It’s time again for the annual Cooling Showcase. For those who are unfamiliar withThe NEWS’annual showcase, it has traditionally introduced the latest air conditioning units available for the upcoming summer season. The intent is to help contractors prepare for this busy period by doing the research that will help them to distinguish between brands.
The Cooling Showcase is split into two parts – commercial and residential. In this issue, we will focus on the commercial side of the air conditioning industry, while our April 11 issue highlighted new offerings in the residential cooling market. Included in the coverage is feature-specific information about each individual product as submitted by the manufacturers.
This showcase coverage consists of the 2011 Commercial Cooling Showcase product grid (see PDF link at the bottom of this article), which includes technical facts, such as unit tonnage, refrigerant type, efficiency rating, and cooling capacity. The photo feature below provides more in-depth information on the features of each individual unit and also includes technical support information from the manufacturer.
The manufacturers provided all of the data included in the product grid, as well as in the photo feature. Therefore, any questions should be directed to them via the contact information provided in the photo feature section.
AAON
Model:LL Series chiller and outdoor mechanical room with boilers and pumping packagesFootprint (inches):Varies (length) by 142 (width) by 102 (height)
Serviceability features:Controls, compressors, evaporator, boiler, pumps, and water system accessed through lighted, walk-in cabinet that shields components and service personnel from outdoor elements. Factory-engineered and -installed chiller, boiler, and pumping packages eliminate field installation requirements. Factory-installed evaporative-cooled condenser water loop eliminates the need for field installation of cooling tower and corresponding water loop.
Technical support:Contact local representative.
Technical support materials:Installation, operation, and maintenance manual; laminated color-coded wiring diagram; and run test report shipped within the service compartment of every unit. Parts available online (www.aaonparts.com).
Noise-reduction features:Variable-speed condenser fans reduce radiated sound. High-efficiency pumps operate quietly. Two-inch, double-wall, rigid polyurethane foam panel construction dampens compressor and pump sound.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Variable-capacity scroll compressors, variable-capacity oil-free magnetic bearing centrifugal compressors, high-efficiency air-cooled or evaporative-cooled condensers, conventional and high-efficiency boilers, and VFD-controlled variable-flow pumps provide energy savings and consistent leaving water temperature control. Water-saving desuperheater in evaporative-cooled condenser uses 22-100 percent less water when compared with conventional evaporative-cooled condensers.
Warranty information:Standard one-year material and workmanship defect. Optional five-year nonprorated compressor.
Special installation requirements:Factory-installed options available.
Contact:AAON, 918-583-2266; www.aaon.com.
eProduct 160
Footprint (inches):82 (length) by 44 (width) by 45 (height)
Serviceability features:Controls and compressor contained within a single compartment, isolated from the airstream for ease of service. Access doors make the unit serviceable; full-length stainless steel piano hinges and quarter-turn lockable handles improve reliability and entry over screwed-on access panels, said the company. Labeled electrical components and color-coded wiring match the unit’s specific color-coded wiring diagram (inside the control compartment for troubleshooting and service).
Technical support:Contact local representative.
Technical support materials:Installation, operation-maintenance manual, laminated color-coded wiring diagram, and run test report provided within the service compartment. Parts available online (www.aaonparts.com).
Noise-reduction features:Rubber isolation mounts on supply fan minimize vibrations. Direct-driven fans eliminate belt noise/slippage. Isolated controls and compressor compartment prevents compressor sound from entering the airstream. Two-inch, double-wall, rigid polyurethane foam panel cabinet construction provides additional resonated sound dampening.
IAQ equipment supported:Filter options include pleated, metal mesh, and replaceable media. Prefilters available to extend the life of more expensive downstream high-MERV filters. MERV 7-14 filters available. UV light racks available factory installed. Units capable of 100 percent outside air operation for improved IAQ. Various humidity control options are available.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Variable-capacity (10-100 percent) compressors offer temperature and humidity control and energy savings at part load. Double-wall foam cabinet, with a thermal resistivity of R-13, provides energy savings. Direct-driven fans eliminate the energy losses and noise caused by belts.
Warranty information:Two years from date of original shipment from the factory; five-year nonprorated compressor; 15-year nonprorated aluminized steel gas heater warranty; 25-year nonprorated stainless steel gas heater warranty.
Special installation requirements:Factory-installed options available.
Contact:AAON, 918-583-2266; www.aaon.com.
eProduct 161
Allied Commercial
Model:KCA300S4BN electric rooftopFootprint (inches):133 (length) by 92 (width) by 55 (height)
Serviceability features:Common parts; color-coded and continuously marked wiring; large access panels; plastic drain pans; thermal expansion valve with removable element. Compressors located near perimeter of unit for access. Compressors isolated from condenser airflow, allowing system operation checks to be done without changing the airflow across the outdoor coils. Positive-connection electrical plugs connect to common accessories or maintenance parts for removal or installation. Slab condenser coils facilitate cleaning.
Technical support:Available at 800-448-5872.
Technical support materials:Technical spec sheets, installation instructions.
Noise-reduction features:All panels adjacent to conditioned air are fully insulated. Unit base fully insulated.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Dependability, quick replacement, ISO-9001-certified factory, 100 percent factory tested.
Warranty information:Five-year limited compressor, one-year limited remaining components, 10-year limited aluminum heat exchanger, 15-year limited stainless steel heat exchanger.
Special installation requirements:Manufacturer did not specify.
Contact:Allied Air Enterprises, 803-738-4060; www.allied-commercial.com.
eProduct 162
Arcoaire
Model:RAS072 package air conditionerFootprint (inches):74 (length) by 46 (width) by 41 (height)
Serviceability features:Units feature through-the-base utility connections capability. All connections and troubleshooting points located in the master terminal board. Designed to allow condenser pressure readings with panels on. Access panels feature easier-grip handles and no-strip screws.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets and installation-operation manuals.
Noise-reduction features:Quiet and efficient operation provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters; optional economizer accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation capability.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Unit features field-convertible airflow, high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Fixed-orifice metering devices on all models control refrigerant flow. Refrigerant circuits contain a liquid line filter-drier to trap dirt and moisture. Factory-installed medium- and high-static indoor fan option.
Warranty information:Five-year limited compressor, one-year limited all other parts.
Special installation requirements:Optional accessory field-installed electric heaters available in multiple kW sizes and voltages.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.goarcoaire.com.
eProduct 163
Footprint (inches):88 (length) by 60 (width) by 41-49 (height)
Serviceability features:Units feature through-the-base utility connections capability. All connections and troubleshooting points located in one place, the master terminal board. Access panels feature easier-grip handles and no-strip screws. IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted at the dealer website includes spec sheets, installation-operation manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation capability (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Units feature field convertible airflow, high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium and low), medium and high-static indoor fan option. Other market-driven options include liquid propane/high-altitude kits.
Warranty information:Fifteen-year limited optional stainless steel heat exchanger; 10-year limited aluminized stainless steel heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.goarcoaire.com.
eProduct 164
Aztec
Model:ASC indirect evaporative cooling rooftopFootprint (inches):360 (length) by 123 (width) by 125 (height)
Serviceability features:DDC with monitoring capability, full-sized hinged access doors to all key components, automated cooling tower fill and drain system, low-maintenance fiberglass media option, plug-and-play installation.
Technical support:In addition to local rep support, factory technical service is available at 214-819-6010, 7:30-4:30 p.m. Central, Monday-Friday.
Technical support materials:Available technical support includes wiring diagrams, IOM documents, factory-generated submittal drawings per configuration, and purchased parts list online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Upgraded filters; can be completely lined with stainless steel.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Manufacturer did not specify.
Additional features:Integral cooling tower incorporated with the base unit, eliminating the need for a remote tower. The unit is also available with a completely welded floor pan, making it suitable for applications such as data centers, where water on the roof can be a concern.
Warranty information:Standard one-year parts.
Special installation requirements:Manufacturer did not specify.
