction packages are optional. Units feature Copeland Scroll Ultratech™ compressors.

Indoor air quality features: The UltraTech compressor incorporates two-step design. Systems maintain more precise temperature levels and lower relative humidity, reducing possibility of mold, the company states.

Thermostat compatibility: Compatible with a two-step cooling, three-step heating thermostat suitable for heat pump operation.

Replacement parts compatibility: Commonality of parts with other products offered by FHP other than the compressors.

Additional features: The UltraTech™ two-step scroll compressor uses R-410A coupled with an ECM blower motor.

Warranty information: One year on all parts, five years on compressor and refrigeration components. Optional extended warranty is available.

Special installation requirements: Installation is standard as with any water-source heat pump.

Contact: FHP Manufacturing, Fort Lauderdale, Fla.; Attn: Chris Smith, 954-776-5471; 954-776-5529; heatpump@fhp-mfg.com; www.fhp-mfg.com.

eProduct #245

First Co.

Footprint (in inches): 28 by 25

Serviceability features: Easy access to all components through front of unit, including circulation pump.

Technical support: Available at 214-388-5751, Monday through Friday from 8 a.m. to 5 p.m.

Noise-reduction features: Manufacturer did not specify.

Indoor air quality features: Includes an A-frame coil for up to 14-SEER efficiency.

Thermostat compatibility: Compatible with most or all 24-V thermostats.

Replacement parts compatibility: Shares parts with other First Co. units.

Additional features: Factory-installed circulation pump, time delays on heat eliminating the need for aquastat, and blower off delay for cooling mode designed to increase efficiency, the company states.

Warranty information: One year on parts.

Special installation requirements: Manufacturer did not specify.

Contact: First Co., Dallas; Attn: Austin Horton, 214-388-5751; 214-388-2255 (fax); sales@firstco.com; www.firstco.com.

eProduct #246

Friedrich Air Conditioning

Footprint (in inches): 16-3/4 (h) by 27 (w)

Serviceability features: Slide-out chassis.

Technical support: Available at 210-357-4400, ext. 662.

Noise-reduction features: Thick bulkhead insulation and improved blower scroll.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Fits all through-the-wall sleeves that measure 16-3/4 (h) by 27 (w)

Additional features: Highest capacity heat/cool, solid-sided, through-the-wall unit on the market, the company states.

Warranty information: One-year coverage of all functional parts and labor allowance. Five-year sealed system coverage for parts and labor.

Special installation requirements: Easy to install, as the old unit must be unplugged and pulled from the wall sleeve, and the new WE15A33 only needs to be slid into the sleeve and plugged in to be operational.

Contact: Friedrich Air Conditioning, San Antonio, Texas; Attn: Sales Department, 210-357-4400; 210-357-4480 (fax); appliance.sales@friedrich.com; www.friedrich.com.

eProduct #247

Model: WallMaster, Model WY12A33G

Footprint (in inches): 16-3/4 (h) by 27 (w)

Serviceability features: Slide-out chassis.

Technical support: Available at 210-357-4400, ext. 662.

Noise-reduction features: Thick bulkhead insulation and improved blower scroll.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Fits all through-the-wall sleeves that measure 16-3/4 (h) by 27 (w)

Additional features: Highest capacity heat/cool, solid-sided, through-the-wall heat pump on the market, the company states.

Warranty information: One-year coverage of all functional parts and labor allowance. Five-year sealed system coverage for parts and labor allowance.

Special installation requirements: Easy to install, as the old unit must be unplugged and pulled from the wall sleeve, and the WY12A33G only needs to be slid into the sleeve and plugged in to be operational.

Contact: Friedrich Air Conditioning, San Antonio, Texas; Attn: Sales Department, 210-357-4400; 210-357-4480 (fax); appliance.sales@friedrich.com; www.friedrich.com.

eProduct #248

Frigidaire

Footprint (in inches): 43 (h) by 28 (d) by 20 (w)

Serviceability features: Diagnostics on circuit board with a flame signal indicator.

Technical support: Available at 800-4AC-HEAT (800-422-4328) from 8:00 a.m. to 4:30 p.m. Central Time.

Noise-reduction features: Fully insulated blower cabinet, quiet variable-speed motor.

Indoor air quality features: Enhances overall air quality by minimizing air stratification of stagnant air. It is designed to mix air from floor to ceiling, creating a more uniform temperature and enhancing comfort.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum parts commonality with other Frigidaire furnaces.

Additional features: SmartLite™ integrated control board is designed to provide extended life to igniters in furnaces using hot surface ignition technology.

