HVAC Residential Market / HVAC Commercial Market

Finding New Ways to Deal With Moisture

dealing with moistureThe problem of unwanted moisture in HVACR systems has been an industry evil for years. How to deal with that evil is resulting in a widening range of solutions. To the familiar approaches of using filter driers, nitrogen purges, and multiple evacuations, manufacturers are adding use of sealants as well as dehydrating and activating agents.

It is an important development as the industry more and more embraces HFC refrigerants in light of the phaseout of HCFCs. HFC refrigerant systems use polyolester oils which are said to have a greater ability to retain moisture than HCFC refrigerants that ran with mineral oils.

Someone with first-hand knowledge of the challenge is Aaron York of York Quality Air of Indianapolis. “Too many of us are only concerned about moisture when it freezes out in our metering devices and blocks, or at least impedes, the flow of refrigerant.

“While this is very bad, much more damage is done when the water does not block the flow of refrigerant. In that condition, the damage is done with the interaction of refrigerants and the moisture in the presence of heat generated in the compressor motor windings, by friction in the compressor, etc. Moisture with refrigerants combine to form hydrochloric and hydrofluoric acids, which attacks all of the metal parts of the system and eats away the insulation on the motor windings. This causes motor burnouts and metal component failures in the compressor which must then be replaced. After the failure, extensive measures must be taken to ensure that all moisture and acids have been removed to avoid subsequent failures.”

“It is much less expensive to ensure that systems are clean and dry, and kept that way,” George ‘Butch’ Welsch of Welsch Heating & Cooling Co. of St. Louis, agreed. “Moisture can cause corrosion in the system and moisture that comes into contact with refrigerant oils in the refrigerant can actually create fine globules. This effect is called ‘sludging’ and can greatly reduce the oils, lubricating ability while also clogging fine strainers, expansion devices, and capillary tubes.”

Sealant

Someone else also concerned is Paul Appler, director of research for Cliplight Mfg., who recently wrote an extended paper on the topic and detailed some of the newer solutions related to use of the sealants. “The relationship between high performance air conditioning and refrigeration sealants and moisture is similar to a dysfunctional marriage. AC/R leak sealants can’t live with moisture and they can’t live without moisture.”

His solution, he said, is “particle-free and organosilane-based to seal multiple leaks against high operating pressures on a long-term basis. They need moisture to cause the necessary chemical reaction to solidify and create a long-lasting, strong bond around a refrigerant leak hole. That moisture doesn’t come from within the system however, but rather outside the system. The escaping cold refrigerant gas lowers the ambient air’s dew point near the hole and causes moisture to condense. These water droplets react with the sealant composition to form a solid chemical weld over the leak point.”

In noting his company makes such products under the SuperSeal brand, he said, “Left untreated, moisture can affect the valve plate in reciprocating models, or in low-lying areas of the condenser. Therefore, eliminating moisture has been a top priority preparation for applying sealants.”

Publication date: 9/17/2012

Did you enjoy this article? Click here to subscribe to The NEWS Magazine

Recent Articles by Peter Powell

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

2014 Energy Efficiency Forum

Highlights from the 25th annual Energy Efficiency Forum in Washington, D.C.

Podcasts

NEWSMakers: Mark Satterfield

Mark Satterfield, founder and CEO of Gentle Rain Marketing Inc. and author of “The One Week Marketing Plan” talks about his book and the importance of HVAC blogging. Posted on Sept. 19.

More Podcasts

ACHRNEWS

NEWS 09-22-14 cover

2014 September 22

Check out the weekly edition of The NEWS today!

Table Of Contents Subscribe

Venting R-22

The NEWS reported that a man received prison time for venting R-22. Should EPA step up enforcement?
View Results Poll Archive

HVACR INDUSTRY STORE

plumbing-hvac.gif
2014 National Plumbing & HVAC Estimator

Every plumbing and HVAC estimator can use the cost estimates in this practical manual!

More Products

Clear Seas Research

 

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications, Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

DON'T MISS A THING

Magazine image
 
Register today for complete access to ACHRNews.com. Get full access to the latest features, Extra Edition, and more.

STAY CONNECTED

facebook icontwitter iconyoutube iconLinkedIn i con