Contact:Mike Kaler, 214-819-5243; www.mestex.com.
eProduct 165
Bard
Model:Q-Tec QWS Series step-capacity geothermal package heat pumpFootprint (inches):20 (length) by 43-49 (width) by 90 (height)
Serviceability features:Step-capacity scroll compressor, variable-speed ECM blower motor, and a cupronickel water coil help deliver high energy efficiencies. Hinged, lockable service door provides access to air filters and primary electrical controls. Optional vinyl-coated steel cabinet affords resistance against scratching, heavy-duty rollers provide easier installation and service when needed. Versatile design allows unit to be connected to a boiler/tower, central well field, or individual ground loop.
Technical support:Available through local distribution network.
Technical support materials:Service parts guides, wiring diagrams, installation manuals (printed and digital), website.
Noise-reduction features:Quiet Technology delivers lower operating sound levels than standard units. Patented acoustical sound accessories can be added for lower operating sound levels as requirements and budgets dictate. Also, variable-speed ECM provides low sound levels and soft-start capabilities. Fully insulated cabinet with foil-covered, high-density fiberglass insulation with sealed-edge treatment.
IAQ equipment supported:Ventilation packages include commercial room ventilators and energy-recovery ventilators that allow 450 cfm of fresh air, providing the flexibility required to meet a variety of engineered specs.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Part of the line of classroom climate control equipment. Designed to provide heating, cooling, dehumidification, and ventilation while utilizing “nature’s most efficient solar energy collector: ground water,” said the company.
Warranty information:Five-year parts and compressor standard.
Special installation requirements:None.
Contact:Bard Manufacturing Co., 419-636-1194; www.bardhvac.com.
eProduct 166
Footprint (inches):17-22 (length) by 38-42 (width) by 70-94 (height)
Serviceability features:Digital scroll compressor capable of continuously modulating capacity from 100 percent down to 20 percent. Dual 60/50-Hz frequency rated, and outdoor operating range from -40 to 131°F.
Technical support:Available through local distribution network.
Technical support materials:Service parts guides, wiring diagrams, installation manuals (printed and digital), website.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Barometric fresh air damper is standard.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:This variable-capacity design is appropriate for applications where extreme-duty conditions exist and continuous-run operation is needed. All ECUs are dual 60/50-Hz-frequency rated, suitable for use anywhere within the specified operation voltage range. It can be used on structures that can be located or relocated on demand to anywhere in the world without modifications, making it suitable for critical mission, worldwide installations.
Warranty information:Five-year compressor, one-year parts (may vary depending on installation).
Special installation requirements:All units include a digital thermostat controller.
Contact:Bard Manufacturing Co., 419-636-1194; www.bardhvac.com.
eProduct 167
Bryant Heating & Cooling
Model:580J/558J/548J Legacy Series constant volume rooftopFootprint (inches):74 (length) by 45 (width) by 33 (height)
Serviceability features:Designed to be easier to order, install, and maintain. Units throughout the line are similar in design for familiarization. Each unit has a large, organized control box; standardized components; a central control command center that centralizes wiring into one location; handled, easier-access panels; No-Strip screw technology; and a removable service plug to simplify taking refrigerant pressures.
Technical support:Supported by local reps.
Technical support materials:Product data, wiring diagrams; service, controls, and commissioning manual; installation instructions; critical parts lists.
Noise-reduction features:Insulated cabinet, prop condenser fans, and isolated scroll compressors.
IAQ equipment supported:Economizers with multiple sensor options, 2-inch filters (standard), multiple fan performance capabilities.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Complete offering in sizes, operation, and options makes it a solution for the replacement market. Many models capable of fitting on past Bryant roof curbs (dating back to the late 1980s) without changing utility or duct connections.
Warranty information:Five-year compressor and electric heat, 10/15 gas heat exchanger, one-year parts, plus many optional extended warranties.
Special installation requirements:None.
Contact:Bryant Heating & Cooling; www.bryant.com.
eProduct 168
Carrier
Model:48/50 P WeatherMaster Series constant and vav package rooftopFootprint (inches):257 (length) by 95 (width) by 78 (height)
Serviceability features:Equipped with large, man-sized access doors, simplified wiring connections, and plug-and-play communication options. The factory-installed DDC system includes an easier-to-use human interface that provides access to system operating parameters. Due to its feature flexibility, this is truly an “applied system in a box,” said the company.
Technical support:Contact local expert or 800-227-7437 (800-CARRIER).
Technical support materials:Selection software programs plus product data, wiring diagrams; service, controls, and commissioning manual; installation instructions; and critical parts lists. Carrier University provides training.
Noise-reduction features:Insulated cabinet with isolated compressors and fans. Low-sound option available factory installed.
IAQ equipment supported:Economizers with multiple sensing capabilities, high-intensity UVC lights, and a variety of filter types (e.g., pleated, bag, and cartridge). Capability to integrate CO2 sensors for optimum demand control ventilation logic and operation. The standard insulation contains an EPA-registered antimicrobial agent that resists the growth of bacteria. Double-wall construction with AgIon interior is available.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The design allows for enhanced matching of the cooling effect of the equipment to the needs of the space through the use of extensive compressor staging capability. Control system capabilities include precise supply air temperature control for constant and variable air volume applications. In addition, HumidiMiZer, an adaptive dehumidification system, controls supply air humidity levels.
Warranty information:Standard commercial warranty; extended programs available.
Special installation requirements:None.
Contact:Carrier Corp.; www.carrier.com
eProduct 169
Footprint (inches):74 (length) by 47 (width) by 33 (height)
Serviceability features:Designed with contractor input; comes with a large, organized control box; standardized components; optional hinged access panels; a central control terminal board that centralizes wiring/service points into one location; handled, easier-access panels; No-Strip screw technology; and a service plug to take refrigerant pressure readings.
Technical support:Contact local expert or 800-227-7437 (800-CARRIER).
Technical support materials:Selection and analytical software tools; product data, wiring diagrams; service, controls, and commissioning manual; installation instructions; critical parts lists. Carrier University provides training.
Noise-reduction features:Insulated cabinet with isolated scroll compressors and ridged base rail design.
IAQ equipment supported:Economizers with multiple sensing capabilities, high-intensity UVC lights, and 2- and 4-inch filters on larger models; capability for CO2 sensors and demand control ventilation logic, plus patented HumidiMiZer adaptive dehumidification for humidity control.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Uses the same footprint model from units designed in 1989; at that time SEER level was 9.3, now it’s up to 15.8 in the same footprint. Units also operate in up to 125°F ambient temperatures.
Warranty information:Standard commercial warranty; extended programs available.
Special installation requirements:None; accumulators factory-installed on all heat pump models.
Contact:Carrier Corp.; www.carrier.com.
eProduct 170
Century
Model:EKTC-2G Series for 265-v package terminal air conditionerFootprint (inches):22 (length) by 42 (width) by 16 (height)
Serviceability features:An onboard computer uses real-time diagnostics to prolong the life of the unit and simplify service; LED indicator flashes error codes, and in many instances, the unit automatically clears the fault condition. Condenser shroud can be removed for service, and a slide-out chassis makes components accessible. Front panel can be removed to access dipswitches that set options such as front desk control, setpoint limiting, in-room thermostat control, and more.
Technical support:Available at 517-787-2100 weekdays, 8 a.m.-5 p.m. Eastern. Sales reps throughout the U.S. and Canada can also provide assistance.
Technical support materials:Comprehensive installation, operation, and maintenance manual with troubleshooting instructions; a service manual with troubleshooting tips and wiring diagrams; and a complete parts list can all be viewed or downloaded from the website, or emailed upon request.
Noise-reduction features:Tangential blower wheel design provides uniform air discharge for quieter operation; two fan motors for indoor sound reduction.
IAQ equipment supported:Two-piece filter design improves air filtration; filters can be easily removed for cleaning. A fresh-air control arm allows outdoor air into the room through a vent filter.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Electric heat is standard; 2, 3, or 5 kW determined by power cord selection. Disposes of its own condensate by atomizing moisture. Can be controlled by remote or in-room thermostat. Features electronic temperature limiter, interface for front desk control, and more. Can be optimized to specific application through the use of dipswitches; 265-1-60 power.