Warranty information: Eight years on parts and five-year quality pledge to replace the entire furnace if the heat exchanger fails. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Frigidaire, O’Fallon, Mo.; Attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.frigidaire.net.

eProduct #249

Model: FG6TA two-stage gas furnace

Footprint (in inches): 43 (h) by 28 (d)

Serviceability features: Diagnostics on circuit board with a flame signal indicator.

Technical support: Available at 800-4AC-HEAT (800-422-4328) from 8:00 a.m. to 4:30 p.m. Central Time.

Noise-reduction features: Fully insulated blower cabinet.

Indoor air quality features: Enhances overall air quality by minimizing air stratification of stagnant air. It is designed to mix air from floor to ceiling, creating a more uniform temperature and enhancing comfort.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Only two unique items (gas manifold and solenoid valve) separate this furnace from our single-stage gas furnaces.

Additional features: Unique and simple application of two-stage heat. SmartLite™ integrated control board provides extended life to igniters in furnaces using hot surface ignition technology.

Warranty information: Eight years on parts and five-year quality pledge to replace the entire furnace if the heat exchanger fails. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Frigidaire, O’Fallon, Mo.; Attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.frigidaire.net.

eProduct #250

Fujitsu General America

Footprint (in inches): 37 (w) by 15 (d) by 46 (h)

Serviceability features: All plastic flaps without velvet coating and flat surface grille are designed for easy cleaning. Hinged cover provides easy access to filter. Most major components are accessible below the ceiling.

Technical support: Service hotline is available 9 a.m. to 5 p.m. Eastern Time at 973-575-0381.

Noise-reduction features: 59 decibels.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: System comes with hard-wired digital remote with weekly timer. Sixteen Fujitsu Halcyon Ceiling Cassette Systems can be wired to one remote.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Slender-Fit feature allows cassette body to be moved downward into the room 1-3/8 inches to accommodate limited space above the ceiling. Requires just 9-7/8 inches of clearance when the Slender-Fit feature is used. Two optional 4-inch, field-installed branch ducts can each move up to 25 percent of the capacity to another space or part of the room. Knockout is provided for optional fresh air intake. Built-in condensate pump with 31-1/2-inch lift; condensate can then be drained by gravity to an outside wall.

Warranty information: One year on parts and five years on compressor.

Special installation requirements: Manufacturer did not specify.

Contact: Fujitsu General America, Fairfield, N.J.; Attn: Roy Kuczera, 973-575-0380; 973-575-7509 (fax); fghvac@fujitsugeneral.com; www.fujitsugeneral.com.

eProduct #251

Goodman

Footprint (in inches): 14 (w) by 28 (d) by 46 (h)

Serviceability features: Integrated furnace control with diagnostics.

Technical support: Manufacturer did not specify.

Noise-reduction features: Runs quietly on low stage, producing just 25 percent of the normal high-fire sound.

Indoor air quality features: Runs for longer periods of time on low speed, so filters can remove more impurities.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Many parts are shared with other models.

Additional features: High-quality tubular heat exchanger for extra-long life.

Warranty information: Limited lifetime on the heat exchanger. If the heat exchanger fails in the first 10 years, company will replace the entire furnace.

Special installation requirements: For direct vent (two pipe) or non-direct vent (one pipe).

Contact: Goodman, Houston; Attn: Jim Miller, 713-861-2500, ext. 570; 713-861-0772 (fax); jim.miller@goodmanmfg.com; www.goodmanmfg.com.

eProduct #252

Heil

Footprint (in inches): 19-1/8 to 24-1/2 (w) by 29 (d)

Serviceability features: The new internal condensate drain system can be routed out either the left or right side of the furnace as needed. The furnace includes a built-in electronic diagnostic system that can be used even while the furnace is running. Extra-spacious service compartments.

Technical support: Technical service advisor on staff at local distributor is available. Technical training is available at ICP National Training Center (Lewisburg, Tenn.), at field schools held in participating distributor locations nationwide, and in ICP’s new mobile training center.

Noise-reduction features: The one-piece steel cabinet is thermal lined; insulated blower compartment provides added sound protection.

Indoor air quality features: Connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components of this product are standardized throughout the product line.

Additional features: Furnaces are 40-inches tall for easy installation in tight spaces and can be installed in upflow, downflow, horizontal-left, or horizontal-right configurations, with one- or two-pipe venting. Solid doors provide sealed combustion compartment. A high-airflow 100,000-Btuh model is available for 5-ton cooling applications. Furnace is equipped with Honeywell SmartValve II ignition system and has single-stage fan operation. Meets California standards for low NOx emissions.

Warranty information: Five years limited on parts, lifetime limited on heat exchangers. A HELP® extended service agreement is available on Heil products, offering a five-year and 10-year extended service agreement on parts and labor.

