HVAC Breaking News

June 20, 2013: Updated Edition of ASHRAE Handbook Released

Heat Gain and Load Density Data Are Updated

June 20, 2013
ATLANTA — Outdated internal equipment heat gain data can result in oversized HVAC systems and higher operating costs, noted ASHRAE. To assist the industry in defining these loads and designing more cost-efficient HVAC systems, internal equipment heat gain and load density data have been updated in the newest edition of the ASHRAE Handbook.

The 2013 ASHRAE Handbook–Fundamentals covers basic principles and data used in the HVACR industry, including updated information on building materials, load calculations, energy resources and analysis, refrigerants, indoor environmental quality (IEQ), sustainability, controls, duct and piping system design, and more.

Major revisions were made to Chapter 18, Nonresidential Cooling and Heating Load Calculations, including the new internal heat gain data and recommendations, an elevation correction example, and an equation summary.

“Older assumptions based on out-of-date computer, copier, and printer heat gains can result in significantly oversized HVAC systems resulting in higher first cost and operating cost,” said Steven Bruning, Handbook subcommittee chair of Technical Committee 4.1, Load Calculation Data and Procedures. “The new data in the Handbook chapter reflect ongoing ASHRAE research results.”

The chapter also includes a new master example section based on the renovated ASHRAE headquarters building. The updated example reflects current practice in energy efficient building construction, lighting loads, and updated Standard 90.1, Energy Standard for Buildings Except Low-Rise Residential Buildings, compliance, as opposed to the previous example, which reflected 1990s practice.

In addition, the climatic design content of 2013 Fundamentals has been expanded to include data from nearly 900 more worldwide reporting stations than the 2009 volume — a 16 percent increase. Chapter 14, Climatic Design Information, now contains temperature and humidity design conditions and related information for 6,443 locations in the United States, Canada, and other countries around the world. The increase in the number of weather station’s data is a result of ASHRAE Research Project 1613.

“The increased number of stations, particularly noticeable in North and Central America (+26 percent), results in a better geographical coverage and enables designers to find a station closer to the location for which a building is designed,” said Didier Thevenard, chair of Technical Committee 4.2, Climatic Information.

Each station’s data now also include monthly precipitation, used in particular to determine climate zones in Standard 90.1. The method and supporting data to calculate solar irradiance during clear sky conditions were also updated.

Other new information can be found in Chapters 2, Thermodynamics and Refrigeration Cycles; 5, Two-Phase Flow; 9, Thermal Comfort; 10, Indoor Environmental Health; 11, Air Contaminants; 16, Ventilation and Infiltration; 19, Energy Estimating and Modeling Methods; 21 Duct Design; 23 Insulation for Mechanical Systems; 25, Heat, Air and Moisture Control in Building Assemblies—Fundamentals; 26, Heat, Air and Moisture Control in Building Assemblies—Material Properties; 27, Heat, Air and Moisture Control in Building Assemblies—Examples; 29, Refrigerants; 30, Thermophysical Properties of Refrigerants ; and 36, Measurement and Instruments.

The 2013 ASHRAE Handbook is published in two editions: inch-pound (I-P) units of measurement and the International System of Units (SI).

The new 2013 volume will be added to ASHRAE Handbook Online by the end of June. Members can subscribe for $49 (list $249) and get immediate, searchable access to all four volumes in both I-P and SI units.

The cost of the 2013 ASHRAE Handbook—Fundamentals, which includes the CD is $199, in I-P or SI. The 2013 ASHRAE Handbook CD, which contains both the I-P and SI editions, costs $179.

To order, contact ASHRAE Customer Service at 800-527-4723 (United States and Canada) or 404-636-8400 (worldwide), fax 404-321-5478, or visit www.techstreet.com/ashrae/subgroups/34769.

Publication date: 6/17/2013

Want more HVAC industry news and information? Join The NEWS on Facebook, Twitter, and LinkedIn today!

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

2014 MCAA Annual Convention

Scenes from the 2014 MCAA Annual Convention in Scottsdale, Ariz.

Podcasts

Kyle Gargaro, editor-in-chief of The NEWS, hosted the 2014 ACCA CEO Forum. At the event, six well-known, highly respected company executives, Gary Michel, Ingersoll Rand/Trane; Chris Nelson, Carrier Corp.; Chris Peel, Rheem Mfg. Co.; Rod Rushing, Johnson Controls; Brent Schroeder, Emerson Climate Technologies; and Doug Young, Lennox; provided individual industry outlooks and fielded questions directly from attending contractors. Listen to the entire event on the NEWSMakers podcast. Posted on April 14.

More Podcasts

THE MAGAZINE

ACHRNEWS

NEWS 04-14-14 cover

2014 April 14

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe

SERVICE CALLS POLL

Which statement on service calls best applies to your business?
View Results Poll Archive

HVACR INDUSTRY STORE

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

 

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

DON'T MISS A THING

Magazine image
 
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

STAY CONNECTED

facebook icontwitter iconyoutube iconLinkedIn i con