Warranty information:One-year parts and labor, five-year sealed system and functional parts; some limitations apply. See printed warranty on the website or packed with unit.
Special installation requirements:Fits most standard wall sleeves, making unit appropriate for replacements. For sleeve retrofits, ensure foam seals provide a good barrier between the grille and the outdoor coil tube sheets, to prevent recirculation of exhausted air.
Contact:Heat Controller, Inc., 517-787-2100; www.century-hvac.com.
eProduct 171
Footprint (inches):34-54 (length) by 19-24 (width) by 11-21 (height)
Serviceability features:Components can be accessed from multiple sides; removable blower inlet rings allow easier access to the fan and motor; safety features that protect the unit include a fault lockout that prevents compressor operation. Microprocessor controls monitor key system points and feature easier-to-understand diagnostics; performance-monitoring system signals a potential problem before lockout can occur, so service can be scheduled.
Technical support:Available at 517-787-2100 weekdays, 8 a.m.-5 p.m. Eastern. Sales reps throughout the U.S. and Canada can provide assistance; classes offered at company headquarters and other U.S. cities (fee charged for two-day training).
Technical support materials:Technical documentation includes engineering design guide with performance data, antifreeze correction chart, and wiring diagrams; installation, operation, and maintenance manual provides a broad range of information, including troubleshooting. These can be viewed or downloaded from the website, or emailed upon request. For parts information, contact Customer Service at 517-787-2100.
Noise-reduction features:Sound-absorbing glass fiber insulation, plus insulated divider separating the compressor and air handler compartments, contributes to quieter operation. Dual-grommet isolation mounting system for the compressor, and flexible torsion motor mount, reduce vibration and related noise. Discharge muffler reduces inherent compressor pulse noise.
IAQ equipment supported:Large, disposable filters are 1-inch glass fiber type in standard sizes.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Each unit can be independently operated year-round in heating or cooling mode. Among the smallest cabinet sizes in the industry, units are compatible with numerous older models as appropriate replacements. Extended-range refrigerant circuit offers ground-loop as well as water-loop installation. Scroll compressors in 2-ton and larger models, rotary in 1.5 ton and smaller. Performance monitoring system.
Warranty information:Five-year compressor, one-year parts; some limitations apply, see printed warranty on website or packed with unit. AssurancePlus extended service agreements available; contact representative for details.
Special installation requirements:Units can be ordered in a variety of configurations, with options for supply air, return, and heat exchanger material. Also available in a wide range of 60-Hz voltages. Features field-convertible discharge; factory-installed hanger brackets included.
Contact:Heat Controller Inc., 517-787-2100; www.century-hvac.com.
eProduct 172
ClimaCool
Model:SHC onDEMAND simultaneous heating and cooling heat pumpFootprint (inches):67 (length) by 34 (width) by 84 (height)
Serviceability features:Modules are fully serviceable and maintainable without removal from the chiller bank or disassembly of headers. All major components such as compressors, brazed-plate heat exchangers, refrigeration components, and Pete’s ports, are accessible.
Technical support:Onsite operator training upon startup. For further information on startup, installation and servicing, call 405-745-3185 or visit website.
Technical support materials:Manual with installation, startup, and maintenance schedule sent with every unit. Wiring diagrams are attached to the control panel’s access door. Visit website for technical support literature.
Noise-reduction features:Compressors installed on rubber isolators; sound attenuation panels made of 18-gauge galvanized steel with powder-coat paint finish and fiberglass insulation standard. Isolation of the chiller from the structure is possible by installing vibration-eliminating springs or pads under base rails.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The design helps save space and reduce costs while contributing to six LEED categories. Piping connections are fully configurable to same or opposite ends. Each module can be indexed for heating or cooling regardless of its position in the bank.
Warranty information:Standard one-year parts; optional four-year extended parts-only compressor warranty.
Special installation requirements:None.
Contact:ClimaCool Corp., 407-951-5513; www.climacoolcorp.com.
eProduct 173
Footprint (inches):84 (length) by 40 (width) by 84 (height)
Serviceability features:Design allows easier access to major components from the front and top of each unit. Modules are fully serviceable and maintainable without removal from the chiller bank or disassembly of headers. CoolLogic control allows building automation system integration using BACnet®, Modbus, LonTalk®, or N2 communication protocol options.
Technical support:Onsite operator training upon startup. For further information on startup, installation, and servicing, call 405-745-3185 or visit website.
Technical support materials:Manual with installation, startup, and maintenance schedule sent with every unit. Wiring diagrams attached to the control panel’s access doors. Visit website for technical support literature (product catalogs, installation, operation and maintenance manuals, sales brochures, wiring diagrams, etc.).
Noise-reduction features:Acoustical design provides low operating noise levels using rigid cast aluminum fan blades with winglets that lower sound pressure and minimize air turbulence. Compressors mounted on rubber isolators for further noise reduction.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:High-efficiency design offers a minimum of 10 EER at full load with low operating noise levels and compact footprint to promote space savings, easier installation, and placement flexibility. Modular design allows redundancy and incremental capacity from 20 to 360 tons.
Warranty information:Standard one-year parts; optional four-year extended parts-only compressor warranty.
Special installation requirements:None.
Contact:ClimaCool Corp., 407-951-5513; www.climacoolcorp.com.
eProduct 174
ClimateMaster
Model:Tranquility high-efficiency (TR) horizontal or vertical package heat pumpFootprint (inches):53 (length) by 22 (width) by 21 (height)
Serviceability features:Easier-access control box contains advanced digital controls with Remote Service Sentinel. Easier-to-remove blower housing for quick service. Easier service access from multiple sides. Multiple access panels for installation and service ease. Remote reset at thermostat.
Technical support:Available at 405-745-6000.
Technical support materials:All wiring diagrams, installation instructions, and submittals available online.
Noise-reduction features:Sound-absorbing glass fiber insulation. Double-isolation compressor mounting for quieter operation. Scroll compressors (size 018 and above). Flexible-mount blower motors (size 006-042). UltraQuiet (mute) package is available.
IAQ equipment supported:Epoxy powder painted or stainless steel condensate drain pans. MERV 11 or 13 filters. Optional ClimaDry modulating dehumidification mode.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Offers high-efficiency performance in a simple cabinet design, plus options that allow for application flexibility. Additional options include ClimaDry dehumidification, hot-water generator, coated air coils, UltraQuiet package, secondary circulating pump, motorized water valve, automatic water flow valves, and high-static blowers.
Warranty information:Standard limited express is available with coverage of 18 months from the time of shipment or 12 months from startup, whichever comes first. Optional warranties include four-year control board, four-year compressor, and four-year refrigerant.
Special installation requirements:Manufacturer did not specify.
Contact:ClimateMaster; www.climatemaster.com.
eProduct 175
Footprint (inches):90 (length) by 49 (width) by 45 (height)
Serviceability features:Hinged access doors with latches. Slide-out blower assembly with variable-pitch sheaves. Microprocessor controls standard with eight safeties.
Technical support:Available at 405-745-6000.
Technical support materials:All wire diagrams, installation instructions, and submittals available online.
Noise-reduction features:Comes equipped with double-isolation compressor mounting with vibration isolation for quieter operation. Refrigeration circuit has compressor discharge mufflers.
IAQ equipment supported:ERV option handles up to 100 percent outside air. MERV 13 filters also available. Optional ClimaDry modulating dehumidification mode.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Exceeds ASHRAE 90.1 efficiencies, which is 40 percent better than standard rooftop units. Optional ClimaDry modulating dehumidification mode.
Warranty information:Standard limited express is available with coverage of 18 months from the time of shipment or 12 months from startup, whichever comes first. Optional warranties include four-year control board, four-year compressor, and four-year refrigerant.
Special installation requirements:Manufacturer did not specify.