Special installation requirements: Furnaces come ready for upflow installation with all the parts for downflow or horizontal conversions included. Most hose and clamp connections are now pre-made by the factory.

Contact: Heil, Nashville, Tenn.; Attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.heil-hvac.com.

eProduct #253

Model: QuietComfort IIS 80 gas furnace

Footprint (in inches): 15-1/2 to 22-3/4 (w) by 29 (d)

Serviceability features: Easy on/off double-wall door (patent pending) has built-in sound shield, eliminating hard-to-remove burner enclosures. Height of 40 inches provides easy installation in tight spaces. Extra-spacious service compartments. Built-in diagnostic system can be used even while the furnace is running.

Technical support: Technical service advisor on staff at local distributor is available. Technical training available at ICP National Training Center (Lewisburg, Tenn.), at field schools held in participating distributor locations nationwide, and in ICP’s new mobile training center.

Noise-reduction features: Designed with a unique double-wall door (patent pending) to reduce operating noise. The unit has two-stage heating. For horizontal applications, a rotatable inducer motor has been designed for quieter operation.

Indoor air quality features: Connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components of this product are standardized throughout the product line.

Additional features: RPJ® III heat exchanger. Two-stage, multiposition furnaces can be installed in upflow, downflow, horizontal left, or horizontal right configurations. An optional chimney vent kit (available on most models) eliminates the need for chimney liner.

Warranty information: Five years limited on parts, 25 years limited on heat exchangers. A HELP® extended service agreement is available on Heil products, offering a five-year and 10-year extended service agreement on parts and labor.

Special installation requirements: Meets California standards for low NOx emissions. A downflow vent guard kit is required for use on multiposition models when installed as downflows. A type B-vent connector after the vent guard is required for all two-stage applications.

Contact: Heil, Nashville, Tenn.; Attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.heil-hvac.com.

eProduct #254

Kelvinator

Footprint (in inches): 31 (w) by 31 (d)

Serviceability features: Manufacturer did not specify.

Technical support: Available at 800-4AC-HEAT (800-422-4328) from 8:00 a.m. to 4:30 p.m. Central Time.

Noise-reduction features: Hot gas muffler reduces compressor noise and vibration.

Indoor air quality features: Along with optimum efficiency, a variable-speed air handler or gas furnace will enhance overall air quality by minimizing air stratification or stagnant air. Filtration and humidity removal are also improved as airborne particles and moisture are captured more effectively.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum commonality with other Kelvinator condensing units.

Additional features: SteelGuard protecting the coil.

Warranty information: Six years on parts, 10 years on compressor. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Kelvinator, O’Fallon, Mo.; Attn: Marc DeLaurent, 636-651-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.nordyne.com.

eProduct #255

Lennox Industries

Footprint (in inches): 18 by 29, 21 by 29, or 25 by 29

Serviceability features: Exclusive SureLight® integrated control features adaptive technology de-signed to continually monitor and adjust the igniter power at the minimum temperature required for ignition, thus prolonging igniter life. Control board has six LEDs for troubleshooting.

Technical support: Toll-free technical service and Web site access to engineering data, wiring diagrams, and service literature (www.lennoxdavenet.com). Toll-free application and service assistance is available to Lennox dealers 12 hours a day, five days a week at 800-453-6669.

Noise-reduction features: Manufacturer did not specify.

Indoor air quality features: Designed for use with Lennox Healthy Climate IAQ products, including industry-exclusive PureAir™ air purification system.

Thermostat compatibility: Compatible with most thermostats, with premium benefits obtained through use with the SignatureStat™ Home Comfort Control.

Replacement parts compatibility: Shares many common components.

Additional features: Non-direct vent design for high-efficiency residential new construction applications.

Warranty information: One year limited on parts, three years limited on controls, 20 years limited on heat exchanger.

Special installation requirements: Manufacturer did not specify.

Contact: Lennox Industries, Richardson, Texas; Attn: Tonya Knott, 972-497-6020; 972-497-5292 (fax); tonya.knott@lennoxintl.com; www.lennox.com.

eProduct #256

Model: G51 gas furnace

Footprint (in inches): 18 by 29, 21 by 29, or 25 by 29

Serviceability features: Exclusive SureLight® integrated control features adaptive technology designed to continually monitor and adjust the igniter power at the minimum temperature required for ignition, thus prolonging igniter life. Control board has six LEDs for troubleshooting.

Technical support: Toll-free technical service and Web site access to engineering data, wiring diagrams, and service literature (www.lennoxdavenet.com). Toll-free application and service assistance is available to Lennox dealers 12 hours a day, five days a week at 800-453-6669.

