JS Humidifiers plc: Evaporative Humidifier
September 8, 2008
The HumEvap MC3 in-duct evaporative humidifier is located inside a duct or air-handling unit and humidifies by passing the air through a wetted fiber matrix. The humidifier is suitable for any size duct and can deliver huge volumes of moisture to an atmosphere with very close control. It runs on 500W of electricity. The new humidifier also has the added benefit of providing up to 53.6°F (12°C) evaporative cooling to the air being humidified. This can reduce the demand on air conditioning chillers, further reducing a building’s energy consumption and carbon footprint. The control panel on the HumEvap MC3 can be situated up to 100m away from the evaporative module and has a multilingual interface. It is compact in size and gives digital control over desired relative humidity and temperature levels of the air leaving the matrix. It also controls flush, drain, and water quality maintenance features, as well as operating times on a 24-hour, seven-day programmable timer. The digital display provides comprehensive real-time feedback on current relative humidity and temperature, demand, hours run, system operating status, and whether maintenance is required. The HumEvap MC3 incorporates a PureFlo Ag+ silver ion dosing system, which prevents the buildup of microorganisms and bacteria throughout the humidifier.
JS Humidifiers plc, Artex Ave., Rustington, Littlehampton, West Sussex, BN16 3LN, England; +44 (0)1903 850200; +44 (0)1903 850345 (fax); www.jshumidifiers.com