Contact:ClimateMaster, 405-745-6000; www.climatemaster.com.
eProduct 176
Comfort-Aire
Model:HBH Commercial Series water-source heat pumpFootprint (inches):85 (length) by 36 (width) by 22 (height)
Serviceability features:Panels are removable so components can be accessed from multiple sides. Removable blower inlet rings allow easier access to the fan and motor. Microprocessor controls feature easier-to-understand diagnostics, and the performance monitoring system signals potential problems, so service can be scheduled rather than emergency.
Technical support:Available at 517-787-2100 weekdays, 8 a.m.-5 p.m. Eastern. Sales reps throughout the U.S. and Canada can also provide assistance (see website under “where to buy”).
Technical support materials:Comprehensive installation, operation, and maintenance manual with troubleshooting instructions and startup/checking procedures. Engineering design guide includes specs, performance data, antifreeze correction charts, and wiring diagrams. These can be viewed or downloaded from the website, or emailed upon request. For parts information, contact Customer Service at 517-787-2100.
Noise-reduction features:Dual-grommet compressor isolation mounting reduces vibration and associated noise; flexible torsion motor mounting further reduces vibration. Compressor and air handler compartments are separated by an insulated divider; the blower housing is covered in noise-suppression material. Also, a discharge muffler reduces inherent compressor pulse noise.
IAQ equipment supported:Large, disposable filters are 1-inch glass fiber type in standard sizes.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Designed for water-loop systems, extended operating range allows ground-water and ground-loop installation (with insulation kit). Two refrigerant circuits and dual scroll compressors operate independently for temperature control. Microprocessor controls monitor key system points; coated air coil prolongs equipment life. Available in several 60-Hz voltages, with numerous options to meet building design requirements.
Warranty information:Five-year compressor and one-year parts; some limitations apply, see printed warranty on website or packed with unit for details. AssurancePlus extended service agreements available; contact rep for details.
Special installation requirements:Field connections for supply, return, and condensate can be made on either side. Hanger brackets come factory installed. For units suspended above a ceiling or inside a soffit, four threaded rods are required.
Contact:Heat Controller Inc., 517-787-2100; www.comfort-aire.com.
eProduct 177
Footprint (inches):31 (length) by 31 (width) by 27-35 (height)
Serviceability features:All controls housed in a waterproof box on the side of the unit, with service ports for suction and liquid located just below it. Top-discharge grille can be removed for access to fan assembly components.
Technical support:Available at 517-787-2100 weekdays, 8 a.m.-5 p.m. Eastern. Sales reps throughout the U.S. and Canada can also provide assistance (see website under “where to buy”).
Technical support materials:Installation, operation, and maintenance manual with troubleshooting instructions and wiring diagrams; complete parts list also available. These can be viewed or downloaded from the website, or emailed upon request.
Noise-reduction features:A muffler on the compressor discharge dampens operating sound; also, the heavy-duty motor mount and grille were designed to reduce vibration and related sound, while the top air discharge directs exhaust up and away from the residence.
IAQ equipment supported:IAQ is provided by the air handler, furnace, and/or air cleaner installed in conjunction with the condenser.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:208-V/230-V, three-phase, 60-Hz power supply; 460-V, three-phase, 60-Hz model available in 5 tons only; designed specifically for commercial applications. Louvered, metal jacket protects coil from weather and yard hazards while maintaining an attractive appearance. Cabinet is painted to withstand harsh weather. Long-life copper coils with enhanced aluminum fins provide maximum heat exchange. Scroll compressor features advanced technology for efficiency, long life.
Warranty information:Five-year compressor, one-year parts; some limitations apply, see printed warranty on website or packed with unit for details. Extended service agreements available; contact a company rep.
Special installation requirements:Proper sizing is critical to achieve optimal performance. To prevent noise transmission, the mounting pad should not be connected to the structure. Unit should be located away from water run-off and roof drip line.
Contact:Heat Controller Inc., 517-787-2100; www.comfort-aire.com.
eProduct 178
Comfortmaker
Model:PDS3 package dual fuel heat pumpFootprint (inches):48 (length) by 33-44 (width) by 42-50 (height)
Serviceability features:Installs on rooftop or ground level. Three-panel access for maintenance and installation. Converts to down-discharge applications.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation-operation manuals.
Noise-reduction features:Outdoor fan sized and optimized for minimal noise.
IAQ equipment supported:Accessory filter racks support 2-inch filters.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Combination gas heating, heat pump heating, and electric cooling. Unit features stainless steel tubular heat exchanger, field-convertible airflow, high- and low-pressure switches, high-efficiency ECM indoor blower motor. Dehumidification mode (airflow reduction) on all models.
Warranty information:Ten-year limited heat exchanger, five-year limited compressor, one-year limited all other parts.
Special installation requirements:Roof curbs available as field-installed accessories.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.gocomfortmaker.com.
eProduct 179
Footprint (inches):88 (length) by 60 (width) by 41-49 (height)
Serviceability features:All connections and troubleshooting points located in one place, the master terminal board. Units feature through-the-base utility connections capability. Access panels feature easier-grip handles and no-strip screws. Designed to allow accurate readings of condenser pressure with panels on.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation, and operation manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor. Accessory duct-mounted CO2 sensor available for field installation to provide demand control ventilation (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Units feature field-convertible airflow, high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Refrigerant circuits contain a liquid line filter-drier to trap dirt and moisture. Factory-installed options include medium- and high-static indoor fan option.
Warranty information:Five-year limited compressor, one-year limited all other parts.
Special installation requirements:Optional field-installed electric heater accessory available in multiple kW sizes and voltages.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.gocomfortmaker.com.
eProduct 180
Daikin AC
Model:Round-Flow Cassette FXFQ_PVJU indoor fan coil unit for use in VRV systemFootprint (inches):11 (length) by 33 (width) by 33 (height)
Serviceability features:Built-in self-diagnostics, compact and lightweight, comes with washable filter.
Technical support:Available at 866-432-4546 (866-4DAIKIN), Monday-Friday, 8 a.m.-5:30 p.m. For more information, visit website.
Technical support materials:Service manual, engineering data book, installation manual, submittal data sheets, parts lists, and guide specs.
Noise-reduction features:The unit features a hollow, serrated-design turbo fan, combined with a new, high-efficiency fan motor to improve performance and reduce sound levels to as low as 27 dBa.
IAQ equipment supported:Drain pan is coated with an antibacterial agent containing silver ions, which restricts growth of slime, mold, and bacteria. The process also reduces odors at the start of operation, and drain pan clogging during the entire life of the unit. Air filters also treated with an antibacterial agent, which essentially doubles the antimold, antibacterial processes. MERV 8 and 13 disposable filters available.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The unit is designed to provide 360-degree airflow, and reduce drafts, temperature fluctuations, and air velocity. The 3- by 3-ft fan coil units can be combined with the VRVIII-S, VRVIII, or VRV-WIII. The design provides quieter operation by reducing wind velocity. It offers powerful cooling and heating capacities and better air distribution, the company says. Built-in condensate pump eliminates the need for purchasing one locally at the time of installation. Easier installation due to overall weight reduction.
Warranty information:Standard limited one-year labor, one-year parts, six-year compressor.
Special installation requirements:R-410A certification; factory training is standard. Manufacturer’s installation instructions, service space, and piping limitations must be followed as described in the engineering data book.
Contact:Daikin AC, 214-245-1510; www.daikinac.com.
eProduct 181
Day & Night
Model:CHS180-240 split system heat pumpFootprint (inches):86 (length) by 45-67 (width) by 50 (height)
Serviceability features:Comfort Alert® troubleshooting LED fault indicators diagnose system-related malfunctions. Newly designed terminal board facilitates safety circuit troubleshooting and simplifies the control box arrangement.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation-operation manuals.
Noise-reduction features:Units are equipped with Scroll compressors and include vibration isolation for even quieter operation. Suction line accumulators smooth out refrigerant management during mild ambient conditions and the transitions during defrost operation, to eliminate sounds associated with the compressors pumping liquid refrigerant.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:All models use round copper tube, aluminum plate fin condenser coils (RTPF). Compressors include overload protection. All units have high-pressure and loss-of-charge protection. Models with optional low-ambient control provide cooling operation down to -20°F.