Noise-reduction features: Insulated blower compartment, enclosed burners, and quiet components.

Indoor air quality features: Designed for use with Lennox Healthy Climate IAQ products, including industry-exclusive PureAir™ air purification system.

Thermostat compatibility: Compatible with most thermostats, with premium benefits obtained through use with the SignatureStat™ Home Comfort Control.

Replacement parts compatibility: Shares many common components.

Additional features: Multiposition design can be applied in upflow, horizontal-left, horizontal-right, or downflow configuration with no internal changes needed.

Warranty information: Five years limited on parts, lifetime limited on heat exchanger.

Special installation requirements: Manufacturer did not specify.

Contact: Lennox Industries, Richardson, Texas; Attn: Tonya Knott, 972-497-6020; 972-497-5292 (fax); tonya.knott@lennoxintl.com; www.lennox.com.

eProduct #257

Luxaire

Footprint (in inches): 40 (h) by 17-1/2 (w) by 28-1/2 (l)

Serviceability features: Control box has been relocated to the front of the furnace. Capacitor moved to blower housing provides easier access for service and blower removal. Relocated door switch allows for removal of blower without removal of separate switch and bracket.

Technical support: First level of support is provided by distribution; factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern Time.

Noise-reduction features: Top discharge carries noise up and away from landscaping.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Designed with contractors in mind, this low-profile unit is perfect for the new construction and replacement market, the company states. It is Energy Star compliant.

Warranty information: Fifteen years on heat exchanger, five years limited on parts.

Special installation requirements: Manufacturer did not specify.

Contact: Luxaire, Norman, Okla.; Attn: Mark Ritz, 405-419-6537; mark.ritz@york.com.

eProduct #258

Maytag

Footprint (in inches): 56 (w) by 47 (d)

Serviceability features: Easy accessibility to controls and major components.

Technical support: Available at 866-2-MAYTAG (866-262-9824) from 8:00 a.m. to 4:30 p.m. Central Time.

Noise-reduction features: Twenty-inch fan blade combined with custom venture condenser promotes quiet operation and low vibration.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum commonality with other Maytag gas furnaces/gas packs.

Additional features: Smart Start™ control board is designed to learn the start-up characteristics for the most efficient start-up time, extending the life of the igniter.

Warranty information: Ten years on parts and labor, five-year dependability promise to replace the entire unit if the heat exchanger fails.

Special installation requirements: A transformer upgrade kit is required when combined with a gas furnace and fossil fuel kit.

Contact: Maytag, O’Fallon, Mo.; Attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.maytaghvac.com.

eProduct #259

Model: PSH4BF two-stage heat pump

Footprint (in inches): 31 (w) by 31 (d)

Serviceability features: Smart Watch™ comfort alert diagnostic module detects system and electrical problem conditions. A diagnostics key directs the service technician to the root cause of a problem.

Technical support: Available at 866-2-MAYTAG (866-262-9824) from 8:00 a.m. to 4:30 p.m. Central Time.

Noise-reduction features: Hot gas muffler reduces compressor noise and vibration.

Indoor air quality features: Along with optimum efficiency, a variable-speed air handler or gas furnace will enhance overall air quality by minimizing air stratification or stagnant air, the company states. Filtration and humidity removal is also improved, as airborne particles and moisture are captured more effectively.

Thermostat compatibility: Two-stage heating and two-stage cooling thermostat required.

Replacement parts compatibility: Maximum commonality with other Maytag condensing units.

Additional features: Two-stage heating and cooling. Protected with a brushed stainless steel cabinet, accented with a charcoal-gray protective silicone coating on the top and bottom panels. Uses an environmentally friendly R-410A.

Warranty information: Ten years on parts and labor, five-year dependability promise.

Special installation requirements: A transformer upgrade kit is required when combined with a gas furnace and fossil fuel kit.

Contact: Maytag, O’Fallon, Mo.; Attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.maytaghvac.com.

eProduct #260

Mitsubishi Electric

Footprint (in inches): 34 by 12

Serviceability features: Front and side access to compressor and control boards.

Technical support: Available from 9 a.m. to 5 p.m. at 800-811-3112 (East), 800-811-3114 (Central), or 800-811-3115 (West). Automated toll-free 24-hour service line is available at 866-840-4822.

Noise-reduction features: Indoor unit dBA is 39 (low), 43 (medium), and 47 (high), the company states.

Indoor air quality features: “DRY” feature helps control humidity. The benefit of the air handler (indoor fan cool) being within the space promotes added humidity control, the company states.

Thermostat compatibility: Mitsubishi Electric Mr. Slim wireless remote controller only.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: One of the quietest 2-ton indoor units available, the company says.

