Knowledge is power. Knowledge also saves power. It makes sense that monitoring energy consumption enables more control over the amount spent on energy. Doing this effectively, however, is not as simple as it sounds.

The electric company typically provides a lump-sum bill at the end of the month. If the current monthly total is higher than the previous month, the cause is often not obvious. Was the increase due to weather, a short-term glitch, or a prolonged pattern of neglecting to pay attention to usage patterns?

Long-Distance Relationship

It is difficult enough to get control of energy usage when it’s constantly monitored, but the problem is even tougher for businesses that manage remote facilities, thousands of miles apart. Among the industries grappling with the issue of large energy bills are self-storage companies who manage large volumes of climate-controlled space. Most often they have a network of large-capacity buildings throughout the country where a significant amount of energy consumption occurs, and a single corporate office that sets energy-use policies pays the bills.

Continuous monitoring and control is required for personnel at the home office to know whether energy-use directives are being complied with at each site. For example, a corporate standard may dictate what temperatures should be maintained at a facility, but often the thermostats aren’t locked and customers and employees can freely change the temperature settings. People also forget to turn lights off when they leave.

The amount of wasted energy depends on the level of attention each store or district manager is giving to the situation, but on-site store managers may understandably be more concerned with activities directly tied to the increasing number of units rented and other revenue-generating activities. The local power company typically has little incentive to help.

Energy monitors and control-system providers are sensitive to this problem, and apply their knowledge of automation technologies to implement control strategies that consistently save businesses as much as 30-35 percent on their energy bills. The savings are realized quickly enough to achieve a six-month to two-year return on investment when an energy management and control system is installed.

Let’s take Safeguard Self Storage Inc. of Atlanta as a case in point. Corporate facilities-management personnel in Atlanta are responsible for managing the company’s 60-plus locations nationwide. About three years ago, headquarters suspected that money was being wasted on excessive energy use at Safeguard’s Bronx, New York facility. At that time, energy for this facility was costing Safeguard approximately $55,000 per year.

Safeguard contracted with Envirotrols Group, a supplier and integrator of environmental control systems based in Delmar, Del., to perform a study of the energy consumption patterns at the Bronx site. Envirotrols found that the thermostat at the facility was being maintained at 72˚F throughout the year, despite a corporate standard of 78˚ in summer and 55˚ in winter. Even more excessive cooling or heating was occurring because the thermostats had lockboxes that weren’t locked and anyone could change the settings at will.

In addition, the inspector found that the outside lights were on continuously because time-clock settings were removed. Facility energy costs can be reduced significantly by shutting off unnecessary lighting outside of operating hours, although this is not always desirable for security reasons.

As a result of the findings in the report, Safeguard asked the Envirotrols Group to help them bring energy costs under control at the Bronx facility. Envirotrols technicians removed the building’s thermostats and light switches and installed an Energy Management and Control System (EMCS) manufactured by ASI Controls Inc. of San Ramon, Calif. The system provides automated lighting and climate control for the Bronx facility consistent with Safeguard’s corporate energy-use policies.

The EMCS system is configured to meet specific customer needs. For example, Envirotrols technicians enter a peak demand (peak kW) target specific to each facility under central control. The EMCS continuously monitors electrical loads and forecasts peak demand that will occur in the local utility’s time window, normally a 15 or 30 minute time span that the utility uses for computing excess energy consumption. If demand spikes for a few minutes, the system can automatically adjust building temperature set points, implement duty cycling, and initiate other load-shedding measures designed to cut demand and keep the facility under its target. After the high-demand event occurs, the system resumes normal operation.

Envirotrols works with the on-site store manager and corporate office to plan the order in which systems will get adjusted, and the extent to which output is reduced or turned off, to minimize any negative impacts on normal business operations, and then configures the system to implement those pre-planned control strategies in the event of a demand spike.

Controlled Climate

Facility space-conditioning requirements and energy-cost tolerances can be based on many factors, so being configurable to meet specific facility requirements is a key requirement for the building control system. For example, in multi-floor storage buildings, the top floors typically have the most heat load so the EMCS is configured to shed cooling equipment loads on the core and lower floors first.

The EMCS system relies on a power meter for accurate, continuous monitoring of loads in the facility. For ease of installation, the system uses Rogowski-style current transformers (CTs). Envirotrols uses PowerScout™ meters manufactured by Dent Instruments of Bend, Oregon.

A major reason for selecting the PowerScout is the ease of installation of the flexible RoCoil™ CTs, and easy Modbus integration to the central ASI Controls system. The flexible rope-style sensor coils are installed around the electrical service lines going to the lighting and HVAC equipment. Their flexibility makes them easier and faster to install in most cases than current sensors that employ rigid clamps. The PowerScout RoCoil CTs also support a 50-5000 A range so one set of the CTs can provide accurate data whether the facility is at peak demand or is fully turned down.

The energy management and control system is securely accessible on the Web, so Safeguard’s energy managers in Atlanta can safely and conveniently view real-time energy consumption of any location in their network at any time. The building control system also produces automated notifications when it detects problem conditions occurring. Local and regional managers use a Web browser to view the status of any facility that reports to them, but only on-site managers are granted the authority to override the control system and allow a facility to deviate from corporate energy-use guidelines when the need is justified.

Envirotrols engineers monitor their customers’ energy consumption, too. They can tell their customers when a problem load comes on because the power meter helps them instantaneously know when a problem has occurred. The real payoff, however, is in analyzing the data. The ASI system is set up so that the Safeguard IT people are able to develop their own reports, customized for their own usage.

The controls are also designed to protect against tampering with temperatures at the site. For example, if someone puts a heat lamp on a sensor at a remote storage site to try and activate the air conditioning system, an EMCS alarm event is triggered and an email is sent to corporate headquarters. The alarms also appear on the system’s Web monitoring screens.

To make it easier to compare the levels of energy usage over time, the reports are normalized based on historical temperature data, factoring out the effects of different weather patterns year over year. To help storage companies compare facility performance across their network, the reports are able to display energy usage on a square-foot basis.

Rapid Returns

With the installation of the new control and monitoring system, Safeguard cut the energy-demand charge component of the monthly power bill by two-thirds, and achieved a nine- to 24-month return on its energy cost-management system investment.

“By focusing on demand control, we are reducing our carbon footprint, lowering our operating costs, and improving our margins,” said Mike Frosaker, vice president of asset management, Safeguard Self Storage. “Also, by monitoring our HVAC units, we were able to reduce our maintenance cost by 28 percent with a savings of $44,000.”

Since the Bronx pilot project, the monitoring and control system installation has been repeated at 61 other Safeguard facilities with similar positive results. For example the Oak Lane facility in Philadelphia saved $20,000 in energy costs the first year after an initial investment of just $14,000.

Personnel at the Envirotrols office monitor every installed system for six months and guide the customers as to how to utilize the information to diagnose problems and save energy costs. When they find things worthy of noting, they do a screen capture of the graphs and send explanations to their customers. They can also look at customers’ power bills and, when they see anomalies or trends, investigate why this is occurring. The system integrator can tell customers exactly what the extra power is costing them while verifying that the customer is on track to achieve the return on investment target.

Publication date: 6/24/2013 

Want more HVAC industry news and information? Join The NEWS on Facebook, Twitter, and LinkedIn today!