Warranty information:Five-year limited compressor; one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.godayandnight.com.
eProduct 182
Footprint (inches):88 (length) by 60 (width) by 49 (height)
Serviceability features:All connections and troubleshooting points located in one place, the easier-access master terminal board. Units feature through-the-base utility connections capability. Access panels feature easier-grip handles and no-strip screws. Designed to allow accurate readings of condenser pressure with panels on.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation and operation manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation, to provide demand control ventilation capability (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Units feature field-convertible airflow, high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Refrigerant circuits contain a liquid line filter-drier to trap dirt and moisture. Factory-installed options available, including medium- and high-static indoor fan option.
Warranty information:Five-year limited compressor; one-year limited all other parts.
Special installation requirements:Optional field-installed electric heaters available in multiple kW sizes and voltages.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.godayandnight.com.
eProduct 183
Emerson Network Power
Model:SmartRow self-contained unitFootprint (inches):Varies
Serviceability features:Liebert iCOM controls feature service history and unit-specific parts list. The solution features single side service access.
Technical support:Available 24/7 inside the U.S. at 800-222-5877; outside the U.S. at 614-841-6755.
Technical support materials:Submittal drawings, installation, operation and maintenance manual, guide specs, technical data manual, warranty information.
Noise-reduction features:Sound-deadening insulation, compressor jacket.
IAQ equipment supported:None, but the unit has a closed system design.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:This standalone data center infrastructure supports up to 20 kW of IT equipment in an enclosed, multi-rack configuration with integrated power, cooling, infrastructure management, and fire suppression. By reducing room modifications required to support IT equipment, it can reduce initial capital costs about 10 percent and cut ongoing energy costs up to 30 percent.
Warranty information:Standard one year and extensions available. Longer periods for specific components.
Special installation requirements:Room-neutral design allows this system to be placed virtually anywhere, even in environments where people are working. It is a solution for spaces not designed to be IT environments. Integrated fire suppression and panel power distribution included.
Contact:Emerson Network Power, 800-877-9222; www.emersonnetworkpower.com.
eProduct 184
First Co.
Model:HydroTech WSH/WSV Series water-source heat pumpFootprint (inches):21 (length) by 21 (width) by 36 (height)
Serviceability features:Digital control module features two-digit fault codes for simplified fault identification. All cabinet side panels can be removed for access to internal components.
Technical support:Available at 214-388-5751 Monday-Friday, 8 a.m.-5 p.m. Central.
Technical support materials:Product specs, installation manuals, brochure, and control module manuals available online.
Noise-reduction features:High-efficiency ECM motor (available on most models); Tuf-Skin RX antimicrobial cabinet insulation offers enhanced sound attenuation and insulation; insulated, heavy-duty compressor cover (field installed) available.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Manufacturer did not specify.
Additional features:Models available with PSC or high-efficiency ECM X-13 motor. Optional vacant premises control (VPC) ensures proper unit operation even during periods of extended nonoccupancy/absence.
Warranty information:Five-year compressor, one-year all parts.
Special installation requirements:Manufacturer did not specify.
Contact:First Co., 214-388-5751; www.firstco.com.
eProduct 185
Goodman
Model:CPC package air conditionerFootprint (inches):133 (length) by 88 (width) by 50 (height)
Serviceability features:Single-side accessibility. Bottom utility entry. Built-in filter rack with standard 2-inch filters (convertible to 4-inch filters). Contactor with lugs. This unit is suitable for ground-level or rooftop installations, and horizontal or downflow applications; 24-V terminal strip.
Technical support:Available from local distributor, or the factory at 888-593-9988.
Technical support materials:All technical support materials available from local distributor, from the Partner Link section of www.goodmanmfg.com, or by calling 888-593-9988.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Compatible with a variety of commercial IAQ components and systems.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Unit features high-capacity, steel-cased filter-drier, compressor crankcase heaters, heater kits with single-point entry, high- and low-pressure switches and a wide variety of factory-installed options.
Warranty information:Five-year limited parts.
Special installation requirements:In many installations, a new curb or curb adaptor may not be required, depending on the existing unit.
Contact:Goodman Global Group, Inc., 713-263-5064; www.goodmanmfg.com.
eProduct 186
Heil
Model:RGS072 package gas/electric rooftopFootprint (inches):74 (length) by 46 (width) by 41 (height)
Serviceability features:Exclusive IGC solid-state control for onboard diagnostics with LED error code designation, burner control logic and energy-saving indoor fan motor delay. Units feature through-the-base utility connections capability. Access panels feature easier-grip handles and no-strip screws. All connections and troubleshooting points located in one convenient place, the master terminal board.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation-operation manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide outdoor air for ventilation capability on demand (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Unit features field-convertible airflow. All units have high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, low), and medium- and high-static indoor fan option. Other market-driven options, such as liquid propane or high-altitude kits and flue exhaust extensions, are available.
Warranty information:Fifteen-year limited optional stainless steel heat exchanger, 10-year limited aluminized stainless steel heat exchanger, five-year limited compressor, one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.goheil.com.
eProduct 187
Footprint (inches):128-142 (length) by 86 (width) by 49 (height)
Serviceability features:Units have provisions for through-the-bottom power entry capability. All connections and troubleshooting points located in the master terminal board. Access panels feature easier-grip handles and no-strip screws. Large, laminated control wiring and power wiring drawings affixed to unit to make troubleshooting easier.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes spec sheets, installation-operation manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand-control ventilation capability (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Dedicated vertical or horizontal airflow duct configuration models. Unit features high- and low-pressure switches, freeze-protection thermostats. Scroll compressor has internal line-break overload protection. Factory-installed options includes medium- and high-static indoor fan option.
Warranty information:Five-year limited compressor; one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.goheil.com.
eProduct 188
ICP Commercial
Model:CHS180-240 split system heat pumpFootprint (inches):86 (length) by 45-67 (width) by 50 (height)
Serviceability features:Newly designed terminal board facilitates safety circuit troubleshooting and simplifies control box arrangement. Comfort Alert troubleshooting LED fault indicators diagnose system-related malfunctions.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes product spec sheets, installation-operation manuals.
Noise-reduction features:Units equipped with scroll compressors and vibration isolation for still quieter operation. Units are equipped with suction line accumulators that smooth out refrigerant management during mild ambient conditions and the transitions during defrost operation, to eliminate sounds associated with the scroll compressors pumping liquid refrigerant.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:All models use round copper tube, aluminum plate fin condenser coils (RTPF). Compressors include overload protection. All units have high-pressure and loss-of-charge protection. Models with optional low ambient control provide cooling operation down to -20°F.
Warranty information:Five-year limited compressor; one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.goicpcommercial.com.
eProduct 189
Footprint (inches):88 (length) by 60 (width) by 49 (height)
Serviceability features:IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic, and energy-saving indoor fan motor delay. All connections and troubleshooting points located in the master terminal board. Units feature through-the-base utility connections capability. Access panels feature easier-grip handles and no-strip screws.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes spec sheets, installation-operation manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation, to provide demand-control ventilation capability (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Units feature field-convertible airflow, high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Factory-installed options include three heat options (high, medium, low), medium- and high-static indoor fan option. Other market-driven options, such as liquid propane/high altitude kits, are available.
Warranty information:Fifteen-year limited, optional stainless steel heat exchanger; 10-year limited, aluminized stainless steel heat exchanger; five-year limited compressor; one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.goicpcommercial.com.
eProduct 190
IEC
Model:Horizontal, Hi-Performance, and Belt Drive Series fan coil and blower coil units for seismic applicationFootprint (inches):Manufacturer did not specify.
Serviceability features:All internal components accessible. Removable motor or motor/blower assembly, removable drain pan in galvanized and stainless steel, easier filter removal from multiple sides, and cleanable insulation options.