Warranty information: Six years on compressor, one year on parts.

Special installation requirements: Insulate both refrigerant lines separately.

Contact: Mitsubishi Electric HVAC, Lawrenceville, Ga.; Attn: Mike Smith, 678-376-2900; 678-376-3540 (fax); info@hvac.mea.com; www.MitsubishiElectric.com/HVAC.

eProduct #261

Peerless Boilers

Footprint (in inches): 31 by 21 by 26

Serviceability features: Control board features an LED light indicator that confirms normal system operation. Easy-access front panel.

Technical support: Manufacturer did not specify.

Noise-reduction features: Manufacturer did not specify.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: All items are unique.

Additional features: Small footprint, 92-percent AFUE.

Warranty information: One-year parts and labor warranty on entire boiler. Limited 12-year heat exchanger warranty. Five- and 10-year extended warranties are available for purchase.

Special installation requirements: Venting with Schedule 40 PBC. Boiler requires high flow rate.

Contact: Peerless Boilers, New Berlinville, Pa.; Attn: Pete Morgan, 610-369-3220; 610-369-3284 (fax); marketing@PeerlessBoilers.com; www.peerlessboilers.com.

eProduct #262

Philco

Footprint (in inches): 31 (w) by 31 (d)

Serviceability features: Manufacturer did not specify.

Technical support: Available at 800-4AC-HEAT (800-422-4328) from 8:00 a.m. to 4:30 p.m. Central Time.

Noise-reduction features: Hot gas muffler reduces compressor noise and vibration.

Indoor air quality features: Along with optimum efficiency, a variable-speed air handler or gas furnace will enhance overall air quality by minimizing air stratification or stagnant air, the company says. Filtration and humidity removal is also improved, as airborne particles and moisture are captured more effectively.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum commonality with other Philco condensing units.

Additional features: SteelGuard protecting the coil.

Warranty information: Six years on parts, 10 years on compressor. Extended product protection is available.

Special installation requirements: Manufacturer didn’t specify.

Contact: Philco, O’Fallon, Mo.; Attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.nordyne.com.

eProduct #263

Quietside Boilers

Footprint (in inches): 36 (h) by 20 (w) by 10 (d)

Serviceability features: Self-diagnostic microprocessor will display up to 17 fault codes as applicable to pinpoint the fault in the unit. All items are serviceable from the front. Many components have quick-release connections. All electrical connections use Molex-style plugs.

Technical support: Available from 8:00 a.m. to 5:30 p.m. Pacific Time at 562-463-0880 or 8:00 a.m. to 5:00 p.m. Eastern Time at 717-243-2535.

Noise-reduction features: Modulating fan for low noise level.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Modulating gas valve. Ability to provide heating water and domestic hot water without any additional components. Secondary stainless steel heat exchanger will act as a condensing heat exchanger for additional efficiency.

Warranty information: One year on parts, limited lifetime on whole unit.

Special installation requirements: Sealed combustion with long vent lengths. Unit is wall mounted, with all connections at the base of the unit; 24-VDC control wiring. Pump and expansion tank included in the unit.

Contact: Quietside Boilers, Whittier, Calif.; Attn: John Miles, 562-463-0880, ext. 229; 562-463-5665 (fax); johnm@quietside.com; www.quietside.com.

eProduct #264

Model: QXM8, 070, 095, 140, SS-170 combination boiler

Footprint (in inches): 30 by 16

Serviceability features: Self-diagnostic microprocessor will display fault indicators showing the location of the fault. All electrical wiring is connected using Molex plugs for ease of connection. All components can be accessed from the front or top of the unit

Technical support: Available from 8:00 a.m. to 5:30 p.m. Pacific Time at 562-463-0880 or 8 a.m. to 5 p.m. Eastern Time at 717-243-2535.

Noise-reduction features: Insulation.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Combination boiler capable of supplying both space heating water and domestic hot water from the same unit; built-in circulating pump for the space heating water. Heating water temperature can be selected at unit.

Warranty information: One year on parts, 20 years on whole unit; SS-170 — limited lifetime.

Special installation requirements: Sealed combustion allows for long vent lengths, up to 31 feet equivalent length, and cleaner operation. SS-170 unit features a stainless steel heat exchanger.

Contact: Quietside Boilers, Whittier, Calif.; Attn: John Miles, 562-463-0880, ext. 229; 562-463-5665 (fax); johnm@quietside.com; www.quietside.com.

eProduct #265

Rheem Air Conditioning

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Because of the low-profile 34-inch height, the upflow model can also be used to satisfy most applications that traditionally call for a horizontal furnace, the company states. Easy-access door panels.

Technical support: Available Monday through Friday at 479-648-4900.

Noise-reduction features: Insulated blower compartment, slow-opening gas valve, and specially designed inducer system.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with single- or two-stage thermostats. For optimal performance, a two-stage thermostat is recommended.

Replacement parts compatibility: Shares replacement parts with other models within the gas furnace line.

Additional features: Manufacturer did not specify.

Warranty information: Primary and secondary heat exchanger have a limited lifetime warranty. Any other part has a five-year warranty.

Special installation requirements: Typical installation.

Contact: Rheem Air Conditioning, Fort Smith, Ark.; 479-646-4311; 479-648-4918 (fax); www.rheemac.com.

eProduct #266

Ruud Air Conditioning

Footprint (in inches): Manufacturer did not specify.

Serviceability features: Easy-access door panels. Because of the low-profile 34-inch height, the upflow model can also be used to satisfy most applications that traditionally call for a horizontal furnace, the company states.

Technical support: Monday through Friday at 479-648-4900.

Noise-reduction features: Insulated blower compartment, slow-opening gas valve, and specially designed inducer system.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with single- or two-stage thermostats. For optimal performance, a two-stage thermostat is recommended.

Replacement parts compatibility: Shares replacement parts with other models within the gas furnace line.

Additional features: Manufacturer did not specify.

Warranty information: Primary and secondary heat exchanger have a limited lifetime warranty. Any other part has a five-year warranty.

Special installation requirements: Typical installation.

Contact: Ruud Air Conditioning, Fort Smith, Ark.; 479-646-4311; 479-648-4918 (fax); www.ruudac.com.

eProduct #267

Sanyo Fisher Co.

Footprint (in inches): 29 by 12 by 31

Serviceability features: Self-diagnostics.

Technical support: Available at 770-509-5230.

Noise-reduction features: Indoor: 54 dBA; outdoor: 43 dBA.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Unique operation. Unlike heat pump, it has no defrost cycle. Operation down to -20 degrees F. High-efficiency, non-condensing unit with heating and normal A/C cycle.

Warranty information: Five years on compressor, five years on whole unit, one year on parts.

Special installation requirements: Manufacturer didn’t specify.

Contact: Sanyo Fisher Co., Chatsworth, Calif.; Attn: Tom Crock, 818-998-7322; 818-701-4170 (fax); www.sanyohvac.com.

eProduct #268

Tappan

Footprint (in inches): 31 (w) by 31 (d)

Serviceability features: PrimeTell™ Comfort Alert Diagnostic Module detects system and electrical problem conditions. A diagnostics key directs the service technician to the root cause of a problem.

Technical support: Available at 800-4AC-HEAT (800-422-4328) from 8:00 a.m. to 4:30 p.m. Central Time.

Noise-reduction features: Hot gas muffler reduces compressor noise and vibration.

Indoor air quality features: Along with optimum efficiency, a variable-speed air handler or gas furnace will enhance overall air quality by minimizing air stratification or stagnant air, the company states. Filtration and humidity removal is also improved, as airborne particles and moisture are captured more effectively.

Thermostat compatibility: Two-stage heating and two-stage cooling thermostat is required.

Replacement parts compatibility: Maximum commonality with other Tappan condensing units.

Additional features: Uses an environmentally friendly refrigerant, PrimeGuard 410™ (R-410A).

Warranty information: Eight years on parts; five-year quality pledge. Extended product protection is available.

Special installation requirements: A transformer upgrade kit is required when combined with a gas furnace and fossil fuel kit.

Contact: Tappan, O’Fallon, Mo.; Attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.tappan.net.

eProduct #269

Tempstar

Footprint (in inches): 15-1/2 to 22-3/4 (w) by 29 (d)

Serviceability features: Easy on/off double-wall door (patent pending). Unit’s 40-inch height provides easy installation in tight spaces. Extra-spacious service compartments. Furnace includes built-in diagnostic system that can be used even while the furnace is running.

Technical support: Technical service advisor on staff at local distributor is available. Technical training available at ICP National Training Center (Lewisburg, Tenn.), at field schools held in participating distributor locations nationwide, and in ICP’s new mobile training center.

Noise-reduction features: Double-wall door with built-in sound shield and variable-speed circulation blower to reduce operating noise. For horizontal applications, a rotatable inducer motor is designed for quiet operation.

Indoor air quality features: Connections for electronic air cleaner and humidifier.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the product line.

Additional features: RPJ® III heat exchanger. Variable-speed, two-stage, multiposition furnaces that can be installed in upflow, downflow, horizontal left, or horizontal right configurations. An optional chimney vent kit (available on most models) eliminates the need for an expensive chimney liner.