Technical support:Available at 800-226-5406, 8 a.m.-5 p.m. Central.
Technical support materials:See website for all technical support materials (catalogs, installation-operation manuals, sales brochures, wiring diagrams, mechanical specs, submittal drawings, and replacement parts list).
Noise-reduction features:A variety of insulation types and densities, multispeed and variable-speed motors and heavy-gauge cabinet options. The series is available with double-wall construction, which reduces case-radiated sound in ducted applications.
IAQ equipment supported:Fresh/outside air option, cleanable insulation, removable-cleanable drain pan, antimicrobial coating option, and up to MERV 13 filtration.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:This series comes with a new structural upgrade option, and is independently tested and certified for seismic applications of nonstructural components and systems, in accordance with International Building Code (IBC) releases IBC 2000, 2003, 2006, and 2009.
Warranty information:Twelve months after startup or 18 months from shipment.
Special installation requirements:Refer to IEC-supplied installation drawings for anchor requirements and mounting considerations for seismic application. The installing contractor is responsible for observing the installation requirements detailed in the seismic installation drawings, and the proper installation of all anchors and mounting hardware.
Contact:International Environmental Corp. (IEC), 405-605-5000; www.iec-okc.com.
eProduct 191
Lennox Industries
Model:Energence® rooftop unit with SunSource® Commercial Energy SystemFootprint (inches):47 (length) by 47 (width) by 86 (height)
Serviceability features:Driven by Prodigy® control system, which verifies system operation, tracks runtime of all major components, and provides service reports via a USB port. Solar energy equipment is fully integrated with RTU; plug-and-play system is simply mounted and attached, and can accept additional solar modules at any time without system redesign. Hinged access panels and isolated compressor simplify servicing.
Technical support:Available at 800-453-6669 (800-4-LENNOX), Monday-Friday, 7:30 a.m.-5 p.m. Central.
Technical support materials:Technical documents, including engineering handbooks, application and design guidelines, guide specs, service manuals, and installation instructions are available online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Patented Humiditrol® dehumidification system option controls temperature and humidity independently for energy-efficient moisture control. MSAV supply fan with multiple cooling stages provides up to seven levels of airflow to reduce temperature swings and meet comfort needs while controlling energy usage. Foil-faced insulation and MERV 13 filters help control airborne contaminants.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:A solar energy system has been directly integrated with a commercial HVAC system for effective efficiency levels of 34 SEER and beyond. The integrated solar equipment is a solution that’s easier to install and safer to use than traditional solar systems, the company said, with no major changes to the electrical infrastructure or high-voltage dc lines.
Warranty information:Energence rooftop unit - 15-year limited stainless steel gas heat exchanger, 10-year limited aluminized gas heat exchanger, five-year limited compressor, three-year limited Prodigy unit controller, one-year limited covered components; SunSource System - five-year limited solar modules; 12-year, 90-percent limited peak power output guarantee; 25-year, 80-percent limited peak power output guarantee; 15-year standard limited microinverters.
Special installation requirements:No.
Contact:Lennox Industries; www.lennox.com.
eProduct 192
LG Electronics USA
Model:Multi V vertical air handling unit (ARNU183NJA2, ARNU243NJA2, ARNU303NJA2, ARNU363NJA2, ARNU423NKA2, ARNU483NKA2, ARNU543NKA2)Footprint (inches):22 (length) by 25 (width) by 55 (height)
Serviceability features:Pipe connections and service panels are front accessible. Removal for front access panel allows easier access to blower compartment and controls.
Technical support:Available at 888-865-3026.
Technical support materials:Submittals, service manuals, and installation manuals immediately available to contractors. Computerized system design software (LATS) also provides diagrams for refrigerant pipe layouts and equipment selection.
Noise-reduction features:Internal insulation installed at factory.
IAQ equipment supported:Access panel for field-supplied filters.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Compact size, low sound levels, orientation as vertical or horizontal left, optional electric heat kit, and built-in filter rack.
Warranty information:Two-year operational parts.
Special installation requirements:Factory-installed electronic expansion valve eliminates the need to field install an external expansion device.
Contact:LG Electronics USA, 312-397-6064; www.lghvac.com.
eProduct 193
Footprint (inches):22 (length) by 31 (width) by 44 (height)
Serviceability features:Pipe connections and service panels are front accessible. Removable front panel allows easier access to compressors and controls.
Technical support:Available at 888-865-3026.
Technical support materials:Submittals, service manuals, and installation manuals are available to contractors. Computerized system design software (LATS) provides diagrams for refrigerant pipe layouts and equipment selection.
Noise-reduction features:Inverter scroll compressor reduces sound levels.
IAQ equipment supported:IAQ products not applicable for this product.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:The compact size (up to 16 tons in a single chassis) allows installation in smaller mechanical rooms, giving back floor space. Front pipe connections allow units to be stacked with an independent racking system. Also has geothermal capability.
Warranty information:Two-year operational parts, six-year refrigerant system parts.
Special installation requirements:Units connect to Multi V indoor units that have factory-installed electronic expansion valves. Manufacturer provides Y-branch connectors, headers, and heat recovery units to help reduce the labor and material costs of refrigerant pipe installation.
Contact:LG Electronics USA, 312-397-6064; www.lghvac.com.
eProduct 194
Magic Pak
Model:TenMCE4-10-241P-1 electric cooling unit with added heatFootprint (inches):24 (length) by 28 (width) by 48 (height)
Serviceability features:Prewired and precharged. Color-coded wiring. Easier service access. Self-contained factory-installed heat internal washable filter.
Technical support:Available at 800-448-5872.
Technical support materials:Technical spec sheets, installation instructions, architectural and engineering guides.
Noise-reduction features:Fully insulated cabinet.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Completely self-contained; no outside condensing unit (installed in outside wall). No external refrigerant lines. No separate cooling coil. Four-speed, permanently lubricated motor for low maintenance, maximum efficiency, and wide airflow range. Individually metered and controlled. Easier to install and service.
Warranty information:Five-year limited all parts.
Special installation requirements:Manufacturer did not specify.
Contact:Allied Air Enterprises, 803-738-4060; www.magic-pak.com.
eProduct 195
Marvair
Model:GeoScholar III VWIA water-to-air heat pumpFootprint (inches):48 (length) by 29 (width) by 83 (height)
Serviceability features:Two front doors allow all service from the front or side of the unit, no need to slide unit away from the wall. Refrigerant access ports standard.
Technical support:Available 8 a.m.-5 p.m. Eastern, Monday-Friday at 229-273-3636.
Technical support materials:Product data sheet, wiring diagrams, installation manual, operation and service manual, and an engineer’s design manual.
Noise-reduction features:Specially designed interior panels convert sound to heat energy, resulting in the sound being absorbed. A low-vibration scroll compressor ensures quieter operation as well as energy efficiency. The indoor air mover utilizes an electronically commutated motor, which consumes a minimum of power with quiet operation. The ECM automatically adjusts its speed to maintain the proper airflow at various external static pressures.
IAQ equipment supported:Various ventilation options include the GreenCube energy recovery ventilator, manual or motorized fresh-air dampers. Pressure relief is integral to the unit on most ventilation configurations.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Ideal self-contained HVAC system for classrooms. Water-side economizer, high-efficiency filters, optional factory-mounted BACnet controller, can be installed against an exterior wall for ventilation air or against an interior wall if a central ventilation system is used in the school.
Warranty information:One-year parts, five-year compressor.
Special installation requirements:Self-contained systems require no field charging. Installer must bring power to the unit, dispose of condensate and, if required, provide access to an outside wall if ventilation through the unit is desired.
Contact:Marvair, 229-273-3636; www.marvair.com.
eProduct 196
McQuay
Model:AGZ-D air-cooled scroll chillerFootprint (inches):257 max. (length) by 88 (width) by 100 (height)
Serviceability features:Key components located on the perimeter of the unit for access and serviceability, include compressors, filter-driers, etc.
Technical support:Product-specific operation and maintenance courses offered for owners and operators. Support available through McQuay Service offices across North America (see “service locator” function online).
Technical support materials:Each chiller is shipped with installation, operation, and maintenance manuals, which include installation requirements, wiring diagrams, and troubleshooting information. These manuals, along with replacement parts information, can also be found online.
Noise-reduction features:Compressor sound attenuation is available.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Chillers provide quieter, energy-efficient operation, especially at reduced loads, and application flexibility with options such as variable-speed, unit-mounted pumping packages, and remote evaporators. Chillers install with reduced operational clearance requirements to as little as 4 feet between multiple units.
Warranty information:Standard factory warranty for one year from date of equipment start-up, but limited to not more than 18 months from shipment. Contact local distributor for job-specific inquiries beyond the standard warranty period.
Special installation requirements:All unit installation requirements can be found in the AGZ-D installation manual shipped with the unit or by visiting website.
Contact:McQuay International; www.mcquay.com.
eProduct 197
Footprint (inches):Manufacturer did not specify.
Serviceability features:Internal components are serviceable via hinged access doors located on both sides of the unit.
Technical support:Contact nearest rep for technical support.
Technical support materials:Supplied with certified drawings, installation manuals, and wiring schematics.
Noise-reduction features:Furnished with an airfoil plenum fan for exceptional low-frequency sound performance. The supply fan assembly has spring vibration isolators for reduced building mechanical vibration.
IAQ equipment supported:The unit features double-wall construction for easier interior cleaning. The unit also features standard prefilter and final-filter racks. Optional energy recovery wheel with purge option helps prevent cross contamination of return air to the supply airstream.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:These rooftop units are commonly used in variable air volume applications, with five stages of capacity control for discharge air control.
Warranty information:One-year standard parts, optional five-year compressor parts, optional 10-year gas furnace parts, optional one- to five-year complete unit parts.
Special installation requirements:Manufacturer did not specify.
Contact:McQuay International, 763-553-5157; www.mcquay.com.
eProduct 198
Mitsubishi Electric Cooling and Heating Solutions
Model:PUHY split systemFootprint (inches):30 (length) by 48 (width) by 65 (height)
Serviceability features:Features easy piping and maintenance design. Built-in diagnostics direct a technician to a specific issue. Reliable system components mean worry-free maintenance issues, the company said.
Technical support:Available at 877-391-5550 8 a.m.-7 p.m. Eastern.
Technical support materials:Diagrams, troubleshooting FAQs, installation instructions, submittals, and spec sheets available online.
Noise-reduction features:The quieter operation can be attributed to the units’ compressor compartments, which are sealed by metal panels to minimize sound levels in all directions.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The low-ambient cooling solution makes it possible to provide 100 percent cooling capacity and outdoor temperatures down to -10°F. Modular units are lightweight and compact and units are flexible enough to cool or heat up to 50 individual zones.
Warranty information:Seven-year compressor, one-year parts.
Special installation requirements:Manufacturer did not specify.
Contact:Mitsubishi Electric Cooling and Heating Solutions, 678-376-2900; www.mehvac.com.
eProduct 199
Footprint (inches):13 (length) by 37 (width) by 53 (height)
Serviceability features:Designed with easier service and maintenance in mind. Maintenance points located behind access panels to make installation and service easier for a trained technician. Four-way piping access allows connection in four directions: front, rear, right, and bottom.
Technical support:Available at 877-391-5550, 8 a.m.-7 p.m. Eastern.
Technical support materials:Diagrams, troubleshooting FAQs, installation instructions, submittals, and spec sheets available online.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:Indoor units equipped with washable, long-life, anti-allergen filters that improve air quality and save money by being washable.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Low-ambient cooling, down to 0°F outdoors (with wind baffle), perfect for computer network centers and equipment that need cooling, said the company. Controller uses RedLINK technology to communicate through radio frequency, allowing wireless controller(s) to be placed in a different room than the indoor units; no wires need to be run through the walls. The Portable Central Controller (PCC) gives users the freedom of climate control of up to 16 zones.
Warranty information:Limited five-year parts and defects, seven-year compressor.
Special installation requirements:No.
Contact:Mitsubishi Electric Cooling and Heating Solutions, 648-376-2890; www.mehvac.com.
eProduct 200
Multistack
Model:MS85X modular water-to-water chillerFootprint (inches):66 (length) by 32 (width) by 68 (height)
Serviceability features:Serviced by trained HVAC technicians. No special parts or service procedures, most components are off-the-shelf items. Hermetically sealed scroll compressors. Periodic cleaning of brazed-plate heat exchangers. Included 30-mesh strainers in headers.
Technical support:Available at 608-366-2400, Monday-Friday 8 a.m.-5 p.m. Central.
Technical support materials:Installation and operations manual. Wiring diagrams, service and parts.
Noise-reduction features:Standard or with sound attenuation kit.
IAQ equipment supported:Water-to-water chiller combines into a two- or four-pipe chilled-water system.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:An 85-ton chiller with a very small footprint. Can be connected to additional modules to create the size needed. Dual compressor with independent refrigerant circuits for redundancy. Single-point power and electrical connections for installation. Run only as many modules needed to meet the building load for energy efficiency.
Warranty information:One-year parts standard. Optional five-year parts and labor available.
Special installation requirements:None.
Contact:Multistack, 608-366-2400; www.multistack.com.
eProduct 201
Rheem Manufacturing Co.
Model:RKKL-B package gas/electric seriesFootprint (inches):86 (length) by 125 (width) by 57 (height)
Serviceability features:Access to all major compartments is from the front of the unit, including the filter and electrical compartment, blower compartment, furnace section, and outdoor section. Each panel is permanently embossed with the compartment name. Electrical and filter compartment access is through a large, hinged access panel. The drain pan is made of material that resists the growth of bacteria and is sloped. Drain pan slides out for cleaning.
Technical support:Available at 479-648-4900.
Technical support materials:List spec catalogs, I/O manuals, and a parts list.
Noise-reduction features:Scroll compressor on isolation grommets, balanced fan blades, balanced blower wheels, gasket between sheet metal.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Manufacturer did not specify.
Additional features:Designed from the ground up with the latest features and benefits required to compete in today’s market. The clean design is a testament to the quality, reliability, ease of installation, and serviceability that goes into each unit, the company said. Every package unit uses an electro-deposition, baked-on enamel tested to withstand a 1,000-hour salt spray test.
Warranty information:Ten-year heat exchanger, 10-year compressor (one-phase)/five-year (three-phase), one-year parts.
Special installation requirements:No.
Contact:Rheem Manufacturing Co., 479-648-4311; www.rheem.com.
eProduct 202
Footprint (inches):86 (length) by 125 (width) by 57 (height)
Serviceability features:Access to major compartments is from the front of the unit, including the filter and electrical compartment, blower compartment, furnace section, and outdoor section. Each panel is permanently embossed with the compartment name. Electrical and filter compartment access is through a large, hinged access panel. The sloped drain pan is made of material that resists the growth of bacteria. Drain pan slides out for cleaning.
Technical support:Available at 479-648-4900.
Technical support materials:List spec catalogs, I/O manuals, and a parts list.
Noise-reduction features:Scroll compressor on isolation grommets, balanced fan blades, balanced blower wheels, gasket between sheet-metal.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Designed from the ground up with the features and benefits required to compete in today’s market. Every package unit uses an electro-deposition, baked-on enamel tested to withstand a 1,000-hour salt spray test.
Warranty information:Five-year compressor, five-year heater element, one-year parts.
Special installation requirements:No.
Contact:Rheem Manufacturing Co., 479-648-4311; www.rheem.com.
eProduct 203
Robur
Model:RTAR Series modular gas-fired absorption heat pumpsFootprint (inches):Manufacturer did not specify.
Serviceability features:Units contain self-diagnostic microprocessor control for maintenance and servicing. Complete with four-digit LED readout to display supply and return water temperatures, diagnostic codes, unit parameters, and fault history.
Technical support:Available at 888-424-1800, 8 a.m.-5 p.m. Monday-Friday, except holidays, as well as through email and local reps.
Technical support materials:Product installation, start-up, and maintenance manuals contain wire diagrams, diagnostic codes, and service instructions.
Noise-reduction features:No mechanical compressors, so noise is only from variable-speed condenser fan.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The first gas-fired, reversible-cycle, air-to-water heat pump modules available; offers the highest gas-fired heating efficiencies available, the company says.
Warranty information:Up to five years when installed by a certified contractor. Optional extended warranty available.
Special installation requirements:Closed-loop hydronic heating and cooling system requirements.
Contact:Robur Corp., 812-424-1800; www.roburcorp.com.
eProduct 204
Tempstar
Model:RAS090-150 package air conditionerFootprint (inches):88 (length) by 60 (width) by 41-49 (height)
Serviceability features:All connections and troubleshooting points located in the master terminal board. Units feature through-the-base utility connections capability. Access panels feature easier-grip handles and no-strip screws. Designed to allow accurate readings of condenser pressure with panels on.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information posted online includes spec sheets, installation-operation manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand-control ventilation capability (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Units feature field-convertible airflow, high- and low-pressure switches. Scroll compressor has internal line-break overload protection. Refrigerant circuits contain a liquid line filter-drier to trap dirt and moisture. Factory-installed options include medium- and high-static indoor fan option.
Warranty information:Five-year limited compressor, one-year limited all other parts.
Special installation requirements:Optional accessory field-installed electric heaters available in multiple kW sizes and voltages.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.gotempstar.com.
eProduct 205
Footprint (inches):128-142 (length) by 86 (width) by 49 (height)
Serviceability features:Units have provisions for through-the-bottom power-entry capability. All connections and troubleshooting points located in the master terminal board. Access panels feature easier-grip handles and no-strip screws. Large, laminated control wiring and power wiring drawings affixed to unit.
Technical support:Factory-trained Technical Service Advisors (TSAs) on staff at local distributors provide technical assistance, troubleshooting at the local level. Technical training is available at field schools held at participating distributor locations.
Technical support materials:Product information online includes spec sheets, installation-operation manuals.
Noise-reduction features:Quiet and efficient operation is provided by belt-driven evaporator fans.
IAQ equipment supported:Two-inch return air filters. Optional economizer control accepts CO2 sensor for IAQ capability. Accessory duct-mounted CO2 sensor available for field installation to provide demand-control ventilation capability (DCV).
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:Dedicated vertical or horizontal airflow duct configuration models. Unit features high- and low-pressure switches, freeze-protection thermostats. Scroll compressor has internal line-break overload protection. Factory-installed options include medium- and high-static indoor fan option.
Warranty information:Five-year limited compressor, one-year limited all other parts.
Special installation requirements:None.
Contact:International Comfort Products (ICP) LLC, 800-315-4370; www.gotempstar.com.
eProduct 206
Trane
Model:IntelliPak™ evaporative condensing unitFootprint (inches):Manufacturer did not specify.
Serviceability features:Designed for service access, to promote cleaning and maintenance. and to support maintaining product efficiencies throughout the life of the product.
Technical support:Manufacturer did not specify.
Technical support materials:Manufacturer did not specify.
Noise-reduction features:Manufacturer did not specify.
IAQ equipment supported:A full line of IAQ features/options include internally lined units, pre and final filter options, airflow measurement integration, and humidity control.
Thermostat compatibility:Compatible with most thermostats.
Replacement parts compatibility:Shares replacement parts with other models.
Additional features:The integral evaporative condensing option has been completely redesigned to offer premium efficiency and improved quality and reliability. Microprocessor controls provide building owners and contractors with powerful and flexible packaged rooftop units. System efficiency improvements of 30-50 percent are common.
Warranty information:All applicable standard and extended warranties.
Special installation requirements:Requires the installation-operation of factory-installed Dolphin Water Care, or field-installed water treatment system prior to Trane startup. This protects the unit from running with untreated water, which could negatively impact the expected life of the unit.
Contact:Trane, 612-381-9554; www.trane.com.
eProduct 207
Footprint (inches):Varies
Serviceability features:Full-size access doors for cleaning; fully removable coil and access panels; smooth, cleanable interior double-wall surfaces; coils raised out of drain pan to allow easier access to drain pan for cleaning; antimicrobial treatments for drain pans and filters.
Technical support:Available at 877-788-7263 (877-78-TRANE).
Technical support materials:Installation, operation, and maintenance manual CLCH-SVX07C-EN.
Noise-reduction features:Silencers.
IAQ equipment supported:Cool Dry Quiet (CDQ™) desiccant dehumidification system. Energy recovery wheels. Split dehumidification units. Trane Catalytic Air Cleaning Systems (TCACS). Traq damper airflow monitoring station to control and document outdoor airflow. Piezometer ring on centrifugal and plenum fans to measure inlet airflow. HEPA filters.
Thermostat compatibility:Manufacturer did not specify.
Replacement parts compatibility:Manufacturer did not specify.
Additional features:Performance meets EarthWise™ design philosophy, incorporating high-efficiency air handlers and water chillers with low flow rates and low temperatures. Tightest casing in commercial ARI market. System optimization with reduced emissions. Lowest installed cost.
Warranty information:Standard warranty.
Special installation requirements:Manufacturer did not specify.
Contact:Trane, 612-381-9554; www.trane.com.
eProduct 208
York by Johnson Controls
Model:YVAA air-cooled, variable-speed screw chillersFootprint (inches):Manufacturer did not specify.
Serviceability features:Simpler in design with easier access to service components for operation and maintenance.
Technical support:Detailed service literature.
Technical support materials:Installation/operation/maintenance literature, wiring diagrams, service/troubleshooting information, parts literature.
Noise-reduction features:In addition to a variety of sound-attenuation options, the SilentNight™ feature works with a BAS (or programmable control) to load-limit the chiller when noise reduction is a priority.
IAQ equipment supported:Manufacturer did not specify.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Featuring the industry’s lowest kW/ton at both full-load design and off-design conditions, this chiller ensures efficient operation under all operating conditions. On replacement projects, its energy performance can exceed that of older chillers by as much as 50 percent.
Warranty information:One-year parts.
Special installation requirements:None. The unit is delivered to site fully assembled, with all interconnecting refrigerant piping and internal wiring ready for field installation, and charged with refrigerant and oil by the manufacturer.
Contact:Johnson Controls, 717-771-6365; www.johnsoncontrols.com.
eProduct 209
Footprint (inches):188 (length) by 65 (width) by 93 (height)
Serviceability features:Highest uptime operation with fewer parts. Field serviceability and fully trained service support.
Technical support:Detailed service literature.
Technical support materials:Installation-operation-maintenance literature, wiring diagrams, service-troubleshooting information, parts literature.
Noise-reduction features:The quietest performance available in the market made possible, in part, through the use of OptiSound™ control and the employment of magnetic bearing technology.
IAQ equipment supported:Offers lower direct and indirect environmental impact through reduced total energy consumption; a leak-free design using environmentally friendly R-134a; 30 percent lower refrigerant charge than traditional systems. Elimination of oil from the system due to use of magnetic-bearings system.
Thermostat compatibility:Requires a special thermostat.
Replacement parts compatibility:Some shared parts, some unique.
Additional features:Addresses the most pressing concerns of facility owners and designers - energy, sustainability, sound, and uptime - by integrating chiller innovations with the benefits of active magnetic-bearing technology. The chillers offer 10 percent better efficiency than conventional, variable-speed chillers, said the company.
Warranty information:One-year parts.
Special installation requirements:Chillers designed to keep installation costs low. Where installation access is not a problem, the unit can be shipped completely packaged, including the unit-mounted OptiSpeed™ variable-speed drive, requiring minimal piping and wiring to complete the installation.
Contact:Johnson Controls, 717-771-6365; www.johnsoncontrols.com.
eProduct 210
Publication date:05/02/2011
Report Abusive Comment