Warranty information: Five years limited on parts, 25 years limited on heat exchangers. A HELP® extended service agreement is available, offering a five-year and 10-year extended service agreement on parts and labor.

Special installation requirements: Furnaces meet California standards for low NOx emissions. A downflow vent guard kit is required for use on multiposition models when installed as downflows. It provides protection against exposed hot surfaces of the vent pipe when the pipe exits the side of the furnace.

Contact: Tempstar, Nashville, Tenn.; Attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.tempstar.com.

eProduct #270

Model: SmartComfort VS 90 gas furnace

Footprint (in inches): 19-1/8 to 24-1/2 (w) by 29 (d)

Serviceability features: Two easy-on/off doors, built-in electronic diagnostic system that can be used even while the furnace is running. The redesigned furnace’s new internal condensate drain system can be routed out either the left or right side of furnace as needed.

Technical support: Technical service advisor on staff at local distributor is available. Technical training available at ICP National Training Center (Lewisburg, Tenn.), at field schools held in participating distributor locations nationwide, and in ICP’s new mobile training center.

Noise-reduction features: Two-stage heating means it operates in the quieter first stage 70 percent to 80 percent of the time, the company states. One-piece, thermal-lined steel cabinet, insulated blower compartment.

Indoor air quality features: Connections for electronic air cleaner, humidifier, and dehumidistat.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Key components are standardized throughout the product line.

Additional features: Solid stainless steel doors. Furnaces are 40 inches tall for easy installation in tight spaces, and can be installed in upflow, downflow, horizontal-left, or horizontal-right configurations with no need to stock an accessory conversion kit. These variable speed, two-stage furnaces can be installed with one-pipe or two-pipe venting. Equipped with Honeywell two-stage HSP ignition.

Warranty information: Five years limited on parts, limited lifetime on heat exchangers. A HELP® extended service agreement is available, offering a five-year and 10-year extended service agreement on parts and labor.

Special installation requirements: Shipped as natural gas in upflow configuration, with all parts included for downflow, horizontal left, and horizontal right with no need for accessory conversion kits. LP gas kits available. Most hose and clamp connections are now pre-made by the factory, substantially reducing the amount of time needed to install the furnace, the company states.

Contact: Tempstar, Nashville, Tenn.; Attn: John Mott, 800-315-4370; 615-383-2215 (fax); john.mott@mottpr.com; www.tempstar.com.

eProduct #271

Texas Furnace

Footprint (in inches): 24 by 28

Serviceability features: Blower assembly is accessible behind access door. No door switch is required.

Technical support: Available 24-hours daily at the Web site, or from 7:30 a.m. to 5:00 p.m. Central Time, Monday through Friday, at 713-466-1504.

Noise-reduction features: Manufacturer did not specify.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares parts with existing models.

Additional features: Designed primarily for southern climates where high airflow and low heat are often needed; 100,000 Btuh input with six tons of airflow. Designed for residential new construction as well as light commercial applications.

Warranty information: Five years limited on parts, 20 years on heat exchanger.

Special installation requirements: Nothing unusual.

Contact: Texas Furnace, Houston; Attn: Francis Franck, 713-466-1504; 713-466-3648 (fax); listen@texasfurnace.com; www.texasfurnace.com.

eProduct #272

Thermo Products

Footprint (in inches): 18 by 25-1/2

Serviceability features: Manufacturer did not specify.

Technical support: Available Monday through Friday at 574-896-2133 or 800-348-5130.

Noise-reduction features: Manufacturer did not specify.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other products in the line.

Additional features: Built with 18-gauge tubular, corrosion-resistant, aluminum-coated heat exchanger; 22-gauge steel cabinet with baked enamel finish; silicone nitride igniter; and four-speed direct-drive blower.

Warranty information: Lifetime warranty limited on heat exchanger, “Peace of Mind” five-year warranty on parts. Also available is the “Enhanced Peace of Mind” warranty, which covers five years on labor or 10 years on parts and labor.

Special installation requirements: Designed to fit on Miller/Nordyne base MA-100 for easy replacement.

Contact: Thermo Products, North Judson, Ind.; 574-896-2133; 574-896-5301 (fax); www.thermopride.com.

eProduct #273

Trane

Footprint (in inches): 37 by 34

Serviceability features: “Quick-Sess” panels and cabinet are designed for quick installation, maintenance, and service. Long and elevated refrigerant stub tube.

Technical support: Local distributor.

Noise-reduction features: Compressor sound insulators and core-filled mounting plate.

Indoor air quality features: Matching with “Comfort R” mode results in lower indoor noise, warmer air temperature, and increased filter efficiency, the company states.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Shares replacement parts.

Additional features: Unit features 19.5-SEER efficiency and two independent stages (compressors) for capacity modulation.

Warranty information: Ten years on compressor, 10 years on all functional parts. Extended parts and labor warranties available up to 10 years.

Special installation requirements: Manufacturer did not specify.

Contact: Trane; www.trane.com.

eProduct #274

Model: XV90 variable-speed gas furnace

Footprint (in inches): 40 (h) by 17-1/2 to 24-1/2 (w) by 28-1/2 (d)

Serviceability features: Integrated furnace control monitors system status and has self-diagnostic capability with built-in LED fault code display. CFM LED on furnace control provides visual confirmation of selected heating and cooling airflows.

Technical support: All Trane distributors have a dedicated field service representative who provides local technical support and training.

Noise-reduction features: “Soft Start” feature of variable-speed blower motor keeps the audible start-up noise to a minimum. Also features louverless furnace doors, sealed combustion chamber, fully insulated furnace cabinet, automotive grade gaskets on the blower compartment doors.

Indoor air quality features: Exclusive “Comfort – R” cooling mode is designed to allow the evaporator to rapidly cool down by staging the airflow during the cooling cycle, resulting in increased moisture removal. The XV90 furnace is factory wired for optional humidifiers and electronic air cleaners. Field connection leads are labeled for easy identification.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer didn’t specify.

Additional features: Exclusive hinged blower door with dual quarter-turn latches. Factory-supplied, spring-loaded filter rack can be used in both bottom- or side-return air applications and accepts standard filters. Vent lengths of up to 200 feet are possible with the Trane variable-speed draft inducer. The use of a variable-speed draft inducer also allows the intake and exhaust vents to be terminated in different pressure zones.

Warranty information: Limited lifetime on heat exchanger. Five years limited on parts.

Special installation requirements: Manufacturer did not specify.

Contact: Trane, Tyler, Texas; 903-581-3200; 903-581-3482 (fax); www.trane.com.

eProduct #275

WaterFurnace

Footprint (in inches): 24 by 31

Serviceability features: Reversible control panel. Front and top access to all components.

Technical support: Training courses and 24-hour factory support.

Noise-reduction features: Sound reduction kit is standard.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Temperature control is integrated.

Replacement parts compatibility: Compatible with E Series products.

Additional features: Ease of installation with control as an integral part of the system. Improved product range with environmentally friendly R-410A.

Warranty information: Ten-year parts and labor allowance standard.

Special installation requirements: Manufacturer didn’t specify.

Contact: WaterFurnace, Fort Wayne, Ind.; Attn: Alex Vagelatos, 260-478-5667; 260-747-5780 (fax); alex_vagelatos@waterfurnace.com; www.waterfurnace.com.

eProduct #276

Westinghouse

Footprint (in inches): 35 (h) by 28 (d)

Serviceability features: Diagnostics on circuit board with a flame signal indicator.

Technical support: Available at 800-4AC-HEAT (800-422-4328) from 8:00 a.m. to 4:30 p.m. Central Time.

Noise-reduction features: Fully insulated blower cabinet.

Indoor air quality features: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Maximum commonality with other Westinghouse furnaces.

Additional features: SmartLite™ integrated control board is designed to provide extended life to igniters in furnaces using hot surface ignition technology.

Warranty information: Eight years on parts, five-year quality pledge. Extended product protection is available.

Special installation requirements: Manufacturer did not specify.

Contact: Westinghouse, O’Fallon, Mo.; Attn: Marc DeLaurent, 636-561-7477; 636-561-7399 (fax); delaurentm@nordyne.com; www.westinghousehvac.com.

eProduct #277

York

Footprint (in inches): 35 by 35

Serviceability features: Exclusive Guard V provides LED diagnostics. Single-side, one-panel service access allows for convenient accessibility.

Technical support: First level of support is provided by distribution; factory support is available to distributors and dealers by calling 877-874-7378 (877-UPG-SERV). Support is available from 7 a.m. to 6 p.m. Eastern Time.

Noise-reduction features: Mufflers, compressor mounts, and specially designed sound blankets reduce sound and vibration.

Indoor air quality features: A 120-V output is located on control board for power humidifier accessory.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: Stealth Hot Heat Pump features Twin Single™ compressor for two levels or “stages” of heating and cooling performance.

Warranty information: Ten years limited on compressor and five years limited on parts.

Special installation requirements: Manufacturer didn’t specify.

Contact: York, Norman, Okla.; Attn: Mark Ritz, 405-419-6537; 405-419-6545 (fax); mark.ritz@york.com; www.yorkupg.com.

eProduct #278

Publication date: 09